CabCAM CDW7M1C User manual

Operating Instructions
2.4G Digital 7" Wireless Color LCD Monitor
Please read this manual thoroughly before operating thedevice, keep it for future reference.
V 1.2

Contents
1. Precautions ............................................................................................... 1
2. Features .................................................................................................... 3
3. Technical Specifications ............................................................................ 3
4. Accessories............................................................................................... 4
5. Parts Identification..................................................................................... 5
6. Remote Control Operation......................................................................... 6
7. Basic Operation......................................................................................... 8
8. Menu ....................................................................................................... 10
9. Recording Time ....................................................................................... 16
10. Waterproof Camera ............................................................................ 176
11. Troubleshooting.................................................................................... 17
Special Notice
The product is aimed at assisting in safe driving and provides the driver with a broader field of vision. As the
driver, you are solely responsible for the appropriate operation of your vehicle and the safety of your
passengers and pedestrians, and you should abide all state and local traffic laws and regulations. Do not
over use any features of this system that it might distract you from safe driving. The top priority of your
driving should always be the safe operation of your vehicle. A&I Products Inc will not accept any
responsibility/recourse whatsoever for accidents and/or injuries resulting from failure to observe these
precautions or safety instructions.

~1~
1. Precautions
●Storage and Keeping
(1) Do not expose the monitor to excessive heat or cold. The storage temperature of this device is
-30~+80℃, and the operating temperature is -20~+70 ℃. The humidity isRH90%.
(2) Never use this device near a bathtub, wash basin, kitchen, damp basement, swimming pool or
similar places.
(3) Never use this device in environments with excessive moisture, dust orsmoke.
(4) Avoid dropping or striking this device.
(5) Avoid using this device in enclosed spaces, areas with excessive vibration or subject to severe
impacts.
(6) Never puncture, scratch or use abrasive cleaning materials on thisdevice.
(7) Do not place cables where they may be pinched or steppedon.
(8) Leave at least a 2" space between the monitor and walls, cabinets or other objects toallow
adequate air circulation around the device.
(9) The monitor is not designed to be waterproof.
●Operating Precautions
(1) The device may be powered by a 12 or 24 volt automotive battery or vehicle electrical system.
(2) Make sure all cables are connected properly. Observe polarity. Improper cable connections
may damage the monitor. Remove the power cable connections when you do not intend to
use the device.
Warning!
1. High voltage is present within the monitor. The opening of the case should be by professionals.
2. Do not watch the video while driving unless you are monitoring the rear view camera display.
Special Notice
Occasionally, a few highlights or dark spots may occur on the LCD screen. This is a very common
phenomenon in active matrix display technology, and doesn’t necessarily indicate any defects or faults.
Never try to repair this device by yourself. In case of any problems, please turn off the display at once
and notify our company or authorized dealer. The monitor is a complex device. Any disassembly or
modification may lead to damage and void the warrantee.

~2~
●Maintenance
(1) Remove all the cable connections from the monitor before cleaning thedevice.
(2) Use a mild household detergent and clean the unit with a slightly damp, soft cloth. Never use
strong solvents such as thinner or benzine, as they might damage thefinish of the device.
This symbol is intended to alert the user to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may be of sufficient magnitude to
constitute risk of electric shock to persons.
This symbol is intended to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature accompanying the
appliance.
This symbol is intended to alert the user not to waste electrical and electronic
equipment.
CAUTION
You are cautioned that any changes or modifications not expressly approved in this manual
could void your warrantee and necessitate expensive repairs.
●Declaration of conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
RISK OF ELECTRIC SHOCK
DO NOT OPEN

~3~
2. Features
① TFT LCD monitor with wide angle view and high resolution display.
② NORMAL, MIRROR, FLIP and MIR-FLIP viewing available.
③ Split mode, auto-scan mode and single-display mode available.
④ Auto pairing: Auto pairing happens when camera is activated.
⑤ Support 4-channel composite and single-channel recording in AVI signal format.
⑥ Auto dim function available.
⑦ Full-function remote control.
⑧ 4 wireless camera input.
⑨ Multiple video formats: PAL / NTSC.
⑩ Wide voltage input: 10 - 32V.
⑪ On-board speaker.
⑫ Auto switch to the working channel when trigger is activated
3. Technical Specifications
Item
Technical Specification
LCD size
7"
Resolution
800 x 3 (RGB) x 480
Contrast
500:1
Brightness
400 cd/m²
Viewing Angle
U: 50 / D: 70, R/L: 70
Dot pitch
0.0642(W) x 0.1790(H)
Aspect Ratio
16:9
Channel
4 channels
Operating Frequency
2400 - 2483.5MHz
Receiving Sensitivity
-89dBm
Decompression Form
MPEG4
Modulation
2.4G FSK/GFSK
Time Delay
120ms
Transmitting Distance
120M
Micro-SD /TF Card
Max. 128GB
System Format
PAL / NTSC
Power Supply
DC 10-32V
Power Consumption
Max. 6W
Loudspeaker
1.5W/8Ω
Operating Temperature
-20~+70ºC,RH90%
Storage Temperature
-30~+80ºC,RH90%
Special Notice
All specifications are subject to change without notice.

~4~
4. Accessories
U-Support Bracket
Center Mount Bracket
Sun Shield
Power Cable
Angle Adjustment Screws
IR Remote Control
Special Notice
Accessory supply may be different for different application.

~5~
5. Parts Identification
Press OK button to
enter menu item or save
user settings.
Press OK button -
shortcut for start/stop
recording.
Digital Color
LCD screen
Power indicator
Remote control
sensor
Light level
Power switch
Volume decrease
Volume increase
Select channels
Loudspeaker
Menu
●Press OK button to enter
menu item or save user
settings.
●Press OK button –
shortcut for start/stop
recording.
●Press OK button for 3
seconds - shortcut for
PAIRING.
Micro-SD /TF Card Slot
Mounting bracket installation

~6~
6. Remote Control Operation
Press to select MUTE
or enable sound
Press to turn on/off
the monitor
Press to show menu or
exit menu
Volume decrease and
menu selection left
Jump key selector.
Fast jump to the
display mode specified
by SYSTEM
PAL/ NTSC TVsystem
Fast pairing when
camera is activated
selector
Press OK button to enter
menu item or save user
settings.
Press OK button –
shortcut for start/stop
recording.
MIR-Flip selection
Volume increase and
menu selection right
PAL / NTSC TV system
selector

~7~
●MUTE (Mute)
Press to select MUTE or enable sound
●POWER (Power switch)
Press to turn on / off the monitor.
●OK
Press OK button to enter menu item or save user settings. Press OK button - shortcut for
start / stop recording.
●MENU
Press to display menu or exit menu
●VOL
Volume decrease and menu selection left
●VOL
Volume increase and menu selection right
●SEL
Jump key selector. Fast jump to the display mode specified by SYSTEM SETUP - JUMP
KEY
●PAIR
Fast pairing when camera is activated
●SYS
PAL / NTSC TV system selector
●MIR
MIR-Flip selection

~8~
7. Basic Operation
7.1 Installation of Center Mounting Bracket:
①Adjust monitor level by sliding the support
to the desired height.
②Adjust the angle of the monitor and
tighten the knob on the center mounting
bracket.
Support attaching piece
Knob
7.2 Installation of U-support Bracket
Red wire to positive power supply
of DC/10-32V. Black wire to
Ground.
Brown wire to positive power wire of reversing light.
White wire to positive power wire of
left light . Blue wire to positive
power wire of right light . Green or
yellow wire to other positive power
wire.
Camera
DC/ 12V
Battery
Video inputs
Angle adjustment
screws
Automobile
application