Cablematic VD047 User manual

USER MANUAL
Digital to Analog Audio Converter
Dear Customer
Thank you for purchasing this Audio Converter. For optimum performance and safety, please read
these instructions carefully before connecting, operating or adjusting this product. Please keep this
manual for future reference
1.0 Introduction
This Digital to Analog Audio Converter is designed for either home or professional audio
switching .It converts Coaxial or Toslink digital audio signals to analog L/R audio and available
for connection to an external device such as an amplifier via standard RCA-style jacks. This
Converter is small in size and quite easy to install.
2.0 Feature
* Converts Coaxial or Toslink digital audio signals to analog L/R audio
* Supports sampling rate at 32. 44.1. 48 and 96KHz
* 24-bit s/PDIF incoming bit stream on left and right channel
* Provides electromagnetic-noise-free transmission
* Easy to install and simple to operate
3.0 Specification
Input audio
Toslink audio and Digital audio
Output audio
L/R audio
Input audio connector
Toslink,1XRCA(coaxial)
Output audio connector
2XRCA(R/L)
audio connector
Toslink audio and Digital audio
Sampling rate
32,44.1,48 and 96KHz
Limited Warranty
1 Year Parts and labor
Operating Temperature
0℃ to 70℃
Operating Humidity
10% to 85%} RH (no condensation)
Storage Temperature
-10℃ to +80℃
Storage Humidity
5% to 90%} RH (no condensation)
External Power Supply
5V DC @1A
Power consumption
0.5Watts(max)
Converter Unit Certification
FCC.CE, RoHS
Power Supply Certification
FCC.CE, RoHS
Power Adapter
US, UK, EU, AUS Standard
User Manual
English Version
Note: Specification is subject to change without notice.

4.0 Package Content
1) Main unit
2) 5V DC power Supply
3) User Manual
5.0 Panel Descriptions
6.0 Connection and Operation
Before installation, please make sure all devices you wish to connect have been turned off
1) Connect the audio source device to the Converter using appropriate R/L cable
2)Connect the A/V Receivers or Amplifiers to the Converter using appropriate Toslink or Coaxial
cable.
3)Insert the DC side of 5v power supply into the converter and then connect the AC side of the
power supply into the wall outlet
Attention- plug in / unplug cable gently
6.1Connetion Diagram