Cablesson HDelity 1x2 User manual

Cablesson HDelity 1x2
Splitter with 4K2K and ARC
User Manual
© All rights reserved - CABLESSON© All rights reserved - CABLESSON

The Cablesson HDelity 1x2 HDMI Splitter with 4K2K & ARC has been tested for conformance to safety regulations
and requirements, and has been certified for international use. However, like all electronic equipments, the HDelity
1x2 Splittter should be used with care. Please read and follow the safety instructions to protect yourself from
possible injury and to minimize the risk of damage to the unit.
Follow all instructions and warnings marked on this unit
● Do not attempt to service this unit yourself, except where explained in this manual.
● Provide proper ventilation and air circulation and do not use near water
● Keep away from sharp objects that might damage the device and place the unit on a stable surface
● Use only Power Adapter, Power Cords and Connection Cables designed for this unit.
● Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
TABLE OF CONTENT
SAFETY AND NOTICE
!
Introduction 1
2
3
4
5
6
7
8
9
Topic Page No.
Features
Specifications
Package Contents
Panel Description
Connection Diagram
Hardware Installation
Notice
Warranty

The Cablesson HDelity 1x2 HDMI Splitter with 4K2K & ARC
provides the most cost effective and advanced HDMI Splitter
solution in the market, by which the high definition video and high
quality audio can be transmitted to 8 different locations without
losing quality. The HDelity 1x2 HDMI Splitter supports all 3D
formats and also the true 4K2K video. In addition to high
standard videos, it also supports ARC. With built-in RS-232
firmware update mechanism, the compatibility among countless
HDMI sources and receivers can be further guaranteed. With the
upmost 16-bit Deep Colour video and High definition audio
support, the HDelity 1x2 HDMI Splitter with 4K2K & ARC is
suitable for high quality broadcasting, digital signage and
education applications.
“We believe in creating
thoughtful products for you”
1 | Introduction 2 | Features
● Supports HDMI Deep Colour & 3D/DVI 1.0 compliant
● HDCP 1.3 compliant
● Wide frequency range: 25MHz~340MHz
● Video bandwidth: 10.2Gbps
●Supports ARC on output 2
● Resolution up to 4k2K 297MHz video
● Automatic EDID Learning
● Supports xvYCC, x.v.Colour & Deep Colour
● RS-232 firmware update for expanding compatibility
● Supports Dolby Digital, DTS-HD and Dolby True-HD audio
● Easy installation
Cablesson HDelity 1x2 HDMI Splitter with 4K2K & ARC
“A product that will
exceed your expectations”

3 | Specifications
MECHANICAL SPECIFICATIONS
PACKAGE CONTENTS
● 1x Cablesson HDelity 1x2 HDMI Splitter
● 1x DC 5V 4A in-line with C7 power cord
● 1x User Manual
TECHNICAL SPECIFICATIONS
4 | Package contents
Role of usage
HDMI compliance
DVI compliance
HDCP compliance
Video bandwidth
Video support
Audio support
ESD protection
PCB stack-up
Firmware update
ARC
Input
Output
HDMI connector
Cablesson HDelity 1x2 HDMI SPLITTER
[1] Human body model — ±19kV [air-gap discharge] & ±12kV [contact discharge]
[2] Core chipset — ±2kV
1x2 Distribution Amplifier (Splitter)
Deep Colour & 3D
DVI 1.0
HDCP 1.3
Single-link 340MHz [10.2Gbps]
Up to 4K 2K 297MHz
DTS-HD Master Audio, Dolby TrueHD Dolby Digital,
DTS, DVD-Audio, LPCM, SACD, MPCM
4-layer board [impedance control — differential 100Ω; single 50Ω]
Feasible via RS-232 port
Yes
1x HDMI [7.1ch audio & video]
2x HDMI [7.1ch audio & video] + ARC
Type A [19-pin female]
Technical
Automatic EDID learning will detect all the connected HDMI
equipped monitors and analyze all the content of EDID. The
EDID with minimal resolution support will be the reference
EDID for incoming HDMI source players.
i
Cablesson HDelity
Mechanical
Cablesson HDelity 1x2 HDMI SPLITTER
MECHANICAL SPECIFICATIONS
Housing
Dimensions
(L x W x H)
Model
Package
Carton
Weight
Fixedness
Power supply
187 x 87 x 25mm [7.4" x 3.4" x 1"]
Metal enclosure
264 x 170 x 77mm [10.4" x 6.7" x 2.8"]
Model
Package
463g [16.3 oz]
946g [1.0 lbs]
420 x 358 x 291mm [1'5" x 1'2" x 11.5"]
1RU rack-mounting case with ears
5V 4A DC
Cablesson HDelity
Cablesson HDelity
Mechanical
Cablesson HDelity 1x2 HDMI SPLITTER
Power consumption
Storage temperature
Relative humidity
-20~60°C [-4~140°F]
20~90% RH [no condensation]
Operation temperature 0~40°C [32~104°F]
10 Watts [max]

5 | Description
PANEL DESCRIPTION
6 | Connection Diagram
CONNECTION DIAGRAM
Rear Panel
1. Signal LED: Signal LED indicator
2. HDMI IN: Connect to an HDMI input source
3. HDMI OUT1: Distributed HDMI outputs to HDMI displays
4. HDMI OUT2: Distributed HDMI outputs to HDMI displays
5. ARC: Audio Return Channel (ARC) of HDMI OUT2
6. RS-232: For technical support only (firmware update)
7. Dip Switch: Switch between normal operation mode or firmware update mode (switch ON)
8. Power LED: Lights on when power is ON
9. +5V DC: Connect to the +5VDC 4A power supply unit
Cablesson HDelity 1x2 HDMI Splitter with 4K2K & ARC
15
234679
8

8 | Notice
NOTICEHARDWARE INSTALLATION
Broadcasts HDMI signal to 2 HDMI displays!
1. Switch-Off all devices, including monitors.
2. Connect to the receivers (Connect HDMI OUT2 to a TV is recommended)
3. Connect ARC to an AMP (If HDMI OUT2 is connected to a TV)
4. Connect an HDMI source (such as a Blu-ray Disc player) to the HDMI In
5. Plug-in 5V DC power supply
6. Power On the HDMI monitors
7. Power On the HDMI source
7 | Hardware Installation
1. While connecting a new monitor to the Splitter, experiencing a short period of time without display might be
expected. The Splitter will do Automatic EDID learning which analyzes the newly connected monitor to see if the
EDID for the HDMI input is necessary to update!
2. For firmware update through RS-232, users MUST turn the Power Off, set the dip switch to “ON”, and then
connect an RS-232 cable between PC and device. Open the firmware update software, set the correct com port
and baud rate (57600 is recommended), click the “File” button to direct to the firmware HEX or BIN file, power on
the device and press “Program MCU” symbol to firmware update. Once update process is done, please power off
the device and set the dip switch back to “1”.

9 | Warranty
LIMITED WARRANTY
The SELLER warrants the Cablesson HDelity 1x2 HDMI Splitter with 4K2K & ARC free from defects in the material and
workmanship for 1 year from the date of purchase from the SELLER or an authorized dealer. If this product fails to be
in good working order within 1 year warranty period, The SELLER, at its option, will either repair or replace the unit,
provided that the unit has not been subjected to accident, disaster, abuse or any unauthorized modifications including
static discharge and power surge. This warranty is offered by the SELLER for its BUYER with direct transaction only.
This warranty is void if the warranty seal on the metal housing is broken.
Unit that fails under conditions other than those covered will be repaired at the current price of parts and labor in effect
at the time of repair. Such repairs are warranted for 90 days from the day of reshipment to the BUYER. If the unit is
delivered by mail, customers agree to insure the unit or assume the risk of loss or damage in transit. Under no
circumstances will a unit be accepted without a return authorization number.
The warranty is in lieu of all other warranties expressed or implied, including without limitations, any other implied
warranty or fitness or merchantability for any particular purpose, all of which are expressly disclaimed.
Proof of sale may be required in order to claim warranty. Customers outside Europe are responsible for shipping
charges to and from the SELLER. Cables and power adapters are limited to a 30 day warranty and must be free from
any markings, scratches, and neatly coiled.
The content of this manual has been carefully checked and is believed to be accurate. However, The SELLER assumes
no responsibility for any inaccuracies that may be contained in this manual. The SELLER will NOT be liable for direct,
indirect, incidental, special, or consequential damages resulting from any defect or omission in this manual, even if
advised of the possibility of such damages. Also, the technical information contained herein regarding the HDelity 1x2
HDMI Splitter features and specifications is subject to change without further notice.