Cadillac CT6 2020 User manual

CT6
Convenience &
Personalization Guide
2020
cadillac.com

2
Power Seat/
Memory Seat
Controls
Turn Signal
Lever/Exterior
Lamps Control
Windshield
Wipers
Lever
Forward Collision Alert/
Lane Keep Assist/
Heated Steering Wheel
Buttons♦
Cruise
Control/Voice
Recognition
Buttons
Instrument
Cluster/Driver
Information
Center♦
Power
Steering
Column
Control
Electric Parking
Brake Switch/
Head-Up Display♦
Controls
Hood
Release
(pull 2X
to open)
Trunk
Release
Review this quick reference guide for an overview of some important features in your Cadillac CT6.
Some optional equipment described in this guide (denoted by ♦) may not be included in your vehicle.
More information can be found in your Owner's Manual and at my.cadillac.com.
INSTRUMENT PANEL
Park Assist/Automatic
Parking Assist♦/Auto
Engine Stop-Start
Disable♦Buttons
Auto Hold♦/
Traction Control/
Driver Mode
Control Buttons
Audio Volume/
Infotainment
Controls
Audio Volume/
Driver
Information
Center Controls
Heated/
Ventilated
Seat Buttons♦/
Climate Controls
Audio Next/
Previous
Station
Controls
Engine
Start/Stop
Button
Hazard
Warning
Flashers/
Glove Box
Buttons
Infotainment
Touch
Screen
Electronic
Precision
Shift Lever
Certain restrictions, precautions and safety
procedures apply to your vehicle. Please read
your Owner’s Manual for complete instructions.

3
♦Optional equipment
REMOTE KEYLESS
ENTRY TRANSMITTER KEYLESS ACCESS SYSTEM
Lock
Press to lock all doors.
Press and hold for 1 second to fold the power
mirrors. To enable operation, go to Seings >
Vehicle > Comfort and Convenience.
Unlock
Press to unlock the driver’s door only or all doors.
Press and hold for 1 second to unfold the power mirrors.
Press and hold to open all windows.
Remote Start
Press and release the Lock buon and then immediately press
and hold to start the engine.
Vehicle Locator/Panic Alarm
Press and release to locate your vehicle. e exterior lamps ash
and the horn chirps 3 times.
Press and hold for 3 seconds to activate the alarm. Press it again to
cancel the alarm.
Trunk Release
Press twice to open the trunk. Press once to stop power trunk
operation.♦
Door Key
Press the buon on the side of the transmier to pull the door key
out of the transmier. Use the key to lock/unlock the driver’s door.
Note: To change or enable some Remote Lock and Unlock settings, go to
Settings > Vehicle > Remote Lock, Unlock, Start.
See Keys, Doors and Windows in your Owner’s Manual.
e Keyless Access System enables operation of the doors and
trunk without removing the transmier from your pocket or purse.
e transmier must be within 3 feet of the door being unlocked
or within 3 feet of the trunk.
KEYLESS UNLOCKING
With the transmier within range:
Press the buon on the
driver’s door handle to
unlock the driver’s
door; press it again
within 5 seconds to
unlock all doors.
Press the buon on a
passenger door handle
to unlock all doors.
Press the touch pad above the license plate to open the trunk.
KEYLESS LOCKING
With the ignition o, the transmier removed from the vehicle,
and all doors closed:
Press the buon on any door handle to lock all doors
immediately.
If Passive Locking is turned on, all doors will lock automatically
aer a short delay.
Note: To change the Keyless Locking and Unlocking settings, go to Settings
> Vehicle > Remote Lock, Unlock, Start.
See Keys, Doors and Windows in your Owner’s Manual.

4
KEYLESS START AUTO ENGINE STOP/START
(IF EQUIPPED)
e Remote Keyless Entry (RKE) transmier must be in the vehicle
to turn on the ignition.
START
With the vehicle in
Park or Neutral,
press the brake
pedal and then
press the ENGINE
START/STOP
buon to start the
engine. e green
indicator on the
buon will
illuminate.
Note: If the RKE transmitter battery is weak, place the transmitter in the
pocket in the center console storage area to enable the engine to start.
Replace the transmitter battery as soon as possible.
STOP/OFF
Shi to Park and press the ENGINE START/STOP buon to
turn o the engine.
Power will be available for 10 minutes to operate the audio system
until the driver’s door is opened and to operate the windows and
sunroof♦until any door is opened.
ACCESSORY
With the engine o and the brake pedal NOT depressed, press
the ENGINE START/STOP buon to place the ignition system
in the Accessory mode. e amber indicator on the buon will
illuminate.
See Driving and Operating in your Owner’s Manual.
A fuel-saving stop/start system has been integrated with the
engine. While driving, when the brake pedal is applied and the
vehicle is at a complete stop, the automatic engine stop/start sys-
tem may turn o the engine, depending on operating conditions.
When the engine is o, the tachometer gauge will read AUTO STOP.
Upon releasing the brake pedal or applying the accelerator pedal,
the engine will restart. Aer parking the vehicle and turning o the
engine, the tachometer gauge will read OFF.
e engine may remain running or restart when the vehicle is
stopped if:
• A minimum vehicle speed is not reached.
• e engine or transmission is not at the required operating
temperature.
• e outside temperature is not in the required operating range.
• e shi lever is in any gear other than Drive (D).
• e baery charge is low.
• e current seings for the climate control or defog system
have not been reached.
• e Auto Stop has reached the maximum allowed time.
AUTO ENGINE STOP/START DISABLE
Press the buon le of the infotainment screen when the
engine is running to turn o the system. e buon indicator is
not illuminated when the system is o.
e system automatically turns on each time the vehicle is started.
See Driving and Operating in your Owner’s Manual.

5
e automatic transmission
shi paern is displayed on
top of the shi lever. e
selected gear position illumi-
nates in red on the shi lever.
e shi lever always starts in
the center position and, aer
shiing, returns to the center
position.
Park – Press the buon (A) on
top of the lever to shi into
Park. To shi out of Park, press and hold the shi lock buon (B) on
the side of the lever while selecting the desired gear.
Reverse – Press and hold the shi lock buon (B) and move the
lever forward completely (past the detent) to shi into Reverse.
Neutral – Move the lever forward (to the detent) to shi into
Neutral.
Note: The transmission will not stay in Neutral for more than 5 minutes.
It may automatically shift into Park. See Automated Car Wash Mode.
Drive – Move the lever rearward to shi into Drive. If the vehicle is
in Park, press and hold the shi lock buon (B) while moving the
lever rearward.
Tap Shi Mode – With the transmission in Drive, pull back on the
lever to activate Manual Mode. Press the le steering wheel paddle
to downshi and the right paddle to upshi. Pull back on the lever
again to return to Drive.
AUTOMATED CAR WASH MODE
ere are dierent procedures for placing the transmission in
Neutral with the engine on or o and if the driver exits the vehicle.
Refer to your Owner’s Manual for each procedure.
See Driving and Operating in your Owner's Manual.
ELECTRONIC PRECISION SHIFT DRIVER MODE CONTROL
Driver Mode Control automatically adjusts the exhaust, suspension,
steering, brakes and powertrain calibrations.
Press the MODE buon on
the center console to select
the Tour, Sport, Snow/Ice or
Track
♦
(V-Series only) Mode.
DRIVER MODES
Tour Mode – Use in normal
driving for a smooth ride.
Sport Mode – Use where road conditions or personal preference
demand a more controlled response.
Snow/Ice Mode – Use during slippery conditions to help control
wheel speed.
Track Mode
♦
– Use when maximum vehicle handling is desired.
Customization Mode – Allows the engine sound, steering and
suspension features to be customized to your preference; go to
Seings > Vehicle > Driving Mode.
e mode features vary. Not all vehicles have all features.
A
B
♦Optional equipment
Mode Feature TOUR SPORT TCK SNOW/ICE
role Progression Tour Tour Track Snow/Ice
Transmission Shi Mode Tour Sport Track Tour
Engine Sound Tour Sport Track Tour
Steering Tour Sport Track Tour
Suspension
(Magnetic Ride Control
♦)
Tour Sport Track Tour
Traction and Stability Control Tour Tour Track Tour
See Driving and Operating in your Owner's Manual.

6
STEERING WHEEL CONTROLS
A. VOICE RECOGNITION
Push to Talk
Press to answer an incoming call or to
use voice recognition with the OnStar,
Bluetooth or infotainment system.
Press and hold to activate voice pass-
thru/Siri® Eyes Free.
End Call/Mute
Press to end/decline a call or mute the
audio system.
See your Cadillac User Experience Manual.
B. CRUISE CONTROL/ADAPTIVE
CRUISE CONTROL–ADVANCED
♦
On/O
SET– Set Speed
With Cruise Control on, press the SET–
buon to set the cruise speed.
RES+ Resume Speed
With Cruise Control on, press the RES+
buon to resume the previous set speed.
Adjust Speed
With a cruise speed set, press the RES+ or
SET– buon to the rst detent to increase
or decrease the set speed by 1-mph incre-
ments; press to the second detent to
increase or decrease the set speed to the
next 5-mph interval on the speedometer.
Cancel
Press to cancel Cruise Control without
erasing the set speed from memory.
Press and hold to switch between regular
Cruise Control and Adaptive Cruise Control–
Advanced♦.
When Adaptive Cruise Control–Advanced
is active, a green indicator illuminates
and the following gap is displayed.
Following Gap
(Adaptive Cruise Control–Advanced
♦
/
Forward Collision Alert
♦
)
Press to select a gap seing (the time
between your vehicle and a detected
vehicle) of Far, Medium, or Near.
See Driving and Operating in your Owner’s Manual.
C. AUDIO CONTROLS
+ –Volume
Press +or –to increase or decrease the
volume.
Next/Previous
Press or to go to the next or previous
favorite radio station or track.
See your Cadillac User Experience Manual.
D. DRIVER INFORMATION CENTER CONTROLS
Left/Right
Press to view the le or right cluster display.
Up/Down
Press to scroll up or down through a menu.
SEL Select
Press to select a highlighted menu item or to
clear a message.
E. HEATED STEERING WHEEL
♦
On/O
See Instruments and Controls in your Owner’s Manual.
F. LANE KEEP ASSIST
On/O
Press to turn Lane Keep Assist on or o.
See Driving and Operating in your Owner’s Manual.
B
F
BD
C
A
E
C

7
♦Optional equipment
CLUSTER DISPLAYS
Use the controls on the right
side of the steering wheel to
move through the dierent
cluster display zones.
Press the or to move
between the display zones.
Press the le to exit a
display menu.
Press the or to move through the menus.
Press the SEL (Select) buon to open a menu or select a seing.
RECONFIGURABLE INSTRUMENT CLUSTER
♦
e uplevel cluster display layout can be changed.
1. Use the controls to view the Options menu. Press SEL (Select).
2. Scroll to view Display Layout. Press the to view the layouts.
3. Scroll to highlight the desired layout. Press SEL.
4. Press the to exit the menu.
See Instruments and Controls in your Owner’s Manual.
INSTRUMENT CLUSTER DRIVER INFORMATION CENTER
e Driver Information Center (DIC) on the instrument cluster
displays a variety of vehicle information, including Info, Audio,
Phone, Navigation, and Options menus. e DIC Info menu features
commonly used trip and fuel information, including a digital speed-
ometer, trip displays and fuel range. e items in the Info menu can
be selected in the Info Pages menu.
INFO PAGES MENU
1. Use the controls on the right side of the steering wheel to view
the Options menu on the cluster. Press SEL (Select).
2. Scroll to view Info Pages. Press the to view the pages.
3. Scroll to move through the list of possible info pages.
4. Press SEL to select or deselect an item.
5. Press the to exit the menu.
See Instruments and Controls in your Owner’s Manual.
Uplevel cluster shown Uplevel cluster shown

8
e Head-Up
Display (HUD)
projects some
operating informa-
tion on the wind-
shield. Temporary
information, such
as audio changes
and navigation
maneuvers, also
may be displayed.
e HUD controls are located on the le side of the instrument
panel.
HUD
HUD
Li up or press down to adjust the position of the image. It cannot
be adjusted side-to-side.
INFO
Press to select from four displays: Speed View; Audio/Phone View;
Navigation View; and Performance View.
Brightness
Li up or press down to brighten or dim the display.
Hold down to turn o the display.
HUD Rotation
To adjust the angle of the HUD, use the DIC controls to view
Options > Head-Up Display Rotation. Press the or
control to adjust the angle.
See Instruments and Controls in your Owner’s Manual.
EXTERIOR LIGHTING
Rotate the control band to activate the exterior lamps.
O/On
AUTO Automatic Headlamp System
Automatically activates the Daytime Running Lamps (DRLs) or the
headlamps and other exterior lamps depending on outside light
conditions.
Parking Lamps
Headlamps
IntelliBeam System
With the lamp control in the AUTO or Headlamps position,
press the buon on the end of the lever to turn the automatic high-
beam system on or o.
A green indicator displays on the instrument cluster when the
system is on; a blue indicator displays when the high-beam
headlamps are on.
Note: IntelliBeam activates the high-beam headlamps only when driving
over 25 mph.
See Lighting in your Owner’s Manual.
HEAD-UP DISPLAY♦

9
SET MEMORY POSITIONS
With the ignition On or in
Accessory mode:
1. Adjust the driver's seat,
power outside mirrors
and power steering
column to the desired
positions.
2. Press and release the
SET buon on the
driver's door. A beep will sound.
3. Immediately press and hold buon 1or 2 until two beeps sound.
Use the buon that matches the Driver Information Center
welcome message indicating driver 1 or 2.
To store driver's seat and power steering column positions for
more clearance when exiting the vehicle, repeat these steps using
the Exit buon instead of buon 1 or 2.
RECALL POSITIONS
Press and hold buon 1, 2 or Exit until the seat, mirrors
and power steering column reach the previously set position.
e memory/exit positions can be programmed to be recalled
automatically when the ignition is turned On/O (for exit recall,
thedriver's door must be opened).
To set the automatic recall options, go to Seings > Vehicle >
Seating Position > Set Entry Memory and Set Exit Memory.
See Seats and Restraints in your Owner’s Manual.
MEMORY SEATS
AUTO HEATED SEATS/STEERING WHEEL♦
AND VENTILATED SEATS♦
When the vehicle is on, the automatic heated seats and automatic
heated steering wheel or automatic ventilated seats will be activat-
ed at the level required by the vehicle’s interior temperature. Turn
o the heated or ventilated seats using the seat controls. Turn o
the heated steering wheel using the steering wheel control.
To turn the auto heated seats/steering wheel or auto ventilated
seats feature on or o, go to Seings > Vehicle > Climate and Air
Quality > Auto Heated Seats and Auto Cooled Seats.
See Instruments and Controls in your Owner’s Manual.
Seat adjustment controls, a 4-way control pad with a Feature Select
toggle control, and a massage buon are located on the driver’s
door, front passenger’s door and the rear seat armrest. Adjustment
features are displayed on the front and rear infotainment screens.
FEATURE AND MASSAGE SELECTION
With the ignition On, toggle
the Feature Select control to
display seat adjustment fea-
tures and massage options.
Use the 4-way control pad to
make adjustments up, down,
forward, or rearward to the
selected feature or to select
the massage type and intensity.
Press the massage buon to recall the last massage type and
intensity.
See Seats and Restraints in your Owner’s Manual.
POWER SEATS (PLATINUM MODEL)
♦
♦Optional equipment

10
CADILLAC USER EXPERIENCE CONTROLS
Refer to your Owner's Manual for important information about using the infotainment system while driving.
Your CT6 oers a variety of entertainment, communication and vehicle system options. Touch an application icon on the touch screen or use
the rotary infotainment controller and buons to access an item. You can use simple gestures on the touch screen, such as tap, drag, pinch and
spread, to interact with the infotainment system. Link a compatible smartphone, USB ash drive or portable audio player/iPod®to the info-
tainment system using a Bluetooth or USB connection. For assistance, call 1-855-428-3669 or visit my.cadillac.com/learn.
Applications Tray:
Shortcuts to
applications
Home
Page
Additional Pages:
Swipe to view additional
pages of applications
(if available)
Applications
♦
:
Touch an icon to
access an application
Press and hold to turn on-o/
Press to mute-unmute/Rotate to
adjust the volume
Press to seek the
previous or next radio
station or track
Return to
previous menu
Controller:
Rotate to highlight
a feature on the
screen/Press to
select a feature
Phone menu
Navigation
menu
Audio
menu
See your Cadillac User Experience Manual.
Power/Mute:
Press and hold to
turn on/o; press to
mute/unmute audio
VOLUME
Touch arrows or
swipe to adjust the
volume