Caliber RDD 772BTi User manual

DVD/VCD/CD/MP3/USB/SD/MMC Player
Bluetooth, with FM/MW Tuner
Operating Instructions
Thank you for purchasing the
RDD 772BTi

1
Safety Precautions
To ensure safe driving, please adjust the
volume to a safe & comfortable level in case
of emergency situations.
Only connect the unit to a 12-volt power
supply with negative grounding.
Never install this unit where the operation &
condition for safety driving is restrained.
Never use the video display function in the
front when driving to prevent the violation of
laws & regulations and also to reduce the
risk of traffic accident except using for rear
view video camera.
Thank you for purchasing this product.
Please read through these operating
instructions so you will know how to operate
your model properly. After you have finished
reading the instructions, keep this manual in
a safe place for future reference.
Never expose this unit, amplifier, and
speakers to moisture or water for preventing
electric sparks or fires.
Please don't change the fuse on the power
cord without professional guidance, using
improper fuse may cause damage to this unit
or even cause fire.
Please power off this unit at once and send it
back to the after-sales service center or the
dealer/distributor you purchased from if one
of the following symptoms is found:
(a). No audio output;
(b). No image output;
(c). Water or other obstacle enters the unit;
(d). Smoking;
(e). Peculiar smell.
To provide a clear demonstration and an
alternative for easy understanding of the
operation of this unit, graphic illustration
was used. However, this illustration is not
necessary printed as the actual image found
on the unit.

2
Safety Information Contents
Caution
This product is a CLASS 1 LASER PRODUCT.
Use of controls or adjustments or performance
of procedures other than those specified
herein may result in hazardous radiation
exposure. Do not open the covers and do
not repair it by yourself. Refer servicing to
qualified personnel.
Two Laser Products
Wave length: CD: 780nm DVD: 650nm
Laser power: No hazardous radiation is
emitted with safety protection.
To reduce the risk of fire electric shock, and
annoying interference, use only the included
components.
Caution of Disc Using
1. Never insert a 3-inch ( 8cm ) CD contained
in the adapter or an irregularly shaped
CD. The unit may not be able to eject it,
resulting in a malfunction.
2. Disc Cleaning. Use a dry, soft cloth to wipe
the disc from center to edge, only neutral
detergent can be used.
3. When playing a new disc. New disc may
have some rough spots around the inner
and outer edges. If such a disc is used,
remove these rough spots with a pencil or
ball-point pen, etc.
Safety Precautions .........................................1
Safety Information ..........................................2
Features .........................................................3
Panel Controls................................................4
Remote Controls.............................................5
USB/SD/MMC/MP3 Playback.........................6
Basic Operations ............................................7
Rotary Knob Menu.................................... 8-11
Radio Mode ..................................................12
RDS (Radio Data System, optional).............13
Disc Mode............................................... 14-17
Bluetooth Mode ...................................... 18-19
iPod/iPhone Mode ........................................20
Device Connections................................ 21-23
Installation Guide.................................... 23-25
Anti-Theft System.........................................25
Troubleshooting............................................26
Care and Maintenance .................................27
Specications ...............................................28

3
Features
DVD-R/RW Compatibility
It is possible to playback DVD-R/RW discs
recorded with the video format and Video
Recording format.
Video CDs Featuring PBC
Compatibility
It is possible to playback Video CDs featuring
PBC (playback control).
WMA and MP3 Compatibility
It is possible to playback WMA and MP3 files.
About WMA
The unit can playback WMA data.
Windows Media and the Windows logo are
trade marks or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
This unit may not operate correctly depending
on the application used to encode WMA files.
About MP3
Supply of this product only conveys a license
for private, non-commercial use and does not
convey a license nor imply any right to use
this product in any commercial (i.e.revenue-
generating) realtime broadcasting (terrestrial,
satellite, cable and/or any other media),
broad-casting/streaming via internet, intranets
Button Operation Explanations
Some frequent operations
1) Move cursor
Note:
In Setting mode, the VOL knob has the same
function as the / button to select setting
items.
2) Conrm
and/or other networks or in other electronic
content distribution systems, such as pay-
audio or audio-on-dem and applications.
An independent license for such use is
required. For details, please visit http://www.
mp3licensing.com.
Press the button to open the
panel.
Music Card Slot

4
Panel Controls
Power on/off: Press to turn on/off the unit.
1. Panel open
2. - Pla y/Pa use (in DVD, CD and M P3/WMA
modes)
- Band switch: FM1-FM2-FM3-AM1-AM2 (in
Radio mode)
- Dial/Receive call (press briefly, in BT mode)
- Switch the HFP voice between unit and HFP
device (press more than 2 seconds, in BT
mode)
- RDS program type (press and hold more than 2
seconds, in Radio mode)
3. - Preset scan (press briefly, in Radio mode)
- Auto preset (press more than 2 seconds, in
Radio mode)
- Stop (in CD, MP3/WMA, and DVD video mode)
- Terminate call (in BT mode)
4. - Press to navigate up among option items (in
DVD, CD and MP3/WMA modes)
- Play the previous preset radio station (in Radio
mode)
5. 3 inch TFT display
6. Power on/off (press more than 2 seconds)
7. - Short press to select playing mode:
 • RADIO
 • DISC(whendiscinserted)
 • USB(whenUSBinserted)
 • SD(whenSD/MMCinserted)
• AUX (front audio & video input. External
peripheral devices with RCA audio and video
outputs can be connected with the unit.)
 • BT
- Long press to return to main source menu when
in any mode, then use navigate button to select
the desired mode, and press OK button to
confirm.
8. Mute
9. - Confirm operation
- Stop auto seeking (in Radio mode)
- Connect or disconnect HFP/A2DP. (press more
than 2 seconds, in BT mode)
- Answer the incoming call.
- Dial out
10. - Cancel source select menu and return to
previous menu
- When play back pictures/videos, press to show
information.
- Display off (press more than 2 seconds)
Press any button to resume.
11. - Search the previous station automatically (press
briefly, in Radio mode).
- Search the previous station manually, and each
press to seek step by step (press more than 2
seconds, in Radio mode).
- Press to search the previous track or chapter (in
CD, MP3/WMA, and DVD video mode).
- Fast backward by 2, 4, 8, 16 step (press more
than 2 seconds, in CD, MP3/WMA and DVD
video mode).
- Press to navigate left among option items
12. - Press to navigate down among option items (in
DVD, CD and MP3/WMA modes)
- Play the next preset radio station (in Radio
mode)
13. - Rotate the knob to adjust volume level
- Press to select Audio/video Setting, press /
on the main unit or on the remote control to
adjust level.
- Press more than 2 seconds to Setting menu.
14. - Search the next station automatically (press
briefly, in Radio mode).
- Search the next station manually, and each
press to seek step by step (press more than 2
seconds, in Radio mode).
- Search the next track or chapter (in CD, MP3/
WMA, and DVD video mode).
- Fast forward by 2, 4, 8, 16 step (press more
than 2 seconds, in CD, MP3/WMA and DVD
video mode).
- Press to navigate right among option items
15. Remote sensor
16. USB port
17. AV in

5
Remote Controls
Press to turn on/off the unit.
Replacing the lithium battery
When the range of operation of the card
remote control becomes short or no function,
replace the lithium battery with a new one.
Make sure the battery polarity replacement is
correct.
1. Pull out the battery holder while pressing
the stopper.
2. Insert the button-type lithium battery with
the (+) mark facing upward. Insert the battery
holder into the remote control.
1 2
(CR 2025)
Remote Control Operating Range
The remote control can operate within
a distance of 3~5m.
Warning
• Store the battery where children cannot
reach. If a child accidentally swallows the
battery, consult a doctor immediately.
• Do not recharge, short, disassemble or
heat the battery or dispose it in a fire.
• Donotleavethebatterywithothermetallic
materials. Otherwise, the battery may start
to give off heat, crack or catch fire.
• Whenthrowingawayorsavingthebattery,
wrap it in tape and insulate.
1. Zoom (DVD/VCD only)
2. Title (DVD only)
3. Power on/off
4. Setup
5. Menu cursor
6. - Confirm operation
- Dial/Receive call (in BT mode)
7. Random playback
8. Digit buttons
9. - Short press to clear the input number. (in BT
mode)
- Long press to iInput “ ”
10.- Short press to input number “0”
- Long press to input “+”
11. Select Audio/Video Setting, then rotate the
knob to adjust level.
12. Volume
13. Mute
14. - Radio tune
- Track skip/seek
15. - DISP: Display time/clock (Video mode)
- ESC: Return to previous menu
16. Source switch
17. Repeat
18. Repeat A-B
19. - Stop/Return
- Terminate call (in BT mode)
20. Play/Pause
21. - Goto search (DVD/VCD only)
- Input “#” (in BT mode)
22. - DVD menu
- PBC (for VCD 2.0 or up)
23. - OSD: On screen display
- AMS: Search and store stations
automatically
24. - Swtch audio channel.
- Switch DVD audio language
- Show music list.
25. - Select DVD or DivX subtitle language.
- Show photo list
26. - Select a difference angle/version of the
current DVD scene.
- Show video list
27. - Video system PAL/NTSC/AUTO
- Radio band (in Radio mode)

6
USB/SD/MMC/MP3 Playback
1. Load SD/MMC Card
Insert the SD/MMC card into the slot, with
the front side at right.
The unit will play the music automatically
and the LCD will show CARD.
2. Take out SD/MMC Card
Press SRC button and switch to non CARD
mode, slightly press SD/MMC card, take
out the card when it pops out.
3. Load USB Equipment
Open the cap, insert the USB into the
connector and the unit will play the music
in the USB memory automatically, and the
LCD will show USB.
4. Take out USB Equipment
Press SRC button and switch to non USB
mode, then take off the USB stick, close
the cap.
USB/SD/MMC Notes
USB functions (flash memory type) MP3
music play
1. SD/MMC card support
2. USB flash memory 2 in 1 (SD/MMC)
support
3. FAT 12/FAT 16FAT 32 is possible
- FAT 12/16 (dir: 200 support, file: 500
support)
- FAT 32 (dir: 200 support, file: 500 support)
4. File name: 32 byte/dir name: 32 byte /tag
name: 32 byte
5. Tag (id3 tag ver 2.0)
- Title/artist/album: 32 byte support
6. Multi card reader not support
7. USB 1.1 support
USB 2.0 support
(it can not support USB 2.0 speed. Just, get
the same speed with USB 1.1)
Note:
Not all kinds of USB devices are compatible
with the unit.

7
Basic Operations
Turn on/off the Power
1. Press to turn on the unit.
The unit goes back to the last status after
power on.
2. Long press to power off.
Mute
Press the MUTE button to cut the sound.
Note:
• Do ing th e oper a tion a bove a gain or
adjusting volume will release muting.
• Mute icon appears on the TFT during
muting.
Adjust the Volume
Rotate the knob on the panel or press VOL +/-
on the remote control to increase or decrease
the volume.
The adjustable range of volume is 0 to 39.
Playing Source Selection
Method 1
Short press the SRC button on the panel
or remote control to cycle through all the
available sources.
Method 2
In any mode, long press the SRC button on
the panel or remote control to enter main
source menu, then use navigate button to
select the desired mode, and press OK to
confirm.
Note:
• When some devices are not ready, they
cannot be selected.
• Youshouldstopswitchingwhentheplaying
source you desired has been selected and
wait for some seconds, the unit will auto
enter the playing source mode you have
selected.
When Parking Brake Applied
1. If 'PRK SW' cable is connected to hand
brake switch, the video display of the TFT
monitor will be controlled by driving status,
system setup and input video sources.
2. When the car is moving ahead, if the
video disc is played, the screen appears
“Warning!!! It is illegal to view video! while
driving or operating a motor vehicle. Set
parking brake to view video.”. The above
warning screen will prevent the driver
watching images. The passengers at the
rear seats can watch normally.
When Reverse Driving
If the rear view video camera is connected,
the unit automatically switches to CAMERA
source during reverse driving. The unit returns
to the original work mode after the reverse
driving is done.

8
Rotary Knob Menu
1. Rotate the knob to adjust volume level.
2. Short press to access the Audio&VIDEO
Setting menu.
Each press the knob to change the AUDIO
mode: EQ/Bass/Middle/Treble/Balance/Fader,
and press / on the main unit or on the
remote control to adjust level.
Each press the knob to change the VIDEO
mode: Bright/Contrast/Saturation, and press
/ on the main unit or on the remote control to
adjust level.
EQ: USER/FLAT/POP/ROCK/CLASSIC/
JAZZ
The Equalizer function applies preset sound
effects to the unit’s audio output signal. Turn
the rotary encoder to select from the following
equalizer options: USER, FLAT, POPULAR,
ROCK, CLASSIC, JAZZ. With the equalizer
function activated, if bass or treble is adjusted,
the EQ Mode will revert to “USER”. When
the equalizer function is activated, the most
recently selected bass/treble levels cannot be
adjusted. When the equalizer function is not
active, the unit will return to the most recently
selected bass and treble levels.
3. Press the knob more than 2 seconds to
enter Setting mode, then Use / / /
and OK key to select setting items.
General Setting
Beep: On/ Off
The beep tone feature allows the selection of
an audible beep tone to be heard each time
the menu is accessed.
Time Mode
24 Hour Mode: the clock displays in the type
of 24 hours such as 20:18.
12 Hour Mode: the clock displays in the type
of 12 hours such as 11:18 AM.
Time Adjust
Press or /key to set hour and minute.
Each time you press to select one
segment of the clock display:
Hour-Minute
As you select segments of the clock display
the segment selected will be highlighted. Then
you can rotate the knob or press / to put a
clock right.
DivX®Deactivation
Display the DivX®activation information.
In order to play DivX®VOD (video on demand)
contents on this unit, the unit must first
be registered with a DivX®VOD contents
provider.
DivX®Registration
To show the DivX®registration code and web
site.

9
Parental control
1 When “Enter password” appears on the
display, input a 4-digit password by remote
control (Original password: 8888), press
OK or ENTER button to confirm and
“Correct Password” appears.
2 Press OK or ENTER, then rotate the knob
or press / key to select a rating level.
The rating is from 1 to 8:
(1) with the most limits when playing.
(8) with the least limits when playing.
3 Press the OK or ENTER button to conrm.
Set Password
1 When “Enter password” appears on the
display, input the old password by remote
control, press OK or ENTER button to
conrm and “Correct Password” appears.
2 Press the OK or ENTER, enter a new 4-digit
password by the remote control, press the
OK or ENTER button to conrm.
3 Then input the new password again for
double confirm, press the OK or ENTER
button and “Set Password Successful”
appears.
• Original password: 8888
• If you forget your password, enter original
password to unlock.
Default Settings
Load the default settings.
When the selection menu appears, press
key to select Yes or No, press OK or ENTER
button to conrm.
Aspect Ratio:
4:3: For 4:3 TV picture.
16:9: For 16:9 wide screen TV.
Note:
There is no 16:9 specification for VCD; for
VCD the video output only in 4:3 format; in our
setting menu, 4:3 or 16:9 setting is for video
monitor setting, but not mean that DVD will
output video signal in 4:3 or 16:9 format; which
means current our TFT is in 16:9, when we
play vcd, if we want to keep the video signal
without distortion, the video should not be set
to full screen like 16:9.
Mirror: On/Off
This option allows for selection of a mirror
image view when a rear view backup camera
(sold separately) is connected to the CAMERA
IN input on the back of the radio. Rotate the
knob or press / key to select “On” or “Off”.
Back Camera
Select back camera Battery, Ground or Off.
Battery: When the polarity of the connected
lead is positive while the gear shift is in
REVERSE (R) position
Ground: When the polarity of the connected
lead is negative while the gear shift is in
REVERSE (R) position
Off: The back camera is disabled.
AUX
Select auxiliary device on or off.
Text Scroll
Select Text Scroll on or off.
Parking: On/Off
When it is in Parking “On” mode, if you play
the video disc, the screen will show “Warning!!!
It is illegal to view video! while driving or
operating a motor vehicle. Set parking brake
to view video.”.
SWC: Power/Mute/Source/Vol+/Vol-/Seek
Rotate the knob or press / key to select
steering wheel control function.
Color Select
Select the key backlight color Color1,2,3...12
or User.
Color Scan
Select Color Scan on or off.
Rotary Knob Menu