California Outdoor Concepts 8100- Round Capri User manual

8.9.11
WARNING If the information in this manual is not
followed exactly, a fire or explosion may result
causing property damage, personal injury or loss of
life.
WARNING – Gas Cylinders must be stored
outdoors in a well-ventilated area out of the
reach of children. Disconnected cylinders must
have threaded valve plugs tightly installed and
must not be stored in a building, garage, or any
other enclosed area.
WARNING Improper installation, adjustment, alteration,
service or maintenance can cause injury or property
damage. Read the installation, operating, and maintenance
instructions thoroughly before installing or servicing this
equipment.
WARNING
Do not store or use gasoline or other flammable
vapors or liquids in the vicinity of this or any other
appliance. A liquid propane cylinder not connected for
use shall not be stored in the vicinity of this or any
other appliance.
DANGER
If you smell gas:
1. Shut off gas to the appliance
2. Extinguish any open flame.
3. If odor continues, keep away from the
appliance and immediately call your gas
supplier or the fire department.
WARNING
Do not burn wood or any other solid fuel materials
in this fire bowl.
For use with a 16.4oz liquid propane cylinder
(not included)
Report Number 516-O-01-4
ANSI Z21.97-2012/CSA 2.41-2012
Outdoor Decorative Gas Appliances
WARNING - For Outdoor Use Only
WARNING
Installation and service must be performed by a
qualified installer, service agency or gas supplier.
CARBON MONOXIDE HAZARD
This appliance can produce carbon
monoxide which has no odor.
Using it in an enclosed space can
kill you.
Neverb use this appliance in an
enclosed space such as a camper,
tent, car or home.
DANGER
California Outdoor Concepts, Inc.
17671 Irvine Blvd., Suite 108
Tustin, CA 92780
Telephone [phone]
Fax [phone]
ASSEMBLY INSTRUCTIONS
Table-Top Gas Fireplace
FOR OUTDOOR USE ONLY
Model No. 8100- Round Capri 8200-Square Capri

2
TABLE OF CONTENTS
IMPORTANT SAFETY INFORMATION.......................................................... 3
SAFETY INFORMATION ABOUT PROPANE (LP) GAS............................... 3
SPECIFICATIONS .......................................................................................... 5
PARTS IDENTIFICATION LIST...................................................................... 5
ASSEMBLY..................................................................................................... 6
LIGHTING INSTRUCTIONS ........................................................................... 7
REPLACING FUEL CYLINDERS & MAINTENANCE .................................... 8
CONSUMER: RETAIN THIS MANUAL FOR FUTURE REFERENCE
INSTALLER: LEAVE THIS MANUAL WITH CONSUMER

3
IMPORTANT SAFETY INFORMATION
The appliance area must be kept clear and free from combustible materials, gasoline and other flammable
vapors and liquids. Do not use this appliance if any part has been under water. Immediately call a qualified
service technician to inspect the appliance and to replace any part of the control system and any gas control
that has been under water.
Children and adults should be alerted to the hazards of high surface temperatures and keep a safe
distance to avoid burns or clothing ignition.
Young children should be carefully supervised when they are in the area of the appliance.
Clothing or other flammable material should not be hung from the appliance, or placed on or near
the appliance.
Any guard or other protective device removed for servicing the appliance shall be replaced prior to
operating the appliance.
Installation and repair should be done by a qualified service person. The appliance should be
inspected before use and at least annually by a qualified service person. More frequent cleaning
may be required as necessary. It is imperative that the control compartment, burners, and
circulating-air passageways of the appliance are kept clean. The installation must conform with
local codes or, in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1.
The appliance should be inspected before use and at least annually by a qualified service person. More
frequent cleaning may be required as necessary. It is imperative that control compartment, burners, and
circulating air passageways of the appliance be kept clean.
!
The burner should be inspected annually. If there is evidence that the burner is damaged, the burner must
be replaced by an OEM burner from the manufacturer.
Burner Inspection:
a. Remove the media and examine the burner for damage. (Fig. 1)
b. If the burner is damaged contact your dealer to buy a
replacement burner.
Figure 1
Burner Flame Inspection:
a. Periodically check the burner flame. (Fig. 2)
Periodically observe your firepit for burn pattern
and flame presentation.
!
Do not use this appliance if any part has been under water.
Immediately call a qualified service technician to inspect the
appliance and to replace any part of the control system and
any gas control that has been under water. Figure 2
Do NOT burn solid fuels in this gas fireplace.
CAUTION: This outdoor gas appliance is not intended to be installed in or on recreational vehicles and/or
boats.

4
SAFETY INFORMATION ABOUT PROPANE (LP) GAS
A self contained Propane gas cylinder for use with this appliance must have a capacity of 16.4 oz (465g) and
must be arranged to provide for proper fuel withdrawal from the operating cylinder
The LP-gas supply cylinder must be constructed and marked in accordance with the U.S. D.O.T.
Specifications for LP-Gas Cylinders or the Standard for Cylinders, Spheres and Tubes for Transportation of
Dangerous Goods and Commission, CAN/CSA-B339, as applicable.
!Only cylinders marked with “PROPANE FUEL” are approved for this appliance.
!The cylinder supply system must be arranged for vapor withdrawal.
!The cylinder used must include a collar to protect the cylinder valve.
!This appliance shall be used only outdoors in a well-ventilated space and shall not be used in a building,
garage, or any other enclosed space.
!The cylinder must be disconnected when the appliance is not in use.
!The cylinder must be disconnected when the appliance is in storage.
!Cylinders must be stored outdoors in a well-ventilated area out of the reach of children.
!Disconnected cylinders must have threaded valve plugs tightly installed and must not be stored in a
building, garage, or any other enclosed area.

5
SPECIFICATIONS
INPUT
10,000 Btu/hr High Fire
6,000 Btu/hr Low fire
Propane Regulator Pressure
11 inches water column
Clearances to combustible surfaces
Sides: 5 in. Top: 48 in.
REPLACEMENT PART IDENTIFICATION LIST
Replacement parts are available from your dealer.
PART
DESCRIPTON
PART#
QTY
CONTROL KNOB
AM0821
1
Firepit
AM0990
1
Lava Rock
AM0851
1
Aluminum washers
AM0972
2
“Butterfly” nut
AM0982
1

6
ASSEMBLY
1. Make sure the valve knob is turned all the way clockwise to the CLOSE position as shown in
Figure 1.
Figure 1
2. Place the aluminum washer (AM0972) on the umbrella hole on the table top as shown in below
Figure 2, and then place the firepit base on the center of the umbrella base hole, and have the gas
tube of the regulator go through the aluminum washer and umbrella hole.
Figure 2 Figure 3
3. Place another aluminum washer (AM0972) at the gas tube of the regulator as shown in Figure 3.
4. Screw the ‘Butterfly’ nut (AM0982) into the gas tube of the regulator, and tighten it as shown in
Figure 4.
Figure 4
Figure 5
5. Screw the Propane Cylinder clockwise into the gas tube as shown in Figure 5. Hand tighten only.
Do not cross thread. Use only a 16.4 oz (465g) cylinder with a NO.800 connection.
Do not use a 14.1 oz (400g) cylinder. To check for leaks: Use a solution of water and dish
soap and brush around the connection between the gas tank and valve component. If you see any

7
bubbles you do not have a good seal and the gas bottle should be removed and reinstalled. There
should be no bubbles if the connection is gas tight.
6. Pour the lava rocks into the fire bowl. Spread the lava rocks evenly in the bowl as shown in
Figure 6.
Figure 6
LIGHTING INSTRUCTIONS
1. Hold a lighted match to the surface of the lava rocks as shown in Figure 7.
Figure 7
2. Press the control knob in slightly and turn it counter-clockwise to the HIGH position. After the
burner is lit, the flame height can be adjusted from HIGH to LOW.
HIGH
3. To turn the burner off, push the control knob in slightly and turn it clockwise to the CLOSE
position.

8
REPLACING FUEL CYLINDERS
1. Screw the Propane Cylinder clockwise into the gas tube. Hand tighten only. Do not cross
thread. Use only a 16.4 oz (465g) cylinder with a No.800 connection.
Do not use a 14.1 oz (400g) cylinder.
MAINTENANCE
The flames should be about 6” to 8” tall and yellow in color. If any different your unit may need
cleaning.
To Clean:
Carefully remove any debris from the lava rock. Never use a vacuum cleaner. Do not obstruct the
flow of combustion and ventilation air.There should nothing but the lava rock around the burner
area. Do NOT remove the burner, this is not a user serviceable part.
It is recommended that the firepit be stored indoors during the winter if it will be subjected to
freezing temperatures. The cylinder must be disconnected and removed from the appliance before
the appliance can be stored indoors, in a clean dry location. The cylinder must be stored outdoors
in a well-ventilated area out of the reach of children. Disconnected cylinders must have threaded
valve plugs tightly installed and must not be stored in a building, garage or any other enclosed
area.
When the appliance is equipped with a Type III Connection, the cylinder should be disconnected
when not in use.