Caltta ZXIMCU P300 User manual

ZXIMCU P300 Portable
Emergency Command System
Operation Manual

ZXIMCU P300 Portable Emergency Command System Operation Manual
All rights reserved
© 2021 Copyright Caltta Technologies Co.,Ltd.
Page I
Version update instruction
Version
Date
Author
Auditor
Remark
1.0
2021-01-19
Caltta Technologies Co.,Ltd.
Address
12F, Building G2, International E-City, Nanshan, Shenzhen,
Zip code
518052
Website
http://www.caltta.com
Email
[e-mail]
Telephone
[phone]
©2021 Copyright Caltta Technologies Co.,Ltd. All rights reserved
Copyright statement:
The copyright of this document belongs to Caltta Technologies Co.,Ltd. Text contains proprietary information owned by
Caltta Technologies Co.,Ltd., without the written permission of Caltta Technologies Co.,Ltd., any unit or individual shall not
use or leak any document and Figures, this document contains tables, Figure, data and other information.
The information in this document contains the development progress of Caltta Technologies Co.,Ltd. products and
technology will continue to update, Caltta Technologies Co.,Ltd. would not notice such information updates.
Privacy Policy:
Caltta Technologies Co.,Ltd. is a global leader in trunking communications and information technology, the company has
committed to complying with appropriate regulations to personal data security. In order to protect it, a lot of essential security
technical measures should be taken such as anonymous, data encryption.

ZXIMCU P300 Portable Emergency Command System Operation Manual
Page II
© 2021 Copyright Caltta Technologies Co.,Ltd.
All rights reserved
INDEX
1 OVERVIEW.................................................................................................................................................1
2 ZXIMCU P300 PRODUCT SPECIFICATION.......................................................................................2
3 NETWORK ARCHITECTURE INTRODUCTION................................................................................ 3
4 DISPATCHING PC CONFIGURATION.................................................................................................4
4.1 IP ADDRESS SETTING................................................................................................................4
4.2 IE 11 BROWSER SETTING.........................................................................................................4
5 TRUNKING SERVICES OPERATIONS................................................................................................6
5.1 OPERATIONS OF DAS UNIFIED DISPATCH CONSOLE.................................................... 6
5.1.1 DISPATCH CONSOLE INSTALLATION..................................................................... 6
5.1.2 DISPATCH CONSOLE LOGIN..................................................................................... 6
5.1.3 DISPATCH CONSOLE INTERFACE INTRODUCTION........................................... 8
5.1.4 DISPATCH CONSOLE INITIATES A HALF-DUPLEX VOICE PRIVATE CALL 14
5.1.5 DISPATCH CONSOLE INITIATES A FULL-DUPLEX VOICE PRIVATE CALL.15
5.1.6 DISPATCH CONSOLE INITIATES A FULL-DUPLEX VIDEO PRIVATE CALL.15
5.1.7 DISPATCH CONSOLE INITIATES A VOICE GROUP CALL................................16
5.1.8 DISPATCH CONSOLE INITIATES A VIDEO GROUP CALL................................16
5.1.9 SENDING SMS AND MMS..........................................................................................17
5.1.10 FORCED RELEASE AND FORCED INSERTION BY THE DISPATCHER..... 17
5.1.11 DYNAMIC REGROUP................................................................................................18
5.1.12 TEMPORARY GROUP CALL................................................................................... 19
5.1.13 EMERGENCY CALL...................................................................................................20
5.1.14 DISPATCH CONSOLE LOCATION.........................................................................20
5.1.15 FRAME SELECT AND DISPATCH ON THE MAP................................................22
5.1.16 DISPATCH CONSOLE INITIATES VIDEO PULL................................................. 23
5.1.17 DISPATCH CONSOLE INITIATES VIDEO DISTRIBUTION............................... 25
5.2 OPERATIONS OF MULTIMEDIA DISPATCH SYSTEM......................................................26
5.2.1 DISPATCHER LOGIN...................................................................................................27
5.2.2 VIDEO PULL.................................................................................................................. 27
5.2.3 VIDEO DISTRIBUTION................................................................................................ 29

ZXIMCU P300 Portable Emergency Command System Operation Manual
All rights reserved
© 2021 Copyright Caltta Technologies Co.,Ltd.
Page III
5.2.4 LOCATION......................................................................................................................32
6 CARD ALLOCATION AND NUMBER ALLOCATION.................................................................... 34
6.1 HAND-HELD TERMINAL NUMBER ALLOCATION.............................................................. 34
6.1.1 LOGIN TO THE UNIFIED OMM................................................................................. 34
6.1.2 USER AUTHENTICATION INFORMATION CONFIGURATION.......................... 35
6.1.3 USER NUMBER ALLOCATION..................................................................................36
6.1.4 ADD GROUP..................................................................................................................39
6.1.5 ADD GROUP MEMBER...............................................................................................40
6.2 CPE TERMINAL NUMBER ALLOCATION............................................................................. 42
6.2.1 LOGIN TO THE UNIFIED OMM................................................................................. 42
6.2.2 USER AUTHENTICATION INFORMATION CONFIGURATION.......................... 42
6.2.3 USER NUMBER ALLOCATION..................................................................................43
6.2.4 LOGIN TO THE LTE CORE NETWORK MANAGEMENT PAGE........................ 43
6.2.5 APN CONFIGURATION...............................................................................................44
6.2.6 SYNCHRONIZE DATA.................................................................................................46
6.2.7 SHOW CPE ACCESS STATUS................................................................................. 46
6.3 DISPATCHER MANAGEMENT................................................................................................ 47
7 REFERENCES........................................................................................................................................ 49
7.1 MANUALLY ADD TRUSTED SITES TO THE IE BROWSER............................................. 49
7.2 APPENDIX A.1.1..........................................................................................................................54
7.2.1 APPENDIX A.1.1.1........................................................................................................54

ZXIMCU P300 Portable Emergency Command System Operation Manual
Page
IV
© 2021 Copyright Caltta Technologies Co.,Ltd.
All rights reserved
Figure Index
Figure 1-1 ZXIMCU P300 with battery .................................................................................................. 1
Figure 1-2 ZXIMCU P300 without battery...............................................................................................2
Figure 2- 1 ZXIMCU P300 Operation Panel Diagram...........................................................................2
Figure 3- 1 System Network Architecture............................................................................................... 3
Figure 4- 1 Adding Route...........................................................................................................................4
Figure 4- 2 Download plug-in and script on the OMM interface ..................................................... 5
Figure 4- 3 Trusted site script setting of IE browser............................................................................. 5
Figure 5- 1 Downloading client and plug-ins of the dispatch console................................................6
Figure 5- 2 Selecting dispatch console local IP address......................................................................7
Figure 5- 3 Login interface of the dispatch console.............................................................................. 7
Figure 5- 4 Dispatch console interface....................................................................................................9
Figure 5- 5 Dispatch console interface layout........................................................................................ 9
Figure 5- 6 Add user to dispatching operation area............................................................................10
Figure 5- 7 Remove user from dispatching operation area............................................................... 11
Figure 5- 8 Sound channel selection..................................................................................................... 11
Figure 5- 9 User call attribute setting.....................................................................................................12
Figure 5- 10 Group call attribute setting................................................................................................12
Figure 5- 11 Dispatcher call attribute setting........................................................................................12
Figure 5- 12 GIS interface of the dispatch console.............................................................................13
Figure 5- 13 Video dispatch interface....................................................................................................14
Figure 5- 14 Dispatch console initiates a half-duplex voice private call..........................................14
Figure 5- 15 Dispatch console initiates a full-duplex voice private call........................................... 15
Figure 5- 16 Dispatch console initiates a full-duplex video private call........................................... 15
Figure 5- 17 Dispatch console initiates a voice group call.................................................................16
Figure 5- 18 Dispatch console initiates a video group call................................................................ 17
Figure 5- 19 Sending SMS and MMS....................................................................................................17
Figure 5- 20 Forced release by the dispatcher....................................................................................18
Figure 5- 21 Forced insertion by dispatcher.........................................................................................18
Figure 5- 22 Dynamic regroup................................................................................................................ 19
Figure 5- 23 Temporary group call.........................................................................................................20
Figure 5- 24 Emergency call................................................................................................................... 20
Figure 5- 25 Dispatch console location operation............................................................................... 21

ZXIMCU P300 Portable Emergency Command System Operation Manual
All rights reserved
© 2021 Copyright Caltta Technologies Co.,Ltd.
Page V
Figure 5- 26 Map interface display and operation...............................................................................22
Figure 5- 27 Frame select on the map.................................................................................................. 22
Figure 5- 28 Frame select and dispatch on the map.......................................................................... 23
Figure 5- 29 Dispatch console initiates a video pull............................................................................24
Figure 5- 30 Toolbar of the video display window...............................................................................25
Figure 5- 31 Dispatch console Initiates video distribution..................................................................26
Figure 5- 32 Client Installation of the Multimedia Dispatch System.................................................26
Figure 5- 33 MDS client logging............................................................................................................. 27
Figure 5- 34 Operations of the multimedia dispatch video pull.........................................................28
Figure 5- 35 Multimedia dispatch video display window.................................................................... 29
Figure 5- 36 Multimedia dispatch video distribution............................................................................30
Figure 5- 37 Video distribution is successful........................................................................................30
Figure 5- 38 Video is distributed to the receiving terminal.................................................................31
Figure 5- 39 Ending video distribution...................................................................................................31
Figure 5- 40 MDS terminal location operation..................................................................................... 32
Figure 5- 41 MDS location display......................................................................................................... 33
Figure 5- 42 Viewing historical track of the terminal...........................................................................33
Figure 5- 43 Dispatching the terminal on the Map interface............................................................. 34
Figure 6- 1 Unified OMM interface.........................................................................................................35
Figure 6- 2 Add card.................................................................................................................................35
Figure 6- 3 Input Add card information..................................................................................................36
Figure 6- 4 Add user.................................................................................................................................37
Figure 6- 5 Input user information-1...................................................................................................... 38
Figure 6- 6 Input user information-2...................................................................................................... 38
Figure 6- 7 Add group.............................................................................................................................. 39
Figure 6- 8 Group account information setting.................................................................................... 40
Figure 6- 9 Add group member-1...........................................................................................................40
Figure 6- 10 Add group member-2.........................................................................................................41
Figure 6- 11 Add group member-3.........................................................................................................41
Figure 6- 12 Modify the group member attribute................................................................................. 42
Figure 6- 13 Input user information........................................................................................................43
Figure 6- 14 Enter to expert diagnosis mode on the unified OMM interface..................................44
Figure 6- 15 Add CPE IP Pool and IP Segment..................................................................................45
Figure 6- 16 Create CPE Authorization Profile....................................................................................46
Figure 6- 17 Show CPE access status..................................................................................................47
Figure 6- 18 Add dispatcher account.....................................................................................................47

ZXIMCU P300 Portable Emergency Command System Operation Manual
Page
VI
© 2021 Copyright Caltta Technologies Co.,Ltd.
All rights reserved
Figure 6- 19 Setting dispatcher account information.......................................................................... 48
Figure 7- 1 Trusted sits setting of the Internet Options...................................................................... 49
Figure 7- 2 Security settings of trusted sites-1.................................................................................... 50
Figure 7- 3 Security settings of trusted sites-2.................................................................................... 51
Figure 7- 4 Security settings of trusted sites-3.................................................................................... 51
Figure 7- 5 Temporary Internet Files Settings..................................................................................... 52
Figure 7- 6 Uncheck "Turn on Pop-up Blocker" .................................................................................53
Figure 7- 7 Advanced Setting of Internet Option................................................................................. 54

ZXIMCU P300 Portable Emergency Command System Operation Manual
All rights reserved
© 2021 Copyright Caltta Technologies Co.,Ltd.
Page 1
1Overview
ZXIMCU P300 Manpack Emergency Command System highly integrates base-band
unit, radio unit, core network and multimedia dispatch, quickly implements the on-site
deployment of LTE emergency network, provides rich LTE-based services such as
professional trunking call, multimedia dispatch, real-time video transmission, GIS
location, audio/video full duplex call, etc., which is widely adopted in emergency
response scenarios such as forest fire protection, fire emergency, earthquake rescue,
production safety, government affairs network blind spots coverage. The system
supports various backhaul modes such as satellite, Mesh, optical fiber, microwave
and carrier network etc.
P300 is designed into two versions, with battery version and without battery version
as shown in the following two figures. The P300 with battery version can work
continuously to at least 4 hours without external power supply. The without battery
version should connect to external power supply with dedicated power adapter.
Figure 1-1 ZXIMCU P300 with battery

ZXIMCU P300 Portable Emergency Command System Operation Manual
Page 2
© 2021 Copyright Caltta Technologies Co.,Ltd.
All rights reserved
Figure 1-2 ZXIMCU P300 without battery
2ZXIMCU P300 Product Specification
Figure 2- 1 ZXIMCU P300 Operation Panel Diagram
1
Core Network
Switch
Mainly used for acting as a blind
spot coverage station when
P300 is used as a stand-alone
station
7
Service
Network
Interfaces
Network
interfaces
used by service
2
Power Input
Interface
Used for connecting with
external power supply
8
Antenna
Interface
Antenna
Interface
3
12 V Power
Output
Interface
Provide 12V power supply
output
9
GPS
Interface
Connect with
GPS antenna
4
Power Switch
Control both base station and
core network
10
Device
Indicator
Device status
indicator

ZXIMCU P300 Portable Emergency Command System Operation Manual
All rights reserved
© 2021 Copyright Caltta Technologies Co.,Ltd.
Page 3
5
Wi-Fi Interface
Connect with WiFi antenna
11
Display
Screen
Used to check
and adjust device
statue
6
DEBUG
Interface
Used for base station debugging
12
Operation
Knob
Used to control
display screen
3Network Architecture Introduction
Caltta LTE portable emergency command system is based on All-IP flat network
architecture. The system follows B-TrunC Broadband Trunking standard, integrates
LTE core network iEPC, professional voice and video trunking network DSS,
multimedia dispatching server MDS, base station system and terminals, and provides
end-to-end multimedia command and dispatch solution. While providing kinds of
multimedia service such as voice, video and data, the system can also support data
bearer and transmission for the third-party, keeping the system in openness.
LTE Portable Emergency Command System network topology is shown as follows:
Figure 3- 1 System Network Architecture
Remark: The network architecture diagram of the system is a schematic diagram of each
network unit. The physical form of the device is determined by different products.
LTE core network iEPC is a common LTE core network device complying to 3GPP
standard specification, consists of MME, S/P-GW, and HSS, which is used for
providing common LTE services.
Trunking core network system DSS is composed of PDS and DAS. PDS provides
trunking services for trunking users. DAS provides dispatching services and industry
customized services.

ZXIMCU P300 Portable Emergency Command System Operation Manual
Page 4
© 2021 Copyright Caltta Technologies Co.,Ltd.
All rights reserved
Multimedia dispatching server MDS has various functions such as mobile video
surveillance, Video pull, video distribution, video dubbing, etc.
4Dispatching PC Configuration
Both common PC or laptop can be used as dispatching PC. The PC operating
system requires Win 7 or above.
4.1 IP Address Setting
The IP address of PC needs to interconnect with the IP address of MDS server
(defaults to 192.168.13.20) and the IP address of trunking dispatch console (defaults
to 192.168.13.21). Interconnecting to OMM IP address is also required while login
the OMM system.
The following two IP addresses can be configured individually in the LAN to
communicate with MDS dispatch console, trunking dispatch console and OMM
system , to login the dispatch console (in the LAN, the IP address of the dispatch
console needs to be set in the same network segment with the trunking dispatch
console and MDS dispatch console, and there is no IP address conflict):
192.168.13.160/24
192.168.90.160/24
Open the PC command terminal and add a static route for the direct access to the
individual device, CPE and camera:
route add 45.45.0.0 mask 255.255.0.0 192.168.13.80 –p
Figure 4- 1 Adding Route
4.2 IE 11 Browser Setting
Login to the OMM system via browser. Support both IE and Chrome browser. If using
IE browser, version 11 is required.

ZXIMCU P300 Portable Emergency Command System Operation Manual
All rights reserved
© 2021 Copyright Caltta Technologies Co.,Ltd.
Page 5
Before logging in, make sure the PC has been installed with Adobe flash player and
the IE settings are correct, otherwise the OMM interface may not open. The Adobe
flash player plug-in and IE setting script can be downloaded and installed on the
OMM interface.
Figure 4- 2 Download plug-in and script on the OMM interface
Script setting of IE trusted site:
Extract the following compressed package (or the batch file downloaded from the
OMM), open Internet Explore11 to set up the script:
IE11SettingsZh.7
z
Input the OMM server address in the CMD window, which defaults to
192.168.90.129.
Figure 4- 3 Trusted site script setting of IE browser

ZXIMCU P300 Portable Emergency Command System Operation Manual
Page 6
© 2021 Copyright Caltta Technologies Co.,Ltd.
All rights reserved
Press Enter button after inputting the IP address, the script will set up automatically.
Click any key to exit when finishing set up.
5Trunking Services Operations
5.1 Operations of DAS Unified Dispatch Console
5.1.1 Dispatch Console Installation
Install the dispatch console software on the PC in advance and login the DAS
dispatch console via the CS client.
Input the defaulted IP address 192.168.13.21 in the IE browser, then it will enter into
the interface of plug-in and client downloading.
After downloading the client and plug-in., install the plug-in first, then install the client
later according to the defaulted settings. Restart the PC after the installation.
Figure 5- 1 Downloading client and plug-ins of the dispatch console
5.1.2 Dispatch Console Login
Double click the DAS dispatch console icon and open the software. The DAS
software will pop up the IP selection interface if the fixed IP address changes or for

ZXIMCU P300 Portable Emergency Command System Operation Manual
All rights reserved
© 2021 Copyright Caltta Technologies Co.,Ltd.
Page 7
first time login. Select 192.168.13.160 as the dispatch console local IP address. Click
OK to enter the login interface.
Figure 5- 2 Selecting dispatch console local IP address
Figure 5- 3 Login interface of the dispatch console

ZXIMCU P300 Portable Emergency Command System Operation Manual
Page 8
© 2021 Copyright Caltta Technologies Co.,Ltd.
All rights reserved
Input the account number and password on the login interface of dispatch console ,
select Remember Password and click the setting icon on the right side, Input the
server IP address (IP address of the trunking dispatch console) and MDS IP address,
then click Login to login in the dispatch console. The defaulted parameters of the
dispatch console are as follows:
Account number: dis01, Password: 666666
Server IP address (IP address of the trunking dispatch console) : 192.168.13.21
MDS IP address: 192.168.13.20
Tip 1: Modifying the Local IP Address of the Dispatch Console
Enter to the login interface of the dispatch console after the local IP address is
configured. Will fail to access to the server if selecting the wrong IP address.
There are two methods to modify the local IP address:
1. Method 1: Delete the local fixed IP address and add another IP address, then
re-select the IP address.
2. Method 2: Modify the configuration file in the DAS software installation directory.
Change the local IP address by modifying the localIP=192.168.13.160 in the
"config.ini" file.
5.1.3 Dispatch Console Interface Introduction
The dispatch console interface is shown as follows after login:

ZXIMCU P300 Portable Emergency Command System Operation Manual
All rights reserved
© 2021 Copyright Caltta Technologies Co.,Ltd.
Page 9
Figure 5- 4 Dispatch console interface
5.1.3.1 Dispatch Console Interface Layout
Figure 5- 5 Dispatch console interface layout
The dispatch console interface is divided into four areas as shown above,
introduction of each (marked with number) is as follows:
Area 1: Menu area, with five icons of Dispatch, GIS, Video, History and Setting,
corresponds to different interfaces.

ZXIMCU P300 Portable Emergency Command System Operation Manual
Page 10
© 2021 Copyright Caltta Technologies Co.,Ltd.
All rights reserved
Area 2: User list area, which shows the authorized users of the system and user
online status. The hand-held terminal means default fleet user, individual device
means camera user. Click the icon on the upper right corner of user list to
display or hide the user list.
Area 3: Toolbar and shortcut tools of trunking functions, such as temporary
group, dynamic regroup, emergency alarm, etc..
Area 4: Function display area which displays different functions of dispatch, map,
video and so on according to menu selections.
5.1.3.2 General Operations of Trunking Dispatch
Select Dispatch on the menu and enter the dispatching interface.
Adding users to the dispatching operation area:
Select the user / group / dispatch console that needs to be dispatched on the user
information list, double click to add the user / group / dispatch console to the
dispatching operation area. Or right click and select Voice Dispatch to add the user /
group / dispatch console to the dispatching operation area.
Figure 5- 6 Add user to dispatching operation area
Remove users from dispatching operation area:
Move cursor to the user to be removed, right click and select Remove dispatch.

ZXIMCU P300 Portable Emergency Command System Operation Manual
All rights reserved
© 2021 Copyright Caltta Technologies Co.,Ltd.
Page 11
Figure 5- 7 Remove user from dispatching operation area
Sound channel selection:
When the dispatch console dispatches users, groups or dispatchers, it supports
switching between balance channel model and exclusive main channel model.
Right click the user/group/dispatcher and select Sound channel from the shortcut
menu. The corresponding channel can be selected as required. By default, balance
channel is selected.
Figure 5- 8 Sound channel selection
User call attribute setting:
Move cursor to a user, right click and select Call attribute from the shortcut menu.
Select the corresponding call attribute as required. If select Full duplex, the dispatch
console will make a full duplex call with the user. Otherwise, it is a half-duplex call.

ZXIMCU P300 Portable Emergency Command System Operation Manual
Page 12
© 2021 Copyright Caltta Technologies Co.,Ltd.
All rights reserved
Figure 5- 9 User call attribute setting
Group call attribute setting:
Move cursor to a group, right click and select Call attribute from the shortcut menu
to select a call attribute as required.
Figure 5- 10 Group call attribute setting
Dispatcher call attribute setting:
Move cursor to the dispatch console, right click and select Call attribute from the
shortcut menu to select the call attribute as required.
Figure 5- 11 Dispatcher call attribute setting