Calyx M3b User manual

USER MANUAL

www.calyxlabs.com/resources

What’s in the Box
510-Thread Charger x 1
M3b Battery x 1

QUICK START
It is recommended to full charge the device before first use.
Screw the cartridge onto the battery. To avoid residue buildup, remove the
cartridge if not in use
Turning on The Device
Standby
Mode
Blue
2.8V
Yellow
3.2V
Green
3.6V
1. Press the button 5 times quickly to power on or o. When the device
powers o, the LED blinks for 2 seconds and then fades out. When the
device powers o, the LED blinks for 2 seconds and then fades out.
2. When the device is on, hold the button to start heating up the battery. LED
indicator will light up meaning the device is ready for use. When not
holding the button, the device will stop heating and the LED will fade out.
3. In standby mode, press the button 3 times quickly to adjust the
temperature settings and the corresponding color LED will flash 3 times.
4. With 10 second inhalation protection, the battery will automatically cut out
and stop working if inhale is over 10 seconds.
*Works best with CCELL Cartridges
Warnings
•Do not expose the device to water and keep away from flammable gases
and liquids.
•Do not use in wet environments or extreme temperatures.
•Do not allow the device to be exposed to direct sunlight for prolonged
periods of time.
•Do not allow other metal objects to contact electrical components in the
battery.
• Keep device out of reach of children or pets.
•Do not drop, throw or abuse device.
•Do not attempt to disassemble device as damage and personal injury may
occur.
• M3B contains a lithium ion battery and should be recycled or disposed of
in accordance with local requirements to avoid potential injury and/or
environmental harm.

Charging & Battery Levels
1. Screw in the 510 thread end of the Power Supply into the 510 thread USB
charging adapter.
2. Plug USB into active port or wall adapter.
3. Halo lights up, indicating the device is charging. Halo remains lit during
charging.
4. Halo flashes 20 times and turns o when fully charged.
5. Charging light stays red, even when fully charged. Once device is fully
charged the light on the end of the battery will pulse 10 times and then turn
o, indicating full charge. If device is plugged into an active USB port and
the halo is not lit, the device is fully charged.
THIS DEVICE IS EQUIPPED WITH OVERCHARGE PROTECTION, ALLOWING
IT TO STAY PLUGGED IN UNTIL USED.
Cleaning & Maintenance
Device can be separated to clean the contact points.
•Disconnect the cartridge then clean with a cotton swab and rubbing
alcohol.
•Do not attempt to repair or modify.
• Intended for adult use only.
Device Troubleshooting
Device is not firing:
•Rotate mouthpiece to ensure positive connection.
• Make sure device is charged.
Cart is clogged:
•Do not cover air intake holes during activation.

FOLLOW US: @CALYX_LABS
Visit us at WWW.CALYXLABS.COM
Not for sale to minors.
This product is not designed or intended to vaporize any nicotine or
liquid product.

© CALYX LABS All rights reserved. Subject to alteration.