Cambridge Audio Integrated Amplifier Azur 740A User manual

www.cambridge-audio.com
Tech specs
Azur 740A Advanced
Integrated Amplifier
Azur 740A features
Cambridge Audio’s policy is one of continuous improvement. Design and
specifications are therefore subject to change without prior notice.
Cambridge Audio
Hankey Place, London, SE1 4BB, England
© 2006 Cambridge Audio Ltd
Issued: Jaunuary 2007
ATF™ is a trademark of Analog Devices
Features
100 watts per channel
7 audio inputs, twin binding posts for A and B speakers
Silicon gate control for volume/input selection providing
accurate channel balance and eliminates crosstalk and distortion
CAP5 – Five way protection system (DC detection, over
temperature detection, overvoltage/overcurrent detection, short circuit
detection, intelligent clipping detection)
Massive oversized torodial transformer
Control Bus In/Out, IR Emitter and A-BusTM Ready multi-
room outputs for custom installation
Customisable input/source naming
Input gain trim allows input levels to be harmonised and balanced
Pre-outputs for connecting additional power amplifiers
Adjustable LCD brightness
Full-function aluminium face Azur Navigator remote control
which can control an iPodTM in a docking station
Available in Silver/black
Performance
Power output: 100W RMS into 8 Ohms
150W RMS into 4 Ohms
THD (unweighted): <0.001% 1 kHz at 80% of rated power
<0.01% 20 Hz - 20 kHz at 80% of rated power
Frequencey response: 10 Hz - 50 kHz +/- 1 dB
S/N ratio: (ref 1 W/8 Ohm) > 96 dB
Input impedances: Inputs 1-6 68 k0hm
Tape Input 68 k0hm
Power amp damping factor: > 110 at 1 kHz
Max power consumption: 750W
Minimum power consumption: Active (no signal) 45W
Standby 6W
Bass and treble controls: Shelving type
Max bass boost.cut +/- 10dB at 10 Hz
Max treble boost/cut +/- 7.5 dB at 20 kHz
Dimensions: (H x W x D) 115 x 430 x 350mm (4.5 x 16.0 x 13.8”)
Weight: 10.7kg (23.5Lbs)

Azur 740A Advanced Integrated Amplifier