Cambridge Audio Minx Air100 User manual

Minx Air100/200 Wireless music system
Wi-fi set-up
3
Go to your computer and click on the
WiFi/network logo and select Minx Air_XXX.
2
6
Mac
PC
iPad
Open a new page in your internet browser (Internet Explorer, Safari,
Chrome etc). In the address bar of your browser, type 192.168.1.1
followed by ‘enter’ and the Minx Air setup page will be displayed.
If you are happy that you have entered your details correctly, click
‘OK’ to finish.
The Minx Air set-up page may now display an ‘error’ or ‘no data
received’ type message. Don’t worry, this is normal. You can now
close your internet browser.
4Select your home Wi-Fi network from the ‘Service Set ID (SSID)’
drop-down list of choices. Made a mistake?
To reset the Minx Air, press and hold the power button
and WPS button on the rear panel for 10 - 15 seconds
until the Minx Air switches off. Then start again at Step 1.
You can also watch the Minx Air connection videos on
the Cambridge Audio website for further explanation.
5Type your home Wi-Fi/Network password into the red box,
and click the ‘Apply’ button.
(Don’t know your Wi-Fi password key? It’s commonly found on
a label on your internet modem/router)
7After a few seconds, the Minx Air will be connected to your
network (successful connection is indicated by a solid green light
on the rear of the product). This can take up to 30 seconds.
(If your computer/tablet has not already done so automatically, change the
Wi-Fi/network setting on your computer/tablet back to your home network).
Connect the Minx Air to the mains power and press the power
button on top of the unit. Wait for up to 20 seconds for the
flashing light on the rear panel to flash green and orange
1
iTunes
iPad
iPhone
To enjoy Airplay and internet radio, you must first
connect your Minx Air to your home network.
If you have a laptop computer, tablet, or any
other wi-fi enabled internet browser go to Step 1
below to connect to your home network.
If you have no wi-fi enabled internet browser
(such as a desktop computer) then please see the
online user manual for wired set-up instructions.
Airplay
Congratulations! You are now ready to stream music via Airplay.
When you open iTunes or your Music you will see the
Airplay logo allowing you to select your Minx Air as the
playback device.
Note – when Minx Air is selected, it will take a few seconds
to connect.
Wait for the music to start playing before adjusting the volume.

Bluetooth
Help and Troubleshooting
Get the free
MinxAir App
Search for internet radio stations from
around the world, control the volume,
bass and EQ settings from the comfort of
your armchair.
Free MinxAir App download from the
iTunes App store or Google Play store
(requires iOS 6 or later/Android 3.0 or later).
For set up videos and FAQs visit: www.cambridge-audio.com/MinxAirSetup
Consult the online user manual for more detailed information.
Adjust the bass of your Minx Air to
your listening environment. The bass
can also be controlled from the
MinxAir App and the remote control.
Top tips
Internet
Radio
Bass control
Internet Radio presets –
press to listen to internet radio
Power buttonVolume upVolume down
X Button –
press to listen to the
analogue input
Power button
Volume
Bluetooth
1-10 Internet
Radio presets
Mute
Stop
Bass control
Press the button on the
Minx Air to put your Minx Air
into Bluetooth pairing mode.
Enable Bluetooth connectivity on
your Bluetooth device (eg.
phone, tablet, etc) and pair with
the Minx Air (you may need to
consult your phone or tablet
operating instructions).
Once paired, music from your
device will play through the
Minx Air.
1
Auto power down
The Minx Air will automatically turn
off after four hours use. This
environmental feature can be
adjusted or disabled in the MinxAir
App, available from the iTunes App
store or Google Play store.
2
3
Once you have connected your
Minx Air to your home network
(see overleaf) then you’re ready
to listen to internet radio!
To get you started, we’ve stored
10 of our favourite internet radio
stations in your presets. Presets
1-5 can be easily selected and
played by pressing buttons 1-5 on
the top of the unit.
Presets 1-10 can be selected using
the remote control or the free
MinxAir App.
Also, using the MinxAir App, you
can search for new stations from
around the world and change the
presets to your own preferred
stations.
Bluetooth –
press to listen to Bluetooth
Min Max
X button
Press X once to stop the playback of
Airplay, Bluetooth or Internet radio or to
select the analogue input.
Press X a second time to mute playback of
the analogue input
Minx Air
Minx Air Minx Air
Minx Air
FREE App
Minx Air100/200 Wireless music system
To talk to us, call [phone] (UK Local) or 1 8773578204 (USA)
Register your
Minx Air system
using the App for
FREE lifetime
technical support!