Cambridge Sound Works OontZ Angle 3 User manual

Portable Bluetooth Speaker
Quick Start Guide
Designed and Engineered By
TheOontZ.com

Table of Contents Pages
In the Package
Buttons
Lights
Connectors
Play Horizontally or Vertically
Battery Features
Charging the Battery
Turning On and Off
Pair & Connect - Step 1
Pair & Connect - Step 2 --
-- From Your From Your iPhone, iPad, Smartphone, Tablet and Mobile Devices
-- From Your Apple Mac or Windows Laptop/Computer
-- From Your Amazon Echo Device
To Play with Non-Bluetooth Audio Source Devices Use the 3.5mm Audio Cable
IPX5 Water Resistance
Wireless Hands Free Personal Speakerphone
Troubleshooting & Customer Support
Resetting Your OontZ Angle 3
Safety and Precautions
1
2
3
4
5
6
7 - 8
9
10
11
11
12 - 13
14
15
16
17
18
19 - 20

In the Package
Micro USB Charging Cable
Note: The Micro USB Charging Cable is packed below
the cardboard insert in the box. Slide out the insert to
locate the cable.
Speaker
Quick-Start Guide
Page 1

Volume Up
- Press and Release to increase
volume one level; repeat until
volume raises to desired level
Play/Pause Button
Buttons
Power Button
Bluetooth/Speakerphone Button
Page 2
Button (Dual Function) Button (Dual Function)
Track Advance
- Press and Hold Down
for 2 Seconds
- Holding the button down will
result in track back
Volume Down
- Press and Release to decrease
volume one level; repeat until
volume lowers to desired level
- Holding the button down will
result in track advance
Track Back
- Press and Hold Down
for 2 Seconds Press and Release to Pause/Play
Important - Make sure the volume level is set high on your audio source device. The volume on the OontZ Angle 3 and your audio
source device both need to be set to the highest level for the loudest volume. The volume controls on your audio source device
and the speaker work independently of each other.
Important - The track back feature is application-dependent. Some apps may not support track back, track forward, or play/pause

Lights
Page 3
Red Light lit when charging:
- Slowly flashing Red
battery is charging
- Solid Red
battery is fully charged
Blue Light lit when speaker is on:
- Flashing Blue
speaker is in pairing mode
- Solid Blue
speaker is connected
- Blue Light will turn to
Solid Blue
when the 3.5mm audio
cable is plugged into the
AUX IN Jack

Connectors
AUX IN Jack
Micro USB
Charging Connector
Built-in Mic for
Speakerphone
Page 4
Rubber Flap
- covers connectors
- pull gently from the bottom to access
connectors, it is a snug fit to provide
water resistance
Note: The rubber flap needs
to be closed to keep the
speaker water resistant

Play Horizontally or Vertically
Page 5
– Has its own grille
– Faces bass away from Dual
Precision Stereo Drivers
– Rich bass does not interfere
with Mids and Highs
Passive Bass Radiator
Dual Precision Stereo Drivers
Play Vertically
Controls on top
Play Horizontally
Controls on side

Battery Features
Music Play Time
Up to 12 hours on a full charge, at 2/3 volume.
Louder volumes will reduce the battery play time.
Page 6
- The rechargeable battery comes with a partial
charge and the speaker is ready to play.
- For maximum playtime, fully charge the battery.
- You can play while charging.
Low Charge Remaining
- When the battery charge has less than 15%
remaining the Red Light will begin flashing rapidly.
- The volume will decrease to preserve the
remaining battery charge.
*Exception: when connected to certain devices, including the Amazon
Echo Dot or Amazon Echo, the Power Saving Feature is disabled and
the speaker will remain on until you turn the power off.
Power Saving Feature
- When playing from battery power the OontZ Angle 3 will turn off after
15 minutes of not playing audio to conserve the battery charge. *
- When plugged into a charging source the OontZ Angle 3 will remain on
until you turn the power off.
- You can continue to keep the speaker plugged into a charging source
even when it is fully charged.

Charging the Battery
Page 7
- Insert the small end of the Micro
USB Charging Cable into the Micro
USB Charging Connector as shown.
- Insert the larger end of the Micro
USB Charging cable into a USB wall
charger for a Smartphone or
iPhone, or a USB port on your
laptop/computer to charge the
battery (see illustrations on page 8).
Charging Time:
- Up to 6 hours to fully charge
a low battery.
Red Light lit
when charging:
- Slowly flashing Red
battery is charging
- Solid Red
battery is fully charged

Insert the larger end of the Micro USB charging cable into a USB wall charger for a Smartphone or iPhone
(5V 1.0A up to 5V 2.4A maximum), or a USB port on your laptop/computer to charge the OontZ Angle 3 battery.
Charging the Battery (continued)
Page 8

Turning On and Off
Red Light turns on
- will turn off after 3 seconds if playing from battery power
Press and Release the Power Button
Turn ON
Page 9
Blue Light turns on
Blue Light will turn off
- Flashing Blue
The speaker is turned on and is in pairing mode
- Solid Blue
The speaker is turned on and has connected to an
audio source device and is ready to play
Turn OFF
Press and Hold Down the Power Button for 2 Seconds

Pair & Connect -- Step 1
Page 10
- Make sure your OontZ Angle 3 battery has a sufficient charge, it is not able to connect when the charge is too low.
- Your device needs to be within 100 unobstructed feet of the OontZ Angle 3 to pair and connect. If there is an
issue when connecting please move your device closer to the speaker, then pair and connect.
Turn ON your OontZ Angle 3
Flashing Blue Light
- The OontZ Angle 3 is ready to pair and connect.
Solid Blue Light
- The OontZ Angle 3 has automatically reconnected to the last device it was connected to
and is ready to play.
- The OontZ Angle 3 will automatically try to connect to the last device it was connected to each
time it is turned on and that device is within range.*
The OontZ Angle 3 can be connected to one device at a time.
- To pair and connect to a different device, you need to first disconnect the currently paired device.
- To disconnect the current device, press and hold down the Bluetooth button for 3 seconds.
- The Blue Light will begin flashing and the OontZ Angle 3 is ready to pair and connect to your device.
*Exception: certain devices may not automatically reconnect.
Amazon Echo devices will not automatically reconnect. You will need to say "Alexa, connect my speaker"

Pair & Connect -- Step 2 --
Page 11
- Go to Settings > Bluetooth, check Bluetooth is on
- Select 'OontZ Angle 3 xxx' when it appears under DEVICES
(xxx: 3 characters which are unique to your speaker)
- The speaker will connect in a few seconds
- The Blue Light will turn solid blue and there will be
a quiet chime
- You can now play your audio wirelessly to your
OontZ Angle 3
- Go to Settings > Bluetooth, check Bluetooth is on
- Scan or Search and select 'OontZ Angle 3 xxx' when it appears
under AVAILABLE DEVICES (xxx: 3 characters which are unique to
your speaker)
- The speaker will connect in a few seconds
- The Blue Light will turn solid blue and there will be a quiet chime
- You can now play your audio wirelessly to your OontZ Angle 3
Note: Your Smartphone or Tablet instructions may vary
-- From Your iPhone, iPad, or iPod -- From Your Smartphone, Tablet & Mobile Devices
-- From Your Apple Mac or Windows Laptop/Computer
For the pairing and connecting guide for your Apple Mac or Windows laptop/computer, please visit: TheOontZ.com/pairing
Important: Make sure the volume level is set high on your device. The volume on the OontZ Angle 3 and your device both need to be
set to the highest level for the loudest volume. The volume controls on your device and the speaker work independently of each other.

Pair & Connect -- Step 2 --
-- From Your Amazon Echo device
Page 12
- Open the Alexa app
- Go to the 'Home' menu by pressing the 3 horizontal lines in the upper left corner next to 'Home'
- Press 'Settings'
- Select your Amazon Echo device under 'Devices' by pressing it
- Press 'Bluetooth'
- Select the 'OontZ Angle 3 xxx' (xxx: 3 characters unique to your speaker) when it appears in the list of 'Available Speakers'
- Alexa will announce: "Connected to OontZ Angle 3 xxx"
To connect the next time, turn on the OontZ Angle 3 and say "Alexa, connect my speaker" or "Alexa, pair"
To pair and connect the first time from the Amazon Echo device use the Alexa app on your device.

Important Note: When the OontZ Angle 3 is playing from battery power and connected to the Amazon Echo device, the
speaker will remain on and it will not automatically turn off after 15 minutes of not playing audio.
This will use up the battery charge.
We recommend to:
1) Keep the OontZ Angle 3 plugged into a USB wall charger.
It can remain on and available to play from the Amazon Echo device.
- Or -
2) Turn off the OontZ Angle 3 when you are done listening.
- Either turn off the speaker by pressing and holding down the power button for 2 seconds,
- or say "Alexa, disconnect my speaker" and the OontZ Angle 3 will automatically turn off after 15 minutes.
- When you want to connect and play to the speaker again turn on the OontZ Angle 3 and say "Alexa, connect my speaker"
or "Alexa, pair".
Page 13
Pair & Connect -- Step 2 --
-- From Your Amazon Echo device (continued)
For assistance with the Alexa app, contact Amazon's Customer Service.
Open the Alexa app and select Help & Feedback > Email Customer Service

- Plug one end of a 3.5mm audio cable into the AUX IN Jack on the
back of your speaker.
- Plug the other end of the 3.5mm audio cable into the headphone
jack on your laptop/computer or non-Bluetooth audio device.
- Make sure both ends of the cable are fully inserted
- You are now ready to play.
- Make sure your OontZ Angle 3 battery has a sufficient charge
Page 14
Turn ON your OontZ Angle 3
To Play with Non-Bluetooth Audio Source Devices
Use a 3.5mm Audio Cable
Important: The Bluetooth on the OontZ Angle 3 is disabled when a 3.5mm audio cable is connected to the speaker.
You need to remove the 3.5mm audio cable from the speaker in order to connect to a Bluetooth device.
- Note: When the rubber flap is open to allow a 3.5mm audio cable to be connected, the speaker is not water resistant.
The rubber flap needs to be closed to keep the speaker water resistant.
- Note: The volume control on your device and the speaker work independently of each other. To play the speaker at the loudest
volume, set the volume on your device to maximum and raise the volume on the speaker to maximum.

No more worries about the rain
or getting splashed
Listen to music in the shower
Perfect for taking to the beach
or by the pool
The rubber flap needs to be
closed to keep the speaker
water resistant and dustproof
IPX5 rating - The OontZ Angle 3 can resist gentle water spray & splash but cannot be partially or fully submerged or left in a wet environment
for an extended period of time, any of which could cause unrepairable damage to the speaker.
Safety Precaution: When the OontZ Angle 3 speaker is plugged in to a charging source with the Micro USB
charging cable, never use the speaker in the shower, bath, or near water, to prevent risk of electric shock.
IPX5 Water Resistance
DO NOT allow speaker
to sit in water DO NOT allow speaker to submerge fully or
partially in water
Gentle Water Spray or
Splash is okay
Page 15
When charging or using a 3.5mm audio cable, please keep the speaker away from water as it can be damaged by water entering the connectors.

Wireless Hands Free Personal Speakerphone
- The Wireless Hands Free Personal Speakerphone feature works over
Bluetooth with Smartphones and iPhones only
- This feature is not supported when connected to PCs, laptops, Apple Mac
or other types of devices.
To answer an Incoming Call / To End a Call
- Press and Release the Bluetooth Button
To Reject an Incoming Call
- Press and Hold Down the Bluetooth Button for 3 Seconds.
- Please keep the speaker close in front of you so you may be
heard clearly by the listener.
- You can use your Smartphone or iPhone to switch between using
Hands Free Speakerphone and your phone.
Page 16

Page 17
For issues with your OontZ Angle 3, please view our troubleshooting tips at:
TheOontZ.com/troubleshooting
and select the OontZ Angle 3
If you have any issues with your OontZ Angle 3, our Customer Support Team wants to assist you.
Please contact us at: TheOontZ.com/support and fill in our customer support form.
Customer Support
Troubleshooting

Step 1: Remove the Micro USB charging cable
and 3.5mm Audio cable, if connected.
Step 2: Press and hold down the Power button
and button together for 1 second, then release.
Step 3: The speaker has now been reset and
you can turn it on.
Resetting Your OontZ Angle 3
Page 18