CAMBRIDGE CXA60 User manual
CXA60/80
INTEGRATED AMPLIFIER
8CAMBRIDGE
Cambridge
Audio
~
ill
...,.
~
GREATBRITISH
..
...._
_SOUND
SI
NCE1961
2
Make sure you register your purchase.
Visit: www.cambridgeaudio.com/vip
%\UHJLVWHULQJ\RXOOEHWKHðUVWWRNQRZ
about:
Future product releases
Software upgrades
1HZVHYHQWVDQGH[FOXVLYHRσHUVSOXV
competitions!
© Copyright Cambridge Audio Ltd 2015.
Contents
Remote control................................................................................................ 2
Front panel controls ........................................................................................ 3
Rear panel connections................................................................................... 3
Connections .................................................................................................... 4
Setup menu ..................................................................................................... 5
Control Bus ..................................................................................................... 5
Remote control
1. Display
brightness
Adjusts the brightness of the
front panel display.
2. Mute
3. Standby/On
4. Sources
Press to access the input
source directly.
5. Volume up/down
1
2
4
3
5
5
3
CXA60/80
Front panel controls
1 2 3
4 8
9 10
11
5 6 7
1. Standby/On
2. (MP3) input
For connection to a portable audio device.
3. Headphones
For suitable headphones – connection will mute the speakers.
4. Analogue source (A1-A4)
A1 – Toggles between balanced/unbalanced.
A4 – Toggles between unbalanced/MP3 input.
5. Direct
Disables tone and balance controls.
6. Speaker A/B select
7. Mute
8. Digital source (D1-D3 / )
Pressing the button will toggle between inputs.
9. Balance
10. Bass and Treble
11. Volume
Rear panel connections
Power AC
Out In
OutIn
USB Audio In D3BT100 D2 D1
LeftRight
Left Right
Power Rating:220–230V AC ~ 50/60Hz
Max Power Consumption: 750W
Ground/Lift
Switch
LiftGnd
S/P DIF
Co-axial In Toslink
Optical In
Toslink
Optical In
(Unbalanced)
(Unbalanced)
(Balanced)
(Balanced)
Right
Right
Left
Left
www.cambridgeaudio.com
CXA80 Integrated Amplifier
Designed & Engineered in UK
Made in China
Pre-out A2 A1A3A4Sub-Out
Control Bus
1
2
3 4 65
7 8 9 10
1. AC power socket
2. Loudspeaker terminals
3. Sub Out
4. Pre-out
5. Analogue inputs (A2, A3 and A4)
6. A1 input
Note: Balanced (XLR) is available on the CXA80 only.
7. USB Audio In (CXA80 only)
For connecting to PC/MAC computers.
Ground/Lift switch
Set this switch to 'Lift' if a humming noise can be heard through the speakers.
Otherwise, leave this switch setting to 'Ground' as recommended.
8. Control Bus
For more information, see 'Control Bus' section of this manual.
9. BT100 (not supplied)
For connection with the optional BT100 Bluetooth audio receiver.
10. Digital inputs (D1, D2 and D3)
4
Connections
Note::^P[JO[OLWV^LYVɈILMVYLTHRPUNJVUULJ[PVUZ
Basic connections
Connecting to a CD player using the D3 coaxial digital input source and a pair
of loudspeakers.
Power A
C
O
u
t
I
n
Ou
t
I
n
U
S
B Audio In
D
3
BT
100
D
2
D
1
Le
ft
R
ight
Left Righ
t
P
ower Ratin
g
:
22
0
–2
30
V A
C
~ 5
0
/
60
Hz
Max Power
C
onsum
p
tion:
7
50
W
G
round/Lift
Switc
h
L
i
f
t
G
n
d
S
/P DIF
C
o-axial In
T
o
s
link
Optical In
T
o
s
link
Optical In
(
Unbalanced
)
(
Unbalanced
)
(
Balanced)
(
Balanced
)
Rig
ht
Ri
g
ht
Le
f
t
L
e
ft
www.cambridgeaudio.co
m
C
XA80 Integrated Amplifie
r
D
esi
g
ned & En
g
ineered in UK
Made in
C
hina
P
r
e
-
o
ut
A2
A
1
A3
A
4Sub-
O
u
t
C
ontrol Bus
In
O
u
t
In
O
ut
M
ains Voltage
S
elector
S
witch
:
1
00
-12
0
V/22
0
-24
0
V A
C
~5
0
/
60
H
z
S
/P DIF
C
o-axial
T
o
s
lin
k
Optica
l
Digital Outputs
Digital Outputs
Di
g
ital Outputs
IR In
IR In
Control Bus
Control Bus
IR I
n
C
ontrol Bu
s
Power A
C
D3
Left Right
S/P DIF
Co-axial In
www.cambridgeaudio.com
CXA80 Integrated Amplifier
Designed & Engineered in UK
Made in China
S/P DIF
Co-axial
Digital Outputs
Digital Outputs
Speaker B connections
Connecting a second set of speakers.
Power A
C
Ou
t
I
n
O
u
t
I
n
U
S
B Audio I
n
D
3BT10
0
D2
D1
L
e
f
t
R
ig
h
t
Lef
tRi
ght
P
ower
R
at
i
n
g
:
2
2
0
–2
30
V A
C
~ 5
0
/
60
Hz
Max Power Consumption: 750
W
Ground/Lift
S
witch
Lif
t
G
nd
S
/P DIF
C
o-axial I
n
T
o
s
link
Optical I
n
To
s
link
Optical In
(
Unbalanced
)
(
Unbalanced
)
(
Balanced
)
(
Balanced
)
R
ig
ht
Rig
ht
Lef
t
Le
ft
www.cam
b
r
id
geau
di
o.com
C
XA80 Inte
g
rated Amplifier
D
esigned
&
Engineered in UK
M
ade in
C
hina
Pr
e
-
o
u
t
A2 A1A
3
A
4
S
ub-
O
ut
Control Bu
s
LeftRight
Left Right
www.cambridgeaudio.com
CXA80 Integrated Amplifier
Designed & Engineered in UK
Made in China
Preamp Out connections
Connecting the CXA to an active subwoofer via the Line In inputs on the
subwoofer.
Power AC
O
u
t
I
n
O
ut
I
n
US
B Audio I
n
BT
100
D2
D1
L
eftRi
gh
t
P
ower Rating
:
220–230V AC ~ 50/60Hz
Max Power Consum
p
tion: 750
W
G
round/Lift
S
witch
L
i
ft
Gn
d
T
oslink
O
ptical I
n
T
oslin
k
O
ptical In
(
Unbalanced
)
(Unbalanced)
(Balanced
)
(
Balanced
)
Ri
g
h
t
R
ig
h
t
L
e
f
t
L
e
ft
P
r
e
-
o
ut A2 A1A
3
A4Sub-Out
C
ontrol Bu
s
D
3
D3
Le
f
t
Left
R
i
g
ht
Right
S
/P DIF
S/P DIF
C
o-axial In
Co-axial In
www.cambridgeaudio.co
m
www.cambridgeaudio.com
CXA80 Integrated Amplifie
r
CXA80 Integrated Amplifier
Designed & Engineered in UK
Designed & Engineered in UK
M
ade in
C
hina
Made in China
www.cambridgeaudio.com
CXA80 Integrated Amplifier
Designed & Engineered in UK
Made in China
www.cambridgeaudio.com
CXA80 Integrated Amplifier
Designed & Engineered in UK
Made in China
Line
In
Pre-out
Balanced audio connections (CXA80 only)
Connecting the CXA80 to the CXN Network player using XLR cables. Access
this input by pressing the 'A1' input button twice on the front panel.
Power A
C
O
u
t
I
n
O
u
t
I
n
US
B Audio In D
3
BT10
0
D
2D
1
Le
ftRi
gh
t
L
e
f
t
R
i
gh
t
P
ower
R
at
i
ng
:
220–230V A
C
~ 50/60Hz
M
ax Power Consumption: 750
W
G
round/Lift
S
witc
h
Lif
t
Gnd
S
/P DI
F
C
o-axial In Toslink
O
ptical In
Toslink
O
ptical In
(
Unbalanced
)
(
Unbalanced
)
(
Balanced
)
(
Balanced
)
Righ
t
Ri
g
h
t
L
eft
L
e
f
t
www.cambridgeaudio.co
m
CXA80 Inte
g
rated Amplifie
r
Designed & Engineered in UK
Made in China
Pre-out A
2
A
1A
3
A4
S
ub-
O
ut
C
ontrol Bu
s
V
o
l
tage
R
at
i
ng: 100-230V AC ~ 50/60Hz
R
ated Power Consumption: 30
W
D
1
Toslink
Op
tical
D2
S
/P DIF
C
o-axia
l
Ethernet
Ethernet
ToslinkO
p
tica
l
S
/P DIF Co-axial
G
round/Lift
S
witch
Ri
g
h
t
L
e
f
t
R
i
g
ht
Le
ft
L
i
f
tGnd
Digital Outputs
Digital Outputs
USB Audio In
USB Audio In
Digital Inputs
Digital Inputs
USB
USB
Et
h
ernet
D
igital Outputs U
S
B Audio In
D
igital InputsU
S
B
F
or local media
In
O
ut
C
ontrol Bus
Balanced Audio Output
Balanced Audio Output
Balanced Audio Output
Line Output
Line Output
Line Outpu
t
I
R In
Wi-Fi Dongle
F
o
r l
o
c
a
l m
ed
i
a
Wi-Fi Don
g
le
Power A
C
CXN Network Playe
r
Designed & Engineered in UK
Made in China
www.cambridgeaudio.com
CXA80 Integrated Amplifier
Designed & Engineered in UK
Made in China
www.cambridgeaudio.com
CXA80 Integrated Amplifier
Designed & Engineered in UK
Made in China
(Balanced)
(Balanced)
Right
Right
Left
Left
A1
Right Left
RightLeft
Balanced Audio Output
Balanced Audio Output
Optional BT100 for bluetooth audio streaming (not
supplied)
Connect the optional BT100 into the rear USB socket as shown in the diagram
and access this input via the button. For more information, see the guide
that came with your BT100.
Power A
C
Out
I
n
O
ut
I
n
U
S
B Audio In D
3
BT1
00
D2
D1
L
e
f
t
R
ig
ht
L
e
ft
Rig
ht
P
ower Ratin
g
:
22
0
–2
30
V A
C
~ 5
0
/
60
Hz
Max Power Consumption: 750
W
G
round/Lif
t
S
witch
Lif
t
Gnd
S/P DIF
C
o-axial In
T
oslink
Optical In
T
oslink
O
ptical In
(
Unbalanced
)
(
Unbalanced
)
(
Balanced
)
(
Balanced
)
Rig
h
t
R
i
g
ht
L
e
f
t
Lef
t
www.cam
b
r
id
geau
di
o.com
CXA80 Integrated Amplifier
D
esigned & Engineered in UK
M
ade in China
Pre-out
A
2A1A
3
A
4
S
ub-
O
ut
Control Bu
s
BT100
www.cambridgeaudio.com
CXA80 Integrated Amplifier
Designed & Engineered in UK
Made in China
USB audio connection (CXA80 only)
Note: <ZL H JLY[PÄLK OPNO ZWLLK <:) (¶) JHISL (JJLZZ [OPZ PUW\[ I`
pressing the input button twice on the front panel.
Power A
C
O
ut In
O
utIn
U
S
B Audio In D
3
BT10
0
D2
D1
L
eft
R
i
ght
Le
f
t
Ri
ght
P
ower
R
at
i
ng
:
220–230V A
C
~ 50/60Hz
Max Power
C
onsum
p
tion: 750
W
Ground/Lif
t
Switch
Li
ft
G
nd
S
/P DIF
C
o-axial In To
s
link
Optical In
T
o
s
link
O
ptical In
(
Unbalanced
)
(
Unbalanced
)
(
Balanced
)
(
Balanced
)
Righ
t
R
ig
h
t
Le
ft
L
e
f
t
www.cam
b
r
idg
eau
di
o.com
C
XA80 Inte
g
rated Amplifier
D
esigned & Engineered in UK
M
ade in
C
hina
Pr
e
-
o
ut
A
2A1A
3
A
4
S
ub-
O
ut
Control Bu
s
USB Audio In
Ground/Lift
Switch
LiftGnd
www.cambridgeaudio.com
CXA80 Integrated Amplifier
Designed & Engineered in UK
Made in China
5
CXA60/80
Setup menu
Access the Setup menus in Standby mode. Press and hold the Speaker A/B
I\[[VU\U[PS[OL()SPNO[ZÅHZOHS[LYUH[LS`HUK[OLZV\YJLZ((SPNO[\W:LL
ILSV^ZV\YJLI\[[VUZMVYZL[\WJVUÄN\YH[PVU!
Note: Button selected is represented by Blue light.
Auto power down (APD)
(VɈ(VɈ¶+PZHISLZ[OL(7+(\[VWV^LYKV^UM\UJ[PVU
(VU(VɈ¶:L[Z[OL(7+[PTL[VTPU\[LZ
(VɈ(VU¶:L[Z[OL(7+[PTL[VTPU\[LZ
A1 on/A2 on – Sets the APD time to 60 minutes.
Clipping function
A3 on – Clipping function enabled. The volume nudges down if signal clipping
is detected.
(VɈ¶*SPWWPUNM\UJ[PVUPZKPZHISLK
USB mode (CXA80 only)
A4 on – Puts the CXA in USB Class 2 mode.
(VɈ¶7\[Z[OL*?(PU<:)*SHZZTVKL
Notes:
– To save the setup settings and exit the setup menu, press the Speaker A/B
button.
– Pressing the Standby/On button while in the setup menu will exit and not
save the settings.
Control Bus
The Control Bus allows any compatible Cambridge products to synchronise
when powering up the units. See the following diagrams when connecting the
CXA using the provided Control Bus cable.
Another added feature with this Control Bus is the use of the Cambridge
Connect app. You can use the Cambridge Connect app to control the CXA
via the CXN.
Cambridge Connect app (via CXN)
>OLU\ZPUN[OLHWW[V[\YU[OL*?5VUVɈ[OPZ^PSSHSZV[\YU[OL*?(VUVɈ
The app can also be used to control the volume of the CXA. Connect the CXN
control bus out to CXA in. For more information, see the CXN manual.
Power A
C
Ou
t
In
Ou
t
I
n
US
B Audio In
D3
BT
1
00
D
2
D
1
L
e
f
tRi
g
h
t
L
eft Righ
t
P
ower
R
at
i
ng
:
22
0
–2
30
V A
C
~ 5
0
/
60
Hz
Max Power
C
onsumption: 750
W
Ground/Lif
t
Switc
h
Lif
t
G
nd
S
/P DI
F
Co-axial I
n
T
o
s
link
O
p
tical I
n
T
o
s
link
O
p
tical I
n
(
Unbalanced
)
(
Unbalanced
)
(
Balanced
)
(
Balanced
)
R
ig
ht
R
ig
ht
Lef
t
Lef
t
www.cambridgeaudio.com
C
XA80 Integrated Amplifier
Designed & Engineered in U
K
Made in
C
hin
a
Pr
e
-
o
u
t
A
2
A1A
3
A
4
S
ub-
O
ut
Control Bu
s
Volta
g
e Ratin
g:
1
00
-2
30
V A
C
~ 5
0
/
60
Hz
Rated Power
C
onsumption: 30
W
D
1
ToslinkOptical
D2
S/P DIF Co-axia
l
Ethernet
Ethernet
ToslinkOpticalS/P DIF Co-axia
l
G
round/Lif
t
Switch
Rig
ht
L
e
f
t
R
ightL
e
f
t
L
if
t
Gnd
Digital Outputs
Digital Outputs
USB Audio In
USB Audio In
Digital Inputs
Digital Inputs
USB
USB
E
th
e
rn
et
Digital Outputs U
S
B Audio I
n
D
igital InputsU
S
B
F
o
r l
o
c
a
l m
ed
i
a
I
nOut
C
ontrol Bus
Balanced Audio Output
Balanced Audio Output
Balanced Audio
O
utpu
t
Line Output
Line Output
L
ine
O
utput
I
R
In
Wi-Fi Dongle
For local me
d
i
a
Wi-Fi Dongle
Power A
C
In
In
www.cambridgeaudio.com
CXA80 Integrated Amplifier
Designed & Engineered in UK
Made in China
Control Bus
Control Bus
Out
CXA with CXC
>OLU[\YUPUN[OL*?(VUVɈ[OPZ^PSSHSZV[\YU[OL*?*VUVɈ*VUULJ[[OL
CXA control bus out to CXC in.
Power A
C
Ou
t
In
Ou
t
I
n
US
B Audio In
D3
BT
1
00
D
2
D
1
Le
ftRi
g
h
t
L
eft
R
ight
P
ower
R
at
i
ng
:
2
20–230V AC ~ 50/60Hz
Max Power Consum
p
tion: 750W
Ground/Lif
t
S
witc
h
Lif
t
G
nd
S
/P DI
F
C
o-axial I
n
T
o
s
link
O
p
tical I
n
T
o
s
link
O
p
tical I
n
(
Unbalanced
)
(
Unbalanced
)
(
Balanced
)
(
Balanced
)
R
ig
ht
R
igh
t
Lef
t
Le
ft
www.cambrid
g
eaudio.com
C
XA80 Inte
g
rated Amplifier
Designed & Engineered in U
K
Made in Chin
a
Pr
e
-
o
u
t
A
2
A1A
3
A
4
S
ub-
O
ut
Control Bus
In
O
ut
In
O
ut
Mains Volta
g
e
S
elector
S
witch:
100
-12
0
V/22
0
-24
0
V A
C
~5
0
/
60
H
z
S/P DI
F
C
o-axia
l
T
oslin
k
Optical
Digital Outputs
Digital Outputs
D
igital
O
utputs
IR In
IR In
Control Bus
Control Bus
I
R
In
C
ontrol Bu
s
Power A
C
Out
Out
www.cambridgeaudio.com
CXA80 Integrated Amplifier
Designed & Engineered in UK
Made in China
Control Bus
In
In
Control Bus
Control Bus
CXA with CXN
Note: Without using the Cambridge Connect app to control the CXA.
>OLU[\YUPUN[OL*?(VUVɈ[OPZ^PSSHSZV[\YU[OL*?5VUVɈ*VUULJ[[OL
CXA control bus out to CXN in.
P
ower A
C
O
ut
In
O
ut
I
n
U
S
B Audio In
D3
BT
100
D
2
D
1
Le
ft
Ri
g
h
t
L
eft Righ
t
P
ower Rating
:
22
0
–2
30
V A
C
~ 5
0
/
60
H
z
M
ax Power Consumption: 750
W
G
round/Lift
Switch
Lif
t
G
nd
S
/P DIF
C
o-axial I
n
Toslink
O
ptical I
n
Toslink
O
ptical I
n
(
Unbalanced
)
(
Unbalanced
)
(
Balanced
)
(
Balanced
)
Righ
t
Rig
h
t
L
e
ft
Lef
t
www.cam
b
r
idg
eau
di
o.com
C
XA80 Integrated Amplifier
Designed & Engineered in U
K
Made in Chin
a
Pr
e
-
o
ut A2 A1A
3
A4
S
ub-
O
ut
Control Bus
V
olta
g
e Ratin
g
:1
00
-2
30
V A
C
~ 5
0
/
60
Hz
R
ated Power Consumption: 30W
D
1
ToslinkO
p
tica
l
D
2
S
/P DIF Co-axia
l
Ethernet
Ethernet
T
oslink
O
pticalS/PDIF
C
o-axial
G
round/Lif
t
S
witc
h
Rig
ht
L
e
ft
Rig
h
t
L
ef
t
L
if
t
G
nd
Digital Outputs
Digital Outputs
USB Audio In
USB Audio In
Digital Inputs
Digital Inputs
USB
USB
Ethernet Digital
O
utput
s
U
S
B Audio In
D
igital Input
s
US
B
For local me
d
ia
I
n
O
ut
Control Bu
s
Balanced Audio Output
Balanced Audio Output
B
alanced Audio Outpu
t
Line Output
Line Output
Line Output
IR I
n
Wi-Fi Dongle
Fo
r l
o
c
a
l m
ed
i
a
Wi-Fi Don
g
le
P
ower A
C
Out
Out
www.cambridgeaudio.com
CXA80 Integrated Amplifier
Designed & Engineered in UK
Made in China
Control Bus
In
Control Bus
CXA with CXN and CXC
Using the CXA as the primary power controller, see the diagram below. When
[\YUPUN[OL*?(VUVɈ[OPZ^PSSHSZV[\YU[OL*?5HUK*?*VUVɈ
P
ower A
C
O
ut I
n
O
u
t
I
n
U
S
B Audio In
D3
BT1
00
D
2
D
1
L
eftRigh
t
L
e
f
t Rig
h
t
P
ower Rating
:
220–230V AC ~ 50/60H
z
M
ax Power Consumption: 750
W
G
round/Lif
t
S
witch
Li
ft
G
nd
S/P DIF
C
o-axial I
n
Toslink
Optical I
n
Toslink
Optical I
n
(
Unbalanced
)
(
Unbalanced
)
(
Balanced
)
(
Balanced
)
Ri
g
h
t
Rig
h
t
L
e
ft
Le
ft
w
ww.cambrid
g
eaudio.com
CXA80 Inte
g
rated Amplifier
D
esigned & Engineered in U
K
Made in
C
hin
a
P
re-out
A
2
A
1
A3
A
4
S
ub-
O
ut
Control Bus
V
o
l
tage
R
at
i
ng: 100-230V A
C
~ 50/60Hz
R
ated Power Consum
p
tion:
30
W
D
1
ToslinkO
p
tica
l
D2
S
/P DIF Co-axial
Ethernet
Ethernet
T
oslink
O
pticalS/PDIF
C
o-axial
G
round/Lift
S
witc
h
Righ
t
Le
f
t
Rig
h
t
L
ef
t
Li
ft
G
nd
Digital Outputs
Digital Outputs
USB Audio In
USB Audio In
Digital Inputs
Digital Inputs
USB
USB
Ethernet Di
g
ital Output
s
U
S
B Audio In
D
i
g
ital Input
s
US
B
For local me
d
i
a
In
O
u
t
Control Bu
s
Balanced Audio Output
Balanced Audio Output
B
alanced Audio Out
p
u
t
Line Output
Line Output
Line Out
p
ut
IR I
n
Wi-Fi Dongle
Fo
r l
o
c
a
l m
ed
i
a
Wi-Fi Don
g
le
Power A
C
In Out
In
O
ut
Mains Volta
g
e
S
elector
S
witch
:
1
00
-12
0
V/22
0
-24
0
V A
C
~5
0
/
60
H
z
S
/P DIF
C
o-axia
l
T
oslink
Optica
l
Digital Outputs
Digital Outputs
Digital
O
utput
s
IR In
IR In
Control Bus
Control Bus
I
R
In
C
ontrol Bus
Power A
C
Out
Out
www.cambridgeaudio.com
CXA80 Integrated Amplifier
Designed & Engineered in UK
Made in China
Control Bus
Control Bus
In
In
Control Bus
Control Bus
In
Out
Out
Adding an additional connection from CXN to CXA will enable the use of the
Cambridge Connect app function.
P
ower A
C
O
ut
In
O
u
t
In
U
S
B Audio In
D3
BT1
00
D
2
D
1
Le
ftRigh
t
Le
ft Ri
g
ht
P
ower Ratin
g
:
220–230V A
C
~ 50/60H
z
M
ax Power Consum
p
tion: 75
0W
G
round/Lif
t
S
witch
Li
ft
G
nd
S
/P DIF
C
o-axial I
n
Toslink
Optical I
n
Toslink
Optical I
n
(
Unbalanced
)
(
Unbalanced
)
(
Balanced
)
(
Balanced
)
Rig
ht
Right
Left
L
e
f
t
w
ww.cambrid
g
eaudio.com
C
XA80 Inte
g
rated Amplifier
D
esigned & Engineered in U
K
Made in
C
hin
a
P
re-out
A
2
A
1
A3
A
4
S
ub-
O
ut
Control Bus
V
o
l
tage
R
at
i
ng: 100-230V A
C
~ 50/60Hz
R
ated Power Consum
p
tion:
30
W
D
1
Toslink
O
ptica
l
D2
S/P DIF
C
o-axial
Ethernet
Ethernet
T
oslink OpticalS/PDIF Co-axial
Ground/Lift
Switc
h
Rig
ht
Left
Rig
h
t
L
e
ft
Li
ft
G
nd
Digital Outputs
Digital Outputs
USB Audio In
USB Audio In
Digital Inputs
Digital Inputs
USB
USB
Ethernet Di
g
ital Output
s
U
S
B Audio In
D
i
g
ital Input
s
US
B
For local me
d
i
a
In
O
u
t
Control Bu
s
Balanced Audio Output
Balanced Audio Output
B
alanced Audio Out
p
u
t
Line Output
Line Output
Line Out
p
ut
IR I
n
Wi-Fi Dongle
Fo
r l
o
c
a
l m
ed
i
a
Wi-Fi Don
g
le
Power A
C
In
O
ut
In
O
ut
Mains Volta
g
e
S
elector
S
witch
:
1
00
-12
0
V/22
0
-24
0
V A
C
~5
0
/
60
H
z
S/P DIF
C
o-axia
l
T
oslink
Optica
l
Digital Outputs
Digital Outputs
Digital Output
s
IR In
IR In
Control Bus
Control Bus
IR InControl Bus
Power A
C
Out
Out
www.cambridgeaudio.com
CXA80 Integrated Amplifier
Designed & Engineered in UK
Made in China
Control Bus
Control Bus
In
In
Control Bus
Control Bus
In
Out
Out
In
In
Out
Cambridge Audio is a brand of Audio Partnership Plc
9LNPZ[LYLK6ɉJL!.HSSLY`*V\Y[/HURL`7SHJL
London SE1 4BB, United Kingdom
Registered in England No. 2953313
www.cambridge-audio.com
© 2015 Cambridge Audio Ltd
AP34135/1
<
CXA60/80
INTEGRATED AMPLIFIER
8CAMBRIDGE
~~
EAT
BRITISH
~~UNO
SINCE1968
2
Make sure you register your purchase.
Visit: www.cambridge-audio.com/sts
%\UHJLVWHULQJ\RXOOEHWKHðUVWWRNQRZ
about:
Future product releases
Software upgrades
1HZVHYHQWVDQGH[FOXVLYHRσHUVSOXV
competitions!
This guide is designed to make installing and using this product as
easy as possible. Information in this document has been carefully
checked for accuracy at the time of printing; however, Cambridge
Audio's policy is one of continuous improvement, therefore design
HUKZWLJPÄJH[PVUZHYLZ\IQLJ[[VJOHUNL^P[OV\[WYPVYUV[PJL
This document contains proprietary information protected by
copyright. All rights are reserved. No part of this manual may be
reproduced by any mechanical, electronic or other means, in any
form, without prior written permission of the manufacturer. All
trademarks and registered trademarks are the property of their
respective owners.
© Copyright Cambridge Audio Ltd 2015.
Cambridge Audio and the Cambridge Audio logo are trademarks
of Cambridge Audio.
Contents
Important safety instructions......................................................................... 3
Limited warranty............................................................................................. 4
Front panel controls ....................................................................................... 5
Rear panel connections ................................................................................. 6
Remote control............................................................................................... 7
Connections.................................................................................................... 8
Basic connections ....................................................................................... 8
Speaker B connections................................................................................ 8
Preamp Out connections ............................................................................. 8
Balanced audio connections (CXA80 only) ................................................... 8
USB audio connection (CXA80 only)............................................................. 9
Advanced USB audio .................................................................................. 9
Use with PCs .............................................................................................. 9
Use with Macs ............................................................................................ 9
Use with Linux ............................................................................................. 9
Optional BT100 for bluetooth audio streaming (not supplied).......................... 9
BT100 controls and connections................................................................ 10
Setup menu................................................................................................... 10
Auto power down (APD)............................................................................. 10
Clipping function........................................................................................ 10
USB mode (CXA80 only)............................................................................ 10
Control Bus ................................................................................................... 10
CAP5 - Five way protection system ............................................................ 12
Troubleshooting............................................................................................ 12
7HFKQLFDOVSHFLðFDWLRQV............................................................................... 13
3
CXA60/80
Important safety instructions
For your own safety please read the following important safety instructions
carefully before attempting to connect this unit to the mains power supply.
They will also enable you to get the best performance from and prolong the
life of the unit:
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers,
Z[V]LZVYV[OLYHWWHYH[\ZPUJS\KPUNHTWSPÄLYZ[OH[WYVK\JLOLH[
9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A
grounding-type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the provided
WS\NKVLZUV[Ä[PU[V`V\YV\[SL[JVUZ\S[HULSLJ[YPJPHUMVYYLWSHJLTLU[VM
the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at
plugs, convenience receptacles and the point where they exit from the
apparatus.
6US`\ZLH[[HJOTLU[ZHJJLZZVYPLZZWLJPÄLKI`[OLTHU\MHJ[\YLY
12. Use with only the cart, stand, tripod, bracket, or table
ZWLJPÄLK I` [OL THU\MHJ[\YLY VY ZVSK ^P[O [OL HWWHYH[\Z
When a cart is used, use caution when moving the cart/
HWWHYH[\ZJVTIPUH[PVU[VH]VPKPUQ\Y`MYVT[PWV]LY
13. Unplug this apparatus during lightning storms or when unused for long
periods of time.
9LMLY HSS ZLY]PJPUN [V X\HSPÄLK ZLY]PJL WLYZVUULS :LY]PJPUN PZ YLX\PYLK
when the apparatus has been damaged in any way, such as the power-
supply cord or plug having been damaged, liquid has been spilled or
VIQLJ[ZOH]LMHSSLUPU[V[OLHWWHYH[\Z[OLHWWHYH[\ZOHZILLUL_WVZLK[V
rain or moisture, does not operate normally, or has been dropped.
WARNING
ò7RUHGXFHWKHULVNRIðUHRUHOHFWULFVKRFNGRQRWH[SRVHWKLVXQLWWRUDLQ
or moisture.
– Batteries (battery pack or batteries installed) shall not be exposed to
H[FHVVLYHKHDWVXFKDVVXQVKLQHðUHRUWKHOLNH
The unit is of Class 1 construction and must be connected to a mains socket
outlet with a protective earthing connection.
The unit must be installed in a manner that makes disconnection of the mains
plug from the mains socket outlet (or appliance connector from the rear of the
\UP[WVZZPISL>OLYL[OLTHPUZWS\NPZ \ZLK HZ [OL KPZJVUULJ[ KL]PJL [OL
disconnect device shall remain readily operable.
Only use the mains cord supplied with this unit. Please ensure there is ample
ventilation. We recommend that you do not place the unit in an enclosed
space; if you wish to place the unit on a shelf, use the top shelf to allow
TH_PT\T]LU[PSH[PVU+VUV[W\[HU`VIQLJ[ZVU[VWVM[OPZ\UP[+VUV[ZP[\H[L
it on a rug or other soft surface and do not obstruct any air inlets or outlet
grilles. Do not cover the ventilation grilles with items such as newspapers,
tablecloths, curtains, etc.
This unit must not be used near water or exposed to dripping or splashing
^H[LYVYV[OLYSPX\PKZ5VVIQLJ[ZÄSSLK^P[OSPX\PKZ\JOHZ]HZLZZOHSSIL
placed on the unit.
;OL SPNO[UPUN ÅHZO ^P[O [OL HYYV^OLHK Z`TIVS ^P[OPU HU LX\PSH[LYHS [YPHUNSL
is intended to alert the user to the presence of un-insulated ‘dangerous
]VS[HNL»^P[OPU[OLWYVK\J[»ZLUJSVZ\YL[OH[TH`ILVMZ\ɉJPLU[THNUP[\KL[V
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance instructions in
the service literature relevant to this appliance.
WEEE symbol
The crossed-out wheeled bin is the European Union symbol
for indicating separate collection for electrical and electronic
equipment. This product contains electrical and electronic
equipment which should be reused, recycled or recovered and
should not be disposed of with unsorted regular waste. Please
return the unit or contact the authorised dealer from whom you
purchased this product for more information.
CE mark
This product complies with European Low Voltage (2006/95/
,* ,SLJ[YVTHNUL[PJ *VTWH[PIPSP[` ,* HUK
,U]PYVUTLU[HSS`MYPLUKS` KLZPNU VM ,ULYN`YLSH[LK 7YVK\J[Z ,*
Directives when used and installed according to this instruction manual. For
continued compliance only Cambridge Audio accessories should be used
^P[O[OPZWYVK\J[HUKZLY]PJPUNT\Z[ILYLMLYYLK[VX\HSPÄLKZLY]PJLWLYZVUULS
C-Tick mark
This product meets the Australian Communications Authority’s
Radio communications and EMC requirements.
CU-TR Mark
This product meets Russia, Byelorussia and Kazakhstan
electronic safety approvals.
FCC regulations
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO
OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS
TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER
AUTHORITY TO OPERATE THE EQUIPMENT.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
YLJLW[PVU^OPJOJHUILKL[LYTPULKI`[\YUPUN[OLLX\PWTLU[VɈHUKVU[OL
user is encouraged to try to correct the interference by one or more of the
following measures:
- Re-orient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
*VUULJ[[OLLX\PWTLU[PU[VHUV\[SL[VUHJPYJ\P[KPɈLYLU[MYVT[OH[[V^OPJO
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
4
Limited warranty
Ventilation
IMPORTANT – The unit will become hot when in use. Do not stack multiple
units on top of each other. Do not place in an enclosed area such as a
IVVRJHZLVYPUHJHIPUL[^P[OV\[Z\ɉJPLU[]LU[PSH[PVU
Do not remove the feet from this product they are required to ensure enough
HPYÅV^
,UZ\YL [OH[ ZTHSS VIQLJ[Z KV UV[ MHSS [OYV\NO HU` ]LU[PSH[PVU NYPSSL 0M [OPZ
OHWWLUZ Z^P[JO VɈ PTTLKPH[LS` KPZJVUULJ[ MYVT [OL THPUZ Z\WWS` HUK
contact your dealer for advice.
Positioning
Choose the installation location carefully. Avoid placing it in direct sunlight or
JSVZL[VHZV\YJLVMOLH[5VUHRLKÅHTLZV\YJLZZ\JOHZSPNO[LKJHUKSLZ
ZOV\SKILWSHJLKVU[OL\UP[(SZVH]VPKSVJH[PVUZZ\IQLJ[[V]PIYH[PVUHUK
excessive dust, cold or moisture. The unit can be used in a moderate climate.
This unit must be installed on a sturdy, level surface. Do not place in a sealed
area such as a bookcase or in a cabinet. Do not place the unit on an unstable
Z\YMHJLVYZOLSM;OL\UP[TH`MHSSJH\ZPUNZLYPV\ZPUQ\Y`[VHJOPSKVYHK\S[HZ
well as serious damage to the product. Do not place other equipment on top
of the unit.
+\L [V Z[YH` THNUL[PJ ÄLSKZ [\YU[HISLZ VY *9; ;=Z ZOV\SK UV[ IL SVJH[LK
nearby due to possible interference.
Electronic audio components have a running in period of around a week (if
\ZLK ZL]LYHS OV\YZ WLY KH` ;OPZ ^PSS HSSV^ [OL UL^ JVTWVULU[Z [V ZL[[SL
down and the sonic properties will improve over this time.
Power sources
The unit should be operated only from the type of power source indicated
on the marking label. If you are not sure of the type of power-supply to your
home, consult your product dealer or local power company.
;OPZ\UP[JHUILSLM[PU:[HUKI`TVKL^OLUUV[PU\ZLHUK^PSSKYH^#>PU
[OPZZ[H[L;V[\YU[OL\UP[VɈ\UWS\NP[MYVT[OLTHPUZZVJRL[
Overloading
Do not overload wall outlets or extension cords as this can result in a risk of
ÄYLVYLSLJ[YPJZOVJR6]LYSVHKLK(*V\[SL[ZL_[LUZPVUJVYKZMYH`LKWV^LY
cords, damaged or cracked wire insulation and broken plugs are dangerous.
;OL`TH`YLZ\S[PUHZOVJRVYÄYLOHaHYK
Be sure to insert each power cord securely. To prevent hum and noise, do not
bundle the interconnect leads with the power cord or speaker leads.
Cleaning
To clean the unit, wipe its case with a dry, lint-free cloth. Do not use any
JSLHUPUN Å\PKZ JVU[HPUPUN HSJVOVS HTTVUPH VY HIYHZP]LZ +V UV[ ZWYH` HU
aerosol at or near the unit.
Battery disposal
Batteries may contain substances harmful to the environment. Please dispose
of any discharged batteries with due consideration and in accordance with
local environmental/electronic recycling guidelines.
Loudspeakers
Before making any connections to loudspeakers, make sure all power is
[\YULKVɈHUKVUS`\ZLZ\P[HISLPU[LYJVUULJ[Z
Servicing
These units are not user serviceable. Never attempt to repair, disassemble or
reconstruct the unit if there seems to be a problem. A serious electric shock
could result if this precautionary measure is ignored. In the event of a problem
or failure, please contact your dealer.
Cambridge Audio warrants this product to be free from defects in materials
HUK^VYRTHUZOPWZ\IQLJ[[V[OL[LYTZZL[MVY[OILSV^*HTIYPKNL(\KPV^PSS
YLWHPYVYYLWSHJLH[*HTIYPKNL(\KPV»ZVW[PVU[OPZWYVK\J[VYHU`KLMLJ[P]L
parts in this product. Warranty periods may vary from country to country. If in
doubt consult your dealer and ensure that you retain proof of purchase.
To obtain warranty service, please contact the Cambridge Audio authorised
dealer from which you purchased this product. If your dealer is not equipped
to perform the repair of your Cambridge Audio product, it can be returned by
your dealer to Cambridge Audio or an authorised Cambridge Audio service
agent. You will need to ship this product in either its original packaging or
WHJRHNPUNHɈVYKPUNHULX\HSKLNYLLVMWYV[LJ[PVU
Proof of purchase in the form of a bill of sale or receipted invoice, which is
evidence that this product is within the warranty period, must be presented to
obtain warranty service.
;OPZ >HYYHU[` PZ PU]HSPK PM H [OL MHJ[VY`HWWSPLK ZLYPHS U\TILY OHZ ILLU
HS[LYLKVYYLTV]LKMYVT[OPZWYVK\J[VYI[OPZWYVK\J[^HZUV[W\YJOHZLK
from a Cambridge Audio authorised dealer. You may call Cambridge Audio or
`V\YSVJHSJV\U[Y`*HTIYPKNL(\KPVKPZ[YPI\[VY[V JVUÄYT[OH[`V\OH]LHU
unaltered serial number and/or you made a purchase from a Cambridge Audio
authorised dealer.
This Warranty does not cover cosmetic damage or damage due to acts of
.VKHJJPKLU[TPZ\ZLHI\ZL ULNSPNLUJL JVTTLYJPHS\ZLVY TVKPÄJH[PVU
of, or to any part of, the product. This Warranty does not cover damage
due to improper operation, maintenance or installation, or attempted repair
by anyone other than Cambridge Audio or a Cambridge Audio dealer, or
authorised service agent which is authorised to do Cambridge Audio warranty
work. Any unauthorised repairs will void this Warranty. This Warranty does not
JV]LYWYVK\J[ZZVSK(:0:VY>0;/(33-(<3;:
9,7(09: 69 9,73(*,4,5;: (: 796=0+,+ <5+,9 ;/0: >(99(5;@
(9,;/,,?*3<:0=,9,4,+@6-;/,*65:<4,9*(4)90+.,(<+06
:/(33 56; ), 30()3, -69 (5@ 05*0+,5;(3 69 *65:,8<,5;0(3
+(4(.,: -69 )9,(*/ 6- (5@ ,?79,:: 69 04730,+ >(99(5;@ 05
;/0: 796+<*; ,?*,7; ;6 ;/, ,?;,5; 796/0)0;,+ )@ 3(> ;/0:
>(99(5;@ 0: ,?*3<:0=, (5+ 05 30,< 6- (33 6;/,9 ,?79,:: (5+
04730,+>(99(5;0,:>/(;:6,=,905*3<+05.)<;56;3040;,+;6
;/,>(99(5;@6-4,9*/(5;()030;@(5+-0;5,::-69(79(*;0*(3
7<976:,
:VTL JV\U[YPLZ HUK <: Z[H[LZ KV UV[ HSSV^ [OL L_JS\ZPVU VY SPTP[H[PVU VM
incidental or consequential damages or implied warranties so the above
L_JS\ZPVUZTH`UV[HWWS`[V`V\;OPZ>HYYHU[`NP]LZ`V\ZWLJPÄJSLNHSYPNO[Z
and you may have other statutory rights, which vary from state to state or
country to country.
For any service, in or out of warranty, please contact your dealer.
5
CXA60/80
Front panel controls
1 2 3
4 8
9 10
11
5 6 7
Note: Selected sources and functions are represented by a Blue light. MP3
jack input is represented by an Orange ‘A4’ light. CXA80 has additional
Orange lights for USB and Balanced inputs.
1. Standby/On
:^P[JOLZ[OL\UP[IL[^LLU:[HUKI`TVKLPUKPJH[LKI`KPTWV^LY3,+HUK
6U PUKPJH[LK I` IYPNO[ WV^LY 3,+ :[HUKI` TVKL PZ H SV^ WV^LY TVKL
where the power consumption is less than 0.5 Watts. The unit should be left in
:[HUKI`TVKL^OLUUV[PU\ZL
;OPZWYVK\J[OHZ(7+(\[V7V^LY+V^ULUHISLKHZKLMH\S[(M[LYPUHJ[P]P[`
VM TPU\[LZ [OL WYVK\J[ ^PSS H\[VTH[PJHSS` Z^P[JO [V :[HUKI` :LL [OL
º:L[\WTLU\»ZLJ[PVUMVYM\Y[OLYKL[HPSZ
2. (MP3) input
This source input allows you to connect a portable audio device such as an
47 WSH`LY KPYLJ[S` PU[V [OL MYVU[ VM [OL \UP[ \ZPUN [OL TT Z[LYLVQHJR
(labelled ‘ º
>P[O[OL47QHJRJVUULJ[LK[V[OL*?(WYLZZ[OL(I\[[VU[^PJL[VZLSLJ[
the MP3 input so that the A4 light is Orange. The MP3 input can only be
ZLSLJ[LK^OLUHU47QHJRPZPUZLY[LK
Note: Plugging in a device into the front panel automatically selects the MP3
input, any other input can still be selected once this has been done. As a result
you may, if desired, leave a device permanently plugged into the front panel.
3. Headphones
(SSV^Z MVY [OL JVUULJ[PVU VM Z[LYLV OLHKWOVULZ ^P[O H TT QHJR
plug. Headphones with an impedance of between 8 and 600 ohms are
recommended.
Note: Plugging in headphones will automatically mute the loudspeaker, pre-
out, and sub outputs.
4. Source select buttons (A1-A4)
Push the appropriate input selection button to select the source that you wish
[VSPZ[LU[V0MHU47QHJRPZPUZLY[LKPU[V[OL47PUW\[[OLUWYLZZPUN[OL
A4 button a second time will select the MP3 input and will be represented by
an Orange light.
5. Direct
;OPZJVU[YVSNP]LZ[OLH\KPVZPNUHSHTVYLKPYLJ[WH[O[V[OLWV^LYHTWSPÄLY
Z[HNL VM `V\Y HTWSPÄLY I`WHZZPUN [OL [VUL JVU[YVS JPYJ\P[Z MVY [OL W\YLZ[
possible sound quality. When the light is on, the Direct mode is switched on,
and the tone controls are disabled.
6. Speaker A/B
Press to scroll through the speaker sets connected to the loudspeaker
[LYTPUHSZ VU [OL IHJR WHULS ZWLHRLY ZL[Z ( ) VY ( HUK ) ;OPZ JHU IL
\ZLKMVYSPZ[LUPUN[V HU L_[YHZL[VMSV\KZWLHRLYZ PU HUV[OLYYVVT:LL [OL
‘Connections’ section for further details.
7. Mute
Press to mute or unmute the loudspeakers, pre-out, sub, and the headphone
V\[W\[Z;OLSPNO[^PSSÅHZO[VZOV^[OLV\[W\[ZHYLT\[LK
8. Digital source select buttons (D1-D3 / )
Push the appropriate input selection button to select the source that you wish
to listen to.
Note: <:) ZV\YJL PZ VUS` H]HPSHISL VU [OL *?( HUK ^OLU ZLSLJ[LK ^PSS
IL YLWYLZLU[LK I` HU 6YHUNL SPNO[ 7YLZZPUN [OL )S\L[VV[O<:) I\[[VU
repeatedly will toggle between the two inputs.
9. Balance
;OPZ JVU[YVS HSSV^Z `V\ [V HKQ\Z[ [OL YLSH[P]L V\[W\[ SL]LSZ VM [OL SLM[ HUK
right channels. In the central position the output from each channel is equal.
;OPZJVU[YVSTVKPÄLZ[OLZV\UK[OYV\NO`V\YSV\KZWLHRLYZ[OLWYLV\[[OL
OLHKWOVULV\[W\[ZHUK^PSSHKQ\Z[[OLSL]LSVM[OLZ\IV\[W\[[VTH[JO[OL
overall speaker level change.
10. Bass and Treble
7YLZZ[VYLSLHZLHUKYV[H[L[VHSSV^HKQ\Z[TLU[Z[V[OL[VUHSIHSHUJLVM[OL
sound.
11. Volume
Use to increase/decrease the level of the sound from the outputs of the
HTWSPÄLY;OPZJVU[YVSHɈLJ[Z[OLSL]LSVMHSSV\[W\[Z
6
Rear panel connections
Power AC
Out In
OutIn
USB Audio In D3BT100 D2 D1
LeftRight
Left Right
Power Rating:220–230V AC ~ 50/60Hz
Max Power Consumption: 750W
Ground/Lift
Switch
LiftGnd
S/P DIF
Co-axial In Toslink
Optical In
Toslink
Optical In
(Unbalanced)
(Unbalanced)
(Balanced)
(Balanced)
Right
Right
Left
Left
www.cambridgeaudio.com
CXA80 Integrated Amplifier
Designed & Engineered in UK
Made in China
Pre-out A2 A1A3A4Sub-Out
Control Bus
1
2
3 4 65
7 8 9 10
1. AC power socket
6UJL`V\OH]LJVTWSL[LKHSSJVUULJ[PVUZ[V[OLHTWSPÄLYWS\N[OL(*WV^LY
JHISLPU[VHUHWWYVWYPH[LTHPUZZVJRL[[OLUZ^P[JOVU@V\YHTWSPÄLYPZUV^
ready for use.
2. Loudspeaker terminals
Two sets of loudspeaker terminals are available, A (main loudspeaker
[LYTPUHSZHUK)ZLJVUKHY`SV\KZWLHRLY[LYTPUHSZ)V[OZL[ZVMZWLHRLYZJHU
IL[\YULKVUHUKVɈPUKLWLUKLU[S`*VUULJ[[OL^PYLZMYVT`V\YSLM[JOHUULS
loudspeaker to the Left + & - terminals, and the wires from the right channel
loudspeaker to the Right + & - terminals. In each case, the red terminal is the
positive output and the black terminal is the negative output.
Care should be taken to ensure no stray strands of wire short the speaker
outputs together. Please ensure that the loudspeaker terminals have been
tightened completely to provide a good electrical connection. It is possible for
[OLZV\UKX\HSP[`[VILHɈLJ[LKPM[OLZJYL^[LYTPUHSZHYLSVVZL
3. Sub Out
Connect to the input on an active subwoofer if required.
4. Pre-out
-VY JVUULJ[PVU [V [OL \UIHSHUJLK PUW\[Z VM H WV^LY HTWSPÄLY VY HJ[P]L
subwoofer.
5. Analogue inputs (A2, A3 and A4)
These inputs are suitable for any ‘line level’ source equipment such as CD
players, DAB or FM/AM tuners etc.
Note: These inputs are for analogue audio signals only. They should not be
connected to the digital output of a CD player or any other digital device.
6. A1 inputs
Note: Balanced (XLR) is available on the CXA80 only.
( PUW\[Z MLH[\YL LP[OLY \UIHSHUJLK WOVUV9*( VY IHSHUJLK ?39
connections. The balanced connection is the higher quality option and can
YLQLJ[UVPZLHUKPU[LYMLYLUJLPU[OLJHISL^OLU\ZLK^P[OV[OLYLX\PWTLU[[OH[
supports this function. An XLR connector is wired Pin 1 - Ground; Pin 2 - Hot
PUWOHZL"7PU*VSKWOHZLPU]LY[LK
7. USB interface (CXA80 only)
(<:))[`WLZVJRL[PZÄ[[LK[V[OL*?([VLUHISL[OLWSH`IHJRVMH\KPV
MYVTHWLYZVUHSJVTW\[LYY\UUPUNLP[OLY4PJYVZVM[>PUKV^ZVY(WWSL4HJ6:
?VWLYH[PUNZ`Z[LTZ:VTLI\PSKZVM3PU\_HYLHSZVZ\P[HISL
Note: (S^H`Z \ZL H OPNO X\HSP[` <:) JVUULJ[PVU JHISL JLY[PÄLK HZ <:)
/P:WLLK<:)JHISLJVUULJ[PVUZSVUNLY[OHUTTH`YLZ\S[PUPUJVUZPZ[LU[
audio performance.
Always turn the volume to minimum, switch to another
PUW\[VY[\YU[OL*?(VɈILMVYLWS\NNPUN\UWS\NNPUN
JHISLZ[V[OL<:)PUW\[VY^OPSZ[IVV[PUN\WZO\[[PUN
down your PC/Mac.
Ground/Lift switch
;OL.YV\UK3PM[Z^P[JOLUHISLZ[OL<:)PU[LYMHJLLHY[O[VILKPZJVUULJ[LK
MYVT[OL*?(JOHZZPZLHY[O+PZJVUULJ[PUNSPM[PUN[OLLHY[OJHUIL\ZLM\SPM
LSLJ[YVUPJO\TPZOLHYK[OYV\NO[OLZWLHRLYZ^OLU[OL<:)PUW\[PZZLSLJ[LK
The switch should otherwise be left in the Ground position.
8. Control Bus
RCA sockets used to send and receive power and volume commands from
V[OLY JVUULJ[LK *? :LYPLZ WYVK\J[Z -VY TVYL PUMVYTH[PVU VU [OL *VU[YVS
Bus, see Control Bus section.
9. BT100 (not supplied)
The Cambridge Audio BT100 Bluetooth adaptor should be plugged in here
HKKPUN^PYLSLZZZ[YLHTPUNIS\L[VV[O(+7(=9*7H\KPVJHWHIPSP[`KPYLJ[S`
MYVT TVZ[ WOVULZ [HISL[Z HUK SHW[VWZ :LL [OL º*VUULJ[PVUZ» ZLJ[PVU MVY
further details.
10. Digital inputs (D1, D2 and D3)
;6:3052HUK:7+0-JVH_PHSKPNP[HSPUW\[Z
Coaxial – Use a high quality 75 ohm digital RCA Phono interconnect cable
UV[VULKLZPNULKMVYUVYTHS H\KPV\ZL;OPZPUW\[PZ Z\P[HISLMVY IP[
content up to 192kHz.
;6:3052 Optical ¶<ZLHOPNOX\HSP[`;6:3052ÄIYLVW[PJPU[LYJVUULJ[JHISL
KLZPNULKZWLJPÄJHSS`MVYH\KPV\ZL;OPZPUW\[PZZ\P[HISLMVYIP[JVU[LU[
\W[V R/a;6:3052PZUV[YLJVTTLULKH[ R/aZHTWSPUNYH[LZ
Note: To obtain the best results from your system we recommend using only
high quality Cambridge Audio interconnects. This will ensure that you hear
your system as we designed it. Please ask you dealer for details.
7
CXA60/80
Remote control
The CXA is supplied with a remote control handset that
duplicates the front panel control functions and is also
able to control other CX series products. The supplied
(((IH[[LYPLZT\Z[ILÄ[[LKILMVYL[OLYLTV[LJVU[YVSJHU
be used.
The handset buttons function as described below:
1. Brightness
Alters the brightness of the CXA display lights. There
HYL[^V IYPNO[ULZZSL]LSZHUK HUVW[PVU[V Z^P[JOVɈ[OL
backlight.
5V[L!>OLU[OL*?(KPZWSH`SPNO[ZHYLZLSLJ[LK[VILVɈ
ZLSLJ[PUN HU` VM [OL M\UJ[PVUZ ^PSS IYPLÅ` Z^P[JO VU [OL
lights to show the change.
2. Mute
Press to mute or unmute the loudspeakers, pre-out, sub,
HUK[OLOLHKWOVULV\[W\[Z;OLSPNO[^PSSÅHZOVU[OLMYVU[
of the unit to show the outputs are muted.
3. Standby/On
:^P[JOLZ[OL*?(IL[^LLU6UHUK:[HUKI`TVKL
4. Sources
Used to select the source inputs.
Note: For the CXA80, the A1 button has the double function
of selecting the balanced or unbalanced A1 input, and will
toggle between the two inputs when double pressing. The
47 ZV\YJL JHU VUS` IL ZLSLJ[LK ^OLU [OLYL PZ H QHJR
connected to the input.
5. Volume Up/Down
=VS\TLSL]LSHKQ\Z[TLU[
1
2
4
3
5
5
8
Connections
>OLUKLZPNUPUNV\YHTWSPÄLYZ^LPUJS\KLMLH[\YLZ[OH[HSSV^`V\[VJVUULJ[
your system in various ways. The inclusion of features such as Pre-Out and
:WLHRLY ) JVUULJ[PVUZ TLHU [OH[ `V\ JHU ÅL_PIS` JVUÄN\YL `V\Y Z`Z[LT
depending on your requirements.
Basic connections
;OL KPHNYHT ILSV^ ZOV^Z [OL IHZPJ JVUULJ[PVU VM `V\Y HTWSPÄLY [V H *+
player using the D3 coaxial digital input source and a pair of loudspeakers.
Power AC
O
u
t
In
Ou
t
I
n
US
B Audio In
D
3
BT
100
D
2
D
1
Le
ft
R
ig
h
t
Left Righ
t
P
ower
R
at
i
n
g
:
220–230V A
C
~ 50/60Hz
Max Power
C
onsum
p
tion:
7
50
W
G
round/Lift
S
witc
h
L
ift
G
n
d
S
/P DIF
C
o-axial In To
s
link
Optical In
To
s
link
Optical In
(
Unbalanced)
(Unbalanced
)
(
Balanced)
(
Balanced
)
Rig
ht
Ri
g
ht
Le
f
t
L
e
ft
www.cambridgeaudio.co
m
C
XA80 Integrated Amplifie
r
D
esi
g
ned & En
g
ineered in UK
Made in
C
hina
Pre-out A
2
A1A
3
A4Sub-
O
u
t
C
ontrol Bus
In
O
u
t
I
n
O
ut
M
ains Voltage
S
elector
S
witch
:
100-120V/220-240V AC~50/60H
z
S
/P DIF
C
o-axial
Toslin
k
O
ptica
l
Digital Outputs
Digital Outputs
Di
g
ital
O
utput
s
IR In
IR In
Control Bus
Control Bus
I
R
I
n
C
ontrol Bus
Power A
C
D3
Left Right
S/P DIF
Co-axial In
www.cambridgeaudio.com
CXA80 Integrated Amplifier
Designed & Engineered in UK
Made in China
S/P DIF
Co-axial
Digital Outputs
Digital Outputs
Speaker B connections
;OL:WLHRLY)JVUULJ[PVUZVU[OLIHJRVM[OLHTWSPÄLYHSSV^MVYHZLJVUKZL[
VMZWLHRLYZ[VIL\ZLKPLZWLHRLYZSVJH[LKPUHUV[OLYYVVT;OL:WLHRLY
A/B button on the front panel scrolls through the selection of speaker A only,
speaker B only, and speaker A and B together.
Power A
C
Ou
t
In
Ou
t
I
n
U
S
B Audio I
n
D
3
BT
10
0
D2
D1
Le
ft
R
i
g
ht
L
e
f
t Rig
h
t
Power Ratin
g
:
2
20–230V A
C
~ 50/60Hz
Max Power
C
onsumption: 750
W
Ground/Lift
S
witch
Lif
t
G
nd
S/P DIF
C
o-axial I
n
T
oslink
Optical I
n
T
oslink
Optical In
(
Unbalanced
)
(
Unbalanced
)
(
Balanced
)
(
Balanced
)
R
igh
t
Rig
ht
Le
ft
L
ef
t
www.cambrid
g
eaudio.com
C
XA80 Inte
g
rated Amplifier
D
esigned
&
Engineered in UK
M
ade in China
Pr
e
-
o
u
t
A2 A1A
3
A
4
S
ub-
O
ut
Control Bu
s
LeftRight
Left Right
www.cambridgeaudio.com
CXA80 Integrated Amplifier
Designed & Engineered in UK
Made in China
Preamp Out connections
The Preamp Out sockets are for connecting to the input sockets of a power
HTWSPÄLYVYHJ[P]LZ\I^VVMLY;OLKPHNYHTILSV^ZOV^ZOV^[VJVUULJ[[OL
HTWSPÄLY[VHUHJ[P]LZ\I^VVMLY]PH[OL3PUL0UPUW\[ZVU[OLZ\I^VVMLY
Power A
C
O
ut I
n
O
u
t
I
n
USB Audio I
n
BT10
0
D
2
D1
L
e
ftRi
g
ht
P
ower Rating
:
2
20–230V AC ~ 50/60H
z
Max Power
C
onsum
p
tion:
7
50
W
G
round/Lift
S
witch
Lif
t
G
n
d
To
s
link
O
ptical I
n
To
s
link
O
ptical I
n
(Unbalanced)
(
Unbalanced
)
(Balanced)
(
Balanced
)
Right
Righ
t
Le
f
t
L
ef
t
P
re-out A
2
A1A3A
4
S
ub-Out
C
ontrol Bu
s
D
3
D3
L
eft
Left
Ri
gh
t
Right
S
/P DI
F
S/P DIF
C
o-axial I
n
Co-axial In
w
ww.cambridgeaudio.co
m
www.cambridgeaudio.com
C
XA80 Inte
g
rated Amplifie
r
CXA80 Integrated Amplifier
D
esigned & Engineered in U
K
Designed & Engineered in UK
Made in
C
hin
a
Made in China
www.cambridgeaudio.com
CXA80 Integrated Amplifier
Designed & Engineered in UK
Made in China
www.cambridgeaudio.com
CXA80 Integrated Amplifier
Designed & Engineered in UK
Made in China
Line
In
Pre-out
Balanced audio connections (CXA80 only)
The diagram below shows how to connect the CXA80 to the CXN Network
player using the Balanced Audio inputs via three pin XLR connectors.
The CXA80 can also be connected to non-Cambridge Audio sources with
balanced outputs.
Power AC
O
ut I
n
Ou
t
I
n
US
B Audio In D
3
BT1
00
D
2
D1
L
e
ftRi
gh
t
Le
ft
R
ig
h
t
P
ower Rating
:
22
0
–2
30
V A
C
~ 5
0
/
60
Hz
M
ax Power Consumption: 750
W
G
round/Lift
S
witch
Li
f
t
G
nd
S
/P DI
F
C
o-axial In Toslink
Op
tical In
Toslink
Op
tical In
(
Unbalanced
)
(
Unbalanced
)
(
Balanced
)
(
Balanced
)
Ri
g
h
t
Right
L
e
ft
L
e
ft
www.cambridgeaudio.co
m
C
XA80 Integrated Amplifie
r
Designed & Engineered in UK
M
ade in China
Pr
e
-
o
ut A
2
A
1A
3
A4
S
ub-Out
C
ontrol Bu
s
V
o
l
tage
R
at
i
ng: 100-230V A
C
~ 50/60Hz
R
ated Power Consum
p
tion:
30W
D
1
ToslinkOptical
D2
S
/P DIF Co-axial
Ethernet
Ethernet
ToslinkOptical
S
/P DIF Co-axial
G
round/Lif
t
S
witch
Ri
g
h
t
L
e
f
t
R
i
g
ht
Le
ft
L
i
f
tGnd
Digital Outputs
Digital Outputs
USB Audio In
USB Audio In
Digital Inputs
Digital Inputs
USB
USB
Et
h
ernet
D
i
g
ital Outputs USB Audio In
D
i
g
ital InputsUSB
F
or local media
I
n
O
ut
C
ontrol Bus
Balanced Audio Output
Balanced Audio Output
Balanced Audio Output
Line Output
Line Output
Line Outpu
t
I
R In
Wi-Fi Dongle
F
o
r l
o
c
a
l m
ed
i
a
Wi-Fi Don
g
le
Power A
C
C
XN Network Playe
r
Designed & Engineered in UK
Made in
C
hina
www.cambridgeaudio.com
CXA80 Integrated Amplifier
Designed & Engineered in UK
Made in China
www.cambridgeaudio.com
CXA80 Integrated Amplifier
Designed & Engineered in UK
Made in China
(Balanced)
(Balanced)
Right
Right
Left
Left
A1
Right Left
RightLeft
Balanced Audio Output
Balanced Audio Output
)HSHUJLK JVUULJ[PVUZ PU HU H\KPV Z`Z[LT HYL KLZPNULK [V YLQLJ[ LSLJ[YPJHS
UVPZLMYVTWV^LY ^PYPUNL[JHUK HSZV [OLLɈLJ[ZVMUVPZL J\YYLU[ZÅV^PUN
through ground connections. The basic principle of balanced interconnection
is to get the signal you want by subtraction, using a three-wire connection.
6ULZPNUHS^PYL[OLOV[VYPUWOHZLJHYYPLZ[OLUVYTHSZPNUHS^OPSLV[OLY[OL
JVSKVYWOHZLPU]LY[LKJHYYPLZHUPU]LY[LK]LYZPVU;OLIHSHUJLKPUW\[ZLUZLZ
[OL KPɈLYLUJL IL[^LLU [OL [^V SPULZ [V NP]L [OL ^HU[LK ZPNUHS (U` UVPZL
voltages that appear identically on both lines (these are called common-mode
ZPNUHSZHYLJHUJLSSLKI`[OLZ\I[YHJ[PVU
The CXA80 is designed to work at its highest performance when a balanced
interconnect is used.
Note: To select the balanced input on the CXA80, press the A1 button twice
on the front panel or on the remote control so that the A1 light on the front
panel display lights up Orange. Repeatedly pressing the A1 button will toggle
between balanced and unbalanced inputs.
9
CXA60/80
USB audio connection (CXA80 only)
;OL *?( <:) PUW\[ LUHISLZ [OL WSH`IHJR VM H\KPV ÄSLZ VY Z[YLHTLK
WYVNYHTTLMYVT4PJYVZVM[>PUKV^ZVY(WWSL4HJ6:?WLYZVUHSJVTW\[LYZ
HUKZVTL3PU\_I\PSKZ>OLUJVUULJ[LK]PH<:)[OLWLYZVUHSJVTW\[LY^PSS
PKLU[PM`[OL*?(HZHUH\KPVKL]PJL:WLJPM`PUN[OL*?(PU[OLJVTW\[LY»Z
audio control panel will enable it to play audio data either stored locally on the
computer or streamed to the computer via a network or the internet.
Power A
C
Ou
t
In
O
u
t
I
n
U
S
B Audio I
n
D3
BT
1
00
D2
D1
L
e
f
tRig
ht
Le
ft Right
Power Ratin
g
:
2
2
0
–2
30
V A
C
~ 5
0
/
60
Hz
Max Power Consumption: 750
W
Ground/Lift
Switch
Lif
t
G
nd
S
/P DIF
C
o-axial I
n
T
o
s
link
Optical I
n
T
o
s
link
Optical In
(
Unbalanced
)
(
Unbalanced
)
(
Balanced
)
(
Balanced
)
R
igh
t
Rig
ht
Lef
t
Le
ft
www.cambridgeaudio.com
C
XA80 Integrated Amplifier
D
esigned & Engineered in UK
M
ade in
C
hina
Pr
e
-
o
u
t
A2 A1A
3
A
4
S
ub-
O
ut
Control Bu
s
USB Audio In
Ground/Lift
Switch
LiftGnd
www.cambridgeaudio.com
CXA80 Integrated Amplifier
Designed & Engineered in UK
Made in China
Always turn the volume to minimum, switch to another
PUW\[VY[\YU[OL*?(VɈILMVYLWS\NNPUN\UWS\NNPUN
JHISLZ[V[OL<:)PUW\[VY^OPSZ[IVV[PUN\WZO\[[PUN
down your PC/Mac.
Note: (S^H`Z \ZL H OPNO X\HSP[` <:) JVUULJ[PVU JHISL JLY[PÄLK HZ <:)
/P:WLLK<:)JHISLJVUULJ[PVUZSVUNLY[OHUTTH`YLZ\S[PUPUJVUZPZ[LU[
audio performance.
Advanced USB audio
;OL*?(PZIV[O<:) /P:WLLKHUK <:)-\SSZWLLK <:)WVY[
compatible.
0[ZOV\SKHSZV^VYR^P[O[OLUL^<:)WVY[Z^OLYL[OL7*^PSSZPTWS`[YLH[
[OL*?(HZPMP[^LYLH<:)VYKL]PJL
;OL *?( HSZV Z\WWVY[Z [^V <:) (\KPV WYV[VJVSZ UV[ [OL ZHTL HZ [OL
WVY[[`WLZ[OLTZLS]LZ<:)(\KPV^OPJO^VYRZV]LY<:)WVY[ZHUK
Z\WWVY[Z\W[VIP[ R/aVY<:)(\KPV^OPJOYLX\PYLZH<:)WVY[
HUKJHUZ\WWVY[\W[VIP[ R/a
;OL KLMH\S[ JVUÄN\YH[PVU PZ <:) HUK <:) (\KPV ^OPJO ^VYRZ ^P[O
nearly all common operating systems and computer types without drivers and
supports up to 24-bit/96kHz audio, simply plug in and play.
0U [OPZ JVUÄN\YH[PVU [OL *?( PZ HISL [V ^VYR H[ \W [V IP[ R/a I`
declaring to your computer that it can handle any sample rate from 32kHz
to 96kHz.
However in some Windows/Mac operating system variants the operating
Z`Z[LTP[ZLSMTH`YLZ[YPJ[VYÄ_[OLV\[W\[ZHTWSLYH[LVYYLZHTWSL[OLH\KPV
:LL V\Y VUSPUL N\PKL H[ www.cambridgeaudio.com/USB-Audio VU <:)
Audio for more details on this. With careful choice of playback software and
settings many pitfalls can be avoided.
0U WHY[PJ\SHY V\Y MYLL >PUKV^Z <:) (\KPV KYP]LY H]HPSHISL MYVT V\Y
^LIZP[LZ\WWVY[Z\W[VIP[ R/aH\KPVHUK>(:(70,_JS\ZP]LVY(:06
modes that can give enhanced performance.
<:) TVKL JHU IL ZLSLJ[LK PU [OL :L[\W TLU\ ;V LU[LY [OL :L[\W TLU\
W\[[OL*?(PUZ[HUKI`TVKL^OPSZ[VU:[HUKI`TVKLWYLZZHUKOVSK[OL
:WLHRLY()I\[[VU\U[PS[OL()SPNO[ZÅHZOHS[LYUH[P]LS`HUK[OLZV\YJLZ(
(SPNO[\W:LLILSV^ZV\YJLI\[[VUZMVYZL[\WJVUÄN\YH[PVU!
Note: Button selected is represented by Blue light.
(VU¶7\[Z[OL*?(PU<:)*SHZZTVKL
(VɈ¶7\[Z[OL*?(PU<:)*SHZZTVKL
Notes:
¶;VZH]L[OLZL[\WZL[[PUNZHUKL_P[[OLZL[\WTLU\WYLZZ[OL:WLHRLY()
button.
¶7YLZZPUN[OL:[HUKI`6UI\[[VU^OPSLPU[OLZL[\WTLU\^PSSL_P[[OPZZL[\W
menu and will not save the setup settings.
A brief explanation of your choices are below:
Use with PCs
>P[O [OL *?( Z^P[JOLK [V <:) (\KPV [OPZ PZ [OL KLMH\S[ ZL[[PUN [OL
CXA80 will work with the native Windows XP, Vista, 7, or 8 Audio 1.0 driver (no
ULLK[VSVHKHU`UL^KYP]LYHUKHJJLW[H\KPV\W[VIP[ R/a
>P[O[OL*?(Z^P[JOLK[V<:)(\KPV[OL*?(ULLKZ[OL*HTIYPKNL
(\KPV <:) (\KPV +YP]LY [V IL SVHKLK HUK JHU [OLU HJJLW[ \W [V
IP[ R/aHUKZ\WWVY[(:06HUK>(:(70,_JS\ZP]LPMYLX\PYLK
The driver is available from www.cambridgeaudio.com/USB-Audio. The
*?(YLX\PYLZ[OLKYP]LY]LYZPVU]KV^USVHKMVY<:)(\KPV
Use with Macs
5VL_[YHKYP]LYZHYLYLX\PYLK>P[O[OL*?(Z^P[JOLK[V<:)(\KPV[OL
*?(^PSS^VYR^P[O[OLUH[P]L4HJ6:?3LVWHYKVYHIV]L(\KPV
driver and accept audio up to 24-bit/96kHz.
>P[O[OL*?(Z^P[JOLK[V<:)(\KPV[OL*?(^VYRZ^P[O[OLUH[P]L
4HJ6:?3LVWHYKVYHIV]L(\KPVKYP]LYHUKJHUHJJLW[H\KPV\W
to 24-bit/192kHz.
Use with Linux
-VYTVZ[I\PSKZVM3PU\_^P[O[OL*?(Z^P[JOLK[V<:)(\KPV[OL*?(
will work with the native Audio 1.0 driver and accept audio up to 24-bit/96kHz.
:VTL]LY`UL^I\PSKZVM3PU\_HYLUV^Z\WWVY[PUN<:)(\KPVMVY^OPJO[OL
CXA80 should be switched to Audio 2.0 to accept audio up to 24-bit/192kHz.
For both cases because Linux builds vary according to their creators choice
of software components including drivers it is not possible to guarantee
operation and Audio drivers may need to be loaded.
‘Class drivers’ as they are called for generic support of Audio Class 1.0 or
Audio Class 2.0 devices may be available from the Linux community, we do
not supply these.
Optional BT100 for bluetooth audio streaming (not
supplied)
When connected to your CXA, this adaptor allows the CXA to receive
)S\L[VV[O(\KPVRUV^UHZ)S\L[VV[O(K]HUJLK(\KPV+PZ[YPI\[PVU7YVÄSLVY
(+7*VU[HJ[`V\YKLHSLYMVYKL[HPSZ
;OPZZOV\SKILPUZLY[LKPU[V[OL<:)ZVJRL[THYRLK);HZZOV^UILSV^
VU[OLYLHYWHULS^OPSZ[[OL*?(PZVɈ@V\JHUUV^[\YU[OL*?(VUHUKZLSLJ[
the Bluetooth buttons on the front panel or on the remote control.
Power A
C
O
ut
I
n
O
ut
In
U
S
B Audio In
D
3
B
T10
0
D2
D
1
L
eft
R
i
ght
L
e
f
t
Ri
g
ht
P
ower
R
at
i
n
g
:
2
20–230V A
C
~ 50/60Hz
M
ax Power
C
onsum
p
tion: 750
W
Ground/Lif
t
S
witch
Lif
t
G
nd
S
/P DIF
C
o-axial In
T
o
s
link
Optical I
n
T
o
s
link
O
ptical In
(
Unbalanced
)
(
Unbalanced
)
(
Balanced
)
(
Balanced
)
Righ
t
R
igh
t
Le
ft
Lef
t
www.cambrid
g
eaudio.com
C
XA80 Inte
g
rated Amplifier
D
esigned & Engineered in UK
M
ade in
C
hina
Pr
e
-
o
ut A
2
A1A
3
A
4
S
ub-
O
u
t
Control Bu
s
BT100
www.cambridgeaudio.com
CXA80 Integrated Amplifier
Designed & Engineered in UK
Made in China
10
Setup menu
;VLU[LY [OL:L[\WTLU\W\[[OL*?(PUZ[HUKI`TVKL^OPSZ[VU:[HUKI`
TVKL WYLZZ HUK OVSK [OL :WLHRLY () I\[[VU \U[PS [OL () SPNO[Z ÅHZO
HS[LYUH[P]LS` HUK [OL ZV\YJLZ((SPNO[\W:LLILSV^ZV\YJL I\[[VUZ MVY
ZL[\WJVUÄN\YH[PVU!
Note: Button selected is represented by Blue light.
Auto power down (APD)
(VɈ(VɈ¶+PZHISLZ[OL(7+(\[VWV^LYKV^UM\UJ[PVU
(VU(VɈ¶:L[Z[OL(7+[PTL[VTPU\[LZ
(VɈ(VU¶:L[Z[OL(7+[PTL[VTPU\[LZ
(VU(VU¶:L[Z[OL(7+[PTL[VTPU\[LZ
Note: Auto power down is a power down function that automatically switches
the CXA into standby mode if there is no audio. The APD time represents
the amount of time required for there to be no audio before the CXA is
automatically put into the standby mode.
Clipping function
A3 on – Clipping function enabled. The volume nudges down if signal clipping
is detected.
(VɈ¶*SPWWPUNM\UJ[PVUPZKPZHISLK
USB mode (CXA80 only)
Note: The A4 source button has no setup function on the CXA60.
(VU¶7\[Z[OL*?(PU<:)*SHZZTVKL
(VɈ¶7\[Z[OL*?(PU<:)*SHZZTVKL
Notes:
¶;VZH]L[OLZL[\WZL[[PUNZHUKL_P[[OLZL[\WTLU\WYLZZ[OL:WLHRLY()
button.
¶7YLZZPUN[OL:[HUKI`6UI\[[VU^OPSLPU[OLZL[\WTLU\^PSSL_P[[OPZZL[\W
menu and will not save the setup settings.
Control Bus
The Control Bus allows any compatible Cambridge products to synchronise
^OLUWV^LYPUN\W[OL\UP[Z:LL[OLMVSSV^PUNKPHNYHTZ^OLUJVUULJ[PUN[OL
CXA using the provided Control Bus cable.
Another added feature with this Control Bus is the use of the Cambridge
Connect app. You can use the Cambridge Connect app to control the CXA
via the CXN.
Cambridge Connect app (via CXN)
>OLU\ZPUN[OLHWW[V[\YU[OL*?5VUVɈ[OPZ^PSSHSZV[\YU[OL*?(VUVɈ
The app can also be used to control the volume of the CXA. Connect the CXN
control bus out to CXA in. For more information, see the CXN manual.
P
ower A
C
O
ut
In
Ou
t
I
n
U
S
B Audio In
D3
BT
100
D
2
D
1
L
e
f
tRigh
t
Left Ri
g
h
t
P
ower Rating
:
220–230V A
C
~ 50/60H
z
Max Power Consumption: 750
W
G
round/Lif
t
Switc
h
Lif
t
G
nd
S
/P DIF
C
o-axial I
n
To
s
link
O
ptical I
n
To
s
link
O
ptical I
n
(
Unbalanced
)
(
Unbalanced
)
(
Balanced
)
(
Balanced
)
Rig
ht
Rig
h
t
L
e
ft
L
ef
t
w
ww.cambridgeaudio.com
C
XA80 Inte
g
rated Amplifier
D
esigned & Engineered in U
K
Made in Chin
a
Pr
e
-
o
ut A2 A1A
3
A4
S
ub-
O
ut
Control Bu
s
Volta
g
e Ratin
g
:100-230V A
C
~ 50/60Hz
R
ated Power
C
onsumption:
30W
D
1
ToslinkOptica
l
D
2
S/P DIF Co-axial
Ethernet
Ethernet
T
oslink O
p
ticalS/PDIF Co-axial
G
round/Lift
Switc
h
Righ
t
L
e
ft
Rig
h
t
Le
f
t
L
i
ft
G
nd
Digital Outputs
Digital Outputs
USB Audio In
USB Audio In
Digital Inputs
Digital Inputs
USB
USB
Eth
e
rn
e
tDi
g
ital Output
s
US
B Audio InDi
g
ital Input
s
US
B
F
o
r l
o
c
a
l m
ed
i
a
I
n
O
u
t
C
ontrol Bu
s
Balanced Audio Output
Balanced Audio Output
Balanced Audio Output
Line Output
Line Output
Line Output
I
R
In
Wi-Fi Dongle
F
o
r l
o
c
a
l m
ed
i
a
Wi-Fi Dongle
Power A
C
In
In
www.cambridgeaudio.com
CXA80 Integrated Amplifier
Designed & Engineered in UK
Made in China
Control Bus
Control Bus
Out
CXA with CXC
>OLU[\YUPUN[OL*?(VUVɈ[OPZ^PSSHSZV[\YU[OL*?*VUVɈ*VUULJ[[OL
CXA control bus out to CXC in.
P
ower A
C
O
ut I
n
Ou
t
I
n
U
S
B Audio In
D3
BT
1
00
D
2
D
1
Le
ftRigh
t
Left Righ
t
P
ower Rating
:
22
0
–2
30
V A
C
~ 5
0
/
60
H
z
M
ax Power
C
onsumption: 750
W
Ground/Lif
t
Switc
h
Lif
t
G
nd
S
/P DIF
C
o-axial I
n
To
s
link
O
ptical I
n
To
s
link
O
ptical I
n
(
Unbalanced
)
(
Unbalanced
)
(
Balanced
)
(
Balanced
)
Rig
ht
Rig
ht
Left
L
e
f
t
w
ww.cambridgeaudio.com
CXA80 Integrated Amplifier
D
esigned & Engineered in U
K
Made in Chin
a
Pr
e
-
o
ut A2 A1A3A4
S
ub-
O
ut
Control Bu
s
In
O
ut
In
O
ut
Mains Volta
g
e Selector Switch
:
100-120V/220-240V A
C
~50/60H
z
S/P DIF
C
o-axia
l
Toslink
Optica
l
Digital Outputs
Digital Outputs
D
i
g
ital Output
s
IR In
IR In
Control Bus
Control Bus
IR InControl Bu
s
P
ower A
C
Out
Out
www.cambridgeaudio.com
CXA80 Integrated Amplifier
Designed & Engineered in UK
Made in China
Control Bus
In
In
Control Bus
Control Bus
BT100 controls and connections
B
A
A. Pairing button/Status LED
Button performs pairing and related functionality. Integrated LED indicates
BT100 status.
B. USB plug
:[YLHTZOPNOX\HSP[`<:)H\KPVPU[V`V\Y*?(]PH[OLYLHYKLKPJH[LK);
<:)ZVJRL[
Pairing
To begin streaming high quality music from your chosen media source it will
ÄYZ[ULLK[VILWHPYLK^P[O[OL);
A. Double click the button on the BT100 to enter pairing mode, the BT100
PUKPJH[LZP[PZPU[OLWHPYPUNZ[H[LI`ÅHZOPUNYHWPKS`
B. Put your Bluetooth compliant audio source into pairing mode. Please
consult your manufacturer’s user manual on how to do this.
Pairing your BT100 and source establishes an authorised audio link that can
then be used again in the future without having to go through this stage again.
(M[LYWHPYPUN `V\JHUQ\Z[ZLSLJ[[OL )S\L[VV[OZV\YJLPUW\[HUKWSH`H[ HU`
[PTLHZSVUNHZ`V\Y)S\L[VV[O(+7JVTWH[PISLZV\YJLWOVULSHW[VWL[JPZ
within approx. 10m of the BT100.
Normally on your source you will need to select Bluetooth Pairing and then the
BT100 should appear as ‘Cambridge Audio BT100’ in a list of locally found
Bluetooth devices.
:LSLJ[[OH[P[LTPU[OLSPZ[[VÄUPZOWHPYPUN
*6UZ\JJLZZM\SWHPYPUN[OL);Z3,+NVLZVɈMVYHZLJVUKVY[^V[OLU
[YPWSLÅHZOLZX\PJRS`;OL3,+[OLUNVLZVɈHUKVUS`SPNO[Z\WPU[OLM\[\YL
when you are playing audio via Bluetooth.
D. To play back via a paired Bluetooth device, simply select the BT100 on
that device and start playing, then select Bluetooth in the CXA via the
front panel or remote control. The BT100 LED lights up constantly when
Z[YLHTPUN:)*VYVUHUKÅPJRZVɈL]LY`ZLJVUKZ^OLUZ[YLHTPUNHW[?
Notes:
– You can pair to more than one source up to a maximum of 8 sources at any
[PTL7HPYPUN[VH [OKL]PJL^PSSJH\ZL[OLÄYZ[VUL[VILMVYNV[[LUHUKZV
on. However as you would expect the BT100 can only play back from one
of these sources at a time.
¶>OLU `V\ OH]L ÄUPZOLK WSH`IHJR THU` ZV\YJLZ RLLW [OL )S\L[VV[O
link active for a time unless you actively tell them to stop by deselecting
WSH`IHJR]PH[OL);KVUV[\UWHPYHZ[OPZPZUV[ULJLZZHY`
This can prevent another source to be able to access the BT100.
To immediately use another source, simply deselect the BT100 for playback
VU`V\YÄYZ[ZV\YJLKL]PJLILMVYLZ[HY[PUN\WVUHZLJVUK
¶:VTLKL]PJLZZ[YLHTLTW[`KH[HHSS[OL[PTLL]LU^OLUWH\ZLKVYZ[VWWLK
These devices will cause the BT100s LED to be on even if playback is
currently stopped or paused.
11
CXA60/80
CXA with CXN
Note: Without using the Cambridge Connect app to control the CXA.
>OLU[\YUPUN[OL*?(VUVɈ[OPZ^PSSHSZV[\YU[OL*?5VUVɈ*VUULJ[[OL
CXA control bus out to CXN in.
Power A
C
O
u
t
In
Ou
t
I
n
U
S
B Audio I
n
D3
BT
1
00
D2
D
1
L
e
f
tRig
ht
L
eft Ri
g
h
t
Power Rating
:
22
0
–2
30
V A
C
~ 5
0
/
60
Hz
Max Power
C
onsumption: 750
W
G
round/Lif
t
Switc
h
Lif
t
G
nd
S
/P DIF
C
o-axial I
n
T
o
s
link
O
ptical I
n
T
o
s
link
O
ptical I
n
(
Unbalanced
)
(
Unbalanced
)
(
Balanced
)
(
Balanced
)
R
igh
t
R
ig
ht
L
e
f
t
Lef
t
www.cambrid
g
eaudio.com
C
XA80 Inte
g
rated Amplifier
Designed & Engineered in U
K
Made in Chin
a
Pr
e
-
o
u
t
A2 A1A
3
A4
S
ub-
O
ut
Control Bu
s
V
o
l
ta
g
e
R
at
i
n
g:
100-230V AC ~ 50/60Hz
Rated Power Consumption:
30W
D
1
T
oslink O
p
tical
D
2
S
/P DIF Co-axia
l
Ethernet
Ethernet
ToslinkO
p
tica
l
S
/P DIF Co-axia
l
G
round/Lif
t
S
witch
Ri
g
h
t
L
e
f
t
Rig
ht
Lef
t
L
i
f
tGnd
Digital Outputs
Digital Outputs
USB Audio In
USB Audio In
Digital Inputs
Digital Inputs
USB
USB
E
therne
t
Digital
O
utputs U
S
B Audio In
D
igital InputsU
S
B
For local me
d
i
a
I
n
O
ut
C
ontrol Bus
Balanced Audio Output
Balanced Audio Output
Balanced Audio
O
utpu
t
Line Output
Line Output
L
ine
O
utput
IR In
W
i-
F
i
D
ongle
F
o
r l
o
c
a
l m
ed
i
a
Wi-Fi Don
g
le
Power A
C
Out
Out
www.cambridgeaudio.com
CXA80 Integrated Amplifier
Designed & Engineered in UK
Made in China
Control Bus
In
Control Bus
CXA with CXN and CXC
Using the CXA as the primary power controller, see the diagram below. When
[\YUPUN[OL*?(VUVɈ[OPZ^PSSHSZV[\YU[OL*?5HUK*?*VUVɈ
Power AC
Ou
t
In
O
u
t
I
n
US
B Audio In D
3
BT1
00
D
2
D
1
LeftRigh
t
L
e
f
t
R
ig
h
t
P
ower Rating
:
2
2
0
–2
30
V A
C
~ 5
0
/
60
Hz
Max Power Consum
p
tion: 750
W
G
round/Lif
t
S
witc
h
Lif
t
G
nd
S/P DI
F
Co-axial I
n
T
oslink
Optical I
n
T
oslink
Optical I
n
(
Unbalanced
)
(
Unbalanced
)
(
Balanced
)
(
Balanced
)
R
i
g
ht
R
ig
ht
L
e
f
t
Le
ft
www.cambridgeaudio.com
C
XA80 Inte
g
rated Amplifier
Desi
g
ned & En
g
ineered in U
K
Made in
C
hin
a
P
re-ou
t
A2
A
1
A3
A4
S
ub-
O
ut
C
ontrol Bus
Volta
g
e Ratin
g:
1
00
-2
30
V A
C
~ 5
0
/
60
Hz
Rated Power Consum
p
tion: 30
W
D
1
T
oslink O
p
tical
D
2
S
/P DIF Co-axia
l
Ethernet
Ethernet
ToslinkO
p
tica
l
S
/P DIF Co-axia
l
G
round/Lif
t
S
witch
Ri
g
h
t
L
e
f
t
Rig
ht
Lef
t
L
if
t
Gnd
Digital Outputs
Digital Outputs
USB Audio In
USB Audio In
Digital Inputs
Digital Inputs
USB
USB
E
therne
t
Digital
O
utputs U
S
B Audio In
D
igital InputsU
S
B
For local me
d
i
a
I
n
O
ut
Control Bus
Balanced Audio Output
Balanced Audio Output
Balanced Audio Outpu
t
Line Output
Line Output
L
ine Output
IR In
Wi-Fi Dongle
F
o
r l
o
c
a
l m
ed
i
a
Wi-Fi Don
g
le
Power A
C
In Out
In
O
ut
Mains Voltage Selector Switch:
1
00-120V/220-240V A
C
~50/60H
z
S
/P DI
F
C
o-axia
l
Toslin
k
Optical
Digital Outputs
Digital Outputs
D
i
g
ital Outputs
IR In
IR In
Control Bus
Control Bus
IR InControl Bu
s
Power AC
Out
Out
www.cambridgeaudio.com
CXA80 Integrated Amplifier
Designed & Engineered in UK
Made in China
Control Bus
Control Bus
In
In
Control Bus
Control Bus
In
Out
Out
Adding an additional connection from CXN to CXA will enable the use of the
Cambridge Connect app function.
Power AC
Ou
t
In
O
u
t
I
n
US
B Audio In D
3
BT1
00
D
2
D
1
LeftRigh
t
Le
ft
R
ight
P
ower Ratin
g
:
2
2
0
–2
30
V A
C
~ 5
0
/
60
Hz
Max Power Consum
p
tion: 750
W
G
round/Lif
t
S
witc
h
Lif
t
G
nd
S/P DI
F
C
o-axial I
n
T
oslink
Optical I
n
T
oslink
Optical I
n
(
Unbalanced
)
(
Unbalanced
)
(
Balanced
)
(
Balanced
)
R
ig
ht
R
i
g
h
t
Le
ft
L
e
f
t
www.cambridgeaudio.com
C
XA80 Integrated Amplifier
Designed
&
Engineered in U
K
Made in
C
hin
a
P
re-ou
t
A2
A
1
A3
A4
S
ub-
O
ut
C
ontrol Bus
Volta
g
e Ratin
g:
1
00
-2
30
V A
C
~ 5
0
/
60
Hz
Rated Power Consum
p
tion: 30
W
D1
T
oslink
O
ptical
D2
S/P DIF
C
o-axia
l
Ethernet
Ethernet
ToslinkOptica
l
S/P DIF Co-axia
l
Ground/Lif
t
S
witch
Rig
ht
Lef
t
Rig
ht
Lef
t
L
if
t
Gnd
Digital Outputs
Digital Outputs
USB Audio In
USB Audio In
Digital Inputs
Digital Inputs
USB
USB
E
therne
t
Digital Outputs U
S
B Audio In
D
igital InputsU
S
B
For local me
d
i
a
I
n
O
ut
Control Bu
s
Balanced Audio Output
Balanced Audio Output
Balanced Audio Out
p
u
t
Line Output
Line Output
L
ine Out
p
ut
IR In
Wi-Fi Dongle
F
o
r l
o
c
a
l m
ed
i
a
W
i-
F
i
D
on
g
le
Power AC
In Out
In
O
ut
Mains Volta
g
e Selector Switch:
1
00-120V/220-240V AC~50/60H
z
S/P DI
F
C
o-axia
l
Toslin
k
Optical
Digital Outputs
Digital Outputs
D
igital Outputs
IR In
IR In
Control Bus
Control Bus
I
R
InControl Bu
s
Power AC
Out
Out
www.cambridgeaudio.com
CXA80 Integrated Amplifier
Designed & Engineered in UK
Made in China
Control Bus
Control Bus
In
In
Control Bus
Control Bus
In
Out
Out
In
In
Out
12
CAP5 - Five way protection system
Cambridge Audio has developed a proprietary protection system to ensure
YLSPHIPSP[`HUKHSVUNSPMLMVYP[ZHTWSPÄLYZHUK[OLZWLHRLYZ[OL`HYLJVUULJ[LK
[V;OPZWYV[LJ[PVUZ`Z[LTJVTWYPZLZVMÄ]LTHPUWYV[LJ[PVUTL[OVKZ!
1. DC detection
Indication - <UP[OHZZ^P[JOLKVɈK\YPUNVWLYH[PVU;OL+PYLJ[:WLHRLY()
HUK4\[LSPNO[ÅHZOLZ[VNL[OLYPU[OLMVSSV^PUNZLX\LUJLVULÅHZO^P[OSVUN
WH\ZLIL[^LLUÅHZOLZ9LHKILSV^MVYTVYLPUMVYTH[PVU
Description -*(7VɈLYZSV\KZWLHRLYWYV[LJ[PVUPM[OLV\[W\[VM[OLHTWSPÄLY
NVLZ[VHOPNOJVUZ[HU[]VS[HNL+*ILJH\ZLVMZVTLPU[LYUHSMH\S[;OPZPZH
YHYLMH\S[HS[OV\NOKL[LJ[PUNP[JV\SKQ\Z[ZH]L[OVZLL_WLUZP]LSV\KZWLHRLYZ
Remedy - Due to the necessary sensitivity of the DC protection circuit,
L_[YLTLS` OHYK JSPWWPUN VM [OL HTWSPÄLY TH` JH\ZL +* WYV[LJ[PVU [V IL
triggered. If this fault occurs, please contact your dealer for service.
2. Over temperature detection
Indication - <UP[OHZZ^P[JOLKVɈK\YPUNVWLYH[PVU;OL+PYLJ[:WLHRLY()
HUK4\[LSPNO[ÅHZOLZ[VNL[OLYPU[OLMVSSV^PUNZLX\LUJL[^VX\PJRÅHZOLZ
^P[OSVUNWH\ZLIL[^LLUÅHZOLZ9LHKILSV^MVYTVYLPUMVYTH[PVU
Description - Over temperature is caused by a combination of high listening
levels and low impedance speakers. CAP5 includes temperature detection
which constantly monitors the heat generated by the output transistors. If the
monitored temperature reaches a high level (suitably within the limits of the
V\[W\[KL]PJLZ[OLHTWSPÄLY^PSSH\[VTH[PJHSS`Z^P[JOPU[VHMH\S[TVKL;OL
unit should ideally be left for 15 minutes in this state to cool down adequately.
If the unit has not fully cooled down then the temperature may reach the limit
ZVVUHM[LY[OLHTWSPÄLYPZWV^LYLK\W0M[OLSV\KZWLHRLYPTWLKHUJLPZSV^
[OL [LTWLYH[\YL VM [OL HTWSPÄLY TH` YPZL MHZ[LY HZ [OL HTWSPÄLY PZ ^VYRPUN
OHYKLY 0M [OL HTWSPÄLY PZ TV\U[LK PU H JHIPUL[ VY [OL ]LU[PSH[PVU ZSV[Z HYL
obstructed the over temperature detection may activate/reactivate after a
short listening time.
Remedy - The internal temperature of the output transistors has reached the
over temperature limit. Leave the unit for 15 minutes to cool down before
WYLZZPUN[OL:[HUKI`I\[[VU[VYLZ\TLUVYTHSVWLYH[PVU
3. Overvoltage/overcurrent detection
Indication - <UP[OHZZ^P[JOLKVɈK\YPUNVWLYH[PVU;OL+PYLJ[:WLHRLY()
HUK4\[LSPNO[ÅHZOLZ[VNL[OLYPU[OLMVSSV^PUNZLX\LUJL[OYLLX\PJRÅHZOLZ
^P[OSVUNWH\ZLIL[^LLUÅHZOLZ9LHKILSV^MVYTVYLPUMVYTH[PVU
Description - *(7 VɈLYZ =0 ]VS[HNLJ\YYLU[ WYV[LJ[PVU I` JVUZ[HU[S`
TVUP[VYPUN [OL V\[W\[ [YHUZPZ[VYZ [V RLLW [OLT ^VYRPUN PUZPKL [OLPY :HML
6WLYH[PUN(YLH:6(;OL:6(PZHZL[VMSPTP[ZNP]LUI`[OLV\[W\[[YHUZPZ[VY
manufacturer to ensure reliability. The V/I protection has been incorporated
^P[OPU[OLHTWSPÄLYJPYJ\P[Y`[VWYV]PKLHMHZ[YLZWVUZL[V[LTWVYHY`V]LYSVHK
conditions. When the V/I protection is triggered the unit will continue to
operate but distortion may be heard as the unit protects the output transistors.
Remedy - Reduce the volume. If distortion is still present, check the speaker
connections and ratings.
4. Short circuit detection
Indication - <UP[OHZZ^P[JOLKVɈK\YPUNWV^LY\W;OL+PYLJ[:WLHRLY()
HUK4\[LSPNO[ÅHZOLZ[VNL[OLYPU[OLMVSSV^PUNZLX\LUJLMV\YX\PJRÅHZOLZ
^P[OSVUNWH\ZLIL[^LLUÅHZOLZ9LHKILSV^MVYTVYLPUMVYTH[PVU
Description - +\YPUN WV^LY \W MYVT :[HUKI` *(7 WLYMVYTZ H JOLJR VU
the loudspeaker terminals to see if a short across the terminals has been
accidentally introduced. If the resistance measured across the loudspeaker
[LYTPUHSZPZ[VVSV^[OL\UP[^PSSZ[H`PU:[HUKI`TVKL\U[PS[OLMH\S[OHZILLU
removed and Power up is re-attempted.
Remedy - There may be a short circuit between the loudspeaker terminals.
Check all loudspeaker connections before attempting to switch the unit out
VM:[HUKI`
5. Intelligent clipping detection
Indication - Volume is reduced automatically.
Description -*(7OHZ[OLHIPSP[`[VKL[LJ[^OLU[OLHTWSPÄLYZ[HY[Z[VJSPW
or overdrive at its output, which can damage loudspeakers, and degrade the
sound. Clipping distortion is caused at high volume levels when the output
ZPNUHS H[[LTW[Z [V NV V\[ZPKL [OL TH_PT\T ]VS[HNL [OH[ [OL HTWSPÄLY JHU
WYV]PKLJH\ZPUN[OL[VWZVM[OLZPNUHS[VÅH[[LUVɈ
When CAP5 detects clipping the volume will be automatically reduced down
until CAP5 detects an undistorted output.
Note: The clipping detection is disabled by default. The clipping detection can
ILLUHISLKPU[OL:L[\WTLU\ZLLº:L[\WTLU\»ZLJ[PVU
Troubleshooting
There is no power
Ensure the AC power cord is connected securely.
Ensure the plug is fully inserted into the wall socket and is switched on.
Check fuse in the mains plug or adaptor.
There is no sound
4HRLZ\YL[OL\UP[PZUV[PU:[HUKI`TVKL
Check that source component is properly connected.
Check that your speakers are properly connected.
Make sure the selected speaker A/B light corresponds to the speaker
terminals that the loudspeakers are connected to.
Make sure unit is not in mute mode.
There is no sound on one channel
Ensure that balance control is in the correct position.
Check speaker connections.
Check interconnects.
There is a loud buzz or hum
Check turntable or tone arm for ground and connection lead fault.
Ensure no interconnects are loose or defective.
,UZ\YL[OH[`V\Y[\YU[HISLPZUV[[VVJSVZL[V[OLHTWSPÄLY
7KHUHLVZHDNEDVVRUGLσXVHGVWHUHRLPDJLQJ
Ensure that speakers are not wired out of phase.
'LUHFW6SHDNHU$%DQG0XWHOLJKWñDVKLQJ
:LLZLJ[PVUVU*(7WYV[LJ[PVUZ`Z[LT
The remote handset will not function
Check that the batteries have not expired.
Ensure that nothing is blocking the remote sensor.
-VYTVYLMYLX\LU[S`HZRLKX\LZ[PVUZ-(8»Z[LJOUPJHSHK]PJLHUKPUMVYTH[PVU
VU NL[[PUN [OL TVZ[ V\[ VM `V\Y *?( WSLHZL ]PZP[ [OL :\WWVY[ ZLJ[PVU VU
Cambridge Audio’s website:
www.cambridgeaudio.com/support
For all servicing, in or out of warranty, please contact your dealer.
13
CXA60/80
;LJOUPJHSZWLJPÄJH[PVUZ
CXA80 CXA60
Continuous power output >94:PU[V6OTZ
>94:PU[V6OTZ
>94:PU[V6OTZ
>94:PU[V6OTZ
THD (unweighted) #R/aH[VMYH[LKWV^LY
#/a¶R/aH[VMYH[LKWV^LY
#R/aH[VMYH[LKWV^LY
#/a¶R/aH[VMYH[LKWV^LY
Frequency response #/a¶R/aK) #/a¶R/aK)
S/N ratio (ref 1W into 8 Ohm) >93 dB >93 dB
S/N ratio (ref full power) >105 dB >105 dB
Input sensitivity 0UW\[((\UIHSHUJLKT=94: 0UW\[((\UIHSHUJLKT=94:
Input impedances 0UW\[(IHSHUJLKR6OT
0UW\[((\UIHSHUJLKR6OT
0UW\[((\UIHSHUJLKR6OT
Inputs )HSHUJLK<UIHSHUJLK47QHJR*VH_:7+0-
;6:3052)S\L[VV[O]PH);UV[Z\WWSPLK
<:)(\KPV
<UIHSHUJLK47QHJR*VH_:7+0-;6:3052
)S\L[VV[O]PH);UV[Z\WWSPLK
Outputs :WLHRLYZ/LHKWOVUL7YLHTWSPÄLY6\[W\[:\I
Output
:WLHRLYZ/LHKWOVUL7YLHTWSPÄLY6\[W\[:\I
Output
Power amp damping factor >110 at 1kHz >110 at 1kHz
USB audio input <:);`WL)JVUMVYTPUN[V(\KPVWYVÄSLVY
<:)(\KPVWYVÄSL\ZLYZLSLJ[HISL
N/A
Compatibility <:)!<W[VIP[ R/aHZ`UJOYVUV\Z
<:)!<W[VIP[ R/aHZ`UJOYVUV\Z
;6:3052!IP[ R/a
*VH_:7+0-!IP[ R/a
;6:3052!IP[ R/a
*VH_:7+0-!IP[ R/a
Max power consumption 750W 600W
Standby power consumption #> #>
Bass & Treble controls :OLS]PUN[`WL
Max bass boost/cut +/- 10.5dB at 10Hz
Max treble boost/cut +/- 8dB at 20kHz
:OLS]PUN[`WL
Max bass boost/cut +/- 10.5dB at 10Hz
Max treble boost/cut +/- 8dB at 20kHz
Dimensions __TT_ _¹ __TT_ _¹
Weight RN 3IZ RN3IZ
Cambridge Audio is a brand of Audio Partnership Plc
9LNPZ[LYLK6ɉJL!.HSSLY`*V\Y[/HURL`7SHJL
3VUKVU:,))<UP[LK2PUNKVT
Registered in England No. 2953313
www.cambridge-audio.com
© 2014 Cambridge Audio Ltd
APxxxxx/1
<
This manual suits for next models
1
Table of contents
Other CAMBRIDGE Amplifier manuals
