Camos CM-42A User manual

INSTRUCTION MANUAL
PRINTED IN KOREAver. 1.0* Design and Specifications are subject to change without notice.

INSTRUCTION MANUAL
CM-42A
TILT CAMERA FOR VEHICLES
Thank you for purchasing this product.
For proper usage and application,
please read this instruction manual thoroughly.

2
CONTENT
TILT CAMERA FOR VEHICLES
SAFEGUARD INSTRUCTIONS
FEATURES
BOX CONTENT
INSTALLATION
CONNECTION
CLEANING and GENERAL MAINTENANCE
SPECIFICATIONS
.......................................................... 3
..................................................................................................4
....................................................................................... 4
....................................................................................... 5
........................................................................................ 6
............................... 7
..................................................................................... 8

3
SAFEGUARD INSTRUCTIONS
TILT CAMERA FOR VEHICLES
Please pay attention to the warnings and cautions below in order to prevent potential
risks.
“WARNING” and “CAUTION” symbols are divided according to the different
risk levels.
CAUTION
WARNING
May cause damage or shorten usage time of the pro-
duct if the user ignores the cautions in the safety rules.
May cause bodily harm or even death if the user ignores
the warnings in the safety rules.
WARNING
In case that the power cable cord touches a metal case, cover it with a friction
tape.
- Short circuit or disconnection of wire may cause a re or accident.
Let professional engineers or the sale store install the camera.
- It requires the experience and skills of professional engineers for proper
installation and wiring.
After installing the camera, check if the break lamp, head lamp and wipe work
properly.
The camera has to be installed with DC 12V to the vehicle.
CAUTION
Do not disassemble the device.
- It may cause a re or malfunction of the device.
Do not use bolts or nuts from parts of the vehicle.
- Using bolt or nuts from steering column or break may cause an accident.
Do not install the camera with big distance the vehicle.
- It may harm the pedestrians.
Do not let the extension cable pass through the seat rail. Wire the cables properly.
- It may cause a re or an accident.
Do not install the camera bracket on glass surface.
- Use screws for the installation of the camera bracket.

4
• 1/3”SONY COLOR CCD image sensor
• 6 pcs of IR LEDs for night view
• Built-in microphone
• Built-in heating function
• Waterproof (IP-67)
• Aluminum die-casting housing
• Night vision using the CdS sensor.
• Automaticall tilt camera lens
FEATURE
1TILT CAMERA FOR VEHICLES
Normal Driving
Rear view angle 0 degree
Backing the car
Rear view angle turned to
the floor about 35 degree
BOX CONTENT
2TILT CAMERA FOR VEHICLES
Tilt Camera Sun Visor Camera Bracket
Accessory Pack Extension Cable (70ft) Instruction Manual
CM-112AHT
Instruction Manual

5
INSTALLATION
3TILT CAMERA FOR VEHICLES
1. Determine a position and a direction of installation so that the back area of your
vehicle can be effectively seen on the monitor screen.
2. Fix the camera bracket to the vehicle using the provided adhesive tape and the
tapping screws with the spring washers.
3. Fix the camera between the camera bracket and sun visor by using machine screws.
Adjust the angle of the camera and fasten the screws firmly.
4. Run the cable from the monitor to the camera.
CM-112AHT
Camera Connector
1. CAMERA B+ (DC +12V)
2. HEATING B+ (DC +12V)
3. STAND BY
4. VIDEO OUT
5. AUDIO OUT
6. N.C
7. GND
Fix the camera bracket to the vehicle using
the provided adhesive tape and the tapping
screws with the spring washers.
Fix the camera between the bracket and sun
visor by using machine screws. Adjust the
angle of the camera and fasten the screws
firmly.
Installation example
TAPPING SCREW TH M4x10
SPRING WASHER M4
FLAT WASHER M4
SEM’S MACHINE SCREW M3x7
MACHINE SCREW PHW M3x5
A
B
C

6
CONNECTION
4TILT CAMERA FOR VEHICLES
Tilt Camera
Monitor
(Option)
Insulation
Tape
Extension Cable (70ft)
Before making the connection, disconnect the ground terminal of the car
battery to avoid short circuiting.
Before inserting a plug, the pin specifications need to be checked and the
plug should be firmly inserted to the jack or connector. If it has been insert-
ed in the wrong direction, it may cause malfunction.
After the extension cable has been connected, it needs to be turned in
the right direction as described on the illustration above.

............................................................................................................................. 1
..................................................................................................................................... 9
........................................................................................................................... 1
Adhesive tape
Screws set
Insulation tape
7
CLEANING and GENERAL MAINTENANCE
5TILT CAMERA FOR VEHICLES
Clean the unit with a slightly damp soft cloth. Use a mild household detergent.
Never use strong solvents such as thinner or benzine as they might damage the
finish of the unit.
•
CLEANING
Unplug or power off the device before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
OBJECT and LIQUID ENTRY
Never push objects of any kind into the camera through holes as they may
touch dangerous voltage points or short-out parts that could result in a fire
resulting from an electric shock. Never spill any kind of liquid on the pro-
duct.
SERVICING
Do not attempt to service this system by yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer all ser-
vicing to qualified service personal.
SPECIFICATIONS
6TILT CAMERA FOR VEHICLES
Pick-up device
View of angle
Minimum illumination
Input voltage
Operating temperature
Dimensions
Weight
Accessories
95˚(H) / 70˚(V) / 120˚(D)
0.1 lux
DC 12V / 200mA Max.
-15˚C ~ 65˚C (5˚F ~ 149˚F)
78.4(W) x 52.0(H) x 56.5(D) mm / 3.09(W) x 2.04(H) x 2.22(D) (Camera Only)
0.4kg / 0.88lbs (including bracket and sunvisor)
1/3”250,000 pixels COLOR CCD 1/3”290,000 pixels COLOR CCD
NTSC PAL

8

9