Campania International Condotti Obelisk FT-293 User manual

FT
-
293Condotti ObeliskFountain
Three people are recommended for the installation ofthisfountain!
R
evised
December 6, 2017
PumpKitParts List
PK500 Pump (1)
#10 stopper(1)
#7 Drain stopperw/ wing nut
Approx.12”length of1/2”BlackNon-Kinktubing (1)**
2”length of5/8”cleartubing (1)**
2”length of1/2"CPVCpipe(1)**
Wedges(2)
Hose clamps(2)*
*Hoseclamps maybe used asflow restrictors
**Tubing hasbeen pre-assembled
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewisecomponentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaced
directlyongrassor dirt. Positionthechannel opening at thebaseofeachfountaintoward
theelectrical outlettobeusedsince thepumpcord will bethreadedthrough thisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
FOUNTAININFORMATION:
Thisfountain holdsapproximately25 gallonsof water.
Thisfountain usesanextra-largefountain cover.
(FTNCOV-XLG)
Compatible with#10 Refill Deviseand LEDkit.
(Aspecialstopper isrequiredtousethe refill kit for
thisfountain.)
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
OEMPF525 - 525GPH Pump
16 FTcord length

FT
-
293Condotti ObeliskFountain
Three people are recommended for the installation ofthisfountain!
R
evised
December 6, 2017
Assemble yourfountainon alevel surface capable ofholdingaminimumof1200pounds withanapproximate 4squarefootfootprint.
FT-269H(392lbs)
24”Lx24”Wx15”H
P-713(500lbs)
46”Wx25.25”H
FT-281B (57lbs)
11.5”Lx11.5”Wx9.75”H
FT-281A(175lbs)
10.5”Lx10.5”Wx37”H
FT-281C (3lbs)
6.75”Lx2.25”Wx5.75”H
FT-269I(13 lbs)
8.25”Lx2.5”Wx9”H
1. Place thebase(FT-269H)into position where thefountain will beinstalled,
ensuringthatit is level.
2. Assemblethepump kit
a. Usingahoseclamp, attach the1/2”non-kink tubingto thepump
outlet.
b. NOTE:All pumps come with1 adapter already insertedinto the
pumpand 2 adapters securedto thepower cord.
i. Thisfountainuses themediumadapter provided.
c. Place thestopper around thepump cord about8”fromthepump.
3. Center theurn (P-713)over thebase(FT-269H).
4. Feed thepump cord through theholein theurn (P-713)and thechannelinthe
base(FT-269H).
5. FIRMLY press thestopper into theholeevenly.
a. Note: Usingthehandleofascrewdriverorhammer works best.
6. Place thepump house(FT-281B)over thepump and in thecenter oftheurn
(P-713).
7. Position theobelisk (FT-281A) over thepump house(FT-281B).
8. InserttheCPVCpipeconnected thetubingassemblyinto theCPVCcoupling
protrudingfromthebottomoftheobelisk (FT-281A).
9. Fit thesmall pump housedoor(FT-281C)into thepump house(FT-281B).
10. Fit thelargeaccess door(FT-269I)into thebase(FT-269H).
11. Fill thefountain with water.