CIVIQ Aquafil Hydrobank AQ-HYB3 Configuration guide

Easy Clean Refill Shelf

Aquafil® Hydrobank Triple
Step 1.
Remove the top and bottom panels by unscrewing all M6 screws and M5 screws for the hinges.
Step 2.
Screw a timber support to the wall.This will assist you in resting the Hydrobank unit while you
mark out the holes for the mounting screws. Make sure the timber is level.
See Step 3 for heights of timber.
Pushing tube in before
pulling it out helps to
release tube
Push in collet
to release tube
Tube is secured
in position
Simply push in
tube to attach
Installation Details
top panel
Issued: March 2023
Aquafil® Hydrobank Triple
Step 1.
Remove the top and bottom panels by unscrewing all M6 screws and M5 screws for the hinges.
Step 2.
Screw a timber support to the wall.This will assist you in resting the Hydrobank unit while you
mark out the holes for the mounting screws. Make sure the timber is level.
See Step 3 for heights of timber.
Pushing tube in before
pulling it out helps to
release tube
Push in collet
to release tube
Tube is secured
in position
Simply push in
tube to attach

Step 4.
NOTE: The following is a two-man operation.
to enable drilling of all screw holes.
Step 3.
NOTE: Junior and Senior have different heights
Aquafil® Hydrobank Triple
Issued: March 2023

Step 5.
Step 6.
push top back as shown by the arrows, until unit is upright.
NOTE: For water connection details please see chiller installations for more details
Issued: March 2023

Step 7.
Step 8.
Put the Bottom Panels back on after connection of hoses.
Wcivi Q .com.au Esales@civi Q .com.au P
Public-use Products
top panel
bottom panel.
Issued: March 2023

1
1
A
B
C
D
E
F
Cleaning and Maintenance
Issued: March 2023

Recommendations for Cleaning of
Specific Products
PROBLEM CLEANING AGENT COMMENTS
lines.
lines.
Stubborn stains and
ammonia.
lines.
Issued: March 2023