Canever Audio Olimpico PowerAmp User manual
CanEVER AUDIO®
CanEVER Audio® Olimpico PowerAmp
OPERATING INSTRUCTIONS
Olimpico PowerAmp Technical Description
Copyright CanEVER AUDIO® 2020-2021 page 2
Settings at the Amplifier Unit
ON/OFF Switch
Monitor LED
Driver Tube / 6N6P
Shunt Regulator Tube/6N30P
Driver Tube / 6N6P
RCA Unbalanced Input
XLR Balanced Input
Input Selector Switch (RCA/XLR)
(+) Speaker Binding Post
( -) Speaker Binding Post
Connection to Power Supply
Shunt Regulator Tube/6N30P
Olimpico PowerAmp Technical Description
Copyright CanEVER AUDIO® 2020-2021 page 3
Settings at the Power Supply Unit
EMI Filter Switch
Main Power Switch
Main Fuse –10A 230Vac
IEC Socket–230V/AC
Standby LED
Power ON LED
Connection to Power Amp
Olimpico PowerAmp Technical Description
Copyright CanEVER AUDIO® 2020-2021 page 4
Set-Up Instructions
1) Connect the amplifier unit to the power supply unit by the RED cable coming with the units.
2) Connect the speaker cables to the WBT Cu NextGen 3-way binding posts.
3) Connect the PREAMPLIFIER by the unbalanced RCA INPUTS or by the balanced XLR INPUTS.
Flip the switches at the Olimpico PowerAmp, up if the connection is unbalanced, or down if
balanced. If the switches are not properly set a hum is present at the loudspeakers.
4) Press the MAINS SWITCH positioned at the rear side of the power supply.
The backlight light inside the power switch lights up and the power supply no is in STANDBY.
The LED at the power supply lights up as well.
5) To POWER ON the amplifier unit press the knob at its front panel.
The Olimpico PowerAmp powers-on only if the power supply is already in STANDBY.
When the amplifier unit is ON. the second LED at the Power Supply lights up as well.
6) Inside the power supply is an extra EMI FILTER.
This filter is in use, when the related switch at the back of the power supply is flipped DOWN.
If problems are experienced with the RCD switches installed in the mains of the building, please
read pages 8 and 9 in the chapter “The Power Supply” of the technical description.
Table of contents
Other Canever Amplifier manuals
