CanMore GT-750F User manual

CanMore Bluetooth
GPS Receiver
GT-750F
User Manual
Version 1.0
1

2

TABLE OF CONTENTS
1.Product Introduction ........................................................................................................... 5
1.1 Overview................................................................................................................................................................5
1.2 Features.................................................................................................................................................................5
1.3 Technology Specification........................................................................................................................................6
1.3.1 Physical Dimension……………………………………………………………………………………………………………..6
1.3.2 Product Notification……………………………………………………………………………………………………………..6
1.3.3 Electrical Characteristics…………..…………………………………………………………………………………………..6
1.3.4 Performance……….……………………………………………………………………………………………………………..7
1.3.4.1 GPS……….……………………………………………………………………………………………………………..7
1.3.4.2 Bluetooth...……………………………………………………………………………………………………………..7
1.3.4.3 Battery….………………………………………………………………………………………………………………..8
1.4 Application.............................................................................................................................................................8
2. Before Start........................................................................................................................ 8
2.1 Check the Package Content..................................................................................................................................8
2.2 Power Switch ……………………………………………………………………………………..............................................9
2.3 LED Disay..........................................................................................................................................................10
2.4 Hardware Features.............................................................................................................................................11
2.4.1. Power Switch............................................................................................................................................11
2.4.2. Power Jack...............................................................................................................................................11
3

2.4.3. Bluetooth Status LED (blue) .....................................................................................................................11
2.4.4. GPS Status LED (Green)...........................................................................................................................11
2.4.5. Battery Status LED (Red/Yellow)...............................................................................................................12
2.5. Getting Started..................................................................................................................................................12
2.5.1. STEP 1:Charge the Battery.......................................................................................................................12
2.5.2. STEP 2:Turn on Receiver and Wait for GPS Fix…………………………………………………………………........12
2.5.3. STP3:Connect to Bluetooth-Enabled Devices……………………………………………………………………........13
2.5.4. STEP 4:Connect to your Navigation Software…………………………………………………………...………………………......13
2.6 How to replace Li-ion Battery………………………………………………………………………….................................................13
2.7 How to use Car Charger to charger your handheld device…………………………………………………………………..13
3. Bluetooth Connection........................................................................................................14
3.1 Turn on the Device..............................................................................................................................................14
3.2 Browse Devices...................................................................................................................................................14
3.3 Browse Services……………..................................................................................................................................15
3.4 Application……………………................................................................................................................................16
4

1.Product Introduction
1.1 Overview
zFast Acquisition high-Sensitivity 44 Channel Bluetooth-GPS Receiver.
The GT-750F is a single board of Bluetooth-GPS receiver for customers who require easy system integration and
minimal development risk.
The GT-750F is optimized for good performance and low cost. Its 44 parallel channels and Venus520 search bins
provide short start-up time and fast signal acquisition. Having fast time-to-first-fix and high sensitivity, the GT-750F
offers good navigation performance even in urban canyons.
Satellite-based augmentation systems, such as WAAS and EGNOS, are supported to yield improved accuracy.
The onboard patch antenna provides good signal reception. It provides fast satellite signal acquisition and short startup
time. Acquisition sensitivity of –155dBm and tracking sensitivity of –158dBm offers good navigation performance even
in urban canyons having limited sky view.
1.2 Features
zAcquire and track 44 satellites simultaneously
zVenus520 simultaneous time-frequency search bins
zSignal detection better than -158dBm
zReacquisition sensitivity –155dBm
5

zCold start < 40 seconds at –135dBm
zHot start < 1sec under open sky
z5m CEP accuracy
zSBAS (WAAS, EGNOS) support
zBluetooth version 2.0 compliant
zCompatible with Bluetooth devices with Serial Port Profile (SPP)
zCharger circuitry and battery socket for N3650 Li-ion battery
zMore than 13 hours of operation
zDimension:73x44x21 mm
1.3 Technology Specification
1.3.1 Physical Dimension:
zBluetooth GPS unit Size: 73.0(W) x 44.0(D) x 21.0(H) (mm)
zWeight: 60g
1.3.2 Product Notification
zOperating temperature range -20ºCto+60ºC
zStorage temperature: -30oC to +70oC.
zBattery Storage temperature range-40ºCto+60ºC
zHumidity range up to 95% no condensing
1.3.3 Electrical Characteristics
zInput voltage: + 5.5 ± 0.5VDC.
6

zackup power: 3V For battery socket Li-ION rechargeable battery (1000 mA)
1.3.4 Performance
1.3.4.1 GPS
zReceiverType 44 parallel channel, L1 C/A code
zAccuracy Position 5mCEP
Velocity 0.1m/sec
zStartup Time <1sechotstart
< 40sec cold start
zSignal Reacquisition 1s
zSensitivity -145dBm acquisition
-158dBm tracking
zUpdateRate 1Hz standard
zDynamics 4G (39.2m/sec2)
zOperational Limits Altitude < 18,000m or velocity < 515m/s
(COCOM limit, either may be exceeded but not both)
zProtocol NMEA-0183 V3.01
GPGGA, GPGLL, GPGSA, GPGSV, GPRMC, GPVTG, GPZDA
9600 baud, 8, N, 1
zDatum DefaultWGS-84
User definable
1.3.4.2 Bluetooth
zSPP compatible, version 2.0 compliant
7

zclass-2 operation, 1.17dBm output level Up to 10m of operation
zDetails specifications please refer to appendix D at page 19.
1.3.4.3 Battery
zbattery socket Li-ION rechargeable battery
zCapacity: 740mAh
1.4 Application
zPDAand Cellular Phone Navigation
zNavigation and positioning
zAutomotive Vehicle Tracking
zPersonal Positioning
zSporting and Recreation
2.Before Start
2.1 Check the Package Content
Before you start using GT-750F, please check out if your package includes the following tems. If any item isdamaged or
8

missed, please contact your reseller at once.
zGT-750F Bluetooth GPS receiver
zCarCharger
zUser manual CD
zAC Adapter(optional)
2.2 Power Switch:Push the power switch is on/off
Power switch
On/Off
9

2.3 LED Display
1 2 34
Battery and charger status Bluetooth status GPSstatus
10

1 Yellow LED indicate slow power
2 Red LED indicates power is in charging
3 zFlashing quickly(every onec for 2 second)-Position is fixed.
zFlashing slowly(every onec for 3 second)-device is on but position is not fixed.
zFlashing quickly(every onec for 2 second)-Position is fixed.
4 zFlashing slowly(every onec for 3 second)-device is on but position is not fixed.
2.4 Hardware Features
2.4.1. Power Switch
Power ON/Power OFF
2.4.2. Power Jack
The power jack allows you to connect to either a DC(included) or AC power charger to recharge the internal battery.
2.4.3. Bluetooth Status LED (Blue)
Flashing quickly(every onec for 2 second)-Bluetooth is on and ready to transmit.
Flashing slowly(every onec for 3 second)-Bluetooth are transmiting data.
2.4.4. GPS Status LED (Orange)
11

Flashing quickly(every onec for 2 second)-Position is fixed.
Flashing slowly(every onec for 3 second)-device is on but position is not fixed.
2.4.5.Battery Status LED (Red/Yellow)
None-Battery has adequate power supply.
Yellow-Power is low. Charging immediately is required.
Red-Connected to power charger, charging.
LED off –Battery is fully charged.
2.5.Getting Started
2.5.1. STEP1:Charge the Battery
Before you use GT-750F, the battery must be charged for at least 2 hours. Plug car charger into power jack and
cigar-lighter separately when is in charging, the Red LED will be lighted up. When the battery is fully charged, the
Red LED will be turned off. Un plug car charger from power jack and cigar-lighter separatel.
2.5.2. STEP2:Turn on Receiver and Wait for GPS Fix
If the position has not been fixed yet, the Orange LED will be flashing slowly(every onec for 3 second). If the position
has been fixed, the Orange LED will be flashing slowly(every onec for 3 second). You are ready to connect to your
Bluetooth-enabled mobile device andyou’re your GPS application.
12

2.5.3. STEP3:Connect to Bluetooth-Enabled Devices
From your Bluetooth-enabled handheld device, execute Bluetooth application software to search GT-750F and then
connect it to your device. If the connection between your device and GT-750F is successful, the Blue LED Flashing
slowly(every onec for 3 second)-Bluetooth are transmiting data.
Note:Type in pin code=8888 during configuration.
2.5.4. STEP4:Connect to your Navigation Software
zLoad your GPS mapping or routing software, along with the corresponding maps of the areas that you are
occupyingor plan to travel .
zStart the application. Make sure the application is set for the COM port that your Bluetooth-enabled mobile
devicewilluseforserialcommunication. Now you should be ready to use your GPS application as directed by
the user documentation that came with the software. More configurations may be necessary.
2.6 How to replace Lithium-ionBattery
zOpen the bolt on the bottom cover of GT-750F and take the Li-ion battery out.
zPlace new Li-ion battery into the room of GT-750F
zThe GT-750F Li-ion battery is replaceable and rechargeable.
zThe GT-750F Li-ion battery can last more than 13 hours in continuous operation mode.
2.7 How to use Car Charger to charge your handheld device
zConnect car charger into your adapter connector of GT-750F.
13

zPlug adapter connector into handheld device connector and plug car charger into cigar-lighter.
3. Bluetooth Connection
Please follow below instructions step by step: The pass word is “0000”
3.1 Turn on the Device
Turn the power switch on. The Bluetooth Status LEDs(Blue LED) and GPS Status LED (Orange LED) will
immediately light up. When the Flashing quickly(every onec for 2 second)-Bluetooth is on and ready to
transmit. The Orange LED is flashing quickly(every onec for 2 second),means Position is fixed.
3.2 Browse Device:
zFirstly, you need to find the device with which you want to establish connection.
zOpen “Bluetooth Manager” on your pocket PC.
zClick “New”
zClick “Connect”
zSearch Bluetooth device “Rikaline 6033”
zSelect “Explore a Bluetooth device” ,to find the bluetooth device
zClick”Next” Double click “Rikaline”
14

3.3Browse Services:
zDouble click the device with which you want to establish SPP connection to browse its service
zConnect to SPP Slave Select SPP slave Click “Next” Click “Finish”
zFinish Bluetooth Manager Setup
zTap and Hold “Rikaline: SPP slave”
zClick “Connect”
zFinish Bluetooth setup
15

3.4 Application:
Now you can use any Navigation system through Bluetooth SPP Profile.
16

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that maycause undesired
operation.
You are cautioned that changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.
FCC RF Radiation Exposure Statement:
This Transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.