CANNICE E1 User manual

WIRELESSSPORTS
EARPHONE
forcallsandmusic
E1 INSTRUCTION

Following items are included
Start here
USB cable
Ear hooks
Ear cushions

Product overview
1. Multifunction button
2. Volume - / Track back
3. Volume + / Track forward
4. LED indicator
5. Charge jack
1
2
3
4
5

Charging
Your new earphone has enough power to pair and make a few
calls.It takes 2 hours to fully charge the earphone; while charging,
the battery indicator light is red, the indicator light flashes blue
once charging is complete.
Note: The lifetime of the battery will be significantly reduced if
your earphone is left uncharged for a long period. We recommend
that you recharge your earphone at least once a month.

Pair one phone
1.Make sure the earphone is turned off and within 1 meter of your
phone, press and hold the Multifunction button until the LED
indicator flashes red and blue alternately (About 7 seconds), then
release Multifunction button.
2.Activate on your phone (See below for more details).Bluetooth
Pairing
iPhone
a.On your phone, open the menu.Settings
b.Select . If Bluetooth is off, turn it on. Bluetooth
The iPhone will search for new devices automatically.
Android phone
a.On your phone, open the menu.Settings
b.Select (For old Android phone, is found in the Bluetooth Bluetooth
). If Bluetooth is off, turn it on. Select Wireless & Networks Search for
Devices if your phone does not automatically search for new devices.
Note: When the earphone and phone have been paired once,
they will automatically connect when the earphone is on and
Bluetooth is activated on the phone.

Bluetooth
ON
Se ar ch
E1
Windows Phone 8
a. On your phone, open the menu.Settings
b. Select . If Bluetooth is off, turn it on.Bluetooth
The Phone will search for new devices automatically.

3. Select "E1". If your phone asks, enter 0000 (four zeros) for the
Passcode or accept the connection. The LED indicator stops flashing
red and blue once successfully paired, you hear "Connection successful".
Some phone list an option to "Play through earphone", select to use the
earphones.
Bluetooth
ON
Se arch
E1

Pair another phone
Multipoint technology enables you to pair another phone and take a
call from either.
To pair with another mobile phone, follow the steps for "Pair one
phone". After pairing successfully, restart the earphone to connect
to 2 paired mobile phone automatically.
Blu et oot h
ON
Con nect
E1
ON
Con nect
E1
Bl ue to ot h
Calling switch
When the first phone call rings, press the Multifunction button
once to answer the call, if the seconds call rings at this moment,
you can answer the second phone by double click Multifunction
button, and on hold the first phone call.

Call
Answer a call
Press the Multifunction button or Volume "+" or Volume "-"
once.
Reject a call
Press and hold the Multifunction button for about 2 seconds.
Press the Multifunction button once.
End a call
Reject the new call hold the current call
During the call there is a new call, press the multifunction
button to reject a new call, keeping the active call.
End current call and answer new call
When a new call rings during a call, press the Multifunction
button once to answer new call and end current call
simultaneously.
On hold current call and answer new call
When a new call rings during a call, Double the Multifunction
button to hold current call and answer new call.

Redial the last call
Mute on/off
Double-press the Multifunction button in standby mode. The
mobile phone will redial the last call number.
Press the Volume "-" for about 2 seconds to mute on/off.
Voice dial (Need phone support)
In standby mode Press the Multifunction button about 2
seconds,wait for phone prompt and then tell the phone to
dial the name of a stored contact.
Switch between the earphone and phone
Press the multifunction button for about 2 seconds during a
call, the call will be switched to the mobile phone, redo this
operation again, the call will be switched to the earphone.

Music
Music play / pause
Press Multifunction button once to play / pause music. (Some
phones may require you to start a media player first) .
Track back/forward
Press the Volume "-" for 2 seconds once to skip track backward,
press Volume "+" for 2 seconds once to skip track forward.
Switch Music and Call
When a call rings during a music playing, the music automatically
pauses to allow you to answer or ignore the call. Once the call is
ignored or ends, the music is resumed.
(Need media player support).

Basic operation
Status indicator
Instruction
Power on
Power off
Standby
Incoming call
Pairing
LED status
Stay blue about one second
Stay red about two second
Blink blue once every 5 seconds
Flashes blue quickly
Flashes red and blue alternately
Voice prompts
Power on
Power off
Pairing
/
Toot
Battery low
Battery low Blink red
Charging Stays on red while charging
Stays on blue after fully charged
/
Volume up/down Press the volume"+" to turn volume up
Press the volume"-" to turn volume down
Power on
Power off
Press and hold Multifunction button for about 3 seconds. The
earphone says "power on" and the LED flashes blue once.
Press and hold Multifunction button for about 5 seconds. The
earphone says "power off" and the LED flashes red once.
Tips: When the distance between the earphone and phone is beyond
effective range, earphone disconnects with phone. Earphone will
power off automatically once no active for 10 minutes.

Hard reset
If the earphone cannot be turned on even when fully charged or does
not respond during use, follow the instructions below to reset it.
1.While pressing and holding the multifunction button, connect the
earphoneto your PC’s USB port or a USB power adapter with the
charging cable.
2.Keep pressing and holding the Multifunction button until the
earphone turns on. The earphone is now reset.
Clear paired list
Make sure the earphone is turned off, press and hold the Multifunction
button until the LED indicator flashes red and blue alternately (About 7
seconds), then release Multifunction button. Press volume "+" and
volume "-" button at the same time until LED flashes blue, then LED
flashes red and blue alternately, the paired list was cleared, the
earphone will enter pairing mode after power on next time.
Turn on voice prompts: enter pairing mode: Press the volume "+"
button for 3 seconds, the blue LED lights flash 3 times;
Turn off voice prompts: enter pairing mode: Press the volume"-"
button for 3 seconds, the red LED lights flash 3 times.

Do not use earphone in thunderstorm weather, the earphone may
not work properly in the condition, and increase the risk of being hit
by lightning .
Safety and care
Using earphone at high to moderate volumes for extended periods
of time will result in permanent hearing damage .It is advised you
keep volume levels moderate to low at all times for your safety.
Do not use any corrosive cleaner/oil to clean the earphone.
If the earphone comes in contact with liquids, quickly wipe away .If
submersed in water, do not turn the earphone on until completely dried.
Tips:liquid submersion voids the warranty.
Keep the earphone and packaging out of reach of children .
Do not use while driving a car, cycling, operating machinery, or
performing other activities that require hearing surrounding sounds.
Earphone may not work properly under high temperature or high
humidity conditions.