Cannon Tools NEILSEN CT3270 Operation instructions

Beforeoperatingthisappliance,pleaseensurethatyouread&understandall
theinstructionsthatapplytoit,asfailuretocomplywi ththeseinstructions
mayresultinpersonalinjurytootherpersons,andalsoincreasetheriskof
fire.Pleaseensurethatanyreplacementpartsoraccessoriesusedwiththis
appliancearecorrectlyand/orsecurelyfittedbeforeuse.
Pleaseretaintheseinstructionsforconstantreference.
VERTICAL LOG SPLITTER CT3270
ORIGINAL MANUAL
Cannon Tools Limited
Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.

EC DECLARATION OF CONFORMITY
We CANNON TOOLS LTD
20 Station road, Rowley Regis, West Midlands,B65 0JU.U.K.
Declare that the following machine complies with the appropriate basic safety
and health requirements of the EC Directive based on its design and type, as
brought into circulation by us.
In case of alteration of the machine, not agreed upon by us, this declaration
will lose its validity.
Product description: VERTICAL LOG SPLITTER
Model: CT3270
Applicable EC Directives:
EC Machinery Directive 2006/42/EC
EC Directive of Electromagnetic Compatibility 2014/30/EU
Harmonized standards
EN 609-1, EN 55012
20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.
Mr. Gurcharan Tony Singh Sanghera
Managing Director
CANNON TOOLS LTD
2019-04-23
1

Application Conditions
Unpacking
Contents of Shipping Container
Set up and Preparation for Operation
Delivering Log Splitter to Work Site
Log Splitter Operation
Replacing Hydraulic Oil
Sharpening Wedge
Trouble Shooting
Plumbing Diagram
Parts Schematic
6.5HP OHV engine
Max. Power(kW) 4.8
INTRODUCTION
Your new log splitter will more than satisfy your
expectations. It has been manufactured under
stringent quality standards to meet superior
performance criteria. You will find your new unit
easy and safe to operate, and with proper care,
it will give you many years of dependable service.
Carefully read through this entire
operator’s manual before using
your new log splitter. Take special
care to heed the cautions and
warnings.
Your log splitter has many features that will make
your job faster and easier. Safety, performance,
and dependability have been given to top priority
in the development of this machine, making it
easy to maintain and operate.
The Engine Manufacturer is responsible for all
engine-related issues with regards to
performance, power rating, specifications,
warranty and service. Please refer to the Engine
Manual, packed separately with your unit, for
more information.
ENVIRONMENTAL
Recycle unwanted materials instead of
disposing of them as waste. All tools,
hoses and packaging should be
resorted, taken to the local recycling
center and disposed of in an
environmentally safe way.
The rating plate on your machine may show
symbols. These represent important information
about the product or instructions on its use.
SYMBOLS
2
Read these instructions in full before
using the machine.
TABLE OF CONTENTS
Introduction
Specifications
Symbols
Safety
2
2
2
3
7
7
8
8
10
10
12
12
13
13
14
Specifications
Noise Pressure
Level 88.1dbAunder no load ;
93.0dbAunder full load
Rated Power(kW) 4.1
Bore × Stroke (mm) 68 * 54
Fuel oil tank volume (L) 4
Lube Oil Capacity (L) 0.6
Log length (mm) 610-1050
Log dia.(Max)(mm) 400
Maximum force 8 Ton
Dimension(mm) 740 * 490 * 1170

SAFETY
Understand your machine
General Safety Rules
Read and understand the operator’s manual
and labels affixed to the machine. Learn its
application and limitations as well as the specific
potential hazards peculiar to it.
Be thoroughly familiar with the controls and
their proper operation. Know how to stop the
machine and disengage the controls quickly.
Make sure to read and understand all the
instructions and safety precautions as outlined
in the Engine Manual, packed separately with
your unit. Do not attempt to operate the machine
until you fully understand how to properly operate
and maintain the Engine and how to avoid
accidental injuries and/or property damage.
Work area
Never start or run the engine inside a closed
area. The exhaust fumes are dangerous,
containing carbon monoxide, an odorless and
deadly gas. Operate this unit only in a well
ventilated outdoor area.
Never operate the machine without good visibility
or light.
Never operate the machine on a steep slope.
Personal safety
Do not operate the machine while under the
influence of drugs, alcohol, or any medication
that could affect your ability to use it properly.
3
Keep your work space tidy!
Untidiness may result in accidents.
Do not remove or tamper with any
protection or safety devices.
Wear safety footwear.
Wear safety gloves.
Wear eye protection.
Wear hearing protection.
Do not smoke or have open flames.
Keep bystanders away from the
working area.
Avoid injury from the movement of
the splitting blade.
Do not remove jammed logs with
your hands.
Before starting any repair
maintenance or cleaning, always
disconnect the power.
Dispose of the used oil in an
environment-friendly way.
Do not touch a hot muffler, gear
housing or cylinder.
Caution! Thrown objects.
Always keep hands out of the path
of all moving parts.

Use safety equipment. Any log splitter may
throw foreign objects into the eyes.This can
cause permanent eye damage. Always wear
eye protection. Safety equipment such as a
dust mask, hard hat, or hearing protection used
for appropriate conditions will reduce personal
injuries.
Dress properly. Wear heavy long pants, boots
and gloves. Do not wear loose clothing, short
pants, jewelry of any kind. Secure long hair so
it is above shoulder level. Keep your hair,
clothing and gloves away from moving parts.
Loose clothes, jewelry or long hair can be caught
in moving parts.
Never tamper with safety devices. Check their
proper operation regularly.
Do not use the machine if the engine’s throttle
control does not turn it on or off. Any gasoline
powered machine that can not be controlled
with the engine throttle control is dangerous
and must be replaced.
Stay alert, watch what you are doing and use
common sense when operating the machine.
Do not overreach. Do not operate the
machine while barefoot or when wearing
sandals or similar lightweight footwear. Wear
protective footwear that will protect your feet
and improve your footing on slippery
surfaces.Do not stand on the machine. Keep
proper footing and balance at all times. This
enables better control of the machine in
unexpected situations.
Avoid accidental starting. Be sure the engine’s
throttle control is off before transporting the
machine or performing any maintenance or
service on the unit. Transporting or performing
maintenance or service on a machine with its
throttle control on invites accidents.
Fuel safety
Fuel is highly flammable, and its vapors can
explode if ignited. Take precautions when using
to reduce the chance of serious personal injury.
Never store fuel or machine with fuel in the tank
inside a building where fumes may reach an
spark, open flame, or any other sources of
ignition, such as a water heater, furnace, clothes
dryer and the like. Allow the engine to cool
before storing in any enclosure.
When refilling or draining the fuel tank, use an
approved fuel storage container while in a clean,
well-ventilated outdoor area. Do not smoke, or
allow sparks, open flames or other sources of
ignition near the area while adding fuel or
operating the unit. Never fill fuel tank indoors.
Keep grounded conductive objects, such as
tools, away from exposed, live electrical parts
and connections to avoid sparking or arcing.
These events could ignite fumes or vapors.
Always stop the engine and allow it to cool
before filling the fuel tank. Never remove the
cap of the fuel tank or add fuel while the engine
is running or when the engine is hot. Do not
operate the machine with known leaks in the
fuel system.
pressure in the tank.
Never overfill fuel tank. Fill tank to no more than
12.5mm (1/2”) below the bottom of the filler
neck to provide space for expansion as the heat
of the engine and/or sun cause fuel to expand.
Replace all fuel tank and container caps securely
and wipe up spilled fuel. Never operate the unit
without the fuel cap securely in place.
Avoid creating a source of ignition for spilled
fuel. If fuel is spilled, do not attempt to start the
engine but move the machine away from the
area of spillage and avoid creating any source
of ignition until fuel vapors have dissipated.
Store fuel in containers specifically designed
and approved for this purpose.
Store fuel in a cool, well-ventilated area, safely
away from sparks, open flames or other sources
of ignition.
4
Loosen the fuel tank cap slowly to relieve any

Keep the engine and muffler free of grass,
leaves, excessive grease or carbon build up to
reduce the chance of a fire hazard.
Keep splitting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
Never douse or squirt the unit with water or any
other liquid. Keep handles dry, clean and free
from debris. Clean after each use.
Observe proper disposal laws and regulations
for gas, oil, etc. to protect the environment.
and do not allow persons unfamiliar with the
machine or these instructions to operate it.
Machine is dangerous in the hands of untrained
users.
Machine use and care
Do not force the machine. Use the correct
machine for your application. The correct
machine will do the job better and safer at the
rate for which it was designed.
Do not change the engine governor settings or
over-speed the engine. The governor controls
the maximum safe operating speed of the
engine.
Do not run the engine at a high speed when
you are not splitting.
Do not put hands or feet near moving parts.
Avoid contact with hot fuel, oil, exhaust fumes
and hot surfaces. Do not touch the engine or
muffler. These parts get extremely hot from
operation. They remain hot for a short time after
you turn off the unit. Allow the engine to cool
before doing maintenance or making
adjustments.
If the machine should start to make an unusual
noise or vibration, immediately shut off the
engine, disconnect the spark plug wire, and
check for the cause. Unusual noise or vibration
is generally warning of troubles.
Use only attachments and accessories approved
by the manufacturer. Failure to do so can result
in personal injury.
Maintain the machine. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
machine’s operation. If damaged, have the
machine repaired before use. Many accidents
are caused by poorly maintained equipment.
Never pick up or carry a machine while the
engine is running.
Walk,never run with the machine.
Service
Before cleaning, repair, inspecting, or adjusting,
shut off the engine and make certain all moving
parts have stopped. Always make sure the
engine’s throttle control is in its “STOP” position.
Disconnect the spark plug wire, and keep the
wire away from the plug to prevent accidental
starting.
Have your machine serviced by a qualified repair
personnel using only identical replacement parts.
This will ensure the safety of the machine
maintained.
Specific Safety Rules
5
your log splitter on dry, solid, level ground. Never
operate your log splitter on slippery, wet, muddy,
or icy surfaces. The location you choose should
be free from any tall grass, brush, or other
interferences. There should be plenty of room
for handling, and help the operator stay alert.
Cluttered areas invites injuries. To avoid tripping,
do not leave tools, logs, or other components
laying around the work area. Do not use the log
splitter in wet or damp areas or expose it to
rain.Do not use it in areas where fumes from
paint, solvents or flammable liquids pose a
potential hazard.
Store the machine out of the reach of children
Avoid dangerous condictions.Always operate
Keep your work area clean and well lit.

6
Inspect your log splitter.Check your log splitter
before turning it on. Keep guards in place and
in working order. Form a habit of checking to see
that keys and adjusting wrenches are removed
from tool area before turning it on. Replace
damaged, missing or failed parts before using
it. Make sure all nuts, bolts, screws, hydraulic
fittings, hose clamps, etc. are securely tightened.
Always check the oil level in the hydraulic oil
tank. Never operate your log splitter when it is
in need of repair or in poor mechanical conditions.
Prevent fires.Do not smoke or have open flames
when operating or refilling the log splitter. Never
operate the log splitter near a flame or spark. Oil
is flammable and can be exploded.
Keep bystanders away.Allow only one person to
load and operate the log splitter. Always keep
bystanders, including visitors, children and pets
away from the work area, especially when the
log splitter is under operation. Only the operator
should stand near the machine and only within
the safe operating area prescribed in this manual.
Never use another person to help you with freeing
jammed log. No one under the age of 16 should
be allowed to operate the log splitter. Any
individual under the age of 18 should have the
necessary training, skills to perform the functions
properly and safely and should always be under
the supervision of adults.
Inspect your log.Never attempt to split logs
containing nails, wire or debris. Always make
sure that both ends of the log you are splitting
are cut as square as possible. This will prevent
the log from sliding out of position while under
pressure. Branches must be cut of flush with the
trunk.
Always pay full attention to the movement of the
wedge ram. Never attempt to load your log
splitter while the ram is in motion. Keep hands
out of the way of all moving parts. Never try to
split two logs on top of each other. One of them
may fly up and hit you.
Protect your hands.When the ram of the log
splitter is in the return mode, keep your hands
off the machine – the log splitter is designed to
automatically stop when the cylinder is fully
retracted. Keep your hands away from splits
and cracks which open in the log. They may
close suddenly and crush or amputate your
hands. Do not remove jammed logs with your
hands,if jammed,follow the under mentioned
instruction to remove the log.Stop the motor.
Loosen the log by a downward stroke on the log
with a hammer.
Don't force tool. Don’t use log splitter for a
purpose for which it was not intended. Do not,
under any circumstances, alter your log splitter.
This equipment was designed and engineered
to be used in accordance with the operating
instructions. Altering the equipment, or using
the equipment in such a way as to circumvent
its design capabilities and capacities, could
result in serious or fatal injury and will void the
warranty. Never try to split logs larger than those
indicated in the specifications table. This could
be dangerous and may damage the machine.
Never leave tool running unattended. Don’t leave
tool until it has come to a complete stop.
in use, before making adjustments, changing
parts, cleaning, or working on the log splitter.
Consult technical manual before servicing.
Protect the environment. Take used oil to an
authorized collection point or follow the
stipulations in the country where the log splitter
is used.
Do not discharge into drains, soil or water.
Avoid injury from unexpected accident.Do not
straddle or reach across the splitting area when
operating the log splitter. Never pile logs to be
split in a manner that will cause you to reach
across the log splitter. Only use your hands to
operate the control levers.Never use your foot,
knee, a rope, or any other extension devices.
Disconnect power. Stop the machine when not

At least 2 people are required to unpack the log
splitter package. Take the following steps to put
the Log Splitter on the ground by tipping every
side of the carton by 45 degree. Make sure put
Block (B) to support the Log Splitter package
(A) at the point a little higher than the middle.
The other side of Block (B) shall be against
steady objects, such as a wall. Wedge (C) shall
be arranged under the tipped Log Splitter
Package (A) every step to avoid slipping. Then
remove the carton off the Log Splitter.
This log splitter is designed for operating under
ambient temperatures between +5oC and 40oC
and for installation at altitudes no more than
1000m above M.S.L. The surrounding humidity
should be less than 50% at 40oC. It can be
stored or transported under ambient
temperatures between -25oC and 55oC.
7
Maintain your log splitter with care. Always clean
the unit after each use. Keep the log splitter
clean for best and safest performance. Follow
instructions for lubricating. Inspect all hydraulic
seals, hoses and couplers for leaks prior to use.
Control levers and power switch must be kept
clean, dry and free from oil and grease at all
times.
Make the workshop childproof. When not in
use, lock the unit in the workshop. Store the log
splitter away from children and others not
qualified to use it.
APPLICATION CONDITIONS
UNPACKING
1
2
3
4
5
A
B
C
A
B
C
A
B
C
A
B
C

A. Log Splitter Frame …………..................1 set
B. Control Lever and Guard Assy............ 2 sets
C. Removable Support Table.....................1 pc
D. Owner’s Manual ……….....…..................2 pcs
Pull Spring Pin (A) to remove the Lock Pin (B).
Apply a thin coat of grease to both surfaces of
the Control Lever Guard as illustrated. Insert
the Control Lever and Guard Assy and make
sure the Control Lever End goes into the slot
of Connection Bracket (C). Lock the Control
Lever and GuardAssy, down with the Lock Pin
(B) and Spring Pin (A). Follow the same steps
to install the other Control Lever and Guard
Assy on the other side.
Three installation positions are available for
the Support Table for different splitting length.
At every installation position, Lock Down Hooks
(D) are available. Insert the Support Table in
the selected Brackets (E). Turn the Lock Down
Hooks (D) on both sides by 90 degrees to lock
the Support Table down.
8
A
BC
D
CONTENTS OF THE
SHIPPING CONTAINER SET UPAND PREPARATION
FOR OPERATION
FOR YOUR SAFETY
READ AND UNDERSTAND THE ENTIRE MANUAL
BEFORE OPERATING MACHINE
MODEL NUMBER : C070
SERIAL NUMBER :
Both model number and serial number may be found on the main label .
You should record both of them in a safe place for future use.
Save This Manual for Future Reference
7 TON VERTICAL LOG SPLITTER
Owner’s Manual

Bleed the air out of the hydraulic system before
starting the log splitter.The cover of the hydraulic
oil tank should be loosened by some rotations
until air can go in and out of the oil tank smoothly.
Air flow thru the oil tank filler should be detectable
during the operations.
Before moving the log splitter, make sure the
cover of the oil tank is tightened to avoid oil
leaking from this point.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
Familiarize yourself with the controls and features
of this log splitter in the illustrations.
9
Transport Handle
Ram Travel Adjusting Rod
Split Wedge
Ram
Control Levers Connection Bracket
Top Motor Shield
Oil Tank
Wheels
Base
Oil Tank Cover / Air Bleeder
Table Lock Down Hook
Support Table
Side Bracket for Support Table
Front Bracket for Support Table
Control Lever
Control Lever Guard
Adjustable Log Holder
Log Holder Adjusting Knob
Accelerator Draw Tube

FAILED TO LOOSEN THE OIL
TANK COVER WILL KEEP THE
SEALED AIR IN HYDRAULIC
SYSTEM BEING COMPRESSED
AFTER BEING
DECOMPRESSED. SUCH
CONTINUOUS AIR
COMPRESSION AND
DECOMPRESSION WILL BLOW
OUT THE SEALS OF THE
HYDRAULIC SYSTEM AND
CAUSE PERMANENT DAMAGE
TO THE LOG SPLITTER.
The log splitter is equipped with 2 wheels for
minor moving. To move the log splitter to the
work site, grip the handle (A) to tilt the log
splitter slightly after making sure the oil tank
cover is tightened.
If using a crane, lay hoist sling
around the housing. Never try
to lift the log splitter at the
Handle (A).
Plan your work site. Work safely and save
effort by planning your work beforehand.
Have your logs positioned where they can
be easily reached. Have a site located to
stack the split wood or load it onto a nearby
truck or other carrier.
Prepare the logs for splitting. This splitter
accommodates logs up to 104cm in length.
When cutting up limbs and large sections,
do not cut sections any longer than 100cm.
With 3 support table positions for splitting
for 52cm, 78cm 104cm in length, insert the
support table in a position nearest the log
length, and secure the support table with
the locking hook.
10
DELIVERING LOG
SPLITTER TO WORK SITE
LOG SPLITTER
OPERATION
1.
2.

Turn the motor on, the wedge ram should
rise to the highest position automatically. If
the wedge ram is already at the highest
position when the motor starts, grip both
control levers and lower them, the wedge
ram should start to move downward.
Before initial operation, check to be sure the
two-handed operation is properly functioned
by following steps:
Lower both control levers, splitting wedge
lowers to approx 5cm above the highest
table position.
Release either of the levers, splitting wedge
should remain in the original position.
Release both levers, the ram should rise
to the highest position automatically.
To set wedge ram stroke, take the following
steps:
Before operation, applying a thin coat of
grease to the surfaces of the ram will lengthen
the durability of the ram.
Do not attempt to split green
logs. Dry, seasoned logs will be
split much more easily, and not
be jammed as frequently as
green wood.
While operating under extremely low
temperature, keep the log splitter running
under no load for 15 minutes to preheat the
hydraulic oil.
11
3.
Open theAir Bleed. Loosen the oil tank cover
a few turns whenever the splitter being used.
Retighten this cover when you finish.
4.
5.
6.
7.
(1)
(2)
(3)
8.
Move splitting wedge to the desired position.
The upper position of the ram wedge travel
should be about 3~5cm over the logs to be
split.
(1)
Release a control lever or switch off the
motor.
Release the Setscrew (A) with L key.Raise
Adjusting Rod (B) until Adjusting Rod (B)
is started to be stopped by the spring inside.
Tighten the Setscrew (A).
Release both control levers and start motor.
Check the upper position of the splitting
wedge.
(2)
(3)
(4)
(5)
Grease

This log splitter is equipped with reinforced
splitting wedge whose blade is specially
treated, After long periods of operation, and
when required, sharpen the wedge with a fine-
toothed file removing any burrs or flat spots
on the edge.
The hydraulic system is a closed system with
oil tank, oil pump and control valve. Check oil
level regularly with dipstick. Low oil levels can
damage the oil pump. Oil Level should
measure approx. 1 ~ 2 cm lower than the
upper surface of the oil tank.
The oil should be completely changed once
a year.
l
l
l
l
Stack as you work. This will provide a safer
work area, keeping it uncluttered, and avoid
the danger of tripping, or damaging the
power cord.
Accumulated split wood and
wood chips can create a
hazardous work
environment. Never continue
to work in a cluttered work
area which may cause you
to slip, trip or fall.
Place log onto splitter. Place the log onto
the support table vertically and sitting flat on
the support table. Be sure the wedge and
support table will contact the log squarely
on the ends. Never attempt to split a log at
an angle.
Break log in the direction of its
growing grain. Do not place log
across the log splitter for
splitting. It may be dangerous
and may seriously damage the
machine.
Adjust the Log Holders (A) according to the
diameter of the log to obtain most
comfortable Control Levers angle.
Hold the log with clamping brackets closely
in the control lever guards. Lower levers to
start the splitting. Releasing either lever
stops the motion of the splitting wedge.
Release both handles to return the splitting
wedge to the upper position.
12
9.
10.
11.
REPLACING HYDRAULIC OIL
SHARPENING WEDGE
12.
Make sure moving parts stops and the
engine is stopped.
Make sure that no dirt or debris finds its
way into the oil tank
Collect used oil and responsibly recycle.
Following an oil change, activate the log
splitter a few times without actually splitting.
Following hydraulic oils or equivalent are
recommended for the log splitter’s
hydraulic transmission system:
SHELL Tellus 22
MOBIL DTE 11
ARAL Vitam GF 22
BP Energol HLP-HM 22

13
PROBLEM PROBABLE CAUSE REMEDY SUGGESTED
Engine does not start
Log Splitter does not
work while motor
running
Valve is not opened owing to
the connection parts loosening Check and tighten the parts
Log Splitter works with
abnormal vibration and
noise
Control Levers or Connection
parts bent Repair the bent parts
Low hydraulic oil level Check and refill hydraulic oil
Low hydraulic oil level Check and refill hydraulic oil
Turn the Switch to OFF
Filling engine oil
Turn the Switch to ON
Engine oil is not enough
TROUBLE SHOOTING
PLUMBING DIAGRAM

14
PARTS SCHEMATIC

15
No. Description Qty No. Description Qty
1 Worktable 1 42 Spring washer 8 6
2 Four star knob 1 43 Bolt M8x30 6
3 Circulate stem 2 44 Oil Pump 1
4 handle jam 1 45 Oil going pipe spigot for pump 1
5 Armguard cover 22 2 46 Hose Hoop 4
6 Manipulative handle 2 47 Inner hexangular screw M8x85 2
7 Right log clamp 1 48 Suction hose spigot for pump 1
8 Right armguard hold assembly 1 49 Washer groupware 20 6
9 Star model knob 2 50 High pressure oil pipe 1 1
10 Left log clamp 1 51 High pressure oil pipe 2 1
11 Left armguard hold assembly 1 52 Three passage nut cap M20 1
12 Locknut M8 6 53 Suction Hose 1
13 Washer 8 16 54 Thin nut M16 1
14 Armguard handle pin 2 55 Ajustable lever 1
15 Thin nut M8 2 56 Bolt M6x30 1
16 Bolt M8x40 6 57 Locknut M6 1
17 Clip 2 58 Oil returning hose 1
18 Adjustable plank 1 59 Oil returnning spigot for valve 1
19 Adjustable lever connector 1 60 Pipe connector for valve 2
20 Nut cap M8 1 61 High pressure oil pipe 3 1
21 Tense pole guider 1 62 Valve 1
22 Tense pole 1 63 Locknut M14 2
23 Snap washer -shaft 22 4 64 Wheel 8x1.75 2
24 Short shaft 1 65 Bolt M16x1.5x25 1
25 Inner hexangular screw M6x12 4 66 Snap washer 16 1
26 Snap washer 6 6 67 Locknut M10 6
27 Gasket 6 12 68 Pump cover 1
28 Slip plank adjuster 1 1 69 Machine shelf 1
29 Up slip plank 2 1 70 O-ring 25x3.55 1
30 Up slip plank 3 1 71 Bolt M10x35 6
31 Up slip plank 1 1 72 Oleaginous cover 1
32 Slip plank adjuster 2 1 73 Washer 10 30
33 Up slip plank 4 1 74 Lock handle 6
34 Inner hexangular screw M6x16 6 75 Cylinder 1
35 Armguard hold limitative plank 2 76 Long shaft 1
36 Engine assemble 1 77 Down slip plank 4
37 Shockproof washer 1 78 Knife rest pipe 1
38 Straight key 1 79
39 Bolt M8x6 1 80
40 Shaft connector 1 81
41 Shaft connector seat 1 82
EXPLODED DIAGRAM

CANNON TOOLS LTD
Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K.
Made in China