Canon POWERSHOT ELPH 520HS User manual

CaHOH
%/
_¢&_o% !,, US 500 H5
Cam÷ra User Geide
Before use be sure to read this c including the
orecautions,
This guide will familiarize with how to use the camera
correctly.
Keep the guide handy for future reference,

Beforeuse,makesurethefollowingitemsareincludedinthepackage.
Ifanythingismissing,contactyourcameradealer.
BatteryPackNB=9L BatteryCharger
(with terminal cover) CB-2LB/2LBE
interface Cable Wrist Strap
IFC-400PCU WS-DC11
Getting Started DIGITAL CAMERA Warranty Card
Solution Disk
A memory card is not included (p. 3).
L PDF Manuals
For information about the included software, refer to the ImageBrowser EX
User Guide, in PDF format (p. 26).
(_ Adobe Reader is required to view the PDF manuals.

Thefollowingmemorycards(soldseparately)canbeused,regardlessof
capacity.
microSDmemorycards*
microSDHCmemorycards*mit_ro.,
microSDXCmemorycards*_-
*ConformstoSDspecifications.However,notallmemorycardshavebeenverifiedtowork
withthecamera.
_iwaycon_i bdore_an_i_a_ ei:_oiycai_isa u_por_e_ionoi_e evices........
such as card readers and computers (including the current version of your
operating system).
Take and review some test shots initially to make sure the images were
recorded correctly. Please note that Canon Inc., its subsidiaries and
affiliates, and its distributors are not liable for any consequential damages
arising from any malfunction of a camera or accessory, including memory
cards, that results in the failure of an image to be recorded or to be
recorded in a way that is machine readable.
Images recorded by the camera are intended for personal use. Refrain
from unauthorized recording that infringes on copyright law, and note that
even for personal use, photography may contravene copyright or other
legal rights at some performances or exhibitions, or in some commercial
settings.
The camera warranty is valid only in the area of purchase. In case of
camera problems while abroad, return to the area of purchase before
contacting a Canon Customer Support Help Desk.
Although the LCD monitor is produced under extremely high-precision
manufacturing conditions and more than 99.99% of the pixels meet design
specifications, in rare cases some pixels may be defective or may appear
as red or black dots. This does not indicate camera damage or affect
recorded images.
The LCD monitor may be covered with a thin plastic film for protection
against scratches during shipment. If covered, remove the film before
using the camera.
When the camera is used over an extended period, it may become warm.
This does not indicate damage.

_b ®
@
_ Lens _ Power button
@ Zoom lever ® Mode switch
Shooting: [-_3(telephoto) /[] (wide _ [] (Playback) button
angle) (_) Lamp
Playback: O, (magnify) /_ (index) @ Flash
Shutter button _ Microphone
Indicator @ Speaker
4
(_): Important information you should know
: Notes and tips for expert camera use
(p. xx): Pages with related information (in this example, "xx" represents a
page number)
Instructions in this guide apply to the camera under default settings.
For convenience, all supported memory cards are simply referred to as
"the memory card".
The tabs shown above titles indicate whether the function is used for still
images, movies, or both.
Indicates that the function is used when shooting or
viewing still images.
Indicates that the function is used when shooting or
viewing movies.

Part Names and Conventions in This Guide
_ Battery cover
(_ DC coupler terminal cover
@_Tripod socket
Screen (LCD monitor)
Memory card cover
® Strap mount
(_ HDMITM terminal
® AV OUT (Audio/video output) /
DIGITAL terminal
@ Movie button
[] (Exposure compensation) /Up button
@ _ (Macro) /Left button
@ ,_(Flash) /Right button
@ DISP. (Display) /Down button
@ FUNC./SET button
@ MENU button
In this guide, icons are used to represent the corresponding camera
buttons and switches on which they appear or which they resemble.
The following camera buttons are represented by icons.
A Up button ® on back
,_ Left button @ on back
Right button @ on back
Y Down button @ on back
@ FUNC./SET button @ on back
On-screen text is indicated in brackets.
5

_ Appendix ......................... 193
Troubleshooting ............................ 194
Handling Precautions .................... 197
Contents
On-Screen Messages .................... 198
On-Screen Information .................. 200
Functions and Menu Tables .......... 204
index .............................................. 212

!ii!!iii i!ii
Use camera-determined settings (Auto Mode) ............................. 44
Shooting people well Ag SmoOthSkin
(p. 80) (p. 81) (p. 83)
Matching specific scenes
_ Sc_nes Lo_: ight Under Water FireWorks
(p. 80/ (p. 81) (p. 81) (p. 81)
Applying special effects
Vivid _oiors
(p. 84) (p. 84) (p. 85)
i_!i_i!_,_,,,!_!' ,i!i
Toy Camera Effect Sofi F_us
(p. 86) (p. 87/ (p. 88) (p. 89)
Focus on faces ............................................................... 44, 80, 115
Without using the flash (Flash Off) ............................................... 56
With myself in the shot (Self-Timer) ........................................ 54, 96
Add the shooting date and time (Date Stamp) .............................. 57
Use Face ID .......................................................................... 59, 127
Movie clips and photos together (Movie Digest) ........................... 93

Contents: Basic Operations
N
View images (Playback Mode) ................................................... 126
Automatic playback (Slideshow) ................................................. 136
On a TV ...................................................................................... 175
On a computer .............................................................................. 27
Browse through images quickly .................................................. 130
Erase images .............................................................................. 143
Shoot movies ........................................................................ 44, 101
View movies ............................................................................... 126
Fast-moving subjects, slow-motion playback ............................. 101
Print pictures ............................................................................... 180
Save images to a computer .......................................................... 27

/
Before using the product, please ensure that you read the safety precautions described
below. Always ensure that the product is used correctly.
The safety precautions noted on the following pages are intended to prevent injuries to
yourself and other persons, or damage to the equipment.
Be sure to also check the guides included with any separately sold accessories you
use.
Do not trigger the flash in close proximity to people's eyes.
Exposure to the intense light produced by the flash could damage eyesight. In particular,
remain at least one meter (39 inches) away from infants when using the flash.
Strap: Putting the strap around a child's neck could result in asphyxiation.
Use only recommended power sources.
Do not attempt to disassemble, alter or apply heat to the product.
Avoid dropping or subjecting the product to severe impacts.
To avoid the risk of injury, do not touch the interior of the product if it has been
dropped or otherwise damaged.
Stop using the product immediately if it emits smoke, astrange smell, or
otherwise behaves abnormally.
Do not use organic solvents such as alcohol, benzine, or thinner to clean the
product.
Do not let the product come into contact with water (e.g. sea water) or other
liquids.
Do not allow liquids or foreign objects to enter the camera.
This could result in electrical shock or fire.
If liquids or foreign objects come into contact with the camera interior, immediately turn
the camera off and remove the battery.
If the battery charger becomes wet, unplug it from the outlet and consult your camera
distributor or a Canon Customer Support Help Desk.
Use only the recommended battery.
Do not place the battery near or in direct flame.
Unplug the power cord periodically, and using adry cloth, wipe away any dust
and dirt that has collected on the plug, the exterior of the power outlet, and the
surrounding area.
Do not handle the power cord with wet hands.
Do not use the equipment in amanner that exceeds the rated capacity of the
electrical outlet or wiring accessories. Do not use if the power cord or plug are
damaged, or not fully plugged into the outlet.
Do not allow dirt or metal objects (such as pins or keys) to contact the terminals
or plug.
The battery may explode or leak, resulting in electrical shock or fire. This could cause
injury and damage the surroundings. In the event that a battery leaks and the battery
electrolyte contacts eyes, mouth, skin or clothing, immediately flush with water.
10

Safety Precautions
Turn the camera off in places where camera use is prohibited.
The electromagnetic waves emitted by the camera may interfere with the operation of
electronic instruments and other devices Exercise adequate caution when using the
camera in places where use of electronic devices is restricted, such as inside airplanes
and medical facilities
CD-ROMs.
It is possibte to suffer hearing lossfrom listening with headphones to the loud sounds of
a CD-ROM played on all audio CD player (music player). Additionally, this could damage
the speakers.
When holding the camera by the strap, be careful not to bang it, subject it to
strong impacts or shocks, or let it get caught on other objects.
Be careful not to bump or push strongly on the lens.
This could lead to injury or damage the camera
If the screen cracks, injury may result from the broken fragments.
This could result in burns or damage to the flash.
Places subject to strong sunlight
Places subject to temperatures above 40 °C(104 °F)
Humid or dusty areas
These could cause leakage, overheating or an explosion of the battery, resulting in
electrical shock, fire, burns or other injuries.
High temperatures may cause deformation of the camera or battery charger casing.
_ i_ _ _s_;_ _ d_i_ds_ .................................
discomfort.
Do not aim the camera at bright light sources (such as the sun on a clear day).
Doing so may damage the image sensor
dust or sand to enter the camera.
This may cause the product to malfunction.
11

Safety Precautions
in regular use, small amounts of smoke may be emitted from the flash.
This is due to the high intensity of the flash burning dust and foreign materials stuck to the
front of the unit. Please use a cotton swab to remove dirt, dust or other foreign matter from
the flash to prevent heat build-up and damage to the unit.
Remove and store the battery when you are not using the camera.
If the battery is left inside the camera, damage caused by leakage may occur.
Before you discard the battery, cover the terminals with tape or other insulators.
Contacting other metal materials may lead to fire or explosions.
when you are not using it.
Do not place anything, such as cloth, on top of the battery charger while it is
charging.
Leaving the unit plugged in for a long period of time may cause it to overheat and distort,
resulting in fire.
Pets biting the battery could cause leakage, overheating or explosion, resulting in fire or
damage.
5; n;t ;ii downwiihth; _am;rainyourp;ck;tl.....................................................
Doing so may cause malfunctions or damage the screen.
When putting the camera in your bag, ensure that hard objects do not come into
contact with the screen.
Do not attach any hard objects to the camera.
Doing so may cause malfunctions or damage the screen.
12

Prepare for shooting as follows.
SA_ttachin_g the Strap
Thread the end of the strap through the strap
hole ((_)), and then pull the other end of the
strap through the loop on the threaded end
(®).
l, Ho|ding the Camera
Place the strap around your wrist.
When shooting, keep your arms close to your
body and hold the camera securely to
prevent it from moving. Do not rest your
fingers on the flash.
13

Initial Preparations
/Charging the Battery
Before use, charge the battery with the included charger. Be sure to charge
the battery initially, because the camera is not sold with the battery charged.
Remove the cover.
insert the battery.
After aligning the A marks on the battery and
charger, insert the battery by pushing it in
(_-_) and down ((_)).
Charge the battery.
For CB=2LB: Flip out the plug ((_)) and plug
the charger into a power outlet ((_)).
For CB=2LBE: Plug the power cord into the
charger, then plug the other end into a power
outlet.
The charging lamp turns orange and
charging begins.
When the charging is finished, the lamp turns
green.
:; Remove the battery.
After unplugging the battery charger, remove
the battery by pushing it in ((_) and up ((_)).
14

Initial Preparations
To protect the battery and keep it in optimal condition, do not charge
it continuously for more than 24 hours.
For battery chargers that use a power cord, do not attach the charger
to other objects. Make sure that it can always move freely.
::F o icJe iaii s'o n'c ha igin g time a i:1d it_e nLirab er o ho :_sa n e c ord ii_g ti;:_e ........................
possible with a fully charged battery, see "Specifications" in the Getting Started
guide.
,inserting the Battery
Insert the included battery.
..................................................................................................................................................................Open the cover.
Slide the cover ((_) and open it ((_)).
Terminals Batter _Lock
insert the battery.
While pressing the battery lock in the
direction of the arrow, insert the battery
facing as shown and push it in until it clicks
into the locked position.
Batteries inserted facing the wrong way
cannot be locked into the correct position.
Always confirm that the battery is facing the
right way and locks when inserted.
Close the cover.
Lower the cover ((_) and hold it down as you
slide it until it clicks into the closed position
(_)).
15

Initial Preparations
Insert a memory card (sold separately).
Note that before using a new memory card (or a memory card formatted in
another device), you should format the memory card with this camera
(p. 164).
.... _ Open the cover.
Slide the cover ((_) and open it ((_).
\ I
insert the memory card.
Insert the memory card facing as shown until
it clicks into the locked position.
Make sure the memory card is facing the right
way when you insert it. Inserting memory
cards facing the wrong way may damage the
camera.
Close the cover.
Lower the cover ((_) and hold it down as you
slide it until it clicks into the closed position
(®).
Removing the Battery
_ Open the cover and press the battery lock in
the direction of the arrow.
The battery will pop up.
16

Initial Preparations
Removing the Memory Card
......... Open the cover and push the memory card in
until it clicks, and then slowly release the
memory card.
The memory card will pop up.
L/j Setting the Date and Time
A screen for setting the date and time is displayed the first time you turn the
camera on. Be sure to specify the date and time, which is the basis for dates
and times added to your images.
Turn the camera on.
Press the power button.
)) _ The [Date/Time] screen is displayed.
Set the date and time.
Press the _t_ buttons to choose an option.
Press the Av buttons to specify the date
and time.
When finished, press the @ button.
............................
17

Initial Preparations
Set the local time zone.
Press the 4)' buttons to choose your local
time zone.
Finish the setup process.
Press the @ button when finished. After a
confirmation message, the setting screen is
.............................._CJf:_: no longer displayed.
_ 'l To turn off the camera, press the power
14_' button.
_ Unless you set the date, time, and local time zone, the [Date/Time]
screen will be displayed each time you turn the camera on. Specify
the correct information.
choose "+" by pressing the Av buttons.
18

InRial Preparations
Changing the Date and Time
Adjust the date and time as follows.
Access the camera menu.
Press the MENUbutton.
Choose [Date/Time].
Move the zoom lever to choose the ?T tab.
Press the Av buttons to choose [Date/
Time], and then press the @ button.
Change the date and time.
Follow step 2 on p. 17 to adjust the settings.
Press the MENUbutton to close the menu.
6___{ii_e__tiing _a,__e {_ii_ _;_b_ _ca___ L=iit:ii_.............
date/time battery (backup battery) after the battery pack is removed.
The date/time battery will be charged in about 4 hours once you insert a charged
battery or connect the camera to an AC adapter kit (sold separately, p. 173),
even if the camera is left off.
Once the date/time battery is depleted, the [Date/Time] screen will be displayed
when you turn the camera on. Follow the steps on p. 17 to setthe date and time.
19

Initial Preparations
The display language can be changed as needed.
Enter Playback mode.
Press the [] button.
Access the setting screen.
Press and hold the @ button, and then
immediately press the MENUbutton,
Set the display language.
Press the A'_ buttons to choose a
language, and then press the @ button.
Once the display language has been set, the
setting screen is no longer displayed.
_, A clock icon isdisplayed ifyou wait too long in step 2 after pressing the @ button
before you press the M ENU button. In this case, press the @ button to dismiss
the clock icon and repeat step 2.
You can also change the display language by pressing the MENU button and
choosing [Language@'_] on the tl _tab.
2O

....ii_i_i_i_iiiiiiiiii!!i_ii_ii_il_!!!!ii!i:i!:_i_i_i_iiiiiiiiiiiiiiii!i_i_i_i_iiiii_ii:__i_i_i_!:_i_!iiiilii_iliiiiiii!i!ili!i_i!i_i_i_!_ii_!_:_iiliilii!i!i_i__i__ii_ii_ii_iliiiiiIiiiiiiilli!iiiliiiI_
Follow these instructions to turn the camera on, shoot still images or movies,
and then view them.
j/_'Shooting (Smart Auto)
For fully automatic selection of the optimal settings for specific scenes, simply
let the camera determine the subject and shooting conditions.
Turn the camera on.
Press the power button.
The startup screen is displayed.
Enter _ mode.
Set the mode switch to _).
Aim the camera at the subject. As the camera
determines the scene, it will make a slight
clicking noise.
Icons representing the scene and image
stabilization mode are displayed in the upper
right of the screen.
Frames displayed around any subjects that
are detected indicate that they are in focus.
E$3
i _:_ _L_¸¸_¸¸¸ -_ _ i
Compose the shot.
To zoom in and enlarge the subject, move the
zoom lever toward E_] (telephoto), and to
zoom away from the subject, move it toward
[] (wide angle).
21