Canon PowerShot G1 X User manual

Getting Started
CEL-SS6DA2M0 © CANON INC. 2012
Getting Started
Handbuch Erste Schritte
Guide de mise en route
Guía de inicio
Guida introduttiva
Introductiehandleiding
Guia de Iniciação
Startvejledning
Starthandbok
Aloitusopas
Příručka Začínáme
Kezdeti lépések
Pierwsze kroki
Úvodná príručka
Alustamine
Darba uzsākšana
Parengimo darbui instrukcija
Βασικές Οδηγίες Χρήσης
PL
EN
DE
FR
ES
IT
NL
PT
FI
CS
HU
SK
ET
LV
SV
DA
LT
EL

2
Before use, make sure the following items are included in the package.
If anything is missing, contact your camera dealer.
A memory card is not included.
The following memory cards (sold separately) can be used, regardless of
capacity. For details on the number of shots and recording time per memory
card, refer to “Specifications” in the Camera User Guide.
•SD memory cards*
•SDHC memory cards*
•SDXC memory cards*
•Eye-Fi cards
* Conforms to SD specifications. However, not all memory cards have been verified to
work with the camera.
About Eye-Fi Cards
This product is not guaranteed to support Eye-Fi card functions (including
wireless transfer). In case of an issue with an Eye-Fi card, please check with
the card manufacturer.
Also note that an approval is required to use Eye-Fi cards in many countries
or regions. Without approval, use of the card is not permitted. If it is unclear
whether the card has been approved for use in the area, please check with
the card manufacturer.
Package Contents
Compatible Memory Cards
Camera Battery Pack
NB-10L (with
terminal cover)
Battery Charger
CB-2LC/CB-2LCE
Interface Cable
IFC-400PCU
Neck Strap
NS-DC9*1
Warranty
System Booklet
Getting Started
(This Guide)
DIGITAL
CAMERA
Manuals Disk*2
DIGITAL
CAMERA
Solution Disk*3
*1 For attachment instructions, refer to the Camera User Guide in the DIGITAL
CAMERA Manuals Disk.
*2 Contains the Camera User Guide, Software Guide (p. 8) and Digital Photo
Professional Instruction Manual.
*3 Contains software used with the camera. For installation instructions, refer to the
Camera User Guide, and for instructions on use, refer to the Software Guide.
Lens Cap
(with cord)

3
Remove the cover and insert the
battery.
After aligning the omarks on the battery and
charger, insert the battery by pushing it in
( ) and down ( ).
Charge the battery.
Once you connect the power cord to the
charger and plug the cord into a power outlet,
the lamp will light up orange.
When charging is finished, the lamp turns
green. Remove the battery.
For details on charging time and the number
of shots or recording time available with a
fully charged battery, refer to “Specifications”
in the Camera User Guide.
Open the cover.
Slide the switch ( ) and open the cover
().
Initial Preparations
Charging the Battery
Inserting the Battery and Memory Card
EC308_GS_EN.fm Page 3 Tuesday, December 20, 2011 2:18 PM

Initial Preparations
4
Insert the battery.
While pressing the battery lock in the
direction of the arrow, insert the battery
facing as shown and push it in until it clicks
into the locked position.
To remove the battery, press the battery lock
in the direction of the arrow.
Check the card’s write-protect tab
and insert the memory card.
Recording is not possible on memory cards
with a write-protect tab when the tab is in the
locked (downward) position. Slide the tab up
until it clicks into the unlocked position.
Insert the memory card facing as shown until
it clicks into the locked position.
To remove the memory card, push it in until
you feel a click, and then slowly release it.
Close the cover.
Lower the cover in the direction of the arrow
and press it until it clicks into the closed
position.
Open the screen ( ) and rotate it toward the
lens 180° ( ).
Close the screen in this orientation ( ).
Battery LockTerminals
Label
Using the Screen
EC308_GS_EN.fm Page 4 Tuesday, December 20, 2011 2:18 PM

Initial Preparations
5
Turn the camera on.
Press the ON/OFF button.
The [Date/Time] screen is displayed.
Set the date and time.
Press the qr buttons to choose an option.
Press the op buttons or turn the 7dial to
specify the date and time.
When finished, press the mbutton.
Set the local time zone.
Press the qr buttons or turn the 7dial to
choose your local time zone.
Press the mbutton when finished. After a
confirmation message, the setting screen is
no longer displayed.
To turn off the camera, press the ON/OFF
button.
Setting the Date and Time
EC308_GS_EN.fm Page 5 Tuesday, December 20, 2011 2:18 PM

Initial Preparations
6
To adjust the date and time once you have set it, do the following.
Press the nbutton.
Move the zoom lever to choose the 3tab.
Press the op buttons or turn the 7dial to choose [Date/Time], and then
press the mbutton.
Follow step 2 again to complete the setting.
Press the nbutton.
Enter Playback mode.
Press the 1button.
Access the setting screen and
choose a language.
Press and hold the mbutton, and then
immediately press the nbutton.
Press the opqr buttons or turn the 7dial
to choose a language, and then press the m
button.
Changing the Date and Time
Display Language
EC308_GS_EN.fm Page 6 Tuesday, December 20, 2011 2:18 PM

7
Turn the camera on and enter A
mode.
Press the ON/OFF button.
Set the mode dial to A.
Compose the shot.
To zoom in and enlarge the subject, move the
zoom lever toward i(telephoto) as you
watch the screen, and to zoom away from the
subject, move it toward j(wide angle).
Shoot still images.
Press the shutter button lightly ( ).
The camera beeps twice after focusing, and
AF frames are displayed to indicate image
areas in focus. Press the shutter button all
the way down ( ).
Shoot movies.
Press the movie button to start shooting, and
press it again to stop.
Enter Playback mode.
Press the 1button.
Browse through your images.
To view the previous or next image, press the
qr buttons or turn the 7dial.
Movies are identified by a icon. To play
movies, go to step 3.
Trying the Camera Out
Shooting
Viewing
EC308_GS_EN.fm Page 7 Tuesday, December 20, 2011 2:18 PM

Viewing the Manuals
8
Play movies.
Press the mbutton to access the movie
control panel, choose (either press the
qr buttons or turn the 7dial), and then
press the mbutton again.
To adjust the volume, press the op buttons.
Playback now begins, and after the movie is
finished, is displayed.
To erase the image you chose in step 2, do the following. Note that erased
images cannot be recovered.
Press the abutton.
After [Erase?] is displayed, press the qr buttons or turn the 7dial to
choose [Erase], and then press the mbutton.
Refer to the manuals on the included DIGITAL CAMERA Manuals Disk for a
more in-depth understanding of the camera, or when using software on the
DIGITAL CAMERA Solution Disk. Adobe Reader is required to view the PDF
manuals. Microsoft Word/Word Viewer can be installed to view the Word
manuals (required only for manuals for the Middle East).
Insert the DIGITAL CAMERA Manuals Disk
in the computer’s CD-ROM drive.
Follow the instructions displayed to view the
manual.
Erasing the Images
Viewing the Manuals
Camera User Guide
Explains how to use all functions of this camera, lists product
specifications, and explains procedures for installing the
included software.
Software Guide Instructions for the included software
EC308_GS_EN.fm Page 8 Tuesday, December 20, 2011 2:18 PM

CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT
TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.
European Union (and EEA) only.
These symbols indicate that this product is not to be disposed
of with your household waste, according to the WEEE
Directive (2002/96/EC), the Battery Directive (2006/66/EC)
and/or your national laws implementing those Directives.
If a chemical symbol is printed beneath the symbol shown
above, in accordance with the Battery Directive, this indicates
that a heavy metal (Hg = Mercury, Cd = Cadmium, Pb = Lead)
is present in this battery or accumulator at a concentration above an applicable
threshold specified in the Battery Directive.
This product should be handed over to a designated collection point, e.g., on an
authorized one-for-one basis when you buy a new similar product or to an authorized
collection site for recycling waste electrical and electronic equipment (EEE) and
batteries and accumulators. Improper handling of this type of waste could have a
possible impact on the environment and human health due to potentially hazardous
substances that are generally associated with EEE.
Your cooperation in the correct disposal of this product will contribute to the effective
usage of natural resources.
For more information about the recycling of this product, please contact your local city
office, waste authority, approved scheme or your household waste disposal service or
visit www.canon-europe.com/environment.
(EEA: Norway, Iceland and Liechtenstein)
© CANON INC. 2012 PRINTED IN THE EU
CANON INC.
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
CANON EUROPA N.V.
Bovenkerkerweg 59-61, 1185 XB Amstelveen, The Netherlands
EC308_GS_EN.fm Page 9 Tuesday, December 20, 2011 2:18 PM

2
Überprüfen Sie, ob die folgenden Teile im Lieferumfang enthalten sind.
Wenden Sie sich an den Kamera-Händler, falls etwas fehlen sollte.
Eine Speicherkarte ist nicht im Lieferumfang enthalten.
Die folgenden Speicherkarten (separat erhältlich) können unabhängig von der
Kapazität verwendet werden. Einzelheiten zur Anzahl der Aufnahmen und zur
Aufnahmedauer pro Speicherkarte finden Sie unter „Technische Daten“ im
Kamera-Benutzerhandbuch.
•SD-Speicherkarten*
•SDHC-Speicherkarten*
•SDXC-Speicherkarten*
•Eye-Fi-Karten
* Entspricht den SD-Spezifikationen. Die Kompatibilität aller Speicherkarten mit der
Kamera kann jedoch nicht garantiert werden.
Informationen zu Eye-Fi-Karten
Zu diesem Produkt wird nicht garantiert, dass die Funktionen der Eye-Fi-Karte
(einschließlich drahtloser Übertragung) unterstützt werden. Wenn Sie
ein Problem mit der Eye-Fi-Karte haben, wenden Sie sich bitte an
den Kartenhersteller.
Bitte beachten Sie auch, dass zur Verwendung einer Eye-Fi-Karte in
bestimmten Ländern oder Regionen eventuell eine Zulassung notwendig ist.
Ohne Zulassung ist die Verwendung nicht gestattet. Bei Unklarheiten, ob die
Karte zur Verwendung in bestimmten Ländern / Regionen zugelassen ist,
informieren Sie sich bitte beim Kartenhersteller.
Lieferumfang
Kompatible Speicherkarten
Kamera Akku NB-10L
(mit Kontakt-
abdekkung)
Akkuladegerät
CB-2LC/CB-2LCE
Schnittstellen-
kabel
IFC-400PCU
Trageriemen
NS-DC9*1
Canon-
Garantie-
broschüre
Handbuch
Erste Schritte
(Dieses Handbuch)
CD-ROM DIGITAL
CAMERA
Manuals Disk*2
CD-ROM DIGITAL
CAMERA
Solution Disk*3
*1 Anweisungen zur Befestigung finden Sie im Kamera-Benutzerhandbuch auf der
CD-ROM DIGITAL CAMERA Manuals Disk.
*2 Enthält das Kamera-Benutzerhandbuch, das Software-Handbuch (S. 8) und die
Digital Photo Professional Bedienungsanleitung.
*3 Enthält die mit der Kamera verwendete Software. Anweisungen zur Installation
finden Sie im Kamera-Benutzerhandbuch und Anweisungen zur Verwendung
im Software-Handbuch.
Objektiv-
deckel
(mit Schnur)
EC308_GS_DE.fm Page 2 Wednesday, December 7, 2011 11:58 AM