Canon PowerShot SX500 IS User manual

Getting Started
Handbuch Erste Schritte
Guide de mise en route
Guía de inicio
Guida introduttiva
Introductiehandleiding
Guia de Iniciação
Startvejledning
Starthandbok
Aloitusopas
Příručka Začínáme
Kezdeti lépések
Pierwsze kroki
Úvodná príručka
Alustamine
Darba uzsākšana
Parengimo darbui instrukcija
Βασικές Οδηγίες Χρήσης
CEL-ST3AA2M0 © CANON INC. 2012
EN
DE
FR
ES
IT
NL
PT
DA
SV
FI
CS
HU
PL
SK
ET
LV
LT
EL
Getting Started

2
Package Contents
Before use, make sure the following items are included in the package.
If anything is missing, contact your camera dealer.
Camera
Battery Pack NB-6L
(with terminal cover)
Battery Charger
CB-2LY/CB-2LYE
Interface Cable
IFC-400PCU
Neck Strap
NS-DC11*1
Lens Cap
(with cord)
Getting Started
(this guide)
DIGITAL
CAMERA
Manuals Disk*2
DIGITAL
CAMERA
Solution Disk*3
Warranty
System
Booklet
*1 For attachment instructions, refer to the Camera User Guide on the DIGITAL
CAMERA Manuals Disk.
*2 Contains manuals (=
3).
*3 Contains software. For installation instructions, refer to the Camera User Guide, and
for instructions on use, refer to the Software Guide.
Compatible Memory Cards
No memory card is included. Purchase one of the following kinds of card
as needed. These memory cards can be used, regardless of capacity. For
details on the number of shots and recording time per memory card, refer to
“Specications” in the Camera User Guide.
• SD memory cards* • SDXC memory cards*
• SDHC memory cards* • Eye-Fi cards
* Conforms to SD specications. However, not all memory cards have been veried to
work with the camera.
About Eye-Fi Cards
This product is not guaranteed to support Eye-Fi card functions (including
wireless transfer). In case of an issue with an Eye-Fi card, please check
with the card manufacturer.
Also note that an approval is required to use Eye-Fi cards in many countries
or regions. Without approval, use of the card is not permitted. If it is unclear
whether the card has been approved for use in the area, please check with
the card manufacturer.

3
Viewing the Manuals
The following manuals are provided on the included DIGITAL CAMERA
Manuals Disk. Adobe Reader is required to view the PDF manuals.
Camera User Guide
This guide covers the following topics.
 Camera basics, from getting ready to shooting, playback, installing the
included software, and importing images
 Other instructions, about all camera features
Software Guide
This guide describes how to use the included software.
 Insert the DIGITAL CAMERA Manuals
Disk in the computer’s CD-ROM drive.
 Follow the instructions displayed to view
the manual.
Initial Preparations
Charging the Battery
1Remove the battery cover and
insert the battery in the charger.
 Remove the cover from the battery, align
the marks on the battery and charger,
and insert the battery by pushing it in ( )
and down ( ).
2Charge the battery.
 Once you connect the power cord to the
charger and plug the cord into a power
outlet, the lamp will light up orange.
 When charging is nished, the lamp turns
green. Remove the battery.

4
Initial Preparations
 For details on charging time and the
number of shots or recording time
available with a fully charged battery,
refer to “Specications” in the Camera
User Guide.
Inserting the Battery and Memory Card
1Open the cover.
 Slide the cover ( ) and open it ( ).
Terminals Battery
Lock
2Insert the battery.
 While pressing the battery lock in the
direction of the arrow, insert the battery
as shown and push it in until it clicks into
the locked position.
 To remove the battery, press the battery
lock in the direction of the arrow.
Label
3Check the card’s write-protect
tab and insert the memory card.
 Recording is not possible on memory
cards with a write-protect tab when the
tab is in the locked (downward) position.
Slide the tab up until it clicks into the
unlocked position.
 Insert the memory card facing as shown
until it clicks into the locked position.
 To remove the memory card, push it in
until you feel a click, and then slowly
release it.

5
Initial Preparations
4Close the cover.
 Lower the cover ( ) and hold it down as
you slide it, until it clicks into the closed
position ( ).
Setting the Date and Time
1Turn the camera on.
 Press the ON/OFF button.
 The [Date/Time] screen is displayed.
2Set the date and time.
 Press the <q><r> buttons to choose an
option.
 Press the <o><p> buttons or turn the
<5> dial to specify the date and time.
 When nished, press the <m> button.
3Set the home time zone.
 Press the <q><r> buttons or turn the
<5> dial to choose your home time
zone.
 Press the <m> button when nished.
After a conrmation message, the setting
screen is no longer displayed.
 To turn off the camera, press the ON/OFF
button.

6
Initial Preparations
Changing the Date and Time
To adjust the date and time once you have set it, do the following.
1Press the <n> button.
2Move the zoom lever to choose the [3] tab.
3Press the <o><p> buttons or turn the <5> dial to choose [Date/Time],
and then press the <m> button.
4 Follow step 2 in “Setting the Date and Time” to adjust the settings.
5Press the <n> button.
Display Language
The display language can be changed as needed.
1Enter Playback mode.
 Press the <1> button.
2Access the setting screen.
 Press and hold the <m> button, and
then immediately press the <n>
button.
 Press the <o><p><q><r> buttons or
turn the <5> dial to choose a language,
and then press the <m> button.

7
Trying the Camera Out
Shooting
For fully automatic selection of the optimal settings for specic scenes,
simply let the camera determine the subject and shooting conditions.
1Turn the camera on and enter
<A> mode.
 Press the ON/OFF button.
 Set the mode dial to <A>.
2Compose the shot.
 To zoom in and enlarge the subject, move
the zoom lever toward <i> (telephoto)
as you watch the screen, and to zoom
away from the subject, move it toward
<j> (wide angle).
3Shoot still images.
 Press the shutter button lightly ( ).
 The camera beeps twice after focusing,
and AF frames are displayed to indicate
image areas in focus. Press the shutter
button all the way down ( ).
Shoot movies.
 Press the movie button to start shooting,
and press it again to stop.

8
Trying the Camera Out
Viewing
1Enter Playback mode.
 Press the <1> button.
2Browse through your images.
 To view the previous or next image, press
the <q><r> buttons or turn the <5>
dial.
 Movies are identied by a [ ] icon. To
play movies, go to step 3.
3Play movies.
 Press the <m> button to access the
movie control panel, choose [ ] (either
press the <q><r> buttons or turn the
<5> dial), and then press the <m>
button again.
 To adjust the volume, press the < o >< p >
buttons.
 Playback now begins, and after the movie
is nished, [ ] is displayed.
Erasing the Images
To erase the image you chose in step 2, do the following. Note that erased
images cannot be recovered.
1Press the <a> button.
2After [Erase?] is displayed, press the <q><r> buttons or turn the <5>
dial to choose [Erase], and then press the <m> button.

9
European Union (and EEA) only.
These symbols indicate that this product is not to be disposed
of with your household waste, according to the WEEE
Directive (2002/96/EC), the Battery Directive (2006/66/EC)
and/or your national laws implementing those Directives.
If a chemical symbol is printed beneath the symbol shown
above, in accordance with the Battery Directive, this indicates
that a heavy metal (Hg = Mercury, Cd = Cadmium, Pb =
Lead) is present in this battery or accumulator at a concentration above an applicable
threshold specied in the Battery Directive.
This product should be handed over to a designated collection point, e.g., on an
authorized one-for-one basis when you buy a new similar product or to an authorized
collection site for recycling waste electrical and electronic equipment (EEE) and
batteries and accumulators. Improper handling of this type of waste could have a
possible impact on the environment and human health due to potentially hazardous
substances that are generally associated with EEE.
Your cooperation in the correct disposal of this product will contribute to the effective
usage of natural resources.
For more information about the recycling of this product, please contact your local city
ofce, waste authority, approved scheme or your household waste disposal service or
visit www.canon-europe.com/environment.
(EEA: Norway, Iceland and Liechtenstein)
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT
TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.
CANON INC.
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
CANON EUROPA N.V.
Bovenkerkerweg 59-61, 1185 XB Amstelveen, The Netherlands
© CANON INC. 2012 PRINTED IN THE EU

2
Lieferumfang
Überprüfen Sie, ob die folgenden Teile im Lieferumfang enthalten sind.
Wenden Sie sich an den Kamera-Händler, falls etwas fehlen sollte.
Kamera
Akku NB-6L
(mit Kontakt-
abdeckung)
Akkuladegerät
CB-2LY/CB-2LYE
Schnittstellen-
kabel
IFC-400PCU
Trageriemen
NS-DC11*1
Objektivdeckel
(mit Schnur)
Handbuch
Erste Schritte
(Dieses Handbuch)
CD-ROM
DIGITAL
CAMERA
Manuals Disk*2
CD-ROM
DIGITAL
CAMERA
Solution Disk*3
Canon-
Garantie-
broschüre
*1 Anweisungen zur Befestigung nden Sie im Kamera-Benutzerhandbuch auf der
CD-ROM DIGITAL CAMERA Manuals Disk.
*2 Enthält Handbücher (=
3).
*3 Enthält Software. Anweisungen zur Installation nden Sie im Kamera-
Benutzerhandbuch und Anweisungen zur Verwendung im Software-Handbuch.
Kompatible Speicherkarten
Eine Speicherkarte ist im Lieferumfang nicht enthalten. Erwerben Sie
je nach Bedarf einen der folgenden Kartentypen. Diese Speicherkarten
können unabhängig von der Kapazität verwendet werden. Einzelheiten
zur Anzahl der Aufnahmen und zur Aufnahmedauer pro Speicherkarte
nden Sie unter „Technische Daten“ im Kamera-Benutzerhandbuch.
• SD-Speicherkarten* • SDXC-Speicherkarten*
• SDHC-Speicherkarten* • Eye-Fi-Karten
* Entspricht den SD-Spezikationen. Die Kompatibilität aller Speicherkarten mit der
Kamera kann jedoch nicht garantiert werden.
Informationen zu Eye-Fi-Karten
Zu diesem Produkt wird nicht garantiert, dass die Funktionen der Eye-Fi-
Karte (einschließlich drahtloser Übertragung) unterstützt werden. Wenn
Sie ein Problem mit der Eye-Fi-Karte haben, wenden Sie sich bitte an
den Kartenhersteller.
Bitte beachten Sie auch, dass zur Verwendung einer Eye-Fi-Karte in
bestimmten Ländern oder Regionen eventuell eine Zulassung notwendig
ist. Ohne Zulassung ist die Verwendung nicht gestattet. Bei Unklarheiten,
ob die Karte zur Verwendung in bestimmten Ländern/Regionen zugelassen
ist, informieren Sie sich bitte beim Kartenhersteller.