Car and Driver INTELLIDASH PRO S User manual

User Manual
Manual de Usuario
INTELLIDASH PRO S
DU2000

Table of Contents
READ ME..........................................................................................2
PACKAGE LIST.................................................................................3
PRODUCT OVERVIEW..................................................................4
SET-UP MOUNT & POWER ON.................................................5
IMPORTANT NOTES.....................................................................8
HOME SCREEN...............................................................................9
APPLE CARPLAY...........................................................................10
ANDROID AUTO .........................................................................14
iOS MIRROR...................................................................................17
ANDROID LINK.............................................................................18
BLUETOOTH PHONE...................................................................19
BLUETOOTH MUSIC...................................................................20
USB MEDIA.....................................................................................21
FM TRANSMITTER......................................................................22
BUILT-IN SPEAKER.......................................................................23
SETTINGS.......................................................................................24
TROUBLESHOOT FIRMWARE..................................................25
SUMMIT ELECTRONICS LLC ONE YEAR LIMITED
WARRANTY...................................................................................27
ENGLISH

Read Me
Important Safety Instructions
Read these instructions, keep these instructions, heed all warnings, follow
all instructions.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for Help.
The device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC NOTICE TO USERS:
FCC ID: 2AMSOCAD-DU2000
Caution: Changes or modifications not expressly approved by the Party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection Against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications, however there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment o ffand on, the user is encouraged to try to correct
the interference by one or more of the following:
1) Do not use this apparatus near water.
2) Clean only with a dry cloth.
3) Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
4) Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
5) Protect the power cord from being walked on or pinched, ensure that the
power cord does not get tangled with the gas or break peddles.
6) Only use attachments/accessories specified by the manufacturer.
7) Unplug this apparatus during lightning storms or when unused for long
periods of time.
8) Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.

Box Contents
EN 3
INTELLIDASH PRO S
Shock Absorbing
Gel Strip
3M Adhesive Disk
Type C - Type C
cable
AUX Cable
User Manuals
Power Cable
Cable
Clips
Cable
Straps
Mount

Product Overview
EN 4
2. AUDIO OUT Jack
3. USB Type-C connector
4. USB Port
5. Reset button
6. DC 12V Power port
7. Display
9. Knob
8. Mounting hooks
10. Lock
11. Adhesive Suction Cup
12. Power Plug
1. AV IN(For Optional Back Up
Camera, not available in all regions)
1. AV IN (For optional backup
Camera, not available in all regions)
1
2
3
4
5
7
6
8
2. AUDIO OUT Jack
3. Type-C Connector
4. USB Port
(Only for USB Stick, not for charging)
5. Upgrade button (For firmware update use)
6. DC 12V Power port
7. Microphone
8. 7-inch IPS touch Display
9. Power Plug
10. Mounting hooks
11. Knob
12. Lock
13. Adhesive Suction Cup
9
10
11
12
13

EN 5
Set-Up Mount & Power On
Step One
Insert the adhesive suction cup mount into the bracket on the
back of the INTELLIDASH PRO S and slide it up to lock it in place.
Remove the protective film from the adhesive suction cup on the
bottom of the mount. Then press the suction cup onto your dash-
board and push the lock down to secure it in place. Adjust the
INTELLIDASH PRO S’s angle and height so that it does not block
your view of the road, and tighten the knob to secure it in place.
Step Two
Lock
Open Lock
Closed
Tighten
Knob

If you find your INTELLIDASH PRO S is rattling and/or coming
into contact with your dashboard, use the Shock Absorbing
Gel Strip to protect your INTELLIDASH PRO S and dashboard.
Just remove the plastic film from both sides, and place it on
the bottom of your INTELLIDASH PRO S, or on the dashboard
directly below it.
Step Three
Smooth side sticks your
INTELLIDASH PRO S
Textured side sticks your car
EN 6

Step Four
Connect one end of the supplied power cable to the DC 12V
power port of the device.
You can secure your cable between the edge of the windshield
and the dashboard to ensure that it does not become tangled.
Plug the adapter end of the power cable into your car’s DC 12V
power outlet. INTELLIDASH PRO S will automatically power on
when your car is powered on, and will power off when your car
is powered off.
Step Five
EN 7

• Ensure that the INTELLIDASH PRO S is mounted in a place
that does not block your view of the road.
• The INTELLIDASH PRO S has built-in speakers. However,
to play music over your car radio please ensure that the
FM Transmitter function has been set up and is connected
properly with your car radio. (See Page 22)
• Some Android operating versions may not be compatible
with the Android Auto app. As such, we strongly recom-
mend updating your phone’s operating system to the latest
version.
• Ensure that you are using the power cable provided with
the purchase of your phone (or compatible cable) to con-
nect the INTELLIDASH PRO S and your phone.
• Apps displayed on the INTELLIDASH PRO S (when pairing
with either the CarPlay or Android Auto app) will vary de-
pending on the apps available on the connected phone.
• The INTELLIDASH PRO S does not support it’s own GPS.
All Navigation app’s are functionally dependent on the
connected phone.
IMPORTANT NOTES
EN 8

Home Screen
The home screen is used to navigate to all apps on this device.
2021-06-04
1. Home button
2. Date
3. Screen On/Off buttton
4. Day/Night mode button
5. Volume control button
6. USB device status
7. Bluetooth connection status
8. Return button
9. Time
10. Android Auto app
11. Apple CarPlay app
12. Bluetooth Phone app
13. Bluetooth music player
14. USB media player
15. System settings
16. FM Transmitter settings
EN 9

Apple CarPlay
EN 10
You can connect your INTELLIDASH PRO S to your iPhone with
either of these methods:
Method 1: Wirelessly connect the INTELLIDASH PRO S to
your iPhone
With Bluetooth, you can use Carplay or listen to music without
any cable connection.
1. When your INTELLIDASH PRO S is powered on, the INTEL-
LIDASH PRO S’s Bluetooth will be turned on automatically. In
your phones’ settings, turn on both Wi-Fi and Bluetooth.
2. In your phone’s Bluetooth settings, search for “DU2000”,
and tap “DU2000” to connect.
Supported iPhones: Apple iPhone 6S or above
When connecting for the first time, a Bluetooth Pairing Request
dialog box will pop up on your phone screen, tap Pair. Then you
will be asked “Allow contacts and Favorites Sync?”, tap Allow
for both to enable incoming and outgoing calls, messages and
more in CarPlay.
After bluetooth pairing, the phone’s Wi-Fi will automatically join
your INTELLIDASH PRO S’s WiFi network ”CAR-WiFi-XXXXX”. If
connected successfully, CarPlay will launch automatically.
ON
DU2000
Wi-Fi
ON

EN 11
Method 2: Cable connect your INTELLIDASH PRO S to
your iPhone
Plug the Type C end of your Lightning -Type C cable into your
INTELLIDASH PRO S, plug the Lightning end into your iPhone.
Note: You must use an Apple original or Apple authorized made
for iPhone Type C to Lightning cable (not included) with your
INTELLIDASH PRO S.
If it did not connect automatically, go to your phone’s Wi-Fi set-
tings and try to join the network “CAR-WiFi-XXXXX”. If this did
not work, Tap the next to the DU2000 in Bluetooth settings,
and make sure you’ve enabled CarPlay.
To disconnect your phone from CarPlay, use either of the two ways:
1. Turn your phone’s Wi-Fi off.
2. Tap the next to the DU2000 in Bluetooth settings, and
disable CarPlay to disconnect.
Wi-Fi
Wi-Fi
DU2000
DU2000
DU2000

EN 12
5G
Scroll Left/Right
Press to return to Home screen
CarPlay Shortcut Menu
Press to enter CarPlay
system settings
In the CarPlay main menu, you’ll see all CarPlay compatible
apps. Apps displayed on the INTELLIDASH PRO S will vary
depending on the apps of the connected phone.
NOTE: Audio and music apps can be used simultaneously with
Waze or Maps.
The CarPlay main menu will launch, allowing your phone to
access the following features and more.
Siri SMS Messages Apple Music, Spotify, etc.
Hands-free calls Apple Maps
USB-Lightning cable
(Not supplied)
Lightning end
Type C end
The Type C port of
INTELLIDASH
PRO S
To your
Phone

Tap on the shortcut menu to display the main CarPlay screen.
Tap on the shortcut menu to return to CarPlay main menu.
Tap on the shortcut menu to display the full map screen for
navigation map.
5G
5G
EN 13
SAULT! To My Friends
DJLZ

Tap on the shortcut menu to display the main CarPlay screen.
Android Auto
EN 14
You can connect your INTELLIDASH PRO S to your smartphone
with either of these methods:
Method 1: Wirelessly connect the INTELLIDASH PRO S to
your Android Smartphone
With Bluetooth, you can use Android Auto or listen to music
without any cable connection.
1. When your INTELLIDASH PRO S is powered on, the INTEL-
LIDASH PRO S’s Bluetooth will be turned on automatically. In
your phones’ settings, turn on both Wi-Fi and Bluetooth.
2. In your phone’s Bluetooth settings, search for “DU2000”,
and tap “DU2000” to connect.
Supported Smartphones: Android 11 or above
.
When connecting for the first time, a Bluetooth Pairing Request
dialog box will pop up on your phone screen, tap Pair. Then you
will be asked “Allow contacts and Favorites Sync?”, tap Allow
for both to enable incoming and outgoing calls, messages and
more in Android Auto.
After bluetooth pairing, the phone’s Wi-Fi will automatically join
your INTELLIDASH PRO S’s WiFi network ”CAR-WiFi-XXXXX”. If
connected successfully, Android Auto will launch automatically.
If it did not connect automatically, go to your phone’s Wi-Fi
settings and try to join the network “CAR-WiFi-XXXXX”.
To disconnect from Android Auto, turn off the Wi-Fi in your
phone’s settings.
ON
DU2000
Wi-Fi
ON

EN 15
Method 2: Cable connect your INTELLIDASH PRO S to
your
Android Smartphone
If your phone has a Micro USB port, plug the Micro USB end of the
Micro USB - Type C cable (not supplied) into your Android phone,
and plug the Type C end of the cable into your INTELLIDASH PRO S.
If your phone has a Type C port, plug one end of the supplied
Type C - Type C cable into your INTELLIDASH PRO S, and plug the
other end into your Android phone.
Note: You must use an Apple original or Apple authorized made for
iPhone USB-C to Lighting Cable with your INTELLIDASH PRO S.
Type-C end
Micro USB end
Type-C
end
To your
Phone
To your
Phone
Type-C
end
Or
Type C-Type C cable
(Supplied)
Micro USB - Type C cable
(Not supplied)
The Type C port of
INTELLIDASH PRO S
Type C port
USB -Type C adapter
(Not supplied)
USB -Lightning cable
USB -Micro USB cable
USB port
Tip: If you do not have the Type C cables listed above, and only
have USB charging cable with your phone, you can also use an
USB-Type C adapter (not supplied).

The Android Auto app will launch, allowing your phone to ac-
cess the following features and more.
Google Assistant SMS Messages Google Maps
SMS Messages Hands-free calls Music,News
By default, after launch, the IINTELLIDASH PRO S will enter the
Google Maps screen.
Press to return to
Android Auto
main screen
Now Playing audio Press to view
your notifications
and messages.
Google
Assistant
EN 16
In the Android Auto main menu, you’ll see all compatible apps.
Apps displayed on the INTELLIDASH PRO S will vary depending
on the apps of the connected phone.
NOTE: Audio and music apps can be used simultaneously with
Waze or Maps.
Tap at the bottom of the screen to return to Android Auto
main menu.

Scroll Left/Right
Press to return to Home screen
Important: Ensure that your phone’s operating system has been
updated to the latest version. This is necessary as some older
Android versions may not be fully compatible with the Android
Auto.
EN 17
iOS Mirror
iOS Mirror is supported on most iPhones. iOS Mirror can mirror
your iPhone screen to the INTELLIDASH PRO S display.
Before using iOS Mirror, configure settings in the INTELLIDASH
PRO S. On the home screen, tap Settings and , and tap
the < / >icon next to iOS to change from CarPlay to iOS Mirror.
A dialogue box will pop up telling you to unplug your phone and
plug it in again before changing to iOS Mirror. Tap to select
iOS Mirror, and then disconnect your phone and reconnect
it using the Type C - Lightning cable. This should launch iOS
Mirror automatically.
iOS Mirror

Android Link
Android Link is supported on most Android phones. Android
Link can mirror your screen to the INTELLIDASH PRO S display.
Before using Android Mirror, configure settings in the INTELL-
IDASH PRO S. On the home screen, tap Settings and ,
and tap the < / >icon next to Android to change from Android
Auto to Android Link.
EN 18
Note: For iOS Mirror and Android Link, when connecting for the
first time, you have to enable the ‘USB debugging mode’ (It may
be called a similar name on certain devices) in your smart phone.
Auto Link
A dialogue box will pop up telling you to unplug your phone
and plug it in again before changing to Android Link. Tap to
select Android Link, and then disconnect your phone and recon-
nect it using the Type C-Type C or Micro USB cable. This should
launch Android Link automatically.

Bluetooth Phone
Before using this feature, make sure you have synced your
contact list with the INTELLIDASH PRO S: Tap near the
DU2000 in your phone’s Bluetooth settings, and turn Sync
Contacts on.
Dial Pad: The Dial Pad can be used to make calls from your
paired phone using the INTELLIDASH PRO S.
Contact List: The Contact List can be used to search through
your paired phone’s available contacts to call them using the
INTELLIDASH PRO S.
The Bluetooth Phone allows you to pair your phone to your
INTELLIDASH PRO S, so you can make and receive calls, send
messages and more, all without using CarPlay/Android Auto.
Dial pad Contact list Call logs Bluetooth Connec-
tion Settings
EN 19