Carro Me-f800w User manual

1 1

1:1

项目

库

文件名

1246

技术要求(版本号:B，2020-01）

2.说明书警语及认证标志应满足CE/UL标准，CE：警语部分大写字母高度不低于3mm，CE标志不低于5mm，WEEE标志不低于7mm；

UL：大写字母字高不小于1/12”(2.11mm)，小写字母字高不小于1/16”(1.6mm)，“IMPORTANT SAFEGUARDS”，“SAVE

THESE INSTRUCTIONS”等词，其字高不小于3/16”(4.8mm)，IMPORTANT SAFEGUARDS 必须在最前面。

3.产品应符合QMG-J53.021《产品说明书技术条件》的有关要求。

4.有ROHS指令要求的物料应符合美的企业标准QML-J11.006《产品中限制使用有害物质的技术标准》。

会签

制图

设计

校对

审核

标准化

审定

日期

标记处数更改文件号签字日期

加湿器

说明书

重点

校对项

1.版面尺寸

2.材质标注

3.物料编码

4.颜色标注

5.客户型号

6.产品名称

7.重量标注

8.电压功率

-----

----- -----

-----

9.说明书装

订要求

10.警语/认证

标志高度

11.档位、

控制面板

一致性

1.备注[70P以下为钉装，70P以上为胶装（特殊要求除外）]

Ultrasonic Humidifier

USER MANUAL

Model: ME-F800W

Warning Notice: Before using

this product, please read this

manual carefully and keep it for

future reference.

The design and specifications are

subject to change without prior

notice for product improvement.

Consult with your dealer or

the manufacturer for details.

Rated voltage: 120V

Rated power: 24W

Frequency: 60Hz

Ultrasonic Humidifier

USER MANUAL

Model: ME-F800W

Warning Notice: Before using

this product, please read this

manual carefully and keep it for

future reference.

The design and specifications are

subject to change without prior

notice for product improvement.

Consult with your dealer or

the manufacturer for details.

Rated voltage: 120V

Rated power: 24W

Frequency: 60Hz

Page 2 

Read This Manual

Inside you’ll find many helpful hints on how to use and maintain your appliance

properly. Just a little preventive care on your part can save you a great deal

of time and money over the life of your appliance. You’ll find many answers

to common problems in the troubleshooting tips - you should be able to fix

most of them quickly before calling customer service. These instructions may

not cover every possible condition, so attention to safety details is required

when operating and maintaining this product.

SAFETY PRECAUTIONS

To prevent injury to the user or other people and property damage, the

instructions shown here must be followed. Incorrect operation due to ignoring

of instructions may cause harm or damage. The different levels of risk is shown

by the following indications.

CAUTION

This symbol indicates a hazardous situation, which, if

not avoided, could result in minor or moderate injury.

This symbol addresses practices not related to physical

injury.

NOTICE

This symbol indicates a hazardous situation which, if

not avoided, could result in death or serious injury.

WARNING

READ AND SAVE THESE INSTRUCTIONS

IMPORTANT INSTRUCTIONS

• In the case of power up, do not plug or unplug the power cord with wet hands

to avoid electric shock;

• Do not force the water tank to work in the case of no water;

• Do not add any additives not produced or supervised by the company to the

water tank;

• Do not put or place anything or pets into the water tank;

• Do not add water to the atomization outlet;

• When the humidifier is working, do not touch the water in the water tank or the

parts sank in the water;

• Do not cover the atomization outlet, and please keep it clear above the outlet;

Page 3 

IMPORTANT INSTRUCTIONS

• Do not replace the power cord without authorization, or connect the power

cord halfway or use other appliances in parallel;

• Do not place the appliance near water source;

• Do not disassemble, modify or repair internal parts without authorization;

• Do not climb or sit on the appliance;

• Do not directly flush the humidifier with water;

• Do not store flammable or explosive materials around the humidifier;

• Do not place it near heat source;

• Do not turn off the humidifier by unplugging the power cord directly;

• Do not use volatile oil, alcohol, thinner, etc. to clean the machine, otherwise, the

product may be damaged;

• Do not modify the use and function of the product without permission;

• When the power is turned off in low temperature weather, the water must be

drained.

• Do not place the water container on the live product, the water immersing in the

product will weaken the electrical insulation, resulting in Electric shock, fire, etc;

• Please keep a distance of more than 12 inch between the humidifier and other

products;

• Please use purified water for humidification;

• Please do not use a damaged or worn power cord; Do not replace the power

cord without authorization. If the power cord is damaged, it must be replaced

by the manufacturer, its service department or professional from similar

department to avoid danger.

• The power must be cut off in thunderstorm;

• When an abnormal phenomenon (like a burnt smell) occurs, the operation must

be stopped and the power supply is cut off.

• Please unplug the power cord and clean the water tank, when the appliance is

not used for a long time;

• To avoid bacterial growth, please always change the water in the water tank.

• When the appliance is moved, please unplug the power cord to keep the water

tank stable and to prevent the water from overflowing in the water tank;

• If the appliance is tilted when filled with water, be sure to unplug the power

cord immediately and send it for inspection.

• Suitable temperature for this product: 41°F -104°F; relative humidity: less than

80% RH (please fill purified water with water temperature below 104°F).

Matters that may cause minor injury or property damage

Please unplug the power plug when filling and cleaning.

The power supply must be within the specified voltage range of the product.

CAUTION

Page 4 

This humidifier is pre-assembled in factory.

ASSEMBLY

RULES FOR SAFE OPERATION

SPECIFICATIONS

Model Rated

voltage

Rated

frequency

Rated

power Noise Volume

of tank

ME-F800W 120V ~60Hz 24W 38dB 2.11Gal

WARNING

• Please be sure to unplug the power cord before filling water.

• The level of the water added shall not be higher than the highest water level;

• Please be not to add the water in the atomization outlet when the water is

added;

• Please do not add additives like essential oil, perfume, drug, etc. to the water.

• Please use the purified water below 104°F(Do not use distilled water).

NOTICE

•The following are the design parameters of ME-F800W the measured

parameters are subject to the product;

•The humidification amount will vary, depending on the temperature and

humidity in the room.

• Actualhumidification amount isnot less than 90% the standard 390mL/h.

Page 5 

PARTS AND FEATURES

Manual × 1

NOTICE

• The pictures of the Manualare for referenceonly, and theactual product in

thepacking box shall prevail

• The product appearance and function vary with themodel; Please be subject

to the realproduct,with optional reading of the respective function

description.

Water Mist

Guiding Tube

Water Tank

Main Unit

Control Panel

Atomization Outlet

Page 6 

INSTRUCTION FOR USE

Two methods forwater filing

Method A

Fill the water tank directly through the main unit cover.Please use

purified water.Please do not add the water in the atomization outlet.

Method B

Lift the main unit of the humidifier up and fill purified water directly from top

of the water tank.

Atomization Outlet Main Unit Cover

Purified

Water

Purified Water

Page 7 

OPERATION INSTRUCTIONS

Buttons Operation

On/Off

Atomization

adjustment

Timing button

1. Shortly press this button to enter the on/idle state.

2. In the on/idle state, press and hold 3 seconds till hear “be-

ep”, the WIFI signal on the screen will blink and enter the

CARRO HOME APP connection Mode.

Under working conditions, the humidity and atomization

amount can be set to three levels (small, medium and

large). Press and hold till hear “beep” to turn off the display

screen light.

1.Shortly press in the working conditions, you can cycle to

set the timer function.The timer setting can be 0h1h2h4h8h0h.

2. In the process of setting, the setting timer time will be

displayed first, and then if you do not operate, the timer

will flash 3 times and then switch to display the humidity

of the current environment.

3.The timer time displays in a countdown way. After setting

the timer, if you press the timer button again, the operation

screen will display the remaining time before shutdown,

and then press the timer button again to re-set the timer.

4. After the timer is turned on, press and hold the timer button

for 3 seconds to exit the timer setting state.

NOTICE

Control Panel

• If the indoor temperature is too low or the humidity is too high, and the mist

cannot be fully diffused, it is recommended to reduce the volume of water

mist.

• When humidity setting lower than current humidity, the atomizing mist will

stop within two minutes.

Operation Part

Display Part

WiFi indicator

light

Humidity On/Off

Humidity setting On/Off, this On/Off button for preventing

mistakenly touching. The default humidity setting is 60%RH.

The indicator light is on when the humidifier is shortage of

water.

When connecting to the network, the indicator light is on.

01 small atomization amount

02 medium atomization amount

03 large atomization amount

0h/01h/2h/4h/8h timer

Display the humidity of the environment, such as 60%.

Page 8 

CLEANING AND MAINTENANCE

WARNING

Before cleaning or descaling, be sure to unplug the power cord.

Do not use abrasive, corrosive, or flammable cleaners (such as bleach or

alcohol) to clean any part of the humidifier.

The humidifier must regularly clean the scale and debris in the water tank

and sink. It is recommended to clean it once a week.

•

Water shortage

indicator light

• IMPORTANT TIP: DO NOT leavethe humidifier plugged in for prolonged

periods (i.e. several days or more) without use.

• This causes premature failure of the circuitry. When the humidifier is not in

use, press the control button until the light goesoff, then UNPLUG it.

Lift the main unit cover.

Fig 1 Fig 2 Fig 4 Fig 5

Atomizing Head

Assembly

Lift the main unit up in

the direction of the arrow.

Placed the main unit on the

platform and stabilize it.

Cleaning the outer casing

Wipe and clean the surface of the whole machine with a slightly damp soft

cloth. In case of stubborn stains, add a small drop of detergent to clean it,

and then wipe the detergent away.

Tank cleaning

First take out the main unit cover, then lift the main unit upwards, shake

the main unit slightly, so that the water in the mist guiding tube flows back

to the water tank, put the main unit aside, then pour clean water into the

water tank, and add an appropriate amount of detergent for cleaning.

Use a clean cloth to dry the inside and outside of the water tank.

Warning:Do not use a dripping soft cloth to clean the outer casing, or rinse

it with a shower.

Page 9 

Clean the outside part

of the machine.

Lift the main unit up in

the direction of the arrow.

Clean the outside part

of the machine.

Fig 3

Fig 6

Fig 7 Fig 8

Cleaning the inside & outside of the mist guiding tube,and the

atomizing head

1. Rotate counterclockwise to unscrew connecting hose of the main unit

and the atomizing head as shown in Fig 1.

2. Hold the main unit with one hand, press the spring switch of the mist guidi-

ng tube with the other hand at the same time as shown in Fig 2, and remove

the main unit in Fig 3.

3. Rotate the lower cover of the tube clockwise to remove the cover, and

then take out the atomizing head assembly as shown in Fig 4.

4. Clean the dirt inside the tube with a long-handled soft brush as shown in

Fig 5, and then wash the tube in the sink.

5.Use a screwdriver to poke the small hole in the back of atomizing head

assembly, and take out the atomizing head for cleaning as shown in Fig 6,

and wipe the center of it with a damp soft cloth.

6.When cleaning the components of the float, first rotate the upper shell of the

float clockwise and take it out, and then take out the foam of the float as

shown in Fig 7.

7.Wipe the upper shell of the float with a clean damp cloth, use a soft brush to

clean the lower part of the float as shown in Fig 8, and then put it in sink to clean

it.

Page 10 

Foam

Install the atomizing head

on the float assembly.

Put the main unit on the table,

and align the mist guiding tube

with slot of it for installation.

Install the float assembly into

the mist tube.(The upper shell of

the float faces the direction of the

main unit.)

Rotate the lower cover of

the tube clockwise.

Connect the atomizing head

hose to the main unit.

NOTICE

Mist tube assembly installation

Page 11 

The foam of the float in Fig 7 is important part of atomizing head assembly,

DO NOT mistakenly discard it as part of the packaging.

APP Control Connection:

1.First download the free Carro Home app from the App Store or Google Play

or scan the QR Code as below.

Note: This humidifier needs to use 2.4Ghz wifi to work when you connecting

the device, and after connecting it can use the 5Ghz or 2.4Ghz.

2.Open the Carro Home app to create your account. The

account with "Carro Home" can be registered through E-mail

or Mobile phone.

3.Connect the device to the Carro Home APP(The WIFI signal on the screen

is blinking):

a.Press "+" button,select "Smart Home Appliances"on the sidebar menu on

next page,then select "Humidifier".

b.Connect to your home WIFI (Only for 2.4Ghz).

c.Press the Smart Humidifier "+"button to wait for the connection to compl-

ete.

Note:Press and hold the ""till hear "beep", the WIFI will blink and enter the

CARRO HOME APP connection Mode.

4.Connect the device to the Alexa:

a.Make sure you have connected the device to the app and working normally.

b.Open Alexa app, go to the skill to search "Carro Home" skill.

c.Link the skill, log in with your Carro Home app account and password, then

authorize and connect with Carro Home app.

d.Then the Alexa will find out the device automatically.

5.Connect the device to the Google Home

a.Make sure you have connected the device to the app and working normally.

b.Open Google Home app, Set up a device, choose "Works with Google".

c.Search "Carro Home", log in with your Carro Home app account and passw-

ord, then authorize and connect with Carro Home app.

d.Then the Google Assistant will find outthe device automatically.

6.Connect the device to the Siri shortcuts

a.Make sure you have connected the device to the app and working in functi-

onal.

b.Tap "Smart" on the main menu.

c.Tap "+" button.

d.Tap "launch Tap To Run”.

e.Tap "Run the device".

f.Choose the device you want to control by Siri.

g.Select the function you want to control by Siri.

h.Then save it.

I. Add to Siri, choose the scene you just made, Add to Siri.

j. Enter the sentence you want to say to make the device works, Add to Siri.

Page 12 

SOLUTION

CAUSE

PROBLEM

The humidifier does not

work

Mist has a bad odor

Small amount of mist

The display screen is

on,windy but no mist

Fouling of atomizing head

assembly

Too little ,or too much water(above

the maximum water mark)

The atomizing head is stuck

Clean the atomizing head

assembly.

Fill enough water,or pour out

some water.

Clean and gently drag the

hose of the atomizing head,

make it smooth.

Humidifier is emitting a

white dust/residue.

There is abnormal

noise

The water tank shows

water shortage, but is

filled with water; the

humidifier does not

work for a long time.

The display screen

shows "P1"

The power plug is not plugged well

There is no water in the water tank

The water tank is not in place

The water tank is not clean.

New machine Leave the water tank open in

the shade for 12 hours.

Use of tap water with a high

mineral content, aka “hard water.”

The appliance is not in place, tilted or

unstable

Excessive tilting of the appliance at

an angle causes the water level in

the water tank to be judged as low

water level, so the appliance

automatically starts protection mode

and stops.

The water tank is short of water

The power plug is plugged well

The water is added to the tank

The water tank is fastened in

place

The clean water is refilled, or

the water tank cleaned

Clean tank and use only demin-

eralized or purified water.

The appliance is placed on a

solid surface or a flat place

The appliance is put on a flat

and firm place, and kept steady

The water is added to the tank

SERVICE GUIDE

NOTICE

• If thehumidifier doesnot work properlyafter thefollowing suggestions,

pleasecontact the customer service center or local servicestation.

Fault Handling

Page 13  

WHAT IS COVERED

This warranty covers any manufacturing defect for the humidifier, with the

exceptions stated below.

HOW T0 GET SERVICE

Please keep your receipt or other document so that we may process your

warranty request. To obtain service,contact by E-mail : [email protected]

Tel:888-253-2374.

HOW LONG COVERAGE LASTS

This warranty runs for one1years from the date of purchase.

WHAT IS NOT COVERED

The warranty applies only to the original Purchaser within the USA and does

not cover:

• Wear and tear

• Stains

• Misuse or improper maintenance

• Alteration or repair by unauthorized representatives

• Damage resulting from transit or handling

• Damage caused by improper placement (such as placing products near he-

ating pipes, etc.)

• Deterioration caused by Force Majeure (unforeseeable circumstances,such

as fire, earthquake, flood, lightning and other natural disasters, environmen-

tal pollution )

• Any humidifier outside of the contiguous 48 states

• Any claim made outside of the warranty period

QUESTIONS? CONTACT US.

Carro USA Inc.

1431 S.Baker Ave.Ontario CA91761

Tel:888-253-2374

www.carrohome.com |[email protected]

ONE (1) YEAR LIMITED WARRANTY

Page 14 

FCC Statement:This device complies with part 15 of the FCC Rules. Operation is subject to the followingtwo conditions: (1) This device may not cause harmful interference, and (2) this devicemust accept any interference received, including interference that may cause undesiredoperation.This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one or more of the following measures:—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.—Consult the dealer or an experienced radio/TV technician for help.Caution: Any changes or modifications not expressly approved by the party responsiblefor compliance could void the user's authority to operate the equipment.This equipment should be installed and operated with minimum distance 20cm between the radiator&your body.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Table of contents

Other Carro Humidifier manuals