Carson Csf7g3p User manual

Colours may vary

7kg Top Load Washing Machine -

CSF7G3P and CST7D3P

User Manual

[Revision 5.0 May 2019]

READ THIS MANUAL CAREFULLY BEFORE USE – FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE AND

MAY VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by this manual may vary in

appearance, assembly, inclusions, specifications, description and packaging.

7kg Top Load Washing Machine - CSF7G3P and CST7D3P

Safety

Safety messages are designed to alert you to possible dangers or hazards that could cause death, injury or

equipment or property damage if not understood or followed. Safety messages have the following symbols:

You WILL be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be INJURED if you do

not follow instructions or equipment

damage may occur.

It is vital that you read and understand this

user manual before using the product,

including safety warnings, and any assembly

and operating instructions. Keep the manual

for future reference.

Safety precautions and recommendations

detailed here must be fully understood and

followed to reduce the risk of injury, fire,

explosion, electrical hazard, and/or property

damage.

Safety information presented here is generic

in nature – some advice may not be

applicable to every product. The term

"equipment" refers to the product, be it

electrical mains powered, battery powered or

combustion engine powered.

•Before Use - If you are not familiar with the

safe operation/handling of the equipment or

are in any way unsure of any aspect of

suitability or correct use for your

application, you should complete training

conducted by a person or organization

qualified in safe use and operation of this

equipment, including fuel/electrical handling

and safety.

•Do NOT operate the equipment in

flammable or explosive environments, such

as in the presence of flammable liquids,

gases or dust. The equipment may create

sparks or heat that may ignite flammable

substances.

•Keep clear of moving parts.

•Equipment may be a potential source of

electric shock or injury if misused.

•Do NOT operate the equipment if it is

damaged, malfunctioning or is in an

excessively worn state.

•Do NOT allow others to use the equipment

unless they have read this manual and are

adequately trained.

•Keep packaging away from children - risk

of suffocation! Operators must use the

equipment correctly. When using the

equipment, consider conditions and pay

due care to persons and property.

General Work Area Safety

•Work areas should be clean and well it.

•Do not operate the equipment if

bystanders, animals etc are within

operating range of the equipment or the

general work area.

•If devices are provided for connecting dust

extraction / collection facilities, ensure

these are connected and used properly.

Dust collection can reduce dust-related

hazards.

General Personal Safety

•Wear appropriate protective equipment

when operating, servicing, or when in the

operating area of the equipment to help

protect from eye and ear injury, poisoning,

burns, cutting and crush injuries. Protective

equipment such as safety goggles,

respirators, non-slip safety footwear, hard

hat, hearing protection etc should be used

for appropriate equipment / conditions.

Other people nearby should also wear

appropriate personal protective equipment.

Do not wear loose clothing or jewellery,

which can be caught in moving parts. Keep

hair and clothing away from the equipment.

•Stay alert and use common sense when

operating the equipment. Do not over-

reach. Always maintain secure footing and

balance.

•Do not use the equipment if tired or under

the influence of drugs, alcohol or

medication.

•This equipment is not intended for use by

persons with reduced physical, sensory or

mental capabilities.

General Fuel Safety

•Petrol/fuel/gasoline is extremely flammable

– keep clear of naked flames or other

ignition sources.

•Do not spill fuel. If you spill fuel, wipe it off

the equipment immediately – if fuel gets on

your clothing, change clothing.

•Do NOT smoke near fuel or when

refuelling.

•Always shut off the engine before

refuelling.

•Do NOT refuel a hot engine.

•Open the fuel cap carefully to allow any

pressure build-up in the tank to release

slowly.

•Always refuel in well ventilated areas.

•Always check for fuel leakage. If fuel

leakage is found, do not start or run the

engine until all leaks are fixed.

General Carbon-Monoxide Safety

•Using a combustion engine indoors CAN

KILL IN MINUTES. Engine exhaust

contains carbon-monoxide – a poison you

cannot smell or see.

•Use combustion engines OUTSIDE only,

and far away from windows, doors and

vents.

General Equipment Use and Care

•The equipment is designed for domestic

use only.

•Handle the equipment safely and carefully.

•Before use, inspect the equipment for

misalignment or binding of moving parts,

loose components, damage or any other

condition that may affect its operation. If

damaged, have the equipment repaired by

an authorised service centre or technician

before use.

•Prevent unintentional starting of the

equipment - ensure equipment and power

switches are in the OFF position before

connecting or moving equipment. Do not

carry equipment with hands or fingers

touching any controls. Remove any tools or

other items that are not a part of the

equipment from it before starting or

switching on.

•Do not force the equipment. Use the

correct equipment for your application.

Equipment will perform better and be safer

when used within its design and usage

parameters.

•Use the equipment and accessories etc. in

accordance with these instructions,

considering working conditions and the

work to be performed. Using the equipment

for operations different from those intended

could result in hazardous situations.

•Always keep equipment components

(engines, hoses, handles, controls, frames,

housings, guards etc) and accessories

(cutting tools, nozzles, bits etc) properly

maintained. Keep the equipment clean and,

where applicable, properly lubricated.

•Store the equipment out of reach of

children or untrained persons. To avoid

burns or fire hazards, let the equipment

cool completely before transporting or

storing. Never place or store the equipment

near flammable materials, combustible

gases or liquids etc.

•The equipment is not weather-proof, and

should not be stored in direct sunlight, at

high ambient temperatures or locations that

are damp or humid.

•Do not clean equipment with solvents,

flammable liquids or harsh abrasives.

•For specific equipment safety use and care,

see Equipment Safety.

7kg Top Load Washing Machine - CSF7G3P and CST7D3P

General Electrical Safety

•Inspect electrical equipment, extension

cords, power bars, and electrical fittings for

damage or wear before each use. Repair or

replace damaged equipment immediately.

•Ensure all power sources conform to

equipment voltage requirements and are

disconnected before connecting or

disconnecting equipment.

•When wiring electrically powered

equipment, follow all electrical and safety

codes.

•Wherever possible, use a residual current

device (RCD).

•High voltage / high current power lines may

be present. Use extreme caution to avoid

contact or interference with power lines.

Electrical shock can be fatal.

General Electrical Safety

•Electrically grounded equipment must have

an approved cord and plug and be

connected to a grounded electrical outlet.

•Do NOT bypass the ON/OFF switch and

operate equipment by connecting and

disconnecting the electrical cord.

•Do NOT use equipment that has exposed

wiring, damaged switches, covers or

guards.

•Do NOT use electrical equipment in wet

conditions or in damp locations.

•Do NOT use electrical cords to lift, move or

carry equipment.

•Do NOT coil or knot electrical cords, and

ensure electrical cords are not trip hazards.

General Service Information

•The equipment must be serviced or

repaired at authorised service centres by

qualified personnel only.

•Replacement parts must be original

equipment manufacturer (OEM) to ensure

equipment safety is maintained.

•Do NOT attempt any maintenance or repair

work not described in this manual.

•After use, the equipment and components

may still be hot – allow the equipment to

cool and disconnect spark plugs and/or

electrical power sources and/or batteries

from it before adjusting, changing

accessories or performing repair or

maintenance.

•Do NOT adjust while the equipment is

running.

•Perform service related activities in suitable

conditions, such as a workshop.

•Replace worn, damaged or missing

warning/safety labels immediately.

Washing Machine Safety

Ensure the earth connection in the electrical supply is correct before connecting the power cord. The position of electrical cords and connections

must NOT be subject to splashing or moisture.

Switch OFF and disconnect the appliance from the electrical supply and fully close the water supply taps when the appliance is not in use.

Do not bend, twist or crush the electrical supply cord. Contact customer service immediately if the electrical supply cord is damaged in any way.

Do NOT install the machine in damp or excessively humid areas, such as bathrooms. Do NOT spray, wash or immerse the machine in water. Do

NOT place wet clothes on the control panel.

Hot water temperature must NOT exceed 65°C.

Do NOT allow machine vents to be obstructed or blocked if installing on soft or carpeted flooring.

Do not wash plasticised items such as raincoats, bicycle covers, etc that may tangle or damage the machine.

Do NOT use an un-earthed electrical supply or junction box. Do NOT use extension cords.

Do NOT open the machine lid or put your hands or any body parts into the machine when the machine is running - washing or spinning.

Do NOT dismantle or attempt repairs yourself. Have the machine serviced/repaired by an authorised service centre only.

Do NOT place hot or heavy objects on the machine.

Do NOT wash clothes that are contaminated with volatile materials such as solvents, petrol, acids or alkalines.

Do NOT allow children to play with the machine or be near the machine when it is operating.

Do NOT expose the machine to direct sunlight, rain, excessive humidity or heat.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience

and knowledge, unless they have been provided supervision or instruction concerning use of the appliance by a person responsible for their safety.

Ensure that you empty all pockets of objects such as coins, keys etc as they may cause damage to the machine and/or clothing.

•Ensure that water taps are properly connected and fully open when washing.

•Refer to washing detergent manufacturer instructions for correct usage and quantity information.

7kg Top Load Washing Machine - CSF7G3P and CST7D3P

Safety Symbols

The product may have safety warning labels attached to it, explained below. Understand the symbols on your

product and their meanings. If any stickers become unreadable, unattached etc., replace them.

Flammable Material Hazard

Flammable liquids, gases or

substances etc may present.

Avoid ignition sources and open

flames. Danger of fire.

Read User Manual

Read and fully understand

product safety warnings,

operation, procedures etc before

using the product.

Use Hand Protection

Wear appropriate hand protection

and take due care as the product

or use of the product may present

hand hazards.

Carbon-Monoxide Hazard

Do not use the product in

confined areas or without

adequate ventilation. Carbon-

monoxide poisoning can be fatal.

Electrocution / Electrical Shock

Hazard

High voltage or high current

electricity may be present or

required by the product. Take

due care when handling electrical

products, cables, plugs and

leads. Electrical shock can be

fatal.

Toxic Fumes / Dust Hazard

Using the product or by-products

from use may produce fumes,

smoke or particles that could be

harmful if inhaled. Wear

appropriate breathing protection

and have adequate ventilation.

Explosive Material Hazard

Combustible liquids, gases or

substances etc may be present.

Avoid ignition sources and open

flames. Danger of explosion.

Cutting / Amputation Hazard

The product may have blades,

edges or mechanical devices that

can cause severe cut injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Crush Hazard

The product may have blades,

edges or mechanical devices that

can cause severe crush injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Single Operator Only

The product must be operated by

a single person only. More than

one person operating the product

may introduce additional hazards.

Use Face Protection

Wear appropriate full-face

protection and take due care as

the product or use of the product

may present face and eye

hazards.

Use Foot Protection

Wear appropriate foot protection

and take due care as the product

or use of the product may present

foot hazards.

Use Eye / Ear / Head Protection

Wear appropriate eye and / or

ear and / or head protection and

take due care as the product or

use of the product may present

eye, hearing and head hazards.

Running Hazard

Do not run on or near the product

as doing so may present a fall

hazard.

Diving Hazard

Do not dive into the product as

doing so may present a neck /

head injury hazard.

Adult Supervision Required

Always supervise children and

other users of a product to

prevent drowning or injury.

Skin Penetration / Puncture

Hazard

The product may produce

pressure, emit liquids or objects

that can cause severe injury to

fingers, limbs, blood etc. Take

due care when handling and

using the product.

Hot Surface Hazard

Be aware that the product may

produce high temperatures and

hot surfaces that can cause burn

injuries.

Flying Debris Hazard

Be aware that the product or use

of the product may present

hazards produced by flying

debris. Wear appropriate clothing

and protective devices.

Moving Parts Hazard

Be aware that the product

contains or uses mechanical

devices that move or rotate.

Always wait for moving parts to

stop fully before handling the

product, adjusting, maintenance

etc.

7kg Top Load Washing Machine - CSF7G3P and CST7D3P

Carbon-Monoxide Hazard

Do not use the product in

confined areas or without

adequate ventilation. Carbon-

monoxide poisoning can be fatal.

Pull Hazard

Be aware that the product

contains or uses mechanical

devices that can pull in objects

and can cause severe injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Slope / Fall Injury Hazard

Be aware that using the product

on sloping surfaces or in slippery

conditions may present additional

dangers from falls and contact

with blades, moving parts, hot

surfaces etc.

"Slam Dunk" Warning

Do NOT attempt "slam dunk"

manoeuvres as this may result in

severe injury due to falling,

product breakage or collapse etc.

Electrocution / Electrical Shock

Hazard - Outdoor

High voltage or high current

electricity may be present or

required by the product. Do NOT

use in rain, damp or wet

conditions. Electrical shock can

be fatal.

Electrocution / Electrical Shock

Hazard - Disconnect

High voltage or high current

electricity may be present or

required by the product. Always

disconnect the product from the

electrical supply before handling

the product, adjusting,

maintenance etc.

Power Line Electrocution

Hazard

High voltage / high current power

lines may be present. Use

extreme caution to avoid contact

or interference with power lines.

Electrical shock can be fatal.

"Kick-Back" Hazard

High level of "kick-back" hazard

that can cause the machine to

suddenly rotate towards operator.

Kick-back injury can be fatal.

Winch Operator Position

Hazard

Do NOT stand between winch

and load. Do NOT use winch to

move people.

Winch Lift Hazard

Do NOT LIFT load vertically. Use

machine to PULL only.

Cable Hazard

Ensure that load bearing cable is

not kinked or knotted.

Winch Cable Hazard

Ensure that there is a minimum

number of cable coils on

winching mechanism.

Winch Hook Hazard

Carry hook to load – do NOT

throw or run.

Flash / Blinding Hazard

Wear appropriate eye protection

for welding. Direct exposure to

weld arcs may cause permanent

eye injury.

Laser Hazard

Laser may be in use – do NOT

look directly at laser or allow

others to.

7kg Top Load Washing Machine - CSF7G3P and CST7D3P

Table of Contents

Safety ......................................................................................................................................................... 2

Safety Symbols...........................................................................................................................................................4

Parts Identification .................................................................................................................................... 7

Assembly and Set-Up................................................................................................................................ 8

Installation...................................................................................................................................................................8

Unpacking...................................................................................................................................................................8

Levelling the Machine .................................................................................................................................................9

Connecting the Drain Hose ........................................................................................................................................9

Water Supply Requirements.......................................................................................................................................9

Water Pressure...........................................................................................................................................................9

Correct Water Supply Taps ......................................................................................................................................10

Attaching Tap Adaptors ............................................................................................................................................10

Connecting Inlet Hoses to the Machine....................................................................................................................11

Connecting Inlet Hoses to Tap Adaptors..................................................................................................................11

Checking Inlet Hose Connections ............................................................................................................................12

Detaching Inlet Hoses...............................................................................................................................................12

Control Panel ........................................................................................................................................... 13

Operation ................................................................................................................................................. 14

Step 1: Prepare the Load and Switch the Machine ON............................................................................................14

Step 2: Select Program ............................................................................................................................................14

Step 3: Select Process .............................................................................................................................................14

Step 4: Select Water Level .......................................................................................................................................14

Step 5: Select Water Temperature ...........................................................................................................................15

Step 6: Start the Wash..............................................................................................................................................15

Delaying the Wash Start Time ...........................................................................................................................15

Changing the Wash Program.............................................................................................................................15

Maintenance............................................................................................................................................. 16

Troubleshooting ...................................................................................................................................... 17

Specifications .......................................................................................................................................... 19

CSF7G3P .................................................................................................................................................................19

CST7D3P..................................................................................................................................................................19

7kg Top Load Washing Machine - CSF7G3P and CST7D3P

Parts Identification

Accessories:

CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON

7kg Top Load Washing Machine - CSF7G3P and CST7D3P

Assembly and Set-Up

Installation

•Do NOT place the machine on a slanting, uneven or unstable surface.

•Place the machine on a solid and level surface to avoid excessive vibration during operation.

Provide at least 10cm clearance

between the machine and walls or

other objects on all sides.

Ensure that the machine is not

resting on the drain hose.

The machine must be directly

connected to an earthed electrical

supply. Do NOT use junction

boxes or extension cords.

Check the electrical supply cord - if

it is damaged in any way, have it

replaced at an authorised service

centre.

Unpacking

•Remove all packaging from around and in the machine, including the transit bracket and wash tube

cushioning. Keep all packaging materials away from children. Dispose of packaging in an environmentally

responsible manner.

•Open the wash lid and remove all the accessories.

CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON

7kg Top Load Washing Machine - CSF7G3P and CST7D3P

Levelling the Machine

•The front feet of the machine are adjustable for height. To adjust, lift the front corners of the machine slightly

and rotate the feet as required so the machine is stable and level. If the feet have lock nuts, use the nuts to

secure the feet.

•Double-check that the machine is level and stable. If the machine is not level and stable, it may vibrate

excessively or move during use.

Connecting the Drain Hose

1. Insert the end of the drain hose through the

hooked hose support guide.

2. Position the hose so it is will drain into a suitable

outlet, such as laundry tub, sink, etc.

NOTE: The highest point of the drain hose must be

0.7 to 1.2m above floor level. If the hose is above or

below these heights, the machine may not drain

properly.

Water Supply Requirements

Water Temperature

•Cold: Recommended water temperature is 10 to 23°C.

•Hot: Recommended water temperature is 50 to 60°C.

•Warm: A mixture of hot and cold water. The water temperature is dependent upon the cold and hot water

supply temperatures and pressures.

IMPORTANT: Shut OFF the water supplies fully whenever the machine is not in use.

Water Pressure

Do NOT operate the machine if the water supply pressure is either below 0.03MPa or above 0.85MPa to avoid

possible damage to the machine.

CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON

7kg Top Load Washing Machine - CSF7G3P and CST7D3P

Correct Water Supply Taps

The tap mouth should be round, smooth and at least 10mm in length.

Attaching Tap Adaptors

1. Detach the hose from the tap adaptor - pull in the bottom part of the locking lever and pull down the hose

collar to release the hose.

2. Loosen the 4 screws in the tap adaptor ring, then place it over the end of the tap and push it up firmly

against the tap.

3. If the tap is larger than the ring, remove the reducer before installing the adaptor.

4. Evenly tighten the 4 screws in the tap adaptor ring so it is firmly secured to the tap.

5. Screw the nut up toward the tap adaptor ring.

6. Ensure that the gap between the top of the nut and the tap adaptor ring is less than 2mm.

CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON

7kg Top Load Washing Machine - CSF7G3P and CST7D3P

Connecting Inlet Hoses to the Machine

NOTE: Before installation, check that the rubber washer is in the pipe nut and is not damaged.

1. Screw the pipe nut tightly onto the machine water inlet connector.

Connecting Inlet Hoses to Tap Adaptors

1. Pull in the bottom part of locking lever and press down the hose collar.

2. Place the hose onto the tap adaptor then release the locking lever and hose collar. Push the hose onto the

adaptor until it "clicks" into place.

CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON

7kg Top Load Washing Machine - CSF7G3P and CST7D3P

Checking Inlet Hose Connections

1. Pull on the hose gently to check that it and the tap adaptor are secure.

2. Slowly open the tap until fully open, checking for leaks.

3. If there are any leaks, shut off the tap, then re-install the tap adaptor.

Detaching Inlet Hoses

1. Shut off the tap fully.

2. Pull in the bottom part of the locking lever and pull down the hose collar to release the hose.

3. Remove the hose from the tap adaptor.

CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON

7kg Top Load Washing Machine - CSF7G3P and CST7D3P

Control Panel

PROCESS

Press to select the required wash process (soak,

wash etc). Currently selected process indicators

illuminate.

WATER LEVEL

Press to select the required water level. Larger

amounts of clothes requires higher water levels. The

currently selected water level indicator flashes.

WATER SUPPLY

Press to select the required water temperature (hot,

cold, warm).

PROGRAM

Press to select the required wash program (Standard,

Quick etc).

START / PAUSE

Press to start/pause the washing machine. After

pausing the machine, press again to resume

operation.

POWER

Press to switch the machine ON or OFF. Note: After

switching the machine ON, it will switch OFF

automatically after 10 minutes if START/PAUSE is

not pressed.

DISPLAY

Shows the washing cycle time required / remaining

and "air dry" or delay timer settings.

PRESET (DELAY START) FUNCTION

Press and hold Water Level and Water Supply

simultaneously to set up a start delay timer - when

the timer expires, the machine will start operating.

CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON

7kg Top Load Washing Machine - CSF7G3P and CST7D3P

Operation

Step 1: Prepare the Load and Switch the Machine ON

Load the appliance with clothing. Do NOT overload. Add the required amount of washing powder or liquid

according to the manufacturer's instructions, then close the machine lid. If using powder, there is a detergent

dispensing tray for this purpose. Connect the machine to the electrical supply. Turn the water supply on. Press

POWER.

Step 2: Select Program

Press PROGRAM repeatedly until you reach the required wash program. Options are:

•Standard - Normal washing program.

•Quick - Faster washing cycle. Not suitable for heavily soiled garments (use Standard).

•Tub Clean - Special wash cycle to clean the washing machine tub and remove odours etc. Use this with a

proprietary tub cleaning agent as required and follow manufacturer instructions. Do NOT wash clothes when

using this program.

•Air Dry - Additional spinning cycle to reduce clothing dampness after washing. After selecting the program,

to set the additional spin time, press WATER LEVEL as required. Time can be from 10 to 90 minutes - the

display shows the air dry time.

Step 3: Select Process

Press PROCESS repeatedly to select a combination of washing functions. Options are:

•Wash - Washing cycle only.

•Wash + Rinse - Washing cycle, plus rinsing of clothing with clean water.

•Rinse + Spin - Rinse clothing with clean water, then spin to remove water from clothing. No washing cycle.

•Spin - Spin to remove water from clothing. No washing cycle.

•Wash + Rinse + Spin - Washing cycle, plus rinsing of clothing with clean water, then spin to remove water

from clothing.

•Wash + Rinse + Spin + Soak - Washing cycle, plus a pause for soaking (good for heavily soiled clothing),

rinsing of clothing with clean water, then spin to remove water from clothing.

Step 4: Select Water Level

Press WATER LEVEL repeatedly to select the appropriate water level for the size of the washing load. A larger

load requires more water (higher water level). The water level is correct when it just covers the load of clothes.

NOTE: For the appliance energy and water consumption ratings, the program used is "standard" (or "normal"),

soak process is off, water supply is "warm", water level is 8.

CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON

7kg Top Load Washing Machine - CSF7G3P and CST7D3P

Step 5: Select Water Temperature

Press WATER SUPPLY repeatedly to select the required water temperature. The currently selected temperature

setting illuminates on the display - "HOT" for hot water only, "COLD" for cold water only, and "HOT" and "COLD"

for warm water.

NOTE: Always check fabric labels to ensure that you wash according to the manufacturer's instructions.

Following manufacturer recommendations may help reduce, colour fading, shrinkage etc.

Hot water may result in better washing results than warm or cold water, however, is not suitable for all types of

fabrics and is more costly than warm or cold water. Hot water may be more suited for washing whites and

colour-fast items, and heavily soiled items. Warm water may result in better washing results than cold water,

however, is not suitable for all types of fabrics and is more costly than cold water. Warm water may be more

suited for washing darker coloured items, and moderately soiled items.

Cold water may result in less effective washing than warm or hot water, however, helps minimise wrinkling and

fading, and is least costly. Cold water may be more suited for delicate items, and lightly soiled items. Use cold

water for rinsing.

Step 6: Start the Wash

Close the lid - if not closed, the washing machine will not perform any wash functions. Press START/PAUSE

once. When the wash finishes, the machine buzzes to inform you.

Delaying the Wash Start Time

You can delay the start time of the wash from 2 to 24 hours; for example, to run the machine during lower

electricity cost times of day etc. To do this, set up the wash as per steps 1 to 5 above, however, do NOT press

START/PAUSE. Instead, press and hold WATER LEVEL and WATER SUPPLY simultaneously to activate the

delayed start function - "DELAY START" illuminates on the display "2" shows on the display - this is the number

of hours before the machine will start. Press WATER SUPPLY repeatedly until the required number of hours is

reached. For example, setting the delay start value to "5" means the wash will start in 5 hours.

Changing the Wash Program

You can change the wash program after the machine has started; for example, to adjust water level. To do this,

press START/PAUSE, then make the necessary changes, then press START/PAUSE again to resume washing.

NOTE: Not all functions can be changed once the machine wash has begun.

CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON

7kg Top Load Washing Machine - CSF7G3P and CST7D3P

Maintenance

•Clean the body of the machine with a soft, damp cloth if required. Do not use solvents, abrasives or harsh

detergents.

•Regularly clean the lint filters - at least once per 5 wash cycles. To clean:

a. Press the clip at the top of the lint filter to unlock it from the tub, then swing it out then up to remove it.

b. Open the lint filter and remove any accumulated materials from it, then rinse it thoroughly in clean water.

c. Close the lint filter then insert it into the slot in the tub, bottom first, then push the top in until it clips into

place.

•Periodically clean the inlet hose filters. To clean:

a. Disconnect the machine from the electrical

supply.

b. Turn the hot and cold water supply taps

OFF fully.

c. Unscrew the hot and cold water hose nuts

from the machine.

d. Pull the mesh filter from each hose and

rinse clean. If any debris is caught in the

filter mesh, use an old toothbrush or

similar to help remove it.

e. Insert the filters back into the hoses, then

re-fit the hoses to the machine. Ensure

that hot and cold are connected to the correct fittings on the machine.

•Periodically clean the machine internals using the "tub clean" function.

CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON

7kg Top Load Washing Machine - CSF7G3P and CST7D3P

Troubleshooting

The following information may assist in identifying a problem and rectifying it. For procedures that you are not

comfortable with or have the tools, knowledge or experience for, or if problems persist after following all

suggested actions, contact an authorised service centre or qualified technician.

The machine will not operate

•Is the water supply on?

•Is the machine electrical supply cord plugged into the socket properly?

•Is the electrical supply switched on?

•Is the machine lid closed?

•Is the water level setting adequate for the size of the wash load?

The machine is buzzing and not filling with water

•Is the water supply on?

•Are the inlet hoses kinked or blocked?

•Are the water supply pipes frozen?

The machine is buzzing and not filling with water

•Is the water supply on?

•Are the inlet hoses kinked or blocked?

•Are the water supply pipes frozen?

The rinse or spin or air dry cycle is stopping (usually due to imbalance)

•Are the clothes evenly distributed in the tub?

•Is the machine stable and level?

•Is the machine lid closed?

The rinse or spin or air dry cycle is stopping (usually due to imbalance)

•Are the clothes evenly distributed in the tub?

•Is the machine stable and level?

•Is the machine lid closed?

The washing machine is displaying E9

E9 error relates to the water level in the machine. Kindly check the following as they may resolve the issue:

1. Ensure that when starting a load of washing, you select the appropriate water level, if there is too much

water in the machine during washing, the E9 error will occur. Please try bucketing some of the water out of

the machine as this may correct the E9 error.

2. Ensure that the drain hose is not positioned too high above the machine, the pump may struggle to empty

the water if the water has too high to travel.

3. Check the drain hose for blockages, a blockage would prevent the water from draining.

CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON

7kg Top Load Washing Machine - CSF7G3P and CST7D3P

Error Codes (shown on machine display panel)

E0 - Indicates that the tub has been filled with water for over 20 minutes without the wash cycle being started.

Open and close the lid. Start the wash cycle.

E1 - Indicates a drain hose problem. Ensure the drain hose is not blocked or frozen and is at the correct height.

E2 - Indicates a load imbalance. Distribute the clothes evenly in the tub and ensure the machine is stable and

level.

E3 / E6 - Indicates that the lid is open during the wash. Close the lid.

E4 - Indicates a water level sensor fault. Contact customer service.

E9 - Indicates a water level sensor fault. Please see possible solutions above.

CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON

7kg Top Load Washing Machine - CSF7G3P and CST7D3P

Specifications

CSF7G3P

Colour Platinum

Maximum Capacity 7kg

Rated Capacity 6kg

Power Source 240V 50Hz

Water Protection IPX4

Energy Star Rating 2 stars

Water Star Rating 3 stars

Washing Machine Type Top load

Washing Programs 11 Selections

Display Panel Digital Control Panel

Water Inlets Hot and Cold

Delay Start Yes

Hose Length 1.3m

Note

Power Plug Australian Standard

Note: 1.3m hose is located on the left side of the machine (when looking at it from the front).

CST7D3P

Colour Signature Grey

Maximum Capacity 7kg

Power Source 240V 50Hz

Water Protection IPX4

Energy Star Rating 2 stars

Water Star Rating 3 stars

Washing Machine Type Top load

Washing Programs 8 Selections

Tub Stainless Steel

Display Panel Digital Control Panel

Water Inlets Hot and Cold

Delay Start Yes

Hose Length 2m

Power Plug Australian Standard

Note: 2m hose is located on the left side of the machine (when looking at it from the front)

CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON

Some experts believe that the incorrect or prolonged use of almost any

product may cause serious injury or death. To help reduce your risk of

serious injury or death, refer to the information below. For more information,

see www.datastreamserver.com/safety

Consult all documentation, packaging

and product labelling before use. Note

that some products feature

documentation available online. It is

recommended to print and retain the

documentation.

Before each use, check the product for

loose/broken/damaged/missing parts,

wear or leaks (if applicable). Never use a

product with

loose/broken/damaged/missing parts,

wear or leaks.

Products must be inspected and serviced

(if applicable) by a qualified technician

every 6 months. This is based on

average residential use by persons of

average size and strength, and on a

property of average metropolitan size.

Use beyond these recommendations may

require more frequent

inspections/servicing.

Ensure that all users of the product have

completed a suitable industry recognised

training course before being allowed

access to the product.

The product has been supplied by a general merchandise

retailer that may not be familiar with your specific

application or description of application. Be sure to attain

third-party approval from a qualified specialist for your

application before use, regardless of any assurances from

the retailer or its representatives.

This product is not intended for use where fail-safe

operation is required. As with any product (for example,

automobile, computer, toaster), there is the possibility of

technical issues that may require the repair or

replacement of parts, or the product itself. If the possibility

of such failure and the associated time it may take to

rectify could in any way inconvenience the user, business

or employee, or financially affect the user, business or

employee, then the product is not suitable for your

requirements. This product is not intended for use where

incorrect operation or a failure of any kind, including but

not limited to, a condition requiring product return,

replacement, parts replacement or service by a technician

may cause financial loss, loss of employee time or an

inconvenience requiring compensation.

If this product has been purchased in error when

considering the information presented here, contact the

retailer directly for details of their returns policy, if

required.

diagrams or images may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying, scanning or recording, or any information storage and retrieval system,

without express permission or consent from the publisher.

Carson CSF7G3P User manual

Popular Washer manuals by other brands