Carson Cst9d3p User manual

Model shown is the dark grey version

9kg Top Load Washing Machine

User Manual

[Revision 2.0 May 2019]

READ THIS MANUAL CAREFULLY BEFORE USE – FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY

DAMAGE AND MAY VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by

this manual may vary in appearance, assembly, inclusions, specifications, description and packaging.

9kg Top Load Washing Machine

Safety

Safety messages are designed to alert you to possible dangers or hazards that could cause death,

injury or equipment or property damage if not understood or followed. Safety messages have the

following symbols:

You WILL be KILLED or

SERIOUSLY INJURED if you

do not follow instructions.

You CAN be KILLED or

SERIOUSLY INJURED if you

do not follow instructions.

You CAN be INJURED if you

do not follow instructions or

equipment damage may occur.

It is vital that you read and understand

this user manual before using the product,

including safety warnings, and any

assembly and operating instructions.

Keep the manual for future reference.

Safety precautions and recommendations

detailed here must be fully understood

and followed to reduce the risk of injury,

fire, explosion, electrical hazard, and/or

property damage.

Safety information presented here is

generic in nature – some advice may not

be applicable to every product. The term

"equipment" refers to the product, be it

electrical mains powered, battery powered

or combustion engine powered.

•Before Use - If you are not familiar with

the safe operation/handling of the

equipment or are in any way unsure of

any aspect of suitability or correct use

for your application, you should

complete training conducted by a

person or organization qualified in safe

use and operation of this equipment,

including fuel/electrical handling and

safety.

•Do NOT operate the equipment in

flammable or explosive environments,

such as in the presence of flammable

liquids, gases or dust. The equipment

may create sparks or heat that may

ignite flammable substances.

•Keep clear of moving parts.

•Equipment may be a potential source of

electric shock or injury if misused.

•Do NOT operate the equipment if it is

damaged, malfunctioning or is in an

excessively worn state.

•Do NOT allow others to use the

equipment unless they have read this

manual and are adequately trained.

•Keep packaging away from children -

risk of suffocation! Operators must use

the equipment correctly. When using

the equipment, consider conditions and

pay due care to persons and property.

General Work Area Safety

•Work areas should be clean and well it.

•Do not operate the equipment if

bystanders, animals etc are within

operating range of the equipment or the

general work area.

•If devices are provided for connecting

dust extraction / collection facilities,

ensure these are connected and used

properly. Dust collection can reduce

dust-related hazards.

General Personal Safety

•Wear appropriate protective equipment

when operating, servicing, or when in

the operating area of the equipment to

help protect from eye and ear injury,

poisoning, burns, cutting and crush

injuries. Protective equipment such as

safety goggles, respirators, non-slip

safety footwear, hard hat, hearing

protection etc should be used for

appropriate equipment / conditions.

Other people nearby should also wear

appropriate personal protective

equipment. Do not wear loose clothing

or jewellery, which can be caught in

moving parts. Keep hair and clothing

away from the equipment.

•Stay alert and use common sense

when operating the equipment. Do not

over-reach. Always maintain secure

footing and balance.

•Do not use the equipment if tired or

under the influence of drugs, alcohol or

medication.

•This equipment is not intended for use

by persons with reduced physical,

sensory or mental capabilities.

General Fuel Safety

•Petrol/fuel/gasoline is extremely

flammable – keep clear of naked

flames or other ignition sources.

•Do not spill fuel. If you spill fuel, wipe it

off the equipment immediately – if fuel

gets on your clothing, change clothing.

•Do NOT smoke near fuel or when

refuelling.

•Always shut off the engine before

refuelling.

•Do NOT refuel a hot engine.

•Open the fuel cap carefully to allow any

pressure build-up in the tank to release

slowly.

•Always refuel in well ventilated areas.

•Always check for fuel leakage. If fuel

leakage is found, do not start or run the

engine until all leaks are fixed.

General Carbon-Monoxide Safety

•Using a combustion engine indoors

CAN KILL IN MINUTES. Engine

exhaust contains carbon-monoxide – a

poison you cannot smell or see.

•Use combustion engines OUTSIDE

only, and far away from windows, doors

and vents.

General Equipment Use and Care

•The equipment is designed for

domestic use only.

•Handle the equipment safely and

carefully.

•Before use, inspect the equipment for

misalignment or binding of moving

parts, loose components, damage or

any other condition that may affect its

operation. If damaged, have the

equipment repaired by an authorised

service centre or technician before use.

•Prevent unintentional starting of the

equipment - ensure equipment and

power switches are in the OFF position

before connecting or moving

equipment. Do not carry equipment

with hands or fingers touching any

controls. Remove any tools or other

items that are not a part of the

equipment from it before starting or

switching on.

•Do not force the equipment. Use the

correct equipment for your application.

Equipment will perform better and be

safer when used within its design and

usage parameters.

•Use the equipment and accessories

etc. in accordance with these

instructions, considering working

conditions and the work to be

performed. Using the equipment for

operations different from those

intended could result in hazardous

situations.

•Always keep equipment components

(engines, hoses, handles, controls,

frames, housings, guards etc) and

accessories (cutting tools, nozzles, bits

etc) properly maintained. Keep the

equipment clean and, where applicable,

properly lubricated.

•Store the equipment out of reach of

children or untrained persons. To avoid

burns or fire hazards, let the equipment

cool completely before transporting or

storing. Never place or store the

equipment near flammable materials,

combustible gases or liquids etc.

•The equipment is not weather-proof,

and should not be stored in direct

sunlight, at high ambient temperatures

or locations that are damp or humid.

•Do not clean equipment with solvents,

flammable liquids or harsh abrasives.

•For specific equipment safety use and

care, see Equipment Safety.

9kg Top Load Washing Machine

General Electrical Safety

•Inspect electrical equipment, extension

cords, power bars, and electrical fittings

for damage or wear before each use.

Repair or replace damaged equipment

immediately.

•Ensure all power sources conform to

equipment voltage requirements and

are disconnected before connecting or

disconnecting equipment.

•When wiring electrically powered

equipment, follow all electrical and

safety codes.

•Wherever possible, use a residual

current device (RCD).

•High voltage / high current power lines

may be present. Use extreme caution

to avoid contact or interference with

power lines. Electrical shock can be

fatal.

General Electrical Safety

•Electrically grounded equipment must

have an approved cord and plug and

be connected to a grounded electrical

outlet.

•Do NOT bypass the ON/OFF switch

and operate equipment by connecting

and disconnecting the electrical cord.

•Do NOT use equipment that has

exposed wiring, damaged switches,

covers or guards.

•Do NOT use electrical equipment in wet

conditions or in damp locations.

•Do NOT use electrical cords to lift,

move or carry equipment.

•Do NOT coil or knot electrical cords,

and ensure electrical cords are not trip

hazards.

General Service Information

•The equipment must be serviced or

repaired at authorised service centres

by qualified personnel only.

•Replacement parts must be original

equipment manufacturer (OEM) to

ensure equipment safety is maintained.

•Do NOT attempt any maintenance or

repair work not described in this

manual.

•After use, the equipment and

components may still be hot – allow the

equipment to cool and disconnect spark

plugs and/or electrical power sources

and/or batteries from it before

adjusting, changing accessories or

performing repair or maintenance.

•Do NOT adjust while the equipment is

running.

•Perform service related activities in

suitable conditions, such as a

workshop.

•Replace worn, damaged or missing

warning/safety labels immediately.

Washing Machine Safety

•Do not overload circuits. Do not use an adapter. Do not use an extension cord.

•Do not only hold the cord while pulling out the plug.

•Do not let children play with the machine.

•Do not put hands in the rotating tub.

•Do not clean the body of the washing machine with volatile solvents, such as petrol and methane. Also, do not pour these solvents

into the tub for washing or drying purposes.

•Keep the washing machine away from fire or heat sources.

•Do not expose washing machine to direct sunlight or rain.

•Do not put the washing machine in a damp place and do not pour water onto the control panel.

•Never use water above 65°C.

•Ensure that the lid is closed during the spin cycle.

•The highest point of the drain hose must be between a height of 0.7 – 1.2m above floor level.

•Don't switch ON the power if the water pressure is lower than 0.03Mpa or higher than 0.85MPa.

•This appliance is not intended to be used by young children and people with reduced physical and mental capabilities without close

supervision at all times. Young children should be supervised to ensure that they do not play with the appliance.

•Unplug the power cord after each use.

•Ensure to use low foam powdered laundry detergent.

•If the power cord is damaged, have it replaced by the manufacturer or contact a qualified technician.

•Do not block the ventilation openings at the base of the washing machines. Do not put the appliance on top of a rug or carpet.

9kg Top Load Washing Machine

Safety Symbols

The product may have safety warning labels attached to it, explained below. Understand the symbols

on your product and their meanings. If any stickers become unreadable, unattached etc., replace them.

Flammable Material Hazard

Flammable liquids, gases or

substances etc may present.

Avoid ignition sources and

open flames. Danger of fire.

Read User Manual

Read and fully understand

product safety warnings,

operation, procedures etc

before using the product.

Use Hand Protection

Wear appropriate hand

protection and take due care

as the product or use of the

product may present hand

hazards.

Carbon-Monoxide Hazard

Do not use the product in

confined areas or without

adequate ventilation. Carbon-

monoxide poisoning can be

fatal.

Electrocution / Electrical

Shock Hazard

High voltage or high current

electricity may be present or

required by the product. Take

due care when handling

electrical products, cables,

plugs and leads. Electrical

shock can be fatal.

Toxic Fumes / Dust Hazard

Using the product or by-

products from use may

produce fumes, smoke or

particles that could be harmful

if inhaled. Wear appropriate

breathing protection and have

adequate ventilation.

Explosive Material Hazard

Combustible liquids, gases or

substances etc may be

present. Avoid ignition sources

and open flames. Danger of

explosion.

Cutting / Amputation Hazard

The product may have blades,

edges or mechanical devices

that can cause severe cut

injury to fingers, limbs etc.

Take due care when handling

and using the product.

Crush Hazard

The product may have blades,

edges or mechanical devices

that can cause severe crush

injury to fingers, limbs etc.

Take due care when handling

and using the product.

Single Operator Only

The product must be operated

by a single person only. More

than one person operating the

product may introduce

additional hazards.

Use Face Protection

Wear appropriate full-face

protection and take due care

as the product or use of the

product may present face and

eye hazards.

Use Foot Protection

Wear appropriate foot

protection and take due care

as the product or use of the

product may present foot

hazards.

Use Eye / Ear / Head

Protection

Wear appropriate eye and / or

ear and / or head protection

and take due care as the

product or use of the product

may present eye, hearing and

head hazards.

Running Hazard

Do not run on or near the

product as doing so may

present a fall hazard.

Diving Hazard

Do not dive into the product as

doing so may present a neck /

head injury hazard.

Adult Supervision Required

Always supervise children and

other users of a product to

prevent drowning or injury.

Skin Penetration / Puncture

Hazard

The product may produce

pressure, emit liquids or

objects that can cause severe

injury to fingers, limbs, blood

etc. Take due care when

handling and using the

product.

Hot Surface Hazard

Be aware that the product may

produce high temperatures

and hot surfaces that can

cause burn injuries.

Flying Debris Hazard

Be aware that the product or

use of the product may

present hazards produced by

flying debris. Wear appropriate

clothing and protective

devices.

Moving Parts Hazard

Be aware that the product

contains or uses mechanical

devices that move or rotate.

Always wait for moving parts

to stop fully before handling

the product, adjusting,

maintenance etc.

9kg Top Load Washing Machine

Carbon-Monoxide Hazard

Do not use the product in

confined areas or without

adequate ventilation. Carbon-

monoxide poisoning can be

fatal.

Pull Hazard

Be aware that the product

contains or uses mechanical

devices that can pull in objects

and can cause severe injury to

fingers, limbs etc. Take due

care when handling and using

the product.

Slope / Fall Injury Hazard

Be aware that using the

product on sloping surfaces or

in slippery conditions may

present additional dangers

from falls and contact with

blades, moving parts, hot

surfaces etc.

"Slam Dunk" Warning

Do NOT attempt "slam dunk"

manoeuvres as this may result

in severe injury due to falling,

product breakage or collapse

etc.

Electrocution / Electrical

Shock Hazard - Outdoor

High voltage or high current

electricity may be present or

required by the product. Do

NOT use in rain, damp or wet

conditions. Electrical shock

can be fatal.

Electrocution / Electrical

Shock Hazard - Disconnect

High voltage or high current

electricity may be present or

required by the product.

Always disconnect the product

from the electrical supply

before handling the product,

adjusting, maintenance etc.

Power Line Electrocution

Hazard

High voltage / high current

power lines may be present.

Use extreme caution to avoid

contact or interference with

power lines. Electrical shock

can be fatal.

"Kick-Back" Hazard

High level of "kick-back"

hazard that can cause the

machine to suddenly rotate

towards operator. Kick-back

injury can be fatal.

Winch Operator Position

Hazard

Do NOT stand between winch

and load. Do NOT use winch

to move people.

Winch Lift Hazard

Do NOT LIFT load vertically.

Use machine to PULL only.

Cable Hazard

Ensure that load bearing cable

is not kinked or knotted.

Winch Cable Hazard

Ensure that there is a

minimum number of cable

coils on winching mechanism.

Winch Hook Hazard

Carry hook to load – do NOT

throw or run.

Flash / Blinding Hazard

Wear appropriate eye

protection for welding. Direct

exposure to weld arcs may

cause permanent eye injury.

Laser Hazard

Laser may be in use – do NOT

look directly at laser or allow

others to.

9kg Top Load Washing Machine

Table of Contents

Safety............................................................................................................................................. 2

Safety Symbols ............................................................................................................................................4

Parts Identification........................................................................................................................ 7

Assembly and Set-Up ................................................................................................................... 8

Installing the Noise-proof Plate ....................................................................................................................8

Installing the Washing Machine ...................................................................................................................8

Connecting the Drain Hose ..........................................................................................................................9

Water Supply Requirements ........................................................................................................................9

Connecting the Inlet Hose to a Faucet.........................................................................................................9

Installing and Connecting the Inlet hose ....................................................................................................10

Dismantling the Inlet Hose .........................................................................................................................11

Connecting the Power Cord .......................................................................................................................11

Operation..................................................................................................................................... 12

Control Panel Layout..................................................................................................................................12

Operating the Washing Machine................................................................................................................13

Step 1: Choose a Program ..................................................................................................................14

Step 2: Choose a Function ..................................................................................................................15

Step 3: Choose the Water Level..........................................................................................................15

Step 4: Choose Water Supply .............................................................................................................16

Step 5: Start the Washing Machine .....................................................................................................16

Programs....................................................................................................................................................16

Maintenance ................................................................................................................................ 17

Cleaning the Filter in the Inlet Valve ..........................................................................................................17

Cleaning the Lint Filter ...............................................................................................................................17

General Cleaning .......................................................................................................................................17

Troubleshooting.......................................................................................................................... 18

Specifications ............................................................................................................................. 19

9kg Top Load Washing Machine

Parts Identification

Accessories

CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON

9kg Top Load Washing Machine

Assembly and Set-Up

Installing the Noise-proof Plate

1. Take out the noise-proof plate. 2. The insertion slot is at the front of the base.

3. Insert the noise-proof plate into the base. 4. Lay down the washing machine to its side

and secure the noise-proof plate with two

screws.

Installing the Washing Machine

Install the washing machine on a firm and level surface. Use the level adjustment knob to regulate the

adjustable foot until the washing machine is stable.

Place the washing machine at least 5cm away

from the wall.

Adjusting the adjustable foot: Use the adjustable

foot to level the washing machine with the floor.

1. Turn the nut clockwise to release the screw

adjuster on the foot.

2. Rotate the foot to raise or lower it until it

stands firmly on the ground.

3. Lock the foot in position by turning the nut

anti-clockwise until it comes up against the

bottom of the machine.

CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON

9kg Top Load Washing Machine

Connecting the Drain Hose

Insert the end of the drain hose into the hook shelf and hang the drain hose over a drain outlet (bath

tub, sink, etc.).

The highest point of the drain hose must be within the height of 0.7 – 1.2m above floor

level, otherwise, the washing machine cannot work normally.

Water Supply Requirements

Water Temperature

•Cold: Recommended cold water temperature is 10 - 23.8°C.

•Hot: Recommended hot water temperature is 50 – 60°C.

•Warm: Mixture of hot and cold water (warm water temperature is dependent on the water

temperature and the pressure of both hot and cold water supply lines).

IMPORTANT: Owner should turn OFF water supply whenever there will be an extended

period of non-use.

Water Pressure

Do not operate the washer when the water pressure is lower than 0.03MPa or higher than 0.85MPa to

avoid damaging the inlet system.

Connecting the Inlet Hose to a Faucet

The faucet must be a G3/4" standard screw thread. If not, it is impossible to connect the inlet hose

properly.

Water supply faucets should be readily accessible so that you can turn them OFF when

the washing machine is not being used.

CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON

9kg Top Load Washing Machine

Installing and Connecting the Inlet hose

The washing machine should be connected to the water mains using new hose-sets

supplied with the appliance. Old hose sets should not be reused. Refer to Section on

Water Supply Requirements before connecting water inlet hoses.

About the Faucet

1. Connect the water inlet hose to the connector by turning the connecting nut.

About washing machine

1. If you just have one water supply line (cold or hot water), connect the inlet hose to the cold-water

connector. Do not unscrew the lid of the hot water connector.

In this situation you cannot set wash temperature to WARM OR HOT.

To prevent water leakage, please ensure that the connecting nut is tightened securely. If there is

water leakage, check the nut if it is fitted with a rubber ring.

2. If you have both cold and hot water supplied, connect the inlet hoses by connecting cold with cold

and hot with hot.

Use Teflon tape when connecting the inlet hoses to the tap connections.

3. Unscrew the lid of the hot water connector, and then connect the hot water inlet hoses to the hot

water connector by turning the connecting nut.

CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON

9kg Top Load Washing Machine

Dismantling the Inlet Hose

Dismantling the hose directly may cause water to splash out,

since the water pressure is still high even after the faucet has

been turn OFF, so please take off the hose according to the

following steps:

1. Turn OFF the faucet.

2. Turn ON the power and keep the washing machine in

operation.

3. Turn OFF the power after approximately 5 seconds.

4. Loosen the nuts on both sides of inlet hose.

• If the machine is used frequently, it is unnecessary to take off the inlet hose to avoid

damaging the nut at the elbow. • Always close the tap when unit is not in use.

Connecting the Power Cord

• The socket should have assembled the SA fuse. • Use the three pins socket

where the earth wire is connected. • The earth wire of the washing machine is set

into the plug; don't try to modify it. • The socket should have a reliable earth wire. If there is no

earth wire in the socket, please contact an authorised electrician to assemble one for you. •

Never try to connect the earth wire of the washing machine together with that of a gas or water

pipe, telephone cord or lightning rod. • Do not use a damaged cord because it could cause an

electrical leakage and fire hazards. • In case the cord is damaged, call your local service

company to change it.

CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON

9kg Top Load Washing Machine

Operation

Control Panel Layout

1. Water Supply Selector/Air Dry: Press this button to select water temperature or the time of air dry.

2. Water Level Button: Press this button to select water level.

3. Process Button: Press this button to select the process you need.

4. Delay Start Pre-set Button: Hold the Water Level Button, then press this button. Water supply can

be set up into the reservation status time of delayed start.

5. Program Button: Press this button to select the program you need.

6. Start/Pause Button: Press this button to start/pause the washing machine.

7. Power Button: Press this button to turn ON/OFF the washing machine. Do not turn ON the

washing machine again until 3 minutes later after it is turned OFF. The washing machine will turn

OFF at once automatically when the program is finished, and it will turn OFF automatically if you do

not press the Start Button to start the machine within 10 minutes after pressing the Power Button.

We recommend using Standard Program, Water Supply: Cold & Hot, Water Level: 8 for a normally

soiled 9kg load.

CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON

9kg Top Load Washing Machine

Operating the Washing Machine

Before adding clothes to the washing machine, always empty garment pockets of coins

and other materials to avoid damaging the washing machine and voiding your warranty.

1. Connect the water inlet hose to the water

faucet.

2. Turn ON the water faucet.

3. Plug in the power cord.

4. Insert the end of the drain hose into the hook

shelf and hang the drain hose over a drain

outlet.

5. Put a suitable wash load in the inner tub.

6. Add a suitable detergent, according to the

wash load volume, into the detergent box.

7. Close the lid or the washing machine will not

operate. DO NOT FORCE THE LID TO

CLOSE, as the soft close operation will be

damaged.

CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON

9kg Top Load Washing Machine

Step 1: Choose a Program

Buttons can be freely selected with the program QUICK STANDARD TUB CLEANAIR DRY with several

automatic procedures.

The time duration of

Air-Dry Mode can be

selected by pressing

this button after

choosing a program.

Detergent and Softener Dispensers

1. Pull out the detergent box.

2. Add a suitable quantity detergent into the detergent dispenser.

3. Add a suitable quantity fabric softener into the softener dispenser before washing.

4. Push the detergent box in completely.

Water

Level

Detergent

Dosage (g)

7 – 8 80 – 100

5 – 6 70 – 80

3 – 4 50 – 70

1 – 2 45 – 50

• Dilute concentrated detergent with three times the amount of water. • If detergent is

needed, do not open the wash lid when spinning, otherwise the softener will be

prematurely dispensed, and the result will be worse.

CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON

9kg Top Load Washing Machine

Softener for Laundry

• Inject softener into the softener dispenser before washing. At the last rinse cycle, the

softener will be added in automatically. • Dilute concentrated softener with three times

the amount of water. • If softener is needed, do not open the wash lid when spinning, otherwise

the softener will be prematurely used, and the result will be worse.

Water

Level

Softener Dosage

Normal Concentrated

1 – 2 14 5

3 – 4 20 7

5 – 6 25 10

7 – 8 30 13

Step 2: Choose a Function

Press the Process button to choose a function you would like.

Step 3: Choose the Water Level

Press the Water Level button to choose an appropriate water level according to the load quantity and

the corresponding indicator light will blink.

CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON

9kg Top Load Washing Machine

Step 4: Choose Water Supply

Press the Water Supply button to choose cold, warm or hot water.

•Hot Water: Hot water can result in better cleaning effects. But it is not

suitable for all clothing articles. It is best for washing whites and coloured,

heavily soiled clothes and diapers.

•Warm Water: Warm water can reduce the chance of colour fading.

Suitable for washing light, moderately soiled clothes, dark coloured

clothes, silks, woollens, nylon, and acrylic.

•Cold Water: Cold water is less effective in cleaning compared to hot or

warm water, but it does minimise wrinkling and fading. Use it for washing

extra sensitive clothes and for rinsing.

• The washing machine will provide a cold rinse in all Temperature settings. • There is no

heating function in the washing machine. A single hose system does not allow the

washing machine to automatically choose and/or regulate incoming water temperatures to

match those listed on the control panel such as Warm or Hot.

Step 5: Start the Washing Machine

Pre-set function can finish the program after some short delay.

1. After choosing a program, press the" Pre-set" button continuously (before pressing the

"Start/Pause" button). The digital indicator will indicate the desired time to finish the wash.

Example: If the pre-set time is 5 hours, press the button until the digital indicator displays 5.

2. Press the "Start/Pause" button, the washing machine will buzz and run automatically. Close the lid,

or the washing machine will not operate.

•If you want to change the program when the washing machine is running, you must

press the "Start/Pause" button to pause the washing machine.

The water level can be changed when the washing machine is running. If you change the water level to

a higher one, the washing machine will stop running and to add more water to match the level you

chose. Afterwards, it will automatically resume washing again.

Programs

Microcomputer controlled board assembly saves up to 8 kinds of washing programs Please refer to the

following washing program table:

Soak

(mins.)

Wash

(mins.)

Rinse

(mins.)

Spin

(mins.)

Fuzzy Select the time according to the quantity and

quality of the laundry.

Standard 15 12 15 6

Quick - 9 6 4

• The total operating time may vary according to water volume; tolerance is permitted. •

ln case laundry imbalance triggers the safety switch when spinning, the washing

machine will automatically release water to adjust the balance.

CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON

9kg Top Load Washing Machine

Maintenance

Cleaning the Filter in the Inlet Valve

Clean the filter in the inlet valve regularly to prevent it from clogging.

1. Unplug the power cod first. 2. Take off the inlet hose and

clean the filter with a brush.

Cleaning the Lint Filter

1. Pull out the lint

filter as per the

directional arrow

shown above.

2. Open the lint filter and

clean/rinse it

thoroughly. Afterwards,

close it back.

3. Reinstall the lint

filter as per the

directional arrow

shown above.

General Cleaning

•Clean the surface of the washing machine with a soft cloth regularly.

•After each wash, clean the inner tub to avoid forming deposits at the bottom.

CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON

9kg Top Load Washing Machine

Troubleshooting

Problem and Error Code Possible Causes Possible Solutions

Unable to drain

If draining time exceeds 10

minutes, the washing machine will

buzz and display the E1 error code.

Is the drain hose properly

placed from 0.7 - 1.2m above

floor level?

Is there something blocking the

drain hose?

Re-position the drain hose

properly, according to the

recommended height

requirements.

Remove the blockade from the

drain hose.

Spin Malfunction

If the washing machine won’t spin

after draining, it will buzz and

display the E3 error code.

Is the lid closed completely?

Close the lid.

Contact a qualified technician

to check if the safety switch is

damaged.

Unable to Spin

The washing machine will attempt

to spin 3 times. If still unsuccessful,

it will buzz and display the E2 error

code.

Is the washing load uneven?

Is the washing machine placed

on an uneven or unstable

surface?

Re-distribute or lessen the

washing load.

Transfer the washing machine

to a more secure and stable

surface.

Contact a qualified technician

to check if the safety switch is

damaged.

Failed to Fill with Water

When water filling time exceeds 20

minutes, the washing machine will

buzz and display the E0 error code.

Is the tap turned OFF?

No water coming out?

Is the water flow too slow?

Is the filter in the tap connector

or inlet valve being blocked?

Turn the tap back ON.

Wait for the water to come

back.

Clean/Replace filter.

Contact a qualified technician

to check if the safety switch is

damaged.

When the Start/Stop button is

pressed, the washing machine will

buzz for about 10 seconds and

display the E4 error code.

Contact a qualified technician

to check if the connection of

the water level sensor has

been loosened or damaged.

• If you open the lid while the washing machine is running, all functions will stop, but

water will keep flowing. To resume operation, just gently close the lid. • Please turn OFF

the washing machine first if it buzzes and try to find and solve the problems yourself if you have

the skills. Otherwise, it is better to contact a qualified technician. • Cut-off the power supply if

there is a strange noise, burning smell or smog and contact a qualified technician to perform an

inspection on the washing machine.

CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON

9kg Top Load Washing Machine

Specifications

Model CST9D3P

Max. Capacity 9.0kg

Washer Power 420w

Spin Power 420w

Motor Rating 180w

Spin Speed 740rpm

Torque ≥1.82

Capacitor 13uf

Cabinet Material PCM

Inner Tub Material Stainless steel

CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON

Some experts believe that the incorrect or prolonged use of almost any

product may cause serious injury or death. To help reduce your risk of

serious injury or death, refer to the information below. For more information,

see www.datastreamserver.com/safety

Consult all documentation, packaging

and product labelling before use. Note

that some products feature

documentation available online. It is

recommended to print and retain the

documentation.

Before each use, check the product for

loose/broken/damaged/missing parts,

wear or leaks (if applicable). Never use a

product with

loose/broken/damaged/missing parts,

wear or leaks.

Products must be inspected and serviced

(if applicable) by a qualified technician

every 6 months. This is based on

average residential use by persons of

average size and strength, and on a

property of average metropolitan size.

Use beyond these recommendations may

require more frequent

inspections/servicing.

Ensure that all users of the product have

completed a suitable industry recognised

training course before being allowed

access to the product.

The product has been supplied by a general merchandise

retailer that may not be familiar with your specific

application or description of application. Be sure to attain

third-party approval from a qualified specialist for your

application before use, regardless of any assurances from

the retailer or its representatives.

This product is not intended for use where fail-safe

operation is required. As with any product (for example,

automobile, computer, toaster), there is the possibility of

technical issues that may require the repair or

replacement of parts, or the product itself. If the possibility

of such failure and the associated time it may take to

rectify could in any way inconvenience the user, business

or employee, or financially affect the user, business or

employee, then the product is not suitable for your

requirements. This product is not intended for use where

incorrect operation or a failure of any kind, including but

not limited to, a condition requiring product return,

replacement, parts replacement or service by a technician

may cause financial loss, loss of employee time or an

inconvenience requiring compensation.

If this product has been purchased in error when

considering the information presented here, contact the

retailer directly for details of their returns policy, if

required.

diagrams or images may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying, scanning or recording, or any information storage and retrieval system,

without express permission or consent from the publisher.

Carson CST9D3P User manual

Popular Washer manuals by other brands