
4 5
1. IntroduCtIon
The correct and safe use of this Pedestal is only guaranteed if it is used in accordance with the following
manual and other documentaon that accompanies the P70 PLUS Pedestal. It is therefore essenal to
read all the documentaon carefully and to keep it in a safe place.
Although the equipment features safety devices not all the risks inherent its improper use can be avoided.
It is necessary to always make sure that all operators have completely read and understood the instruc-
ons. CARTONI S.p.A. accepts no responsibility for damage to persons and/or property consequent to
the improper use of the Pedestal.
Do not remove or deface any label, indicaon and warning axed to the Pedestal.
CARTONI S.p.A. declines all responsibility for the failure to observe the standards of safety and preven-
on detailed in the various secons of this manual and for injuries caused due to improper use.
Any modicaon to the Pedestal must have prior authorizaon by CARTONI S.p.A.
All the standard maintenance operaons (maintenance, repairs, cleaning and adjustments) should be
carried out by competent personnel as prescribed in the manual.
1.1 ProPer use
The Pedestal has been designed and built for the support and movement of a Head with Camera/lenses
mounted on its horizontal and vercal axis.
In parcular this manual refers to the machine specicaons in secon 2.
! It is strictly forbidden to use the Pedestal in any other way other than indicated.
! The components used must conform to the indicaons in secon 2.
! Do not remove or deface any label, indicaon or warning axed to the machine.
! Any modicaon to the Pedestal and/or its structure and/or accessories must have
prior authorizaon by CARTONI S.p.A.
! Before using this Pedestal the manual should be read carefully. Whoever uses the ma-
chine must be well informed on the operave capacity and limits outlined in the manual.
1.2 Warranty
The P70 PLUS Pedestal is covered by a warranty against manufacturing defects for 5 years from the date
of shipment (three years basic warranty + two years upon online registraon to www.cartoni.com).
The warranty covers replacement of any defecve part and the labour required excluding transport/duty costs.
In the case of replacement of single parts, these can be supplied free of charge by CARTONI S.p.A. but
the owner will bear the cost of transport/duty charges for the parts.
The warranty is only valid if the Pedestal has been used properly as outlined in the manufacturer’s instruc-
ons and has not been exposed to any mishandling. The warranty will be immediately invalid if modica-
ons and/or repairs are carried out by unauthorized persons otherwise authorized by CARTONI S.p.A.
Components subject to wear and tear are not covered by the warranty.
The warranty is also invalidated by one of the following events:
• Failure to comply with payment condions
• Failure to carry out appropriate maintenance
• Removal or mistreatment of marks and/or labels containing data and technical specicaon.
CARTONI S.p.A. accepts no responsibility for damage to the Pedestal caused by improper use or the
malfuncon of other equipment connected to the Camera support.
In any case, the warranty only covers Pedestal damage and/or malfuncons and does not entle the
purchaser/owner to claim any damages for loss of producon me due to assumed or proven damage
caused by and/or connected to the Pedestal itself.
1.3 authorIzed Personnel
Extraordinary maintenance and repairs to the machine can only be carried out by competent persons
who are either employed, trained or authorized by CARTONI S.p.A. in wring.
Any informaon regarding repair/maintenance service staons can be obtained from CARTONI S.p.A.
1.4 regulatory InformatIon
The design and construcon of the Pedestal by CARTONI S.p.A. complies with the regulaons listed
below:
• UNI EN ISO 12100 (2010) Safety of machinery - General principles for design – Risk assesment
and risk reducon
• Direcve 2006/42/CE Covering the harmonizaon of member States’ laws on machinery
• Presidenal Decree 17/2010 of 27/01/2010: Regulaon implemenng EU direcve 2006/42/
CE and subsequent amendments
Addional technical standards relang to specic safety measures as the UNI EN ISO 13857:2020 con-
cerning safety distance and the UNI EN ISO 13850:2015 concerning the emergency machine stop have
been considered.