---CARVER----------------------------------
~
RISK
OF
ELECTRIC
SHOCK1'
t
in.
DO NOT OPEN
~
in.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
The lightning flash with arrowhead symbol
within an equilateral triangle is intended to alert
the user
to
the presence of uninsulated
"dangerous voltage" within the product's
enclosure, that may be
of
sufficient magnitude
to constitute arisk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user of the
presence of important operating and main-
tenance (servicing) instructions
in
the literature
accompanying the appliance.
Safety
Instructions
CARVER
Carts and stands -The
Component should be used
only with acart or stand
that
is
recommended by
the manufacturer.
AComponent and cart
combination should be
moved with care. Quick
stops, excessive force, and
uneven surfaces may cause
the Component and cart
combination to overturn.
PORTABLE CART WARNING
10.
Cleaning
-The Component should be cleaned only as
recommended in this manual.
11.
Non-use
Periods-The
powercord
ofthe
Component
should be unplugged from the outletwhen unusedforalong
period
of
time.
12.
Object
and
Liquid
Entry
-Care should be taken
so
that
objects
do
not fall into and liquids are not spilled into the inside
ofthe
Component.
13. Damage Requiring Service-The Component should be
servicedonlybyqualifiedservicepersonnelwhen:
A. Thepower-supplycord ortheplug hasbeen damaged; or
B. Objects have fallen, orliquid has spilled into the
Component;or
C.
The
Componenthas been exposed to rain; or
D.
The
Componentdoes notappearto operate normally
or
exhibits amarked change
in
performance; or
E.
TheComponent
has
beendropped, or
its
cabinetdamaged.
14.
Servicing
-The usershould not attemptto service the
Componentbeyond those meansdescribed in this operating
manual. All otherservicing should be referred to qualified
servicepersonnel.
9.
Power
Cord
Protection -Power-supply cords
should
be
routed sothat they are not likely to be walked
upon orpinched by items placed upon oragainstthem,
paying particularattention tocords atplugs, convenience
receptacles, and the pointwhere they exit the Compo-
nent.
6.
Ventilation
-The Component should be situated
so
that its location orposition does not interfere with
itsproperventilation. Forexample, theComponent
should not be situated on abed, sofa, rug, orsimilar
surfacethat may block anyventilation openings; or
placed
in
abuilt-in installation such as abookcase or
cabinetthatmayimpedethe flow ofairthrough ventila-
tionopenings.
7.
Heat
-The Componentshould be situated away
from heat sources such as radiators,
or
otherdevices
which produceheat.
8.
Power
Sources-The Componentshould be
connected to apowersupplyonly ofthe type described
in
these operation instructions oras marked
on
the Compo-
nent.
1. Read
Instructions
--
All the safety and operation
instructionsshould be read beforetheCarverCompo-
nentisoperated.
2.
Retain
Instructions
-The safetyand operating
instructionsshould be keptforfuture reference.
3.
Heed
Warnings
-All warnings on the Component
and in these operating instructions should be followed.
4.
Follow
Instructions
-All operating and other
instructionsshould befollowed.
5.
Water
and
Moisture
-The Component should not
be
used nearwater-for example, near abathtub,
washbowl, kitchen sink, laundry tub, in awet base-
ment, or nearaswimming pool, etc.
E:\
Safety
Instructions
Wf.--------
