CARVIN EM900 User manual

AUX SEND 2
In-Ear Monitor Setup Guide
For use when the venue will be running the
band’s in-ear monitor mixes via four separate
AUX SENDS from the venue house system.
These settings are only suggestions.
Carvin EM900
AUX SEND 1
AUX SEND 4 AUX SEND 3
KerryPaul
LanceMad Dog

In-Ear Mixer Faders AUX 1: Kerry (lead vocals) In-Ear Mixer Faders AUX 2: Paul (guitar)
Basic Mix/Fader Settings for Each Band Member Page 1
Kerry (lead vocals) Paul (guitar)
NOTE: This guide is for the in-ear mix ONLY. NOT front-of-house!

In-Ear Mixer Faders AUX 3: Lance (bass) In-Ear Mixer Faders AUX 4: Mad Dog (drums)
Basic Mix/Fader Settings for Each Band Member (cont.) Page 2
Lance (bass) Mad Dog (drums)

EQ Settings for Each Channel Page 3
Kick
Snare
Tom
Lead
Vocal
Guitar
Vocal
Bass
Vocal
Drum
Vocal
Upright
Bass

EQ Settings for Each Channel (cont.) Page 4
Compressor Settings for Some Channels NOTE: Most channels have NO compression.
Guitar Room
Kick
Drum
Snare
Drum
Upright
Bass
Reverb Settings for Some Channels
NOTE: Light reverb on 4 vocals channels and a bit on the snare.
Enough to make the in-ear mix sound “fun” and not bone
dry :).