CarVision CV-043ABM User manual

High brightness mirror monitor
User manual
CV-043ADM CV-043ABM
E
13

Product intruction
Installation and wire
Basic functions
Optional functions
Table of contents
Chapter One: Product introduction .......................2
Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Chapter Two: Installation and wire ..........................3
Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
How to install high brightness mirror monitor . . . . . . . . . . . . . . 5
Special bracket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
How to install reverse camera . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
How to wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Chapter Three: Basic functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Back up camera display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Brightness adjust automatically. . . . . . . . . . . . . . . . . . . . . . . . . . 9
Glass and bracket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Chapter Four: Optional functions. . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Adjustable guide line ...............................11
Dimming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Chapter one: Introduction
User's Manual
Welcome to use our high brightness Rearview mirror monitor
●We reserve the final explanaon right on this User's Manual.
●Specificaons are subject to change without noce. Sorry for any inconvenience
caused!
●Please make a copy of the important data. We assume no responsibility for the
data loss.
●This manual has been carefully checked. Please contact our service center when
any typing mistake is found.
●Please read the operang instrucon carefully and use the accessories only
provided by the original factory to avoid any unexpected damage. No warranty will
be executed if you are not following the instrucon or connecng with the
incompable accessories, we assume no responsibility for any loss and damage
caused hereby.
●Users can update and upgrade soware from website at his/her opon.
●Any discrepancy between the pictures with real products hereinaer, the real one
prevails.
The packing box contains the following accessories, please confirm:
Rearview mirror monitor
wire rod
User's manual
wire cover
remote control(opon)
For the items listed above, please confirm the actual products. If any damage,
Please contact with the distributor or the agent as soon as possible.
Package
2
1
Specification
Screen
Size
Model number Color
Depth
Working
Voltage
Video
Input
Signal
System
Display
Screen
Aspect
Resolution
CV-043ADM 4.3” TFT-
LCD
480(H)
×272(V) 16 : 9 DC 12V
VIDEO-IN to GPS
/DVD (default)
CAMERA to
backup camera.
PAL/
AUTO/
NSTC
4.3” TFT-
LCD
480(H)
×272(V) 16 : 9 DC 12V
VIDEO-IN to GPS
/DVD (default)
CAMERA to
backup camera.
PAL/
AUTO/
NSTC
CV-043ABM
Product intruction
Installation and wire
Basic functions
Introduction
Features
Back up camera display
Automacally brightness adjustable
4.0mm glass and 23mm OEM bracket
Adjustable guide line (opon)
Compass and temperature (opon)
Parking sensor (opon)
Manual dimming (opon)
Auto dimming (opon)
Optional functions

4
3
V1/V2
MENU
CV-043ABM
CV-043ADM
Chapter two: Installation and wire
Keyboard
The V1/V2 button can switch the 2 video signal input, Press
it can switch back and forth between the two video signals.
Up
Press the menu, which can adjust the brightness, contrast,
color saturation of the screen, language of the system, and
can switch on/off adjustable guide lines. All the default
parameters are 50, you can adjust the parameters through
the up and down buttons according to your preference.
Down
Turn on/off the screen
The menu tabs will automatically be hidden in 10seconds and lighted up again as
soon as you press the touch buttons
5
7
1
1
2 3 4
5
6
7
8
9
6
8
9
No. Descrion
1
2
4.3 High brightness display screen
Light sensor
4
Mirror without auto-dimming funcon: When the screen
turns off or doesn't have video signal, the indicator light will
light up, conversely, it turn off .
Mirror with auto-dimming funcon: when the auto-dimming
acvated, the indicator light will become light; conversely,
it will turn off.
3
Mirror without auto-dimming funcon:
video input: turn on/off the screen
camera input: adjust the brightness of the screen image
Mirror with auto-dimming funcon:
Video input: short press to turn on-off auto-dimming
long press to turn on-off the screen.
camera input: adjust brightness of the screen image
Product intruction
Installation and wire
Basic functions
Keyboard
Optional functions

Remove the original mirror
1 2
Different cars have different brackets, depending on your vehicle make
and manufacturer.
There are many methods for removing the original rear-view mirror, however
please don’t force the mirror off the bracket. The
manufacturer will not be responsible for damage caused to your vehicle as a result
of installation of this mirror monitor.
This pack includes a number of multi brackets and options to assist you with the
installation of the new mirror.
1
5
3
4 6
2
Install mirror monitor on the base
1
We have many kinds of brackets are suitable for your car, and we are not going
to go through anymore examples of that because the space is limited.
If you don’t find the same picture of the bracket here as your car, please contact
us.
Rearview mirror monitor
1BAM 2XX
camera License Plate
General installation location
When a camera is to be installed at the rear of vehicle, a good position is usually
at the top of the License plate where there is an under ledge.
How to install high brightness mirror monitor Special bracket
How to Install Reverse Camera ( Optional – Not included )
6
5
Product intruction
Installation and wire
Basic functions
Installation
Optional functions

After the mirror is mounted, you need to run the cable along the roof lining and
down the pillar so you can connect to Power and the rear view camera
13
5
7
8
2
4
6
Video in
Green backup signal line
5
6
7
8
9
3
Camera(Not Included)
8
9
23
4
5
6
78
57
7
3
rearview mirror monitor mirror monitor cable Extension cable
3
1
5
9
Camera (not included)
9
How to wire
3
4
5 5
6
8
8
7
Product intruction
Installation and wire
Basic functions
Installation
8
7.5
Optional functions

Chapter Three: Basic functions
3.1 Back up camera dispaly
When the car is in reverse, the monitor will automacally display backup camera.
reverse gear
others gear
automacally display
3.2 Brightness adjust automatically
Strong light
weak light
automacally brightness adjust
9
3.2.1 The screen brightness adjust automatically
The brightness of the green indicator light can vary with ambient light.
Strong light
weak light
automacally brightness adjust
3.2.2 The indicator automatically brightness adjust
3.3 Glass and bracket
The thickness of our mirror’s glass is 4mm. It is strong enough to bear impact
and reach every country’s safety standards on rearview mirror
4.0mm
OEM bracket for special rearview mirror monitor with thick pipe is 23mm.
23mm
∮
The brightness of screen vary with ambient light, thereby, to make driver gets
a clear and comfortable image when reversing.
Product intruction
Installation and wire
Basic functions
10
Basic functions
Optional functions

Generally, to help drivers estimate the distance from obstacles, there are
three lines for reference -red, yellow and green. Those three lines are
displayed on the monitor when car is reversing. The green line is 3m from the
back of car and the yellow line is 2m. The distant red line is 1m from the
backside of car while the closed red line is 0.4m. Both reference lines on the
left and right should leave 0.2m space from the car.
20CM20CM
4.1.3 How to Adjust the guide line
According to the site of standard reference line, we can put reference objects
such as desks in the back area of car. Compared with the marked reference
objects, we can adjust the sites and angle of two guide lines displayed on the
monitor. You will get the accurate and safety guide lines once they coincide with
the reference objects.
Long press seng buon is to enter into “guide line adjustment” mode. The
upper half of the remote is to adjust le guide line while the boom half of the
remote is to adjust the right one. The up, down, le and right buons are to
adjust the locaon of guide lines. The clockwise rotaon contra rotaon buons
are to adjust the angle of guide lines. It is easy to operate and calibrate.
Chapter Three: Optional functions
4.1.1 About guide line
Regular guide line is fixed. But installation sites of cameras are different as
well as car size. The fixed guide line is not accurate enough for drivers.
There will be a great difference between regular and fixed guide lines and
car's real guide lines, especially when camera is mounted on the left or
right side of car backside. It may cause accidents.
4.1.2 What the regular guide line is
POWER
LEFT
RIGHT
Check Surrounding for safety
Long press to set guide line
MENU UP
REC
DOWNMODE
POWER
LEFT
RIGHT
Check Surrounding for safety
Long press to set guide line
MENU UP
REC
DOWNMODE
Leguideline rotaon Rightguideline rotaon
Leguideline move Rightguideline move
4.1 Adjustable guide line
Product intruction
Installation and wire
Basic functions
1211
Adjustable guide line (option)
Optional functions

4.4 Dimming Functions(ONLY CV-043ADM INCLUDES )
4.4.1 Why need dimming function
● To protect drivers from the nighttime headlight glare.
● It is a function that can improve the car safety level
● It may cause some subsequent legal disputes once removed by car dealers or sellers
4.4.2 manual dimming
The interior rearview mirror will reflect the glare of rearward-approaching vehicles
and it shine to driver's eyes when driving at night, which would cause a serious crisis.
While the manual dimming rearview mirror comes with special glass and rotating
device, when the strong light comes from the back of the car, the driver only need to
rotate it to another angle, that is, strong light will reflected to another area which
ensures the safe driving at night.
mirror plane (high reflectivity)
glass surface(low reflectivity)
the reflectivity of glass surface is much lower than mirror plane
4.4.2 Auto dimming
The auto-dimming of our mirror works automatically when you start the
engine, then the indicator light also lights. The light sensor in the back of the
rearview mirror will always detect the ambient light. The auto-dimming
doesn't work in the broad day for the adequate daylight. However, when night
falls and the ambient light is below 5lux, the auto-dimming starts to work and
automatically dims to eliminate the glare of rearward-approaching vehicles.
Furthermore, the degree of brightness of the auto-dimming glass depends on
the level of the light. The stronger the light from the back of the car is, the
darker the glass is. Hence it protects drivers from becoming dizzy and avoids
car accident.
Auto-dimming working state
Auto-dimming bleaching state
mirror plane (high reflectivity)
glass surface(low reflectivity)
when driving car at daytime.
the image from the backside
car is the reflect image of the
mirror , which is the same
principle of cosmetic mirror.
when driving at night,there is strong light
from rearward-approaching vehicles, the
driver can rotate the manual shank to
another angle, that is, strong light will
reflected to another area . At this monent,
the image from backside car is the
reflectance of glass surface.
the light sensor from the back of
mirror detects the ambient light
front light sensor detects the light
from rearward-approaching vehicles.
manual-dimming working state
manual-dimming bleaching state
Product intruction
Installation and wire
Basic functions
1413
Dimming (option)
Optional functions