CAS Systems TT-WIS Installation instructions

TT-WIS
Web Interface Server
Installation/Operation Instructions
General Information
Please read these instructions and keep them in a safe place. These
instructions must be followed carefully to ensure proper operation.
Web Interface Server (TT-WIS) module provides a convenient way
for people to know the real-time status of the site through internet
(TCP/IP). It has been designed for use with TraceTek TTSIM-2 /
TTSIM-1A / TTSIM-1 by using RS485 MODBUS communication.
All connected TTSIM-2 / TTSIM-1A / TTSIM-1 data will be accessed
via web browser. In all cases, each WIS offers the following list of
features and specification.
90 mm
(3.54”)
57 mm
(2.24”)
35 mm
(1.38”)
Using two wires for RS485 MODBUS communication
TT-WIS
Product Information
General Features
Number of TTSIM Units Supported
Weight
Network Communication
Visual Indicator
Ethernet
Ethernet Connector
Built-in Clock
Built-in Web Server
Power Requirement
Power Consumption
Power Connection
Mounting Method
Reset to Factory Default
Locate Point of Leakage
Browser Support
Language Support
DHCP Support
Static IP Address
Real-time Status
Email Alert
Number of Email Contact
History Log
Max. History Log Record
History Log Export
History Log Export Format
Login Protection
At Least 4
200 g
Serial RS485, TCP/IP
LED (Power, Serial RS485, Ethernet)
10 Mbps
RJ-45
Yes
Yes
12Vdc ± 3V
Max. 3W
Wire Terminal
Case Mount (TTSIM-BBC),
DIN-Rail Mount, Wall Mount
Support
Support
Internet Explorer 8, Firefox 4,
Safari 5, Chrome 5 or above
English, Simplified Chinese,
Traditional Chinese
Yes
Yes
Yes
Yes (via External SMTP Server)
4
Yes (with Time Stamp)
64
Yes
XML, HTML
Password Required
Web Server
Figure 1. Schematic Diagram of the TT-WIS

Mounting the TT-WIS inside the TT-BBC Case
Installing the TT-WIS
Loosen the two screws on TT-WIS as shown in Figure 2
Attach the TT-WIS to the top right hand corner of the TT-BBC
(Figure 3), case and tighten the two screws at the back of the
TT-BBC case
Figure 3. Top View
of TT-BBC Case
Figure 2. Side View
of TT-WIS
Mounting the TT-WIS on the Wall
Attach the Wall Mount Bracket to the back
of the TT-WIS and tighten the screws
Attach the unit to the wall and tighten the
screws
Mounting the TT-WIS onto the DIN-Rail
Attach the DIN-Rail Mount Bracket (Figure 4) to the
back or to one of the two sides of the TT-WIS and
tighten the four screws
Attach the unit to the 35 mm DIN-Rail (Figure 5)
Figure 6. DIN-Rail
Mount Bracket
Figure 7. Mounting TT-WIS onto
the DIN-Rail
Connections for Power and Telemetry
8
1 2 3 4
5
6
7
9
No.
1
2
3
4
5
6
7
8
9
Item
12V DC Input +
12V DC Input -
RS485 +
RS485 -
Power LED (Green)
RS485 Data Transfer LED (Blue)
RS485 Data Receive LED (White)
Ethernet Jack (LED x 2)
Factory Reset Button
Indicator
Power LED (Green)
RS485 Data
Transmit LED (Blue)
RS485 Data
Receive LED (White)
Ethernet Jack
(LED x 2)
Description
A constant light indicates the power is on
A blinking light indicates transmit of
data during boot up and successful
communication with TTSIM
A blinking light indicates transmit of
data after successful communication
with TTSIM
A green light indicates that TT-WIS is
connected successfully and remains
power on
A blinking light indicates that TT-WIS is
communicating with other devices
Reset TT-WIS to Factory Default
If the TT-WIS cannot be accessed or if you lose your password, please follow the steps below:
1. Power off the TT-WIS
2. Press and hold the Reset button
3. Power on the TT-WIS
4. Release the Reset button after 10 seconds (Make sure the Power LED blinked once)
Remark:
Only the settings of System Setup will be restored to factory default, Email Setup and History Log will not be affected.
TTSIM-WIS/4 Web Interface Server Installation/Operation
2
Figure 4. Wall Mount
Bracket
Figure 5. Mounting
TT-WIS onto the Wall
Mount Bracket

Viewing Status and Programming
Operating Instructions
There are four selectable items in this page: Status, History Log, System Setup and Email Setup.
(Default Fixed IP Address: 192.168.1.254)
Figure 8. Status Page
Status
Attach the Wall Mount Brackets to the two sides of the
TTSIM-WIS/4 and tighten the screws
Attach the unit to the wall and tighten the screws
History Log
Status Color
Normal Green
Leak Red
Cable Break Orange
Communication Error Yellow
The Status page shows the real-time
status of connected TTSIM devices
with the WIS internal clock. This page
refreshes every 5 seconds automatically
(Browser Support: Internet Explorer 8,
Firefox 4, Safari 5, Chrome 5 or above).
The TTSIM address (Slave ID), total
length and leak location are shown in
this page. There are four types of
alarm status
The TTSIM-WIS/4 stores history log internally with non-volatile memory,
activities such as Alarm, System Started, Mail Sent, etc. All history log is
time stamped (24-hour time) with specified address and event. User can
export XML, HTML format file to keep the record. It can store up to 64 records.
TT-WIS Web Interface Server Installation/Operation
3
Figure 9. History Log Page
[email protected]
Copyright © 2010-2017
[email protected]
Copyright © 2010-2017

CAS Systems Limited
Unit 7A, 7/F, Metex House,
28 Fui Yiu Kok Street,
Tsuen Wan, N.T. Hong Kong
Tel: [phone]
Fax: [phone]
[e-mail]
www.CASsystems.com
Master TraceTek Distributor
Important:
All information, including illustrations, is believed to be reliable. Users, however should independently
evaluate the suitability of each product for their particular application. CAS Systems Limited makes no
warranty as to the accuracy or completeness of the information, and disclaims any liability regarding
its use. CAS Systems Limited only obligations are those in the Terms and Conditions of Sales for this
product, and in no case will CAS Systems Limited or its distributors be liable for any incidental, indirect,
or consequential damages arising from the sale, resale, use, or misuse of the product. Specifications
are subject to change without notice. In addition, CAS Systems Limited reserves the right to make
changes - without notification to Buyer - to processing or materials that do not affect compliance with
any applicable specification.
All trademarks set forth herein are owned by their respective owners and all rights reserved.
System Setup
Login is required for the System Setup page. It is used to describe and configure the WIS network. The content
of the Unit Name, Location and Description field will be displayed at the top of each page. The TTSIM-WIS/4
also supports DHCP function and Static IP function. If the IP address is lost, the device can be found by the
Microchip Ethernet Device Discoverer.
Figure 10. System Setup
Changing the Admin Password
For security concern, user is strongly advised to
change the default password. Input your own
password and then “Save”.
Changing the TT-WIS Internal Clock
To synchronize the internal clock of TT-WIS with PC
time, click the check box of “Synchronize Current PC
Time” and then “Save”.
Figure 10. Synchronize Current PC Time
Figure 11. Changing Password
System Setup
Figure 12. Email Setup Page
Login is required for the Email Setup page. In
the SMTP (Simple Mail Transfer Protocol)
section, users can input the SMTP server which
they want to use to send out the alert email.
The TT-WIS supports up to four Email Contacts.
Default Username: admin Default Password: TRACETEK Default Fixed IP Address: 192.168.1.254
TT-WIS Web Interface Server Installation/Operation
4
IG01V2-1303 CAS Systems Limited
[email protected]
Copyright © 2010-2017
[email protected]
Copyright © 2010-2017