Fujitsu PRIMERGY CX400 M1 User guide

PRIMERGY CX400 M1
incl. new CX25y0 M2
System configurator and order-information guide
Contents 24x 2.5" Hot-plug HDD or SSD (K1530-V100)
12x 2.5" Hot-plug HDD or SSD (K1530-V200)
Instructions
Configuration diagram
Configurator 8x 2.5" Hot-plug HDD or SSD (K1530-V300)
0 System software
I CX400 M1 Basic unit
II CX25y0 M2 Basic Unit
III Processor for CX25y0 M2
IV Memory
V Graphics/GPGPU/Grid/XeonPhi
VI Accessible drives
VII Drive Bay for 6x HDD/SSD
VIII Modular Raid 0/1, Raid5 for 4x 2.5" / 8x 2.5" SAS or SATA HD's.
On-board Controller for 4x 2.5" SATA or SAS HD`s
IX 2.5" SAS / SATA / PCIe Hard disk drives / SATADOM
X External SAS Disk Array, SAS backup drives or SCSI peripheral devices
XI Fibre-Channel controller
XII Communication/Network
XIII System Management Products (RemoteView)
XIV Miscellaneous
XV Country specific power cord
Change report
PRIMERGY Server
November 2016

System configurator and order-information guide
PRIMERGY CX400 M1 Status 2016-10-31
Instructions
This document contains basic product and configuration information that will enable you to configure your system via
PC-/SystemArchitect.
Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete
PRIMERGY Rack system.
You can configure your individual PRIMERGY server in order to adjust your specific requirements.
The System configurator is divided into several chapters that are identical to the current price list and PC-/SystemArchitect.
Please follow the lines. If there is a junction, you can choose which way or component you would like to take. Go through
the configurator by following the lines from the top to the bottom.
Section
III Memory
There are X memory slots which can be equipped with XXX MB.
It is permissible to make up to X passes through the memory upgrade options.
S26361-XXX-XXX S26361-XXX-XXX
Memory XXX MB Memory XXX MB
X times
max. X times per system max. X times per system
In one chapter you can only select as many components (here 4x) as the arrow indicates. 4x
Please note that there are information symbols which indicate necessary information.
For further information see:
http://ts.fujitsu.com/products/standard_servers/index.html (internet)
https://partners.ts.fujitsu.com/com/order-supply/configurators/primergy_config/current/Pages/default.aspx (extranet)
Prices and availability see price list and PC-/SystemArchitect.
Subject to change and errors excepted.
Fujitsu Technology Solutions x86 PRIMERGY Server 2 of 33

System configurator and order-information guide
PRIMERGY CX400 M1 Status 2016-10-31
Configuration diagram PRIMERGY CX400 M1
System unit (I)
with up to 24x 2.5" HDD/SSD for CX2550 M1 and up to 12x 2.5" HDD/SSD for CX2570 M1
Below drawing shows slot numbering. For HDD installation order, please refer operating manual.
CX400 M1 for CX2550 (S26361-K1530-V100)
rear view
CX400 M1 for CX2550 variant 8x 2,5 HDD (S26361-K1530-V300)
CX400 M1 for CX2570 (S26361-K1530-V200) Liquid Cooling is not possible
rear view
HDD cage including BP/Linking board options (can be selected under node of CX25y0 M1)
Type A: 6x 2.5" SAS Backplane (SAS / SATA only) (S26361-F5519-E10)
Type B: 6x PCIe Backplane (2x for SAS / SATA / PCIe SFF SSD + 4x for SAS / SATA only) (S26361-F5519-E20)
Dummy HDD cage: This is for customer who does not use front HDDs/SSDs (e.g. SATADOM or UFM only used)
(S26361-F5519-E50)
Type A
Type B
CX25y0 can select Type A or B or Dummy HDD cage
No loose delivery available for HDD cage options
Only special release
PSU (S26113-F617-E50/L50) In case of single PSU, throttling might be occurred.
1x 1,600W PSU (Platinum efficiency) It depends on Consumed power.
100-240V wide range 100V environment requires below HW config limitation
CPU: Only LV CPU (E5-2650L/2630L v3)
PSU (S26113-F620-E30/L30) Please see sheet of "CX400 M1 Base Unit"
1x 2,400W PSU (Platinum efficiency) Mem: Only R-DIMM, not LR-DIMM
100-240V wide range
0 1 2 3 4 5 0 1 2 3 4 5 0 1 2 3 4 5 0 1 2 3 4 5
Slot 1 HDDs Slot 2 HDDs Slot 3 HDDs Slot 4 HDDs
PSU1 Slot 3 Slot 1
PSU2 Slot 4 Slot 2
0 1
2 3
SAS / SATA / PCIe SFF SSD combi
SAS / SATA only
4 5
0 1 2 3 4 5 0 1 2 3 4 5 0 1 2 3 4 5 0 1 2 3 4 5
Slot 1 HDDs Slot 2 HDDs
PSU1
Slot 3 Slot 1
PSU2
0 1
0 1 2 3 4 5 0 1
0 1 0 1
PSU1 Slot 3 Slot 1
PSU2 Slot 4 Slot 2
Rear view
0 1 2 3 4 5
Fujitsu Technology Solutions x86 PRIMERGY Server 3 of 33

System configurator and order-information guide
PRIMERGY CX400 M1 Status 2016-10-31
Configuration diagram
CX400 M1 for PRIMERGY CX2550 M1/M2 24x 2.5" HDD (S26361-K1530-V100)
System unit (I)
board
front side
Memories CPUs
Memory CPU1 Drive Bay (VI)
(Channel A + B + C + D) Bay for 6x 2.5" (Type A)
Bank 1 (2 Modules) Xeon 4C-18C (M1) Only with SAS / SATA
Bank 2 (2 Modules) Xeon 4C-22C (M2)
Bank 3 (2 Modules) CPU incl. Heatpipe Bay for 6x 2.5" (Type B)
Bank 4 (2 Modules) Xeon 4C-18C (M1) 2x SAS / SATA / PCIe + 4x SAS / SATA
Xeon 4C-22C (M2)
Memory CPU2 CPU incl. Heatpipe
Dummy HDD cage
(Channel E + F + G + H)
Bank 1 (2 Modules)
Bank 2 (2 Modules)
Bank 3 (2 Modules)
Bank 4 (2 Modules)
Memory ( III ) Hard disk drives (VI)
HD5HD5
SATA RAID 0/1 2.5"x1" SAS 2.5"x1" SAS
support on-board or SATA or SATA
Extension slots for
HD4HD4
Modular RAID (VII) 2.5"x1" SAS 2.5"x1" SAS
Ext. SAS and SCSI Controller (IX) or SATA or SATA
Fibre Channel Controller (X)
Communication/Network (XI)
HD3HD3
2.5"x1" SAS 2.5"x1" SAS
or SATA or SATA
UFM 4GB (M1) or 8GB (M2)
HD2HD2
SATADOM 2.5"x1" SAS 2.5"x1" SAS
or SATA or SATA
HD1HD1
2.5"x1" SAS 2.5"x1" SAS or
Slot 11-14: PCIe-3 x16 (low profile, half length) or SATA SATA or PCIe
(170mm incl. bracket)
left slot from rear view HD0HD0
2.5"x1" SAS 2.5"x1" SAS or
Slot 1-4: PCIe-3 x16 (low profile, half length) or SATA SATA or PCIe
(170mm incl. bracket)
right slot from rear view
slot1-4@CPU1, slot11-14@CPU2
Key:
Included in basic unit or or =Option
2 riser cards
Fujitsu Technology Solutions x86 PRIMERGY Server 4 of 33

System configurator and order-information guide
PRIMERGY CX400 M1 Status 2016-10-31
Configuration diagram
CX400 M1 for PRIMERGY CX2550 M1/M2 8x 2.5" HDD (S26361-K1530-V300)
System unit (I)
board
front side
Memories CPUs
Memory CPU1 Bay for 2x 2.5" (Type C - virtual)
(Channel A + B + C + D) Only with 2x SATA
Bank 1 (2 Modules) Xeon 4C-18C (M1)
Bank 2 (2 Modules) Xeon 4C-22C (M2)
Bank 3 (2 Modules) CPU incl. Heatpipe
Bank 4 (2 Modules) Xeon 4C-18C (M1)
Xeon 4C-22C (M2)
Memory CPU2 CPU incl. Heatpipe
(Channel E + F + G + H)
Bank 1 (2 Modules)
Bank 2 (2 Modules)
Bank 3 (2 Modules)
Bank 4 (2 Modules)
Memory ( III )
Hard disk drives (VI)
SATA RAID 0/1
support on-board
HD1
2.5"x1" SATA
Extension slots for
Modular RAID (VII)
Ext. SAS and SCSI Controller (IX)
HD0
Fibre Channel Controller (X) 2.5"x1" SATA
Communication/Network (XI)
UFM 4GB (M1) or 8GB (M2)
SATADOM
Slot 11-14: PCIe-3 x16 (low profile, half length)
(170mm incl. bracket)
left slot from rear view
Slot 1-4: PCIe-3 x16 (low profile, half length)
(170mm incl. bracket)
right slot from rear view
slot1-4@CPU1, slot11-14@CPU2
Key:
Included in basic unit or or =Option
2 riser cards
Fujitsu Technology Solutions x86 PRIMERGY Server 5 of 33

System configurator and order-information guide
PRIMERGY CX400 M1 Status 2016-10-31
Configuration diagram
CX400 M1 for PRIMERGY CX2570 M1/M2 12x 2.5" HDD (S26361-K1530-V200)
System unit (I) Liquid Cooling is not possible
board
front side
Memories CPUs
Memory CPU1 Drive Bay (VI)
(Channel A + B + C + D) Bay for 6x 2.5" (Type A)
Bank 1 (2 Modules) Xeon 4C-18C (M1) Only with SAS / SATA
Bank 2 (2 Modules) Xeon 4C-22C (M2)
Bank 3 (2 Modules) CPU incl. Heatpipe Bay for 6x 2.5" (Type B)
Bank 4 (2 Modules) Xeon 4C-18C (M1)
2x SAS / SATA / PCIe +4x SAS / SATA
Memory CPU2 Xeon 4C-22C (M2)
(Channel E + F + G + H) CPU incl. Heatpipe
Dummy HDD cage
Bank 1 (2 Modules)
Bank 2 (2 Modules)
Bank 3 (2 Modules)
Bank 4 (2 Modules)
Memory ( III ) Hard disk drives (VI)
HD5HD5
SATA RAID 0/1 2.5"x1" SAS 2.5"x1" SAS
support on-board or SATA or SATA
Extension slots for UFM 4G/8G HD4 HD4
Modular RAID (VII) 2.5"x1" SAS 2.5"x1" SAS
Ext. SAS and SCSI Controller (IX) SATADOM or SATA or SATA
Fibre Channel Controller (X)
Communication/Network (XI)
HD3HD3
2.5"x1" SAS 2.5"x1" SAS
Slot 15-18: For only GPGPU/Grid/XeonPhi or SATA or SATA
PCIe-3 x16
HD2HD2
2.5"x1" SAS 2.5"x1" SAS
Slot 5-8: For only GPGPU/Grid/XeonPhi or SATA or SATA
PCIe-3 x16
HD1HD1
2.5"x1" SAS 2.5"x1" SAS
Slot 11-14: PCIe-3 x16 (low profile, half length) or SATA or SATA or PCIe
(170mm incl. bracket)
left slot from rear view HD0HD0
2.5"x1" SAS 2.5"x1" SAS
Slot 1-4: PCIe-3 x16 (low profile, half length) or SATA or SATA or PCIe
(170mm incl. bracket)
right slot from rear view
slot1-4/5-8@CPU1, slot11-14/15-18@CPU2
Key:
Included in basic unit or or =Option
4 riser cards
Fujitsu Technology Solutions x86 PRIMERGY Server 6 of 33

System configurator and order-information guide
PRIMERGY CX400 M1 Status 2016-10-31
Start PRIMERGY CX400 M1
Section
ICX400 M1 Basic unit
System unit consisting of:
* 2U Housing without power supply modules/HDD cage/HDD BP/Linking board
(PSU has to be configured min 2x for 1,600W PSU, min 1x for 2,400W PSU)
* Fans
- Redundant and non hot plug system 4x double-fans (n+1 redundancy)
* RMK
- Sliding rail
* Drives / Bays (option for node)
- 6x 2.5" HDD cage per node or 6x 2.5" HDD/PCIe SSD cage per node option or dummy HDD cage per node option
*HDD cage option includes HDD BP and Linking board
- 2x 2.5" SATA HDD/SSD cage per node
- 2x dummy cage for CX2570 M1/M2 variant base unit only
- 4x dummy cage for CX25y0 M1/M2
* Nodes (option)
- up to 4x CX2550 M1 or M2
- up to 2x CX2570 M1 or M2
B
Fujitsu Technology Solutions x86 PRIMERGY Server 7 of 33

System configurator and order-information guide
PRIMERGY CX400 M1 Status 2016-10-31
B
For AC 100V environment using CX2550M1/M2, restrictions
based on the quantity of memory and HDD applied as follow :
Memory (RDIMM) / Internal HDD quantity
CPU (TDP) Memory quantity 8 8 16 16
HDD quantity
2 6 2 6
Rack version for 19'' racks with >= 135 W - NA -NA
No PSU included in Base Unit 120 W X- - -
Basic unit CX400 M1 for
105 W, 90 W, 85 W
X X X -
CX2550 M2 variant 24x 2,5 HDD S26361-K1530-V100
65 W, 55 W
X X X X
Basic unit CX400 M1 for Remark : LRDIMM is not supported under AC 100V environment
CX2570 M1 variant S26361-K1530-V200 Liquid cooling is not possible
Basic unit CX400 M1 for
CX2550 M2 variant 8x 2,5 HDD S26361-K1530-V300
S26113-F617-E50 S26113-F620-E30 In case of 1x 2,400W Config
1,600W PSU module platinum 2,400W PSU module platinum
2x below accelerator card
redundancy redundancy can't be possible on CX2570
94% efficiency (platinum)
94% efficiency (platinum)
M1/M2
uses hot plug PSU slot uses hot plug PSU slot Tesla K80
min. 2 / max. 2x per system min. 1 / max. 2x per system XeonPhi 3120P / 7120P
Full redundancy cannot be guaranteed for high duty.
config.
You must purchase "Dummy PSU",
In this case SysArch will generate a warning and if you purchased only one PSU.
PowerSafeguard will throttle CPUs and memory
in case of a PSU failure. S26361-F5564-E10
So, power consumption will be limited to 1,600W. Dummy PSU
min 1x / max 1x
2.400W (S26113-F620-E30) must use Power Cord 16A (S26361-F3151-E301)
for CX400 M1 within rack
please choose only 1 of this 2 cables
S26361-F3151-E351 S26361-F3151-E301 S26361-F3151-E500 T26139-Y3850-E10
Power Cord 10A Power Cord 16A Power Cord No Power Cord
max. IEC 320 C19 -> C14 IEC 320 C19 -> C20 IEC320 C19 ->
2 x US NEMA L6-20p
default within rack for 100V-115V only*) without rack only without rack only *) in System architect please
1x per PSU 1x per PSU 1x per PSU 1x per PSU change the default 16A connection
to a 10A connection for all PSU
Please order appropriate power cord additionally:
Power code IEC320 C19 -> C14 (200-240V only) S26361-F3151-L350
Power code IEC320 C19 -> C20 S26361-F3151-L300
Power code IEC320 C19 -> US NEMA L6-20p S26361-F3151-L500
S26361-F5558-E50
Liquid cooling
tube set
for Liquid cooling
1x per CX400
C
S26361-F3151-E301
100-120V /
200-240V
100-120V /
200-240V
1600W PSU
2400W PSU
S26361-F3151-E351
200-240V only
Not supported
Fujitsu Technology Solutions x86 PRIMERGY Server 8 of 33

System configurator and order-information guide
PRIMERGY CX400 M1 Status 2016-10-31
C
PRIMECENTER Rack
Sliding rail
1-hand-mounting
RMK - 1 pair consisting of
-
carrier length variable
toolless mounting possible
included in base unit
S26361-F4530-E12 S26361-F4530-E10 S26361-F2735-L10
Mounting 2U server in Mounting in Adapter angle PC/DC-Rack, till 50Kg
asymmetrical racks symmetrical & 3rd party racks necessary for mounting RMKs in
with 2U support bracket (no support bracket needed) asymmetrical racks
SNP:SY-F1647E301-P
Installation ex works for one
server or subsystem.
Hereby the rack will be delivered "Rack-mounting ex factory"
completely pre-mounted and
This service is to be ordered once
all wired connections are tested.
per installable server/storage
With PCR M1 16U, 24U, 42U: subsystem, in order to get the
Systems and components server/storage subsystem
will be delivered installed in the rack mounted into the racks. In case of
not-installed server and subsystems
this service has to be ordered,
to get the mounting kits and the
To be ordered only together with cables installed.
a PRIMECENTER rack
refer PCR S2 or M1 rack configurator
for air cooling
refer to M2 rack configurator
for liquid cooling
max. 1x per System
S26361-F1452-E100 S26361-F1452-E110 S26361-F1452-E130
REGION KIT APAC/EMEA/India REGION KIT JP
REGION KIT America
For Shipments to EMEA / Asia and For Shipments to Japan regions For Shipments to America region
Pacific regions
1x per system 1x per system 1x per system
D
Fujitsu Technology Solutions x86 PRIMERGY Server 9 of 33

System configurator and order-information guide
PRIMERGY CX400 M1 Status 2016-10-31
Start PRIMERGY CX25y0 M2
Section
II
CX25y0 M2 Basic unit
CX2550 M2 System unit consisting of:
* 1U Half wide server node
- 1U Half wide tray
- Motherboard
- 2x PCIe Gen3 x16 riser card for low profile slot
(Liquid Cooling can only support 1x PCIe Gen3)
- 1x UFM 8GB placement possible
- 1x SATADOM possible
- 1x correspoding cooling part (Air Cooling = Heatsinks / Liqiud Cooling = LC Kit) already included
CX2570 M2 System unit consisting of:
* 2U Half wide server node
- 2U Half wide tray
- Motherboard
- 2x PCIe Gen3 x16 riser card for lowprofile slot
- 2x PCIe Gen3 x16 riser card for GPGPU/Grid/XeonPhi
- 1x UFM 8GB placement possible
- 1x SATADOM possible
Systemboard D3343-B (same for CX2550 M2 and CX2570 M2) with:
* Two Xeon E5-2600 v4 4C, 6C, 8C, 10C, 12C, 14C, 16C, 18C, 20C & 22C CPU`s (Socket-R3)
with 2 serial QPI links ( Quick Path Interconnect ) and four memory channels per CPU
Two CPU has to be selected for an orderable basic unit,
* Chipset Intel® C610 (codenamed Wellsburg)
* 4 PCIe slots
-2x PCIe-3 x16 (Low Profile cards)
-2x PCIe-3 x16 (GPGPU/Grid/XeonPhi)
* 16 memory slots for max. 2,048GB RAM DDR4 available
- Memory is divided into 8 DIMMs per CPU ( 4 channels with 2 slots per channel )
Possible max. configurations are:
16x 128GB LRDIMM (8 rank modules) = 2,048GB
16x 32GB RDIMM (dual rank modules) = 512GB
First Memory ( one module ) has to be selected for an orderable basic unit per CPU
- Memory upgrade is possible module wise
- SDDC (Chipkill) is supported for memory modules,
* Dual Port 10/100/1000 x4 PCI Express* Gigabit Ethernet Intel LAN controller Powerville on-board
* iRMC S4 (integrated Remote Management Controller) on-board server management controller with
dedicated 10/100/1000 Service LAN-port and integrated graphics controller.
The Service LAN-port can be switched alternatively on standard Gbit LAN port 1
* Graphics Controller integrated in iRMC S4 (integrated Remote Management Controller):
1600x1200x16bpp 60Hz, 1280x1024x16bpp 60Hz, 1024x768x32bpp 75Hz, 800x600x32bpp 85Hz,
640x480x32bpp 85Hz
(1280x1024x24bpp 60Hz only possible if local monitor or remote video redirection is off)
A
Fujitsu Technology Solutions x86 PRIMERGY Server 10 of 33

System configurator and order-information guide
PRIMERGY CX400 M1 Status 2016-10-31
A
Interfaces at the rear:
* 1x VGA (15 pins)
* 2x USB 3.0 (UHCI), no USB wakeup
* 2x LAN RJ45, 1x Service-LAN RJ45
Interfaces internal:
* MiniSAS HD connector for 6 HDD & SSD
* 2x USB ports for internal USB redirection connected to BMC
* 1 port of USB 2.0 internally used for UFM
Software:
- ServerView Suite Software package incl. ServerStart, ServerBooks, Management Software and Updates
- Documentation engl. (multilingual on CD)
Note: Power Cord is not included in the basic unit and
has to be configured separately
B
Fujitsu Technology Solutions x86 PRIMERGY Server 11 of 33

System configurator and order-information guide
PRIMERGY CX400 M1 Status 2016-10-31
B
Mixed node configuration of CX2550 & CX2570
Server node for CX400 M1 2U Chassis
is NOT allowed
PSU is not part of CX400 M1 Base unit
Basic unit is without CPU and Memory
Different HW configuration for each node
For an orderable basic unit two CPU and
in chassis can be possible.
eight memory = 1 per channel has to be selected
But ≥135W and ≤120W CPU can't be mixed *)
CX2550 M2 Basic unit
*) Note: cannot be checked by system architect !
PRIMERGY CX2550 M2 Air Cooling S26361-K1568-V200 Mix of Air Cooling & Liquid Cooling SKUs is NOT possible
CX2570 M2 Basic unit
PRIMERGY CX2570 M2 Air Cooling S26361-K1569-V200
CX2550 M2 Basic unit CX2550 M2 liquid cooling / CX2570 M2 requires two CPU
PRIMERGY CX2550 M2 Liquid Cooling
S26361-K1568-V210
support only one PCIe Gen3 slot
S26361-K1568-V200
S26361-K1569-V200
S26361-K1568-V210
Liquid cooling based Node
PRIMERGYCX2550 M2 Air Cooling PRIMERGYCX2570 M2 Air Cooling PRIMERGY CX2550 M2 Liquid Co.
1U half wide w/o GPGPU support 2U half wide w/ GPGPU support
1U half wide w/o GPGPU support
INTEL Processor INTEL Processor INTEL Processor
based dual socket Server Blade. based dual socket Server Blade. based dual socket Server Blade.
CPU Heatsinks already included
CPU Heatsinks already included Liquid Cooling set already included
max. 4x per system unit
max. 2x per system unit
max. 4x per system unit
S26361-F5518-E100
mandatory if chassis is not full equipped by nodes (only within special release)
Dummy nodes
1U half wide dummy
needed to be ordered 1x
for each left open server slot
max. 3x per system unit
S26361-F4575-E11 S26361-F4575-E21
S26361-F4575-E31
S26361-F4575-E41
Service for CX-Server nodes CX-Server nodes individually
Service for CX-Server nodes
CX-Server nodes individually
installation in the CX400 24x 2.5" packed/deliverd for CX400 24x 2.5" installation in the CX400 8x 2.5" packed/deliverd for CX400 8x 2.5"
HDD cage standard HDD cage standard
HDD cage standard
HDD cage standard
max. 4x per system unit max. 1x per CX-Server node max. 4x per system unit max. 1x per CX-Server node
C
Fujitsu Technology Solutions x86 PRIMERGY Server 12 of 33

System configurator and order-information guide
PRIMERGY CX400 M1 Status 2016-10-31
C
Section
II Processor
There are 2 processor sockets available.
The first socket must always be equipped with the first CPU which can be selected via configurator
Two processors with different clock frequencies are not possible
Liquid Cooling variant (S26361-K1568-V210) must select 2 processors. Single processor is not possible.
CX2570 M2 air cooling variant (S26361-K1569-V200) must select 2 processors.Single processor is not possible
Single CPU configuration is supported
Max. two CPU`s can be selected per basic unit
One of following CPU´s can be selected once (only as first CPU)
for an orderable basic unit Max. DDR4 Bus Speed depends on:
Optional second CPU has to be the same type like the first CPU - max. DDR4 Bus Speed from the CPU and
Xeon E5-2600v4 (R) Basic - max. DDR4 Memory Speed and
- 1x 64-bit Intel Xeon (15MB Smart Cache)
- max. memory modules on one memory channel
1866 MHz DDR4 Bus; 6.4 GT/s QPI Bus
occupies socket for one CPU
Xeon E5-2603v4 6C/6T 1.70GHz 15MB 6.4GT/s 1866MHz 85W S26361-F3933-E103
Xeon E5-2609v4 8C/8T 1.70GHz 20MB 6.4GT/s 1866MHz 85W S26361-F3933-E109 Advanced Thermal Design
Xeon E5-2600v4 (R) Standard refer to ATD with S26361-F3776-E240
- 1x 64-bit Intel Xeon (15/20MB Smart Cache); Hyper-Threading (HT);
2133 MHz DDR4 Bus; 8.0 GT/s QPI Bus
occupies socket for one CPU w/o ATD option
Xeon E5-2620v4 8C/16T 2.10GHz 20MB 8.0GT/s 2133MHz 85W S26361-F3933-E120 <= 145W
35℃6 2 1
Xeon E5-2630v4 10C/20T 2.20GHz 25MB 8.0GT/s 2133MHz 85W S26361-F3933-E130 160W
30℃0 2 1
Xeon E5-2640v4 10C/20T 2.40GHz 25MB 8.0GT/s 2133MHz 90W S26361-F3933-E140 w/ ATD option
Xeon E5-2600v4 (R) Advanced
135/145/160W
40℃6 - 1
- 1x 64-bit Intel Xeon (25/30MB Smart Cache); Hyper-Threading (HT); (Liquid cooling only)
2400 MHz DDR4 Bus; 9.6 GT/s QPI Bus
occupies socket for one CPU <=120W 40℃6 2 1
Xeon E5-2650v4 12C/24T 2.20GHz 30MB 9.6GT/s 2400MHz 105W S26361-F3933-E150
Xeon E5-2660v4 14C/28T 2.00GHz 35MB 9.6GT/s 2400MHz 105W S26361-F3933-E160
Xeon E5-2680v4 14C/28T 2.40GHz 35MB 9.6GT/s 2400MHz 120W S26361-F3933-E180
Xeon E5-2690v4 14C/28T 2.60GHz 35MB 9.6GT/s 2400MHz 135W S26361-F3933-E190
Xeon E5-2600v4 (R) Frequency Optimized
- 1x 64-bit Intel Xeon (10-30MB Smart Cache); Hyper-Threading (HT);
2400 MHz DDR4 Bus; 8.0 & 9.6 GT/s QPI Bus
occupies socket for one CPU
Xeon E5-2623v4 4C/8T 2.60GHz 10MB 8.0GT/s 2133MHz 85W S26361-F3933-E123
Xeon E5-2637v4 4C/8T 3.50GHz 15MB 9.6GT/s 2400MHz 135W S26361-F3933-E137
Xeon E5-2643v4 6C/12T 3.40GHz 20MB 9.6GT/s 2400MHz 135W S26361-F3933-E143
Xeon E5-2667v4 8C/16T 3.20GHz 25MB 9.6GT/s 2400MHz 135W S26361-F3933-E167
Xeon E5-2687Wv4 12C/24T 3.00GHz 30MB 9.6GT/s 2400MHz 160W S26361-F3933-E187
For air cooled solution on Special Release only
Xeon E5-2687Wv4 12C/24T 3.00GHz 30MB 9.6GT/s 2400MHz 160W S26361-F3933-E188
For liquid cooled solution only
Xeon E5-2689v4 10C/20T 3.10GHz 25MB 9.6GT/s 2400MHz 165W S26361-F3933-E189 For liquid cooled solution on Special Release only
Xeon E5-2600v4 (R) High Core Count
- 1x 64-bit Intel Xeon (35-40MB Smart Cache); Hyper-Threading (HT); Restrictions if special release request is required:
2400 MHz DDR4 Bus; 9.6 GT/s QPI Bus - Up to 30 deg-C ambient temperature is allowed
occupies socket for one CPU - Integration of HDD/SSD is not possible (only SATADOM)
Xeon E5-2683v4 16C/32T 2.10GHz 40MB 9.6GT/s 2400MHz 120W S26361-F3933-E183
Xeon E5-2695v4 18C/36T 2.10GHz 45MB 9.6GT/s 2400MHz 120W S26361-F3933-E195
Xeon E5-2697v4 18C/36T 2.30GHz 45MB 9.6GT/s 2400MHz 145W S26361-F3933-E197
Xeon E5-2697Av4 16C/32T 2.60GHz 40MB 9.6GT/s 2400MHz 145W S26361-F3933-E191
Xeon E5-2698v4 20C/40T 2.20GHz 50MB 9.6GT/s 2400MHz 135W S26361-F3933-E198
Xeon E5-2699v4 22C/44T 2.20GHz 55MB 9.6GT/s 2400MHz 145W S26361-F3933-E199
Xeon E5-2699Av4 22C/44T 2.40GHz 55MB 9.6GT/s 2400MHz 145W S26361-F3933-E192 planned to release on Nov, 2016
Xeon E5-2600v4 (R) Low Power
- 1x 64-bit Intel Xeon (20/30MB Smart Cache); Hyper-Threading (HT);
2133/2400 MHz DDR4 Bus; 8.0/9.6 GT/s QPIBus
occupies socket for one CPU
Xeon E5-2630Lv4 10C/20T 1.80GHz 25MB 8.0GT/s 2133MHz 55W S26361-F3933-E131
Xeon E5-2650Lv4 14C/28T 1.70GHz 35MB 9.6GT/s 2400MHz 65W S26361-F3933-E151
For Air cooling
S26361-F3849-E100
Cooling Kit 2nd CPU
For Liquid cooling
D1 D2
CPU type
PCIe slots
Air cooled
Liquid cooled
front
HDD
Ambient
temp
Fujitsu Technology Solutions x86 PRIMERGY Server 13 of 33

System configurator and order-information guide
D1 D2
PRIMERGY CX400 M1 Status 2016-10-31
One of following CPU´s has to be selected as second CPU
Optional second CPU has to be the same type like the first CPU
Xeon E5-2600v4 (R) Basic
- 1x 64-bit Intel Xeon (15MB Smart Cache)
1866 MHz DDR4 Bus; 6.4 GT/s QPI Bus
occupies socket for one CPU
Xeon E5-2603v4 6C/6T 1.70GHz 15MB 6.4GT/s 1866MHz 85W
S26361-F3933-E103
Xeon E5-2609v4 8C/8T 1.70GHz 20MB 6.4GT/s 1866MHz 85W
S26361-F3933-E109
Xeon E5-2600v4 (R) Standard
- 1x 64-bit Intel Xeon (15/20MB Smart Cache); Hyper-Threading (HT);
2133 MHz DDR4 Bus; 8.0 GT/s QPI Bus
occupies socket for one CPU
Xeon E5-2620v4 8C/16T 2.10GHz 20MB 8.0GT/s 2133MHz 85W S26361-F3933-E120
Xeon E5-2630v4 10C/20T 2.20GHz 25MB 8.0GT/s 2133MHz 85W S26361-F3933-E130
Xeon E5-2640v4 10C/20T 2.40GHz 25MB 8.0GT/s 2133MHz 90W S26361-F3933-E140
Xeon E5-2600v4 (R) Advanced
- 1x 64-bit Intel Xeon (25/30MB Smart Cache); Hyper-Threading (HT);
2400 MHz DDR4 Bus; 9.6 GT/s QPI Bus
occupies socket for one CPU
Xeon E5-2650v4 12C/24T 2.20GHz 30MB 9.6GT/s 2400MHz 105W S26361-F3933-E150
Xeon E5-2660v4 14C/28T 2.00GHz 35MB 9.6GT/s 2400MHz 105W S26361-F3933-E160
Xeon E5-2680v4 14C/28T 2.40GHz 35MB 9.6GT/s 2400MHz 120W S26361-F3933-E180
Xeon E5-2690v4 14C/28T 2.60GHz 35MB 9.6GT/s 2400MHz 135W S26361-F3933-E190
Xeon E5-2600v4 (R) Frequency Optimized
- 1x 64-bit Intel Xeon (10-30MB Smart Cache); Hyper-Threading (HT);
2400 MHz DDR4 Bus; 8.0 & 9.6 GT/s QPI Bus
occupies socket for one CPU
Xeon E5-2623v4 4C/8T 2.60GHz 10MB 8.0GT/s 2133MHz 85W
S26361-F3933-E123
Xeon E5-2637v4 4C/8T 3.50GHz 15MB 9.6GT/s 2400MHz 135W S26361-F3933-E137
Xeon E5-2643v4 6C/12T 3.40GHz 20MB 9.6GT/s 2400MHz 135W S26361-F3933-E143
Xeon E5-2667v4 8C/16T 3.20GHz 25MB 9.6GT/s 2400MHz 135W S26361-F3933-E167
Xeon E5-2687Wv4 12C/24T 3.00GHz 30MB 9.6GT/s 2400MHz 160W S26361-F3933-E187
Xeon E5-2689v4 10C/20T 3.10GHz 25MB 9.6GT/s 2400MHz 165W S26361-F3933-E189
Xeon E5-2600v4 (R) High Core Count
- 1x 64-bit Intel Xeon (35-40MB Smart Cache); Hyper-Threading (HT);
2400 MHz DDR4 Bus; 9.6 GT/s QPI Bus
occupies socket for one CPU
Xeon E5-2683v4 16C/32T 2.10GHz 40MB 9.6GT/s 2400MHz 120W S26361-F3933-E183
Xeon E5-2695v4 18C/36T 2.10GHz 45MB 9.6GT/s 2400MHz 120W S26361-F3933-E195
Xeon E5-2697v4 18C/36T 2.30GHz 45MB 9.6GT/s 2400MHz 145W S26361-F3933-E197
Xeon E5-2697Av4 16C/32T 2.60GHz 40MB 9.6GT/s 2400MHz 145W S26361-F3933-E191
Xeon E5-2698v4 20C/40T 2.20GHz 50MB 9.6GT/s 2400MHz 135W S26361-F3933-E198
Xeon E5-2699v4 22C/44T 2.20GHz 55MB 9.6GT/s 2400MHz 145W S26361-F3933-E199
Xeon E5-2699Av4 22C/44T 2.40GHz 55MB 9.6GT/s 2400MHz 145W S26361-F3933-E192
Xeon E5-2600v4 (R) Low Power
- 1x 64-bit Intel Xeon (20/30MB Smart Cache); Hyper-Threading (HT);
2133/2400 MHz DDR4 Bus; 8.0/9.6 GT/s QPIBus
occupies socket for one CPU
Xeon E5-2630Lv4 10C/20T 1.80GHz 25MB 8.0GT/s 2133MHz 55W S26361-F3933-E131
Xeon E5-2650Lv4 14C/28T 1.70GHz 35MB 9.6GT/s 2400MHz 65W S26361-F3933-E151
Separate orderable CPU upgrade kits
S26361-F3933-L703 Xeon E5-2603v4 6C/6T 1.70GHz 15MB 6.4GT/s 1866MHz 85W
S26361-F3933-L709 Xeon E5-2609v4 8C/8T 1.70GHz 20MB 6.4GT/s 1866MHz 85W
S26361-F3933-L720 Xeon E5-2620v4 8C/16T 2.10GHz 20MB 8.0GT/s 2133MHz 85W
S26361-F3933-L730 Xeon E5-2630v4 10C/20T 2.20GHz 25MB 8.0GT/s 2133MHz 85W
S26361-F3933-L740 Xeon E5-2640v4 10C/20T 2.40GHz 25MB 8.0GT/s 2133MHz 90W
S26361-F3933-L750 Xeon E5-2650v4 12C/24T 2.20GHz 30MB 9.6GT/s 2400MHz 105W
S26361-F3933-L723 Xeon E5-2623v4 4C/8T 2.60GHz 10MB 8.0GT/s 2133MHz 105W
E
Fujitsu Technology Solutions x86 PRIMERGY Server 14 of 33

System configurator and order-information guide
E
PRIMERGY CX400 M1 Status 2016-10-31
Section
IV Memory
- There are 8 memory slots per CPU for max.
512GB LRDIMM (8x 64GB 4R)
256GB RDIMM (8x 32GB 2R) for CX25y0 M1 and 512GB RDIMM (8x 64GB 3DS) for CX25y0 M2
CX25y0 M1: => max. 1.024GB for two CPU`s ( 512GB per CPU ), using LRDIMM
CX25y0 M2: => max. 1.024GB for two CPU`s ( 512GB per CPU ), using RDIMM or LRDIMM
- The memory area is divided into 4 channels per CPU with 2 slots per channel
- Slot 1 of each channel belongs to memory bank 1, the slot 2 belongs to memory bank 2,
Registered and Load Reduced DIMMs can be selected
No mix of registered and load reduced modules is allowed.
Memory can be operated at 1.2V.
Depending on the CPU following memory speeds will be reached:
- 1DPC - 2133MHz max within CX25y0 M1
- 2DPC - 1866MHz on RDIMM and 2133MHz on LR-DIMM within CX25y0 M1
- 1DPC & 2DPC - 2400MHz max within CX25y0 M2
SDDC (Chipkill) is supported for registered / load redueced x4 organized memory modules only
1.) In the "Independent Channel Mode" is following configuration possible
Channels can be populated in any order in Independent Channel Mode. All four
channels may be populated in any order and have no matching requirements. All
channels must run at the same interface frequency but individual channels may run at
different DIMM timings (RAS latency, CAS latency, and so forth)
No mix of registered, load reduced and unbuffered modules allowed.
No mix of registered and load reduced modules is allowed.
2.) "Performance Mode" configuration
- In this configuration, the memory module population ex factory is spread across all channels.
The BIOS is set to the max. performance for memory.
Minimum configuration is four identical modules per CPU
Liquid Cooling supports Performance mode only
S26361-F3694-E10
Independent Mode
Independent Channel Mode allows all channels to be populated in any order. No specific Memory RAS features are defined
Requires min 1 memory Module per CPU
1x per CPU S26361-F3694-E2 Performance Mode Installation
BIOS Setup factory preinstalled for max. Performance, Four identical memory modules
will be equipped in one memory bank to achieve highest memory performance. All four modules are active and full capacity can be used.
Multiple of 4 identical modules to be configured per CPU
E1 E2
Fujitsu Technology Solutions x86 PRIMERGY Server 15 of 33

System configurator and order-information guide
PRIMERGY CX400 M1 Status 2016-10-31
E1
CX25y0 M1
Minimum one memory module or order code per CPU = first memory
Registered Memory (RDIMM) with SDDC (chipkill) support Note 1)
- one DDR4 registered ECC memory Module, 1.2V Max. DDR4 memory speed depends on the memory configuration
Choose up to 8 order codes per CPU (No of mem modules per channel) as well as on the CPU type.
8GB (1x8GB) 1Rx4 DDR4-2133 R ECC S26361-F3843-E614 The memory channel with the lowest speed defines the speed
16GB (1x16GB) 2Rx4 DDR4-2133 R ECC
S26361-F3843-E616 of all CPU channels in the system
8GB (1x8GB) 1Rx4 DDR4-2133 R ECC *S26361-F3843-E604
16GB (1x16GB) 2Rx4 DDR4-2133 R ECC
*S26361-F3843-E606 For real memory speed (depending on memory type / population),
32GB (1x32GB) 2Rx4 DDR4-2133 R ECC
S26361-F3843-E617
please check the spreadsheet "Memory speed" below
up to 8x
Registered Memory (RDIMM) no SDDC (chipkill) support
per CPU - one DDR4 registered ECC memory Module, 1.2V
Choose up to 8 order codes per CPU
8GB (1x8GB) 2Rx8 DDR4-2133 R ECC S26361-F3843-E615
8GB (1x8GB) 2Rx8 DDR4-2133 R ECC *S26361-F3843-E605 Note 2)
Load Reduced Memory (LRDIMM) with SDDC (chipkill) support Mix of memory modules is only possible within the same group
- one DDR4 load reduced ECC memory Module, 1.2V
Choose up to 8 order codes per CPU Loose delivery available for Air Cooling,
32GB (1x32GB) 4Rx4 DDR4-2133 LR ECC S26361-F3844-E617
NOT available for Liquid Cooling
64GB (1x64GB) 4Rx4 DDR4-2133 LR ECC S26361-F3844-E618 For Liquid Cooling, S26361-F3844-E618 *
must be handle as Special Release.
F
Fujitsu Technology Solutions x86 PRIMERGY Server 16 of 33

System configurator and order-information guide
PRIMERGY CX400 M1 Status 2016-10-31
E2
CX25y0 M2
Minimum one memory module or order code per CPU = first memory
Note 1)
Max. DDR4 memory speed depends on the memory configuration
(No of mem modules per channel) as well as on the CPU type.
The memory channel with the lowest speed defines the speed
of all CPU channels in the system
For real memory speed (depending on memory type / population),
please check the table "Memory speed" below
Note 2)
Mix of memory modules is only possible within the same group
Registered Memory (RDIMM) with SDDC (chipkill) support
- one DDR4 registered ECC memory Module, 1.2V
Choose up to 8 order codes per CPU
8GB (1x8GB) 1Rx4 DDR4-2400 R ECC S26361-F3934-E611
16GB (1x16GB) 2Rx4 DDR4-2400 R ECC
S26361-F3934-E612
32GB (1x32GB) 2Rx4 DDR4-2400 R ECC
S26361-F3934-E615
Registered Memory (RDIMM 3DS) with SDDC (chipkill) support
- one DDR4 registered 3DS ECC memory Module, 1.2V
Choose up to 8 order codes per CPU
up to 8x 64GB (1x64GB) 4Rx4 DDR4-2400 3DS ECC S26361-F3934-E617
per CPU
Registered Memory (RDIMM) no SDDC (chipkill) support
- one DDR4 registered ECC memory Module, 1.2V
Choose up to 8 order codes per CPU
8GB (1x8GB) 2Rx8 DDR4-2400 R ECC S26361-F3934-E614 On Special Release Request only
16GB (1x16GB) 2Rx8 DDR4-2400 R ECC
S26361-F3934-E613
Load Reduced Memory (LRDIMM) with SDDC (chipkill) support Loose delivery available for Air Cooling,
- one DDR4 load reduced ECC memory Module, 1.2V
NOT available for Liquid Cooling
Choose up to 8 order codes per CPU
64GB (1x64GB) 4Rx4 DDR4-2400 LR ECC S26361-F3935-E616
For Liquid Cooling, S26361-F3935-E616 *
must be handled as Special Release.
F
Fujitsu Technology Solutions x86 PRIMERGY Server 17 of 33

System configurator and order-information guide
PRIMERGY CX400 M1 Status 2016-10-31
Memory Configuration PRIMERGY CX25y0 M1/M2
Each CPU offers 8 Slots for DDR4 Memory Modules organised in 2 Banks and 4 Channels.
Depending on the amount of memory configured you can decide between 2 basic modes of operation (see explanation below).
There are 2 different kinds of DDR4 Memory Modules available: RDIMM and LRDIMM
RDIMM / LRDIMM offer different functionality. Mix of RDIMM / LRDIMM is not alloved.
Mode Configuration RDIMM Application
LRDIMM
SDDC (chipkill) support any no yes detect multi-bit errors
Independant Channel Mode 1, 2 or 3 Modules per Bank yes yes offers max. flexibility, upgradeability, capacity
Performance Mode 4 identical Modules / Bank yes yes offers maximum performance and capacity
*) For the delivery ex works the system will be prepared with dedicated BIOS setting.
Capacity Configuration Notes
Min. Memory per CPU
1 Module / CPU
with one CPU
Max. Memory per CPU 8 Modules / CPU with one CPU
Max. Memory per System 16 Modules / System with two CPU
*planned
Memory-Speed:
Max. DDR4 memory speed depends on the memory configuration on one memory channel and the speed of the CPU
The memory channel with the lowest speed defines the speed of all CPU channels in the system
Real maximum memory-bus speed depending on CPU type, memory configuration (DPC) and voltage setting (BIOS)
Voltage setting (BIOS)
CPU with 1866MHz DDR4 Bus
CPU with 1600MHz DDR4 Bus
1R - Single Rank
2R - Dual Rank
4R - Quad Rank
8R - Octal Rank
1DPC = 1 DIMM per Channel
2DPC = 2 DIMM per Channel
3DPC = 3 DIMM per Channel
Configuration hints:
- The memory sockets on the systemboard offer a color coding:
Bank I black sockets
Bank II blue sockets
Bank III
green sockets
- A so called Bank consits of 1 memory module on every Channel available on one CPU (examples see below)
Bank I on CPU 1/2 up to 4 memory modules connected to Channel A - H on the 1st/2nd CPU
Bank II on CPU 1/2 up to 4 memory modules connected to Channel A - E on the 1st/2nd CPU
Bank III on CPU 1/2
up to 4 memory modules connected to Channel A - E on the 1st/2nd CPU
(can not be populated by UDIMM or 4R RDIMM memory modules)
- See below and next page for a detailed descriptions of the memory configuration supported.
RDIMM
x8
x4
CPU with 2400MHz DDR4 Bus
-
-
-
-
-
-
-
-
-
-
-
1866
1866
-
DPC
DPC
DPC
DPC
DPC
DPC
1866
1866
-
1866
1866
-
2133
2400
2400
1600
1600
-
1600
1600
-
-
2133
RDIMM
2400MHz
LRDIMM
2400MHz
-
2400
2400
-
2
3
1
2
3
1866
1866
-
DPC
3
-
CPU with 2133MHz DDR4 Bus
2133
2133
-
2133
2133
-
1
2
2133
-
2133
DPC
DPC
DPC
DPC
DPC
1
Mem. Speed provided by CPU
2
3
RDIMM
2133MHz
LRDIMM
2133MHz
1.2V
1.2V
1.2V
1.2V
1
CX25y0 M1
CX25y0 M2
RDIMM
LRDIMM
1x8GB
1x64GB
8x64GB*
8x64GB
1024GB*
1024GB
CX25y0 M1
CX25y0 M2
RDIMM
1x8GB
8x32GB
512GB
LRDIMM
1x 32GB
8x 64GB
1024GB
Fujitsu Technology Solutions x86 PRIMERGY Server 18 of 33

System configurator and order-information guide
PRIMERGY CX400 M1 Status 2016-10-31
1. Independent Channel Mode
required
required if 2nd CPU is configured
Bank I Data Data Data Data Data Data Data Data optional, same type in Bank per CPU
(black sockets)
Bank II Data Data Data Data Data Data Data Data optional, any type
(blue sockets)
Independent Channel Mode allows all channels to be populated in any order
Can run with differently rated DIMMs and use the settings of the slowest DIMM installed in the system
3. Performance Channel Mode
required
required if 2nd CPU is configured
Bank I Data Data Data Data Data Data Data Data optional, same type in Bank per CPU
(black sockets)
Bank II Data Data Data Data Data Data Data Data optional, any type
(blue sockets)
Performance Channel Mode requires identical modules on all channels of each Bank per CPU.
If this mode is used, a multiple of 4 identical modules has to be ordered.
Channel D
Channel E
Channel F
Channel G
Channel A
Channel B
Channel C
1st XEON CPU
2nd XEON CPU
Channel H
Channel A
Channel B
Channel C
Channel D
Channel E
Channel F
1st XEON CPU
2nd XEON CPU
Channel G
Channel H
Fujitsu Technology Solutions x86 PRIMERGY Server 19 of 33

System configurator and order-information guide
F
PRIMERGY CX400 M1 Status 2016-10-31
Section
VGraphics/GPGPU/Grid/XeonPhi
Graphics Controller integrated in iRMCS4 (integrated RemoteManagement Controller):
1600x1200x16bpp 60Hz, 1280x1024x16bpp 60Hz, 1024x768x32bpp 75Hz, 800x600x32bpp 85Hz,640x480x32bpp 85Hz
(1280x1024x24bpp 60Hz only possible if local monitor or remote video redirection is off)
No mixed configuration
Two GPGPU (General Purpose Graphical Processor Unit) can be ordered as option.
A mounting kit has to beordered seperatly and will be installed if ordered ex factorytogether
with the GPGPU card. New cards requires the suitable Air Duct and bracket kit!
The Riser card, power cables and Airtunnel are part of System delivery
ATD option are not supported for Intel XeonPhi, NVIDIA K80 and M60
Liquid Cooling is not possible
S26361-F3736-E500 S26361-F3736-E510
Mounting Kit for CX2570
Mounting Kit for K80
S26361-F3736-L510 S26361-F3736-L500 1x mounting kit for 1x GPGPU
consists of 1xpwr cable consists of 1xpwr cable Mounting Kit for K80
Mounting kit for CX2570
2x mounting kit for 2x GPGPU
2x
1x bracket and 2x fixation material
1x bracket and 2x fixation material for loose delivery for loose delivery
max. 2x per system max. 2x per system
S26361-F2222-E40
PY NVIDIA Tesla K40 Computing-Processor
NVIDIA Tesla K40
12 GB Memory
PCIe Gen3-x16
2880 cores
for GPGPU purpose only
max. 2x per system
power cables from PSU are cabled
when ordering GPGPU exfactroy
Riser cardfor GPGPU is part of delivery
no PCIe bracket attached
G
for loose delivery
Riser is part of basic unit CX270
S26361-F2222-L40
S26361-F2222-L80
S26361-F2222-L100
max. 2x per system
power cables from PSU are cabled
when ordering GPGPU ex factroy
Riser card for GPGPU is part of delivery
no PCIe bracket attached
CX2570 M1/M2 only
24 GB Memory
PCIe Gen3-x16
4992 cores
for GPGPU purpose only
NVIDIA Tesla K80
PY PACC CP NVIDIA TeslaK80
S26361-F2222-E80
S26361-F2222-Lxxx
NVIDIATesla P100 Card with 3584 graphic cores &
16GB graphic memory. PCIe Gen3
Power cables from PSUneed to be ordered
separately.
800W PSU is recommended
PCIe *16 (Gen3) - single width - occupies space for
one PCIe slots, Full height bracket
S26361-F2222-E100
PY NVIDIA Tesla P100 for PCIe
as soon as available
S26361-F2222-Exxx
PY NVIDIA Tesla P100 for PCIe
NVIDIATesla P100 Card with 3584 graphic cores &
12GB graphic memory. PCIe Gen3
Power cables from PSUneed to be ordered
separately.
800W PSU is recommended
PCIe *16 (Gen3) - single width - occupies space for
one PCIe slots, Full height bracket
as soon as available
max. 2x per system
max. 2x per system
power cables from PSU are cabled
when ordering GPGPU ex factroy
Riser card for GPGPU is part of delivery
no PCIe bracket attached
power cables from PSU are cabled
when ordering GPGPU ex factroy
Riser card for GPGPU is part of delivery
no PCIe bracket attached
Fujitsu Technology Solutions x86 PRIMERGY Server 20 of 33