CasaTunes CT-8+ User manual

Included Items
Audio Cables
CT-4+ Qty 4
CT-8+ Qty 8 Power Cable
Qty 1
Trigger Cable Qty 1
Serial Cable Qty 1. Not used in this setup. Not supplied with CT-8+. If
you are using a CT-4+ to control an RTI, Audio Authority, Channel Vision,
SpeakerCraft, NuVo or Russound system, follow the “Quick Start Guide for
CT-4S or CT-8S Streamer”.
CasaTunes Setup
Open any browser on the
LAN and go to CasaSetup:
If you are using AirPlay speakers
to add wireless rooms, enable
sending AirPlay in the AirPlay
page.
Use CasaSetup to add names to
the sources and rooms.
Enable all of the music services
you are interested in.
Some music services require
setting up SqueezeBox. Follow
the directions in CasaSetup.
Some music services require
paid accounts, as noted in
CasaSetup.
While in Setup, change the time zone and check the Update settings. Also, you may wish to click
on Advanced Settings and use the Project Information page to create a backup of the project.
Turn on the system at this time.
PC: http://CasaServer/CasaSetup
Mac: http://CasaServer.local/CasaSetup Quick Start Guide for CT-4+ or CT-8+ System
Need Help?
Control
Use our control apps.
OR
Go to http://CasaServer/CasaTunes on any
PC, or http://CasaServer.local/CasaTunes on
any Mac connected to the network
Check out the videos at
http://www.YouTube.com/CasaTunes.
Check out our Tech Notes at
http://www.CasaTunes.com/guides.
For live help, email us at
[e-mail] or phone us at
888-855-2272
Network Cable Qty 1
Please Note!
If you purchased a CT-4+ to use as a Streamer to supply music to and control RTI,
Audio Authority, Channel Vision, SpeakerCraft, NuVo or Russound distribution
systems, see the “Quick Start Guide for CasaTunes CT-4S or CT-8S Streamer”.

Use Audio Cables to
connect Room outputs
to amplifier RCA inputs
To Speakers
OR
Connect to Amplifier(s) Connect to LAN
and Power
Network Cable Power Cable
Optional:
Keypads & Trigger input
USB Cable
(Included with
Keypad Hub) Keypad Hubs Keypads, up to 6 per Hub
(stainless faceplate optional)
Cat5 or better cable,
not included
Connect external audio devices into
Inputs.
Digital Output can be connected to any
AVR or other digital optical input.
Connect Trigger
1 output to the
trigger input on
the amplifier
Connect Doorbell or
other 12VDC signal
to Mute/Page input
Move the Remote Turn
On switch to “Trigger”
Make sure all
ZONEs are set as
illustrated (VOL
at 1 O’Clock, BUS
switches to LINE
IN and ZONE
switch set to ST)