Cascade X2000 User manual

USE AND CARE MANUAL
FOR OUTDOOR USE ONLY
ALWAYS KEEP YOUR GRILL COVERED WHEN NOT IN USE
BEFORE YOU BEGIN – We’ve included easy-to-follow, step-by-step instructions which have been carefully written to
ensure quick assembly of your grill. Reading the instructions will be a time saver in the end.
YOU WI NEED – A Phillips screwdriver, adjustable wrench, 1/2” wrench or socket and a 1/4” nut driver or socket will
be needed to assemble this grill. All other necessary hardware has been included.
X2000 Gas Grill - LP
Questions, Missing or Damaged part? DO NOT RETURN PRODUCT TO STORE
Were here to help. Just call 1-800-229-5647 or visit us at www.sureheat.com. For faster service,
have model number and serial number on hand when calling.
X2000

2
IMPORTANT SAFETY INFORMATION
-Read this manual carefully before using your grill to reduce the risk of fire, burn
hazard or other injury.
- Extreme care should be used because of the high temperatures produced by this
appliance. C ILDREN S OULD NOT BE LEFT UNATTENDED IN AN AREA
W ERE T E GRILL IS BEING OPERATED.
- This appliance must be kept clear from combustible materials, gasoline or other flammable vapors and liquids. Do not
allow flammable materials to come in contact with grate, burner or hot surfaces.
- Use only outdoors and provide good ventilation to avoid carbon monoxide build-up which could result in injury or death.
- Do not repair or replace any part of this appliance unless it is specifically recommended in this manual. A qualified
service technician should conduct all other service.
- Follow the installation and servicing instructions provided with this product. ave your grill installed by a qualified
service technician.
- Locate the main gas supply valve so that you know how to shut the gas off to your grill.
- If you smell gas, make sure all gas connections are tight before operation. If you continue to smell gas call a
qualified technician.
- When lighting a burner, always pay close attention to what you are doing and be certain you are pushing the igniter
that lights the burner you intend on using.
- Always keep your face and body as far away as from the grill as possible when lighting to reduce the risk of burn.
- Extinguish all flames and do not smoke while engaging gas and igniting the grill.
- A minimum distance of at least 15" must be maintained from any combustible material on both sides and the back of
the grill. Do not place the grill under any overhead unprotected combustible construction.
RECOGNIZE SAFETY SYMBO S, WORDS AND ABE S
WARNING indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
NOTE indicates an important piece of information that needs to
be observed to ensure the proper operation of your grill.
INSTALLER: Please retain these instructions with the owner so that they may maintain them for
future reference.
DANGER
If you smell gas:
1. Shut off gas to the appliance
2. Extinguish any open flame
3. Open lid
4. If odor continues, keep away from the
appliance and immediately call your
gas supplier or your fire department.
WARNING
1. Do not store or use gasoline or other
flammable liquids or vapors in the
vicinity of this or any other appliance.
2. An LP cylinder not connected for use
shall not be stored in the vicinity of this
or any other appliance.
Table of Contents
Welcome.................................................3
GeneralSafetyInstructions...................................4
GrillFeatures..............................................5
GettingStarted.............................................6
Assembly.................................................7-17
GasRequirements..........................................18-19
Pre-OperationLeakTesting...................................20
LightingTheGrill...........................................21
UsingTheGrill.............................................22
UsingTheRotisserie........................................23
AccessoryLighting..........................................24
CareandMaintenance.......................................25
Troubleshooting............................................26-27
Warranty..................................................28

3
Please retain this manual for future reference
© 2007 Sure eat Manufacturing All rights reserved
Congratulations on your purchase of a new grill! We are
very proud of our product and we are completely
committed to providing you with the best service
possible. Your satisfaction is our #1 priority.
Please read this Use & Care Manual very carefully. It
contains valuable information on how to properly
maintain your new grill.
We know you’ ll enjoy your new grill and thank you for
choosing our product. We hope you consider us for
future purchases.
P EASE READ AND SAVE THESE INSTRUCTIONS
This Use & Care Manual provides specific operating
instructions for your model. Use your grill only as
instructed in this manual. These instructions are not
meant to cover every possible condition and situation
that may occur. Common sense and caution must be
practiced when installing, operating and maintaining any
appliance.
Please record your model and serial numbers below for
future reference. This information is found on the serial
plate located on the inside of the grill door.
NOTE: Use only soap and water to clean serial plate.
Model Number: ______________________________
Serial Number: ______________________________
Purchase Date: ______________________________
Gas Type: __________________________________
Please complete and mail in the Product
Registration Card included with your grill.
Questions?
1-800-229-5647
for written inquiries:
Sure Heat Manufacturing
3130 Moon Station Rd
Kennesaw, GA 30144
Please attach sales receipt here for
future reference.
Register Your Product
T e PRODUCT REGISTRATION CARD
s ould be filled in completely, signed
and returned to Sure Heat Manufacturing.
AssemblyWelcome & Congratulations

4
Do not use the rotisserie in the rain.
Electrical Grounding Instructions
This appliance (rotisserie motor) is equipped with a
three-prong (grounding) plug for your protection
against shock hazard and should be plugged directly
into a properly grounded three-prong receptacle. Do
not cut or remove the grounding prong from this plug.
Keep any electrical supply cords and the fuel supply
hose away from any heated surfaces.
The pare L.P. Gas Tank Barrier must be installed to
prevent storage of spare L.P. Gas Tanks. Failure to
comply with these instructions could result in a fire or
explosion that could cause serious bodily injury, death,
or property damage.
FOR YOUR AFETY
If you smell gas:
1. hut off gas to the appliance.
2. Extinguish any open flames.
3. Open grill hood.
4. If odor continues, immediately
call your gas supplier and local Fire Dept.
CALIFORNIA PROPOSITION 65 - WARNING: The
Burning of gas cooking fuels generates some
by pro ucts which are on the list of substances which are
known by the State of California to cause cancer or
repro uctive harm. California law requires businesses to
warn customers of potential exposure to such substances.
To minimize exposure to these substances, always operate
this unit accor ing to the use an care manual, provi e
goo ventilation when cooking with gas.
This appliance is not inten e to be installe in or
on recreational vehicles or boats. FOR OUTDOOR U E ONLY
DO NOT try lighting this appliance without rea ing the
“ LIGHTING IN TRUCTION ” section of this manual.
FOR YOUR AFETY
DO NOT store or use gasoline or other flammable vapors
an liqui s in the vicinity of this or any other appliance.
An LP cylinder not connecte for use shall not be store in
the vicinity of this or any other appliance.
TE TED IN ACCORDANCE WITH AN I
Z21.58a-2006/C A 1.6a TANDARD FOR OUTDOOR
COOKING GA APPLIANCE . THI GRILL I FOR
OUTDOOR U E ONLY.
Installation must conform with local co es, this unit shoul
be installe in accor ance with the National Fuel Gas Co e
No. Z223.1/NFPA 54, National Gas an Propane Installation
Co e, CSA B149.1 or Propane Storage an Han ling Co e,
B149.2
Never attach an unregulate gas line to the appliance.
Connection to an unregulate gas line can cause excessive
heat or fire.
Always have a qualifie service technician perform ifficult
conversions or mo ifications.
Do not use the grill in garages, breezeways, she s or any
enclose area. Never operate the grill in enclose areas as
this coul lea to a carbon monoxi e buil up, which coul
result in injury or eath. Place the grill on a level surface.
Avoi moving the grill while it is operation.
NOTE: Do Not operate the main burners and infrared
back burner at the same time. This can cause warping of
the roll top grill hood.
General Sa ety Instructions

Grill Features
5
1. Roll Top Grill ood
2. Rotisserie Kit
3. Grilling/Cooking Surface
4. Side Shelf
5. Control Knob: Rear Infrared Burner
6. Control Knobs: Main Burners
7. Drawer
8. ood andle
9. Warming Shelf
10. Rear Infrared Burner
11. Side Burner
12. Control Knob: Side Burner
13. Electronic Igniter: Main Burners, Side Burner
and Rear Infrared Burner
14. Cart with Doors
1
2
3
4
5
6
7
8
9
10
11
12
14
13

Getting Started
6

Assembly
7
1b
1c
1a
1d
STEP ONE
a. Use (2) Screws secure the Rubber Door
Stop on the Cart Base.
b. Set the Cart base on the floor and then lay the
Caster Assembly Left on the left side and the
Caster Assembly Right on the right side of the Cart
Base. The angled side of the Cart Base will be
towards the front of the base.
c. Pick up the left side of the Cart Base and set the
Caster Assembly Left in place by inserting the
attached bolts through the three (3) holes in the
Cart Base.
d. Pick up the right side of the Cart Base and set the
Caster Assembly right in place by inserting the
attached bolts through the three (3) holes in the
Cart Base.

Assembly
8
2a
2c
2d
2b 2f
2e
STEP TWO
a. Place the Cart Side Left onto the two (2) outer fixed
caster assembly bolts, make sure the large flange
is toward the front of the Cart Base.
b. Secure the Cart Side Leftt in place by hand
tightening nuts onto the caster assembly bolts.
c. Place the Cart Back onto the two (2) rear caster
assembly bolts.
d. Secure the Cart Back in place by hand tightening
the Caster Assembly Nuts onto the caster assembly bolts.
e. Place the Cart Side Right onto the two (2) outer
swivel caster assembly bolts, make sure the large
flange is toward the front of the Cart Base.
f. Secure the cart side right in place by hand
tightening nuts onto the caster assembly bolts.
Note: The Cart Back is covered by the card sides.

Assembly
9
The Spare .P. Gas Tank
Barrier must be installed to
prevent storage of spare .P. Gas Tanks.
Failure to comply with these instructions
could result in a fire or explosion that could
cause serious bodily injury, death, or
property damage.
3a
3e
3f
3d
STEP THREE
a. Press the cart sides back together making sure that the cart
side flanges cover the cart back flange.
b. Attach three (3) self tapping screws through the pre-drilled
holes on the Cart Side Left into the cart back. Repeat for Cart
Side Right.
c. Tighten all six (6) caster assembly nuts with a wrench.
d. Slide the Tank Tray out of the bracket, and place the it on the
Cart Base, the handle of the tray toward front of the Cart Base.
Attach three (3) self tapping screws through the pre-drilled holes
on the Left Bracket into the Cart Base. Repeat on the Bracket
Right. Then Slide the tray into the Bracket.
e. Attach the Spare L.P. Gas Tank Barrier by inserting the tabs
into the slots in the Cart Back and then attach the flat end of the
barrier to the pre-drilled hole in the Cart Back with a self-tapping
screw.
f. Attach the Tank Secure Ring onto the Cart Back.

Assembly
10
3c
3a 3a
3c
3b
STEP FOUR
a. Attaching (2) Self Tapping Screws through the pre-drilled
holes on the Left Bracket for the Cart Door Pin into the Cart Side
Left. Repeat on the Bracket Right.
b. Attaching (4) Self Tapping Screws through the pre-drilled
holes on the two Bracket for the Cart Door Magnet into the Cart
Cross Brace.
c. Install Cart Cross Brace onto the Cart Sides by secure (2) self
tapping screws though the pre drilled holes on each end of the
Cart Cross Brace into the top of the cart side flanges.