Casio FX-9860GII - SOFTWARE VERSION 2-00 User manual

01
Examination Mode
fx-9860GII Software Version 2.09
This mode allows you to quickly prepare your calculator for exams.
This mode restricts access to Memory mode, Program mode, eActivity, vector commands,
Program commands( W(output command), : (multi-statement command), l(carriage return)),
E-CON3 mode, data transfer, add-in applications, add-in languages, storage memory access, user
name editing, so these modes and functions are not available during exams.
User data (main memory) is backed up. The backed up data will be restored when you exit
Examination Mode. There are three ways to exit Examination Mode. You can exit Examination
Mode after the examination.
Entering Examination Mode
1. Press LO( OFF) to turn off the calculator.
2. While holding down the jand 7keys, press Okey.
4. Press w( Continue? ) .
3. Press q(Yes).
5. Press d
Now Examination Mode is completed !!
1

02
Calculator Operation in Examination Mode
1. Entering Examination Mode causes icon to flash on the
display. The flash rate of the icon slows down about 15
minutes after entering Examination Mode.
2. Pressing an causes the dialog box shown below to
appear. The dialog box shows the elapsed time in
Examination Mode.
2
Exiting Examination Mode
Exiting Examination Mode by Connecting to a computer
1. Use the USB cable to connect the calculator that is in the Examination Mode to a computer.
There are three ways to exit Examination Mode.
2. When the “Select Connection Mode” dialog box appears on
the calculator, press the calculator’ s qkey.
3
1
4. On the computer, click the toolbar button .
3. On the computer, start up the FA-124 software.
fx-9860GII Software Version 2.09

Exiting Examination Mode by Allowing 12 Hours to Elapse
Approximately 12 hours after entering Examination mode, turning the calculator on will cause it to
exit Examination mode automatically.
2
03
Now you exited Examination Mode!!
Exiting Examination Mode by Connecting to another Calculator.
1. On the calculator that is in Examination Mode (Calculator
A). enter Link mode and then press r(CABL) w(3PIN.)
2. Use the SB-62 cable to connect Calculator A to another calculator that is not in Examination
Mode (Calculator B)
3
3. On Calculator A, press w(RECV).
5. Press d.
fx-9860GII Software Version 2.09

04
5. On Calculator A press d
6. Now you exited Examination Mode!!
4. On Calculator B, enter Link mode and then press e
(EXAM) q(UNLOCK) q(Yes).
fx-9860GII Software Version 2.09