Casio fx-CG50 User manual

Casio fx-CG50
Setting Up Guide

Contents
3
Attaching and Removing the Front Cover
4
Key Layout and Markings
5
Switching On
6
Status Bar
8
Memory Reset
9
If results don’t display as you expect …
10
Changing Hardware Settings
12
Downloading Add
-In Applications
2

Attaching and Removing the Front Cover
3
•To remove the front cover
Before using the calculator, remove the front cover and attach it to the back.
•To attach the front cover
When you are not using the calculator, attach the front cover to the front.

Key Layout and Markings
Many of the calculator’s keys are used to perform more than one
function.
The functions marked on the keyboard are colour-coded.
4

Switching On
Press O.
The calculator will show the Main Menu unless it has been switched off whilst in one of the menu options.
If the Main Menu does not appear, press p.
Your menu may not have all of the icons below
–please see “Downloading Add-In Applications” at the end.
For instructions on how to use each menu, please see the Getting Started guide.
5

Status Bar
The status bar is an area that displays messages and the current status of the calculator.
It is always displayed at the top of the screen.
6
This icon:
Indicates this:
The current battery level.
The icons indicated (from left to right): Level 3, Level 2, Level 1, Dead.
Calculation in progress.
SHIFT key was pressed and the calculator is standing by for the next key operation
ALPHA key was pressed and the calculator is standing by for the next key operation.
The A icon indicates the lower
-case input (eActivity and Program modes only).
Alpha Lock is in effect.
SHIFT 8 (CLIP) was pressed and the calculator is standing by for range specification.

Status Bar –SETUP
The calculator can be set for a variety of mathematical defaults.
For more information on setup, please see the Getting Started guide.
7
This icon:
Indicates this:
Setup “Input/Output” setting.
Setup “Angle” setting.
Setup “Display” setting.
Setup “
Frac Result” setting.
Setup “Complex Mode” setting.

1. Press pto choose the Main Menu screen if you are not already there.
2. Scroll down to menu option G System.
3. Press l(bottom right hand corner).
4. System Manager menu appears –press yfor RESET.
5. Then press wfor MAIN (memory). This deletes everything you have entered but not saved.
6. Message asks “Reset OK? Main Memory”. Press qfor Yes.
7. Message says “Reset! Main Memory”.
Press dtwice then pto return to the Main Menu.
Memory Reset
8

If results don’t display as you expect …
If you keep having problems when you are trying to perform operations,
try the following before assuming that there is something wrong with the calculator.
9
Returning the calculator to its original settings
1. From the Main Menu, choose G System.
2. Press yfor RESET.
3. Press qfor SETUP, and then press q(YES).
4. Press dp to return to the main menu.
Now enter your chosen menu and perform the calculation again.
You may need to change some of the SETUP settings. Please see “Status Bar – Setup”.

Changing Hardware Settings
From the Main Menu, scroll down to menu option G System.
Press l(bottom right hand corner).
Press qfor “Display Settings” which adjusts the Backlight Level
–it is best to set it to 4 or 5
–press dto come out of the menu.
Press wfor “Power Properties” to adjust Auto Power Off duration and the Backlight Duration
–press dto come out of the menu.
Press efor “Language”
–English is at the top
–press q(SELECT) then dtwice to return to the System Manager menu.
Press pto return to the Main Menu.
10