Casio Exilim EX-P505 User manual

E
Digital Camera
EX-P505
User’s Guide
K831PCM1DMX
Thank you for purchasing this CASIO
product.
• Before using it, be sure to read the
precautions contained in this User’s Guide.
• Keep the User’s Guide in a safe place for
future reference.
• For the most up-to-date information about
this product, visit the official EXILIM
Website at http://www.exilim.com/.

INTRODUCTION
2
INTRODUCTION
Rechargeable Lithium Ion
Battery (NP-40)
CD-ROMs (2) USB Cable Basic Reference
Camera
AV Cable
Unpacking
Check to make sure that all of the items shown below are included with your camera. If something is missing, contact your
dealer as soon as possible.
Rapid Charger (BC-30L)
(Power Cord Type) AC Power Cord
*
*The shape of the AC power
cord plug varies according to
country or geographic area.
○○○○○○○○
•Note that the shape of the rapid charger depends on the area where you purchased the camera.
Rapid Charger (BC-30L)
(Plug-in Type)
ON/OFF
Lens cap/cap holder Lens hood
Strap

INTRODUCTION
3
Contents
2INTRODUCTION
Unpacking .................................................................... 2
Features ....................................................................... 9
Precautions ................................................................ 12
General Precautions 12
16 QUICK START GUIDE
First, charge the battery! ............................................ 16
To configure display language and clock settings ..... 18
To record an image .................................................... 19
To view a recorded image .......................................... 20
To delete an image ..................................................... 20
To turn off the camera ................................................ 21
22 GETTING READY
About This Manual ..................................................... 22
General Guide ............................................................ 23
Using the Monitor Screen .......................................... 26
Monitor Screen Contents ........................................... 28
REC Modes 28
PLAY Mode 33
Changing the Contents of the Monitor Screen 34
Attaching the Strap .................................................... 36
Using the Lens Cap ................................................... 37
Power Requirements ................................................. 37
Using the Rapid Charger 37
To load the battery 42
To replace the battery 46
Power Supply Precautions 46
Using AC Power 49
Turning the Camera On and Off 51
Configuring Power Saving Settings 52
Using the On-screen Menus ...................................... 53
Configuring Display Language and Clock Settings ... 56
To configure display language and clock settings 57

INTRODUCTION
4
59 BASIC IMAGE RECORDING
Recording an Image ................................................... 59
Specifying the Recording Mode 59
Aiming the Camera 61
Recording an Image 62
Using Zoom ................................................................ 66
Optical Zoom 66
Digital Zoom 67
Using the Flash .......................................................... 69
Flash Unit Status 72
Changing the Flash Intensity Setting 72
Using Flash Assist 73
Using the Self-timer ................................................... 75
Specifying Image Size ............................................... 77
Specifying Image Quality ........................................... 79
80 OTHER RECORDING FUNCTIONS
Selecting the Focus Mode ......................................... 80
Using Auto Focus 81
Using the Macro Mode 84
Using Pan Focus 85
Using the Infinity Mode 85
Using Manual Focus 86
Using Focus Lock 87
Exposure Compensation (EV Shift) ........................... 88
Using the Built-in ND Filter ........................................ 90
To turn the ND filter on and off 90
Adjusting White Balance ............................................ 91
Configuring the White Balance Setting Manually 92
Specifying the Exposure Mode .................................. 94
Using Aperture Priority AE 94
Using Shutter Speed Priority AE 96
Setting Exposure Settings Manually 97
Using Manual Assist On-screen Guidance 99
Exposure Mode Recording Precautions 100
Using the BEST SHOT Mode .................................. 100
Creating Your Own BEST SHOT Setup 102
To delete a BEST SHOT user setup 104
Recording a Movie ................................................... 104
Specifying Movie Image Quality 105
Recording a Standard Movie (Movie Mode) 106
Recording Past Action (Past Movie Mode) 107
Recording a Short Movie (Short Movie Mode) 108

INTRODUCTION
5
Instant Movie Setups
(MOVIE BEST SHOT Mode) ..................................... 111
Creating Your Own MOVIE BEST SHOT Setup 112
Recording Audio ........................................................ 114
Adding Audio to a Snapshot 114
Using the Histogram ................................................. 116
REC Mode Camera Settings .................................... 118
Specifying ISO Sensitivity 119
Selecting the Metering Mode 120
Using the Filter Function 121
Specifying Outline Sharpness 121
Specifying Color Saturation 122
Specifying Contrast 122
Turning the On-screen Grid On and Off 123
Turning Image Review On and Off 123
Using Icon Help 124
Assigning Functions to the [] and [] Keys 125
Specifying Power On Default Settings 125
Resetting the Camera 127
Using the Shortcut Menu (EX Menu) ....................... 128
Installing the Lens Hood and a Lens Filter .............. 129
130 PLAYBACK
Basic Playback Operation ........................................ 130
Playing an Audio Snapshot 131
Zooming the Display Image ..................................... 132
Resizing an Image ................................................... 133
Cropping an Image ................................................... 135
Playing and Editing a Movie .................................... 136
Playing a Movie 136
Editing a Movie 138
Capturing a Still Image from a Movie
(MOTION PRINT) 141
Displaying the 9-image View ................................... 143
Playing a Slideshow ................................................. 144
Rotating the Display Image ...................................... 146
Adding Audio to a Snapshot .................................... 147
To re-record audio 148
Displaying Camera Images on a TV Screen ........... 149
Selecting the Video Input System 151
152 DELETING FILES
Deleting a Single File ............................................... 152
Deleting All Files ...................................................... 153

INTRODUCTION
6
154 FILE MANAGEMENT
Folders ..................................................................... 154
Memory Folders and Files 154
Protecting Files ........................................................ 155
To protect a single file 155
To protect all files in memory 156
157 OTHER SETTINGS
Configuring Sound Settings ..................................... 157
To configure sound settings 157
To set the confirmation tone volume level 158
To set the audio volume level for movie and audio
snapshot playback 158
Specifying the File Name Serial Number
Generation Method .................................................. 159
Setting the Clock ...................................................... 159
To select your Home Time zone 160
To set the current time and date 161
Changing the Date Format 161
Using World Time ..................................................... 162
To display the World Time screen 162
To configure World Time settings 162
Changing the Display Language ............................. 163
Changing the USB Port Protocol ............................. 164
Formatting Built-in Memory ...................................... 165
166 USING A MEMORY CARD
Using a Memory Card .............................................. 167
To insert a memory card into the camera 167
To replace the memory card 168
Formatting a Memory Card 169
Copying Files ........................................................... 170
To copy all the files in built-in memory to a
memory card 171
To copy a specific file from a memory card to
built-in memory 171
173 PRINTING IMAGES
DPOF ........................................................................ 174
To configure print settings for a single image 175
To configure print settings for all images 176
Using PictBridge ....................................................... 177
Date Printing 181
PRINT Image Matching III ............................................ 182
Exif Print ................................................................... 182
183 VIEWING IMAGES ON A COMPUTER
Using the Camera with a Windows Computer ........ 183
Using the Camera with a Macintosh Computer ....... 191

INTRODUCTION
7
Using a Memory Card to Transfer Images to a
Computer .................................................................. 196
Memory Data ............................................................ 197
DCF Protocol 197
Memory Folder Structure 197
Image Files Supported by the Camera 199
200 USING THE CAMERA WITH A COMPUTER
Using the Camera with a Windows Computer ........ 200
About the bundled CD-ROM 200
Computer System Requirements 202
Managing Images on a PC 204
Retouching, Reorienting, and Printing a Snapshot 207
Playing a Movie 209
Editing a Movie 212
Viewing User Documentation (PDF Files) 213
User Registration 214
Exiting the Menu Application 214
Using the Camera with a Macintosh Computer ....... 215
About the bundled CD-ROM 215
Computer System Requirements 216
Managing Images on a Macintosh 217
Viewing User Documentation (PDF Files) 218
To register as a camera user 218
219 APPENDIX
Menu Reference ....................................................... 219
Indicator Lamp Reference ....................................... 221
Troubleshooting Guide ............................................. 224
If you have problems installing the USB driver... 228
Display Messages 229
Specifications ........................................................... 231

INTRODUCTION
8
IMPORTANT!
•The contents of this manual are subject to change
without notice.
•CASIO COMPUTER CO., LTD. assumes no
responsibility for any damage or loss resulting from
the use of this manual.
•CASIO COMPUTER CO., LTD. assumes no
responsibility for any loss or claims by third parties
which may arise through the use of the EX-P505.
•CASIO COMPUTER CO., LTD. shall not be held
liable for any damages or losses suffered by you or
any third party due to the use of Photo Loader and/or
Photohands.
•CASIO COMPUTER CO., LTD. assumes no
responsibility for any damage or loss caused by
deletion of data as a result of malfunction, repairs, or
battery replacement. Be sure to back up all important
data on other media to protect against its loss.
•Note that the example screens and product
illustrations shown in this User’s Guide may differ
somewhat by the screens and configuration of the
actual camera.
• The SD logo is a registered trademark.
• Windows, Internet Explorer, Windows Media, and
DirectX are registered trademarks of Microsoft
Corporation.
• Macintosh is a registered trademark of Apple
Computer, Inc.
• MultiMediaCard is a trademark of Infineon
Technologies AG of Germany, and licensed to the
MultiMediaCard Association (MMCA).
• Adobe and Reader are either registered trademarks
or trademarks of Adobe Systems Incorporated in the
United States and/or other countries.
• Ulead is a trademark of Ulead Systems, Inc.
• Other company, product and service names used
herein may also be trademarks or service marks of
others.
• Photo Loader and Photohands are the property of
CASIO COMPUTER CO., LTD. Except as stipulated
above, all copyrights and other related rights to these
applications revert to CASIO COMPUTER CO., LTD.

INTRODUCTION
9
Features
•5.0 million effective pixels
The CCD provides 5.25 million total pixels of very high-
resolution for crisp, clear, prints and display images.
•2.0-inch TFT color LCD swivel monitor screen
•40X zoom (page 66)
5X optical zoom, 8X digital zoom
•High-resolution movie recording with audio (page 104)
VGA size, 30 fps, MPEG-4 AVI format
•A choice of movie modes (page 104)
Movie modes include a standard Movie mode, a Past
Movie mode (movie starts from five seconds before the
shutter button was pressed), and Short Movie mode
(movie is a preset length that starts before the shutter
button was pressed and ends after it is pressed), and a
MOVIE BEST SHOT mode (instant camera setup based
on MOVIE BEST SHOT sample scenes).
•MOTION PRINT (page 141)
Capture frames from a movie and create still images that
are suitable for printing.
•7.5MB flash memory
Images can be recorded without using a memory card.
■LCD Panel
The LCD panel is a product of the latest LCD
manufacturing technology that provides a pixel yield of
99.99%. This means that less than 0.01% of the total pixels
are defective (they do not turn on or always remain turned
on).
■Copyright Restrictions
Except for the purposes of your own personal enjoyment,
unauthorized copying of snapshot files, movie files, and
audio files violates copyright laws and international
contracts.
Distribution to third parties of such files over the Internet
without permission of the copyright holder, whether for
profit or for free, violates copyright laws and international
contracts.

INTRODUCTION
10
•Ex Finder view (page 32)
The Ex Finder view provides you with a wealth of
information on the monitor screen as you compose your
images.
•Ex Menu (page 128)
Ex Menu gives you short-cut menu access to four
frequently-used settings.
•Multi Auto Focus (page 83)
When “Multi”is selected for the Auto Focus area, the
camera takes simultaneous meter readings at seven
different points and automatically selects the best one.
•Movable Auto Focus (AF) Area (page 82)
You can move the focus area to the location you want.
•Manual Assist (page 99)
Follow the on-screen guidance when configuring manual
exposure settings.
•Support for SD memory cards and MMC (MultiMedia
Cards) for memory expansion (page 166)
•BEST SHOT (page 100)
Simply select the sample scene that matches the type of
image you are trying to record and the camera performs
troublesome setups automatically for beautiful pictures
every time.
•Triple Self-timer (page 75)
The self-timer can be set up to repeat three times,
automatically.
•Real-time RGB histogram (page 116)
An on-screen histogram lets you adjust exposure as you
view the effect on overall image brightness, which makes
shooting under difficult lighting conditions easier than
ever before.
•World Time (page 162)
A simple operation sets the current time for your current
location. You can select from among 162 cities in 32 time
zones.
•Audio Snapshot Mode (page 114)
Use this mode to record snapshots that also include
audio.
•After Recording (page 147)
Use this mode to add audio to snapshots after you record
them.
•Selectable Sound Settings (page 157)
You can configure different sounds to play whenever you
turn on the camera, press the shutter button half-way or
all the way, or perform a key operation.
•DCF Data Storage (page 197)
DCF (Design rule for Camera File system) data storage
protocol provides image compatibility between the digital
camera and printers.

INTRODUCTION
11
•Digital Print Order Format (DPOF) (page 174)
Images can be printed easily in the sequence you want
using a DPOF compatible printer. DPOF can also be used
when specifying images and quantities for printing by
professional print services.
•PRINT Image Matching III Compatible (page 182)
Images include PRINT Image Matching III data (mode
setting and other camera setup information). A printer that
supports PRINT Image Matching III reads this data and
adjusts the printed image accordingly, so your images
come out just the way you intended when you recorded
them.
•PictBridge support (page 177)
Connect directly to a PictBridge compatible printer and
you can print images without going through a computer.
•Transfer images to a computer simply by connecting the
camera with a USB cable (pages 183, 200)
•USB 2.0 Hi-Speed protocol support (pages 184, 192)
This camera supports USB 2.0 Hi-Speed protocol.
Though it can be used with a computer that supports only
USB 1.1 protocol, higher speed data transfer becomes
possible when USB 2.0 Hi-Speed is supported.
•Connect the camera to a TV with the AV cable and use
the TV screen for image recording and viewing (page
149)
•Ulead Movie Wizard SE VCD (page 212)
Bundled Ulead Movie Wizard SE VCD software lets you
edit movie files on your computer and create Video CDs.
Software can be upgraded to convert files so they can be
played by a DVD player.
•Bundled with Photo Loader and Photohands (pages 204,
207, 216)
Your camera comes bundled with Photo Loader, the
popular application that automatically loads images from
your camera to your PC. It also comes with Photohands,
and application that makes image retouching quick and
easy.

INTRODUCTION
12
•Never fire the flash while it is too close to the subject’s
eyes. Intense light from the flash can cause eye damage
if it is fired too close to the eyes. This is especially true
with young children. When using the flash, the camera
should be at least one meter (3.3´) from the eyes of the
subject.
•Keep the camera away from water and other liquids, and
never let it get wet. Moisture creates the risk of fire and
electric shock. Never use the camera outdoors in the rain
or snow, at the seashore or beach, in the bathroom, etc.
•Should foreign matter or water ever get into the camera,
immediately turn it off. Next, remove the camera’s battery
and/or unplug the AC adaptor power cord from the power
outlet, and contact your dealer or nearest CASIO
authorized service center. Using the camera under these
conditions creates the risk of fire and electric shock.
•Should you ever notice smoke or a strange odor coming
out of the camera, immediately turn it off. Next, taking
care you do not burn your fingers, remove the camera’s
battery and/or unplug the AC adaptor power cord from the
power outlet, and contact your dealer or nearest CASIO
authorized service center. Using the camera under these
conditions creates the risk of fire and electric shock. After
making sure there is no more smoke coming from the
camera, take it to your nearest CASIO authorized service
center for repair. Never attempt your own maintenance.
Precautions
General Precautions
Be sure to observe the following important precautions
whenever using the EX-P505.
All references in this manual to “camera”refer to the
CASIO EX-P505 Digital Camera.
•Never try to take pictures or use the built-in display while
operating a motor vehicle or while walking. Doing so
creates the risk of serious accident.
•Never try to open the case of the camera or attempt your
own repairs. High-voltage internal components create the
risk of electric shock when exposed. Always leave
maintenance and repair work up to a CASIO authorized
service center.
•Keep the small parts and accessories of this camera out
of the reach of small children. If swallowed accidentally,
contact your physician immediately.
•Never fire the flash in the direction of a person operating
a motor vehicle. Doing so can interfere with the driver’s
vision and create the risk of accident.

INTRODUCTION
13
•Never use the AC adaptor to power any other device
besides this camera. Never use any other AC adaptor
besides the one that comes with this camera.
•Never cover the AC adaptor with a quilt, blanket, or other
cover while it is in use, and do not use it near a heater.
•At least once a year, unplug the AC adaptor power cord
from the power outlet and clean the area around the
prongs of the plug. Dust build up around the prongs can
create the risk of fire.
•If the camera’s case should ever become cracked due to
dropping it or otherwise subjecting it to rough treatment,
immediately turn it off. Next, remove the camera’s battery
and/or unplug the AC adaptor power cord from the power
outlet, and contact your dealer or nearest CASIO
authorized service center.
•Never use the camera inside of an aircraft or in any other
area where its use is prohibited. Doing so creates the risk
of accident.
•Physical damage and malfunction of this camera can
cause the data stored in its memory to be deleted. Always
keep backup copies of data by transferring them to
personal computer memory.
•Never open the battery cover, disconnect the AC adaptor
from the camera, or unplug the AC adaptor from the wall
socket while an image is being recorded. Doing so will not
only make storage of the current image impossible, it can
also corrupt other image data already stored in file
memory.

INTRODUCTION
14
Any of the above conditions can cause an error message to
appear on the monitor screen (page 229). Follow the
instructions provided by the message to eliminate the
cause of the error.
■Operating conditions
•This camera is designed for use in temperatures ranging
from 0°C to 40°C (32°F to 104°F).
•Do not use or keep the camera in the following areas.
—In areas subject to direct sunlight
—In areas subject to high humidity or dust
—Near air conditioners, heaters, or other areas subject
to temperature extremes
—Inside of a closed vehicle, especially one parked in the
sun
—In areas subject to strong vibration
■Test for proper operation before using the
camera!
Before using the camera to record important images, make
sure you first record a number of test images and check the
results to ensure that the camera is configured correctly
and operating properly.
■Data Error Precautions
•Your digital camera is manufactured using precision
digital components. Any of the following creates the risk
of corruption of data in file memory.
—Removing the battery or memory card while the
camera is performing a record or memory access
operation
—Removing the battery or memory card while the
operation lamp is still flashing after you turn off the
camera
—Disconnecting the USB cable while a data
communication operation is being performed
—Low battery power
—Other abnormal operations

INTRODUCTION
15
■Lens
•Never apply too much force when cleaning the surface of
the lens. Doing so can scratch the lens surface and cause
malfunction.
•Fingerprints, dust, or any other soiling of the lens can
interfere with proper image recording. Never touch the
lens with your fingers. You can remove dust particles
from the lens surface by using a lens blower to blow them
off. Next, wipe the surface of the lens with a soft lens
cloth.
•You may sometimes notice some distortion in certain
types of images, such as a slight bend in lines that should
be straight. This is due to the characteristics of lens, and
does not indicate malfunction of the camera.
■Other
•The camera may become slightly warm during use. This
does not indicate malfunction.
•If the exterior of the camera needs cleaning, wipe it with a
soft, dry cloth.
■Condensation
•When you bring the camera indoors on a cold day or
otherwise expose it to a sudden change of temperature,
there is the possibility that condensation can form on the
exterior or on interior components. Condensation can
cause malfunction of the camera, so you should avoid
exposing it to conditions that might cause condensation.
•To keep condensation from forming, place the camera
into a plastic bag before moving it into a location that is
much warmer or colder than your current location. Leave
it in the plastic bag until the air inside the bag has a
chance to reach the same temperature as the new
location. If condensation does form, remove the battery
from the camera and leave the battery cover open for a
few hours.
■Power Supply
•Use only the special NP-40 rechargeable lithium ion
battery to power this camera. Use of any other type of
battery is not supported.
•This camera does not have a separate battery for the
clock. The date and time settings of the camera are
cleared whenever power is totally cut off (from both the
battery and AC adaptor). Be sure to reconfigure these
settings after power is interrupted (page 56).

QUICK START GUIDE
16
QUICK START GUIDE
Plug-in Type
[CHARGE] lamp lights red
during charging.
[CHARGE] lamp turns
green when charging is
complete.
[CHARGE] lamp lights
red during charging.
[CHARGE] lamp turns
green when charging
is complete.
1
2
2
1
Power Cord Type
1. Charge the rechargeable lithium ion battery (NP-40)
that comes with the camera (page 37).
• Note that the shape of the rapid charger depends on the
area where you purchased the camera.
• It takes about two hours to achieve a full charge.
First, charge the battery!

QUICK START GUIDE
17
2. Load the battery into the camera (page 42).
2
3
Stopper
1

QUICK START GUIDE
18
1. Open the monitor screen to turn on the camera.
• You can also turn on the camera by pressing the power button.
2. Press [왖] to select the language you want.
3. Press [SET] to register the language setting.
4. Use [왖], [왔], [왗], and [왘] to select the geographical
area you want, and then press [SET].
5. Use [왖] and [왔] to select the city you want, and then
press [SET].
6. Use [왖] and [왔] to select the summer time (DST) setting
you want, and then press [SET].
7. Use [왖] and [왔] to select the date format setting you
want, and then press [SET].
8. Set the date and the time.
9. Press [SET] to register the clock settings and exit the
setting screen.
To configure display language and clock settings
• Be sure to configure the following settings
before using the camera to record images.
See page 56 for details.
11
2, 3, 4, 5, 6, 7, 8, 9

QUICK START GUIDE
19
22
4,5
3
1920N
1920N
2560
2560
3
05/
05/
12
12
/24
24
12
12
:38
38
+0.0
0.0
+–
To record an image
See page 59 for details.
Snapshot mode icon
Focus frame
1. Remove the lens cap from the lens.
2. Open the monitor screen to turn on the camera.
• You can also turn on the camera by pressing the power
button.
3. Align the mode dial with “ ” (Snapshot mode).
• This causes “ ” (Snapshot mode) to appear on the
monitor screen.
4. Point the camera at the subject, use the monitor
screen to compose the image, and then press the
shutter button half way.
• When the camera finishes its Auto Focus operation, the
focus frame will turn green and the operation lamp will light
green.
5. Holding the camera still, gently press the shutter
button all the way down.
Operation lamp
Before using a commercially available memory card, be sure
to first format it using the camera’s formatting procedure. For
details about formatting a memory card, see page 169.
1
B

QUICK START GUIDE
20
1. Open the monitor screen to turn on the camera.
• You can also turn on the camera by pressing the power button.
2. Align the mode dial with “ ” (PLAY mode).
3. Press [왔] ( ).
4. Use [왗] and [왘] to display the image you want to delete.
5. Use [왖] and [왔] to select “Delete”.
• To exit the image delete operation without deleting anything, select
“Cancel”.
6. Press [SET] to delete the image.
To delete an image
See page 152 or details.
1. Open the monitor screen to turn
on the camera.
• You can also turn on the camera by
pressing the power button.
2. Align the mode dial with “ ”
(PLAY mode).
3. Use [왗] and [왘] to scroll
through the images.
To view a recorded image
See page 130 or details.
12
3, 4, 5, 6
1
1
2
3
1