Casio QV-200 User manual

Liquid Crystal Digital Camera
QV-200
Owner’s Manual
英
REC
PLAY
DEL
MODEDISP
EFFECT
PROTECT
ON/OFF
POWER
If you need help
with your ca era,
please call:
1(800)435-7732
2
Introduction
Congratulations upon your selection of the QV-200 Liquid Crystal
Digital Camera. The QV-200 comes with its own uilt-in liquid crystal
color monitor that let’s you instantly view the pictures you take.
To get the most out of the QV-200, e sure to carefully read this
manual and follow the instructions contained in it.
3
Contents
Precautions ..........................................................5
Unpacking.............................................................9
General Guide ....................................................10
Top and Display .................................................................. 10
Lens .................................................................................... 10
Bottom ................................................................................ 11
Terminals ............................................................................ 11
Power Supply ..................................................... 13
To load atteries ................................................................. 13
Using AC Power ................................................................. 17
Recording I ages..............................................19
To record an image............................................................. 19
How to avoid hand movement…......................................... 21
Fluorescent Lighting ........................................................... 21
Infrared Light....................................................................... 22
Shooting Images Outdoors ................................................. 22
Changing the Lens Orientation ........................................... 22
NORMAL/MACRO Switch .................................................. 24
Resolution Modes ............................................................... 24
Exposure Adjustment.......................................................... 25
Changing the Aperture Setting ........................................... 26
Record Mode Displays........................................................ 27
Using the Self-Timer ........................................................... 30
Playing Back I ages ......................................... 31
Displaying Images on the Camera’s LCD ........................... 31
Displaying Images on a TV Screen .................................... 32
Page Status Indicators........................................................ 33
Producing a Multi-Page Display.......................................... 34
Using the Zoom Function.................................................... 36
4
Superimposing a Title on an Image .................................... 38
Rotating an Image .............................................................. 42
Filtering an Image ............................................................... 44
Using Auto Play .................................................................. 45
Protecting Memory Pages .................................................. 48
Unprotecting Memory Pages .............................................. 50
Hiding Protected Memory Pages ........................................ 52
Deleting Me ory Pages ....................................53
Deleting Images From Memory .......................................... 53
Resolution Conversion......................................57
Connecting to Other Devices............................58
The camera terminals ......................................................... 58
Using the Ca era with a Connected Device ...59
Troubleshooting.................................................66
Specifications.....................................................73
About the ca era’s backlight… ....................... 75
• CASIO COMPUTER CO., LTD. assumes no responsi ility for any
damage or loss resulting from the use of this manual.
• CASIO COMPUTER CO., LTD. assumes no responsi ility for any
loss or claims y third parties which may arise through the use of
the QV-200.
• CASIO COMPUTER CO., LTD. assumes no responsi ility for any
damage or loss caused y deletion of data as a result of malfunc-
tion, repairs, or attery replacement. Be sure to ack up all impor-
tant data on other media to protect against its loss.

5
General Precautions
Be sure to o serve the following important precautions whenever us-
ing the QV-200.
All references in this manual to “this camera” and “the camera” refer
to the CASIO QV-200 Digital Camera.
• Never try to take pictures or use the uilt-in display while operating
a motor vehicle or while walking. Doing so creates the danger of
serious accident.
• Never try to open the case of the camera or attempt your own re-
pairs. High-voltage internal components create the risk of electrical
shock when exposed. Always leave maintenance and repair work
up to authorized CASIO service providers.
• Keep the camera away from water and other liquids, and never let it
get wet. Moisture creates the danger of fire and electrical shock.
Never use the camera outdoors in the rain or snow, at the seashore
or each, in the athroom, etc.
• Should foreign matter or water ever get into the unit, immediately
turn power off, unplug the AC adaptor from the power outlet, and
contact your dealer or nearest CASIO service provider. Using the
unit under these conditions creates the danger of fire and electrical
shock.
• Should you ever notice smoke or a strange odor coming out of the
unit, immediately turn power off and unplug the AC adaptor from the
power outlet. Using the unit under these conditions creates the dan-
ger of fire and electrical shock. After making sure there is no more
smoke coming from the unit, take it to your nearest CASIO service
provider for repair. Never attempt your own maintenance.
• If the unit’s case should ever ecome cracked due to dropping it or
otherwise su jecting it to rough treatment, immediately turn power
off, unplug the AC adaptor from the power outlet, and contact your
nearest CASIO service provider.
Precautions Liquid Crystal Digital Camera
6
• Never use the unit inside of an air craft or in any other areas where
its use is prohi ited. Doing so can result in an accident.
• Physical damage and malfunction of this unit can cause the image
data stored in its memory to e deleted. Be sure to always keep
ackup copies of data y transferring them to personal computer
memory.
• Never open the attery compartment cover, disconnect the AC
adaptor from the camera or unplug it from the wall socket while the
“WAIT” message is on the LCD. Doing so will not only make storage
of the current image impossi le, it can also corrupt other image data
already stored in camera memory.
MEMORY ERROR essage
Any of the following can cause data stored in the camera’s memory to
ecome corrupted.
• Removal of atteries or disconnection of the AC adaptor during a
record or data communication operation
• Disconnection of the connecting ca le during data communication
• Continued use while attery power is low.
• Other incorrect operation
In each of the a ove cases, one of the memory error messages
(MEMORY ERROR #1 ~ MEMORY ERROR #4) appears, and further
operation of the camera will ecome impossi le. See page 72 for
details on what to do in the case of MEMORY ERROR #1, #2, or #3.
When MEMORY ERROR #4 appears, contact your dealer or the
nearest CASIO service provider as soon as possi le.
7
Operating conditions
• This camera is designed for use in temperatures ranging from 0°C
to 40°C (32°F to 104°F).
• Do not use or keep the camera in the following areas.
— In areas su ject to direct sunlight
— In areas su ject to high humidity or dust
— Near air conditioners, heaters, or other areas su ject to tem-
perature extremes
— Inside of a closed vehicle, especially one parked in the sun
— In areas su ject to strong vi ration
Condensation
• When you ring the camera indoors on a cold day or otherwise ex-
pose it to a sudden change of temperature, there is the possi ility
that condensation can form on the exterior or on interior compo-
nents. Condensation can cause malfunction of the camera, so you
should avoid exposing it to conditions that might cause condensa-
tion.
• To keep condensation from forming, place the camera into a plastic
ag efore moving it into a location that is much warmer or colder
than your current location. Leave it in the plastic ag until the air
inside the ag has a chance to reach the same temperature as the
new location. If condensation does form, remove the atteries from
the camera and leave the attery compartment cover open for a few
hours.
Precautions Liquid Crystal Digital Camera
8
NOTICE
This equipment has een tested and found to comply with the lim-
its for a Class B peripheral, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasona le protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency en-
ergy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful inter-
ference to radio or television reception, which can e determined
y turning the equipment off and on, the user is encouraged to try
to correct the interference y one or more of the following meas-
ures:
• Reorient or relocate the receiving antenna.
• Increase the separation etween the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
GUIDELINES LAID DOWN BY FCC RULES FOR USE OF
THIS UNIT IN THE U.S.A. (not applicable to other areas).
FCC WARNING
Changes or modifications not expressly approved y the party re-
sponsi le for compliance could void the user's authority to operate
the equipment.
Properly shielded ca les with ferrite core must e used for con-
nection to host computer and/or peripherals in order to meet FCC
emission limits.
THE SPECIAL VIDEO CABLE THAT COMES WITH THE CAMERA ----- THE CAMERA TO A VIDEO IN TERMINAL OF A COMPUTER
THE SPECIAL CONNECTION CABLE THAT COMES WITH QV-Link SOFTWARE ----- THE CAMERA TO A PROPER TERMINAL OF A COMPUTER

9
DEL
ON/OFF
Unpacking
Check to make sure that all of the items shown elow are included
with your camera. If something is missing, contact your dealer as
soon as possi le.
Soft case
Alkaline atteries (AA-size × 4)
Camera
Cleaning Cloth
Wrist Strap
Manual
Video ca le
Getting Acquainted
10
DEL
ON/OFF
DEL
MODE
DISP
EFFECT
PROTECT
ON/OFF
POWER
REC
PLAY
General Guide
The following illustrations show the names of each component, ut-
ton and switch on the camera.
Top and Display
/PROTECT
(Timer/Protect)
utton
DISP (Display) utton MODE utton
DEL (Delete) utton
Shutter utton
[+] (Forward)
utton
Function switch
POWER switch
Lens
EFFECT utton
LCD [–] (Reverse)
utton
Lens
Aperture switch
NORMAL/MACRO switch
11
DEL
MODE
DISP
EFFECT
PROTECT
Botto
Tripod hole
Battery compartment cover
BRIGHT ( rightness) control
• BRIGHT control adjusts the rightness of the image on the LCD.
The rightness is set at the factory to the optimum setting, and nor-
mally does not need adjustment.
Opening the Ter inal Panel Cover
11
11
122
22
233
33
3
Ter inals
Terminal panel cover
DIGITAL terminal
VIDEO OUT terminal
I portant!
Make sure that the terminal panel cover is slid fully away as shown in
step 2 a ove efore trying to raise it. Forcing the cover up can seri-
ously damage it.
General Guide
Battery
compartment
lock
AC Power terminal
DEL
DEL
MODE
DISP
EFFECT
PROTECT
Getting Acquainted
12
Connecting the Wrist Strap
Pass the wrist strap through the hole on
the side of the camera as shown in the
illustration.
Using the Cleaning Cloth
Use the cleaning cloth to wipe finger-
prints and smudges from the LCD and
lens.
• Be sure to avoid applying too much
pressure when wiping the LCD. Too
much pressure can cause permanent
discoloration, a normal images, and
cracks.
Using the Soft Case
Keep the camera in its soft case to pro-
tect it when not in use.
DEL
ON/OFF
MODE
DISP
POWER

13
Be sure to use Alkaline or Lithiu atteries. Never use
manganese atteries (see precautions on the next page).
• Make sure that the positive + and negative - ends of the
atteries are facing correctly.
• Press down on the attery compartment cover at the point
marked A in the a ove illustration until the cover locks into
place with a click.
Power Supply
The camera features a two-way power supply that lets you use either
atteries (AA-size Alkaline or Lithium) or household AC current.
To load batteries
Be sure that camera power is turned off whenever loading or replac-
ing atteries.
1. Slide the battery co part ent
lock on the botto of the ca era
in the direction indicated by arrow
11
11
1, and swing open the battery
co part ent cover as indicated
by arrow 22
22
2.
2. Insert four batteries and close the
battery co part ent cover.
2
1
A
Getting Acquainted
14
Battery Handling Precautions
Incorrect use or handling of atteries can cause them to leak or urst
and seriously damage your camera. Be sure to note the following
important precautions to avoid pro lems with atteries.
• Use only LR6 (AM-3) type alkaline or
FR6 type lithium dry cell atteries
with this camera. Never mix old at-
teries with new ones. Failure to do so
can result in ursting or leaking of
atteries, creating the danger of fire
or personal injury.
• Always make sure that the positive
[+] and negative [–] ends of the at-
teries are facing correctly, as noted
y the markings on the camera itself.
Improper loading of atteries can re-
sult in ursting or leaking of atteries,
creating the danger of personal injury
or soiling of o jects near y.
Caution
• Remove atteries from the camera if you do not plan to use it for
more than two weeks.
• Never recharge atteries, never allow direct connection etween
two ends of a attery, and never try to take atteries apart.
• Do not expose atteries to direct heat or dispose of them y urn-
ing. Doing so can create the danger of explosion.
• Never mix atteries of different types.
15
Power Supply
• Dead atteries are suscepti le to leakage, which can cause serious
damage to your camera. Remove atteries from the camera as
soon as you notice they are dead.
• The atteries that power this camera normally ecome warm when
they lose power. This does not indicate malfunction.
Standard Battery Life
The attery life reference values given elow indicate the amount of
time at standard temperature (25°C) until power automatically turns
off due to attery failure. They do not guarantee that atteries will
perform the amount of service indicated. Battery life is reduced y low
temperatures and continued use.
LR6(AM3) AA-size alkaline atteries
Approximately 130 minutes (Auto Play)
Approximately 500 images (continuous recording)
FR6 AA-size lithium atteries
Approximately 210 minutes (Auto Play)
Approximately 900 images (continuous recording)
Low Battery Indicator
The low attery indicator ( ) appears in the center of the LCD
whenever remaining attery power drops elow a certain level. It tells
you that power will soon turn off automatically if you continue using
the camera without replacing atteries. Be sure to replace all four
atteries with a fresh set of new ones.
Getting Acquainted
16
Flash Me ory
The camera features flash memory for storage of images. Flash
memory does not require electrical power to store data, so image
data is retained in memory even when you turn camera power off. If
atteries go dead, simply load a set of new atteries or connect the
AC adaptor and you will e a le to view images in camera memory.
Auto Power Off
Power automatically turns off whenever you do not perform any cam-
era operation for a period of time. Power turns off after a out one
minute in the Record Mode or after a out five minutes in the Play ack
Mode.
• To restore power, simply slide the POWER switch to the right as
you normally do.
I portant!
The Auto Power Off function does not operate under the following
conditions.
• During Auto Play (page 45)
• When operations are eing performed on a computer connected to
the camera via the camera’s DIGITAL terminal.
• Whenever the AC adaptor is connected to the camera.
ON/OFF
POWER

17
DEL
ON/OFF
Using AC Power
To power the camera from standard AC power, use the optional AC
adaptor (AD-C60).
AC Adaptor precautions
• Never use an electrical outlet whose
voltage is outside the rating marked
on the camera. Doing so can create
the danger of fire or electrical shock.
Use only the optional AC adaptor
specified for this camera.
• Should the cord of the AC adaptor
ecome damaged (exposed internal
wiring or shorts), request a replace-
ment from an authorized CASIO
service provider. A damaged AC
adaptor cord creates the danger of
fire or electrical shock.
Caution
Power Supply
AC outlet
AC power terminal
AC adaptor
Getting Acquainted
18
• Always e sure to use the AD-C60
AC adaptor only. Using any other AC
adaptor can cause damage to the
camera not covered y the warranty.
• When unplugging the AC adaptor
from the wall socket, e sure to
grasp the adaptor (not the cord).
• Avoid an undue ending, pulling,
and twisting of the AC adaptor's
cord, and never try to lengthen the
cord y splicing it with other wire.
• Be sure to switch power off efore connecting or disconnecting the
adaptor.
• Always turn camera power off efore disconnecting the AC adaptor,
even if the camera has atteries installed. If you don't, the camera
will turn off automatically when you disconnect the AC adaptor.
Even so, you run the risk of damaging the camera whenever you
disconnect the AC adaptor without first turning power off.
• The AC adaptor may ecome warm to the touch after extended pe-
riods of use. This is normal and is not cause for alarm.
• After use turn off the power switch of the camera and unplug adap-
tor from the AC outlet.
Caution
19
Recording Images
REC
PLAY
Recording I ages
The following procedure provides the asic steps for recording an
image.
To record an i age
1. Enter the Record Mode.
• Slide the function switch to the
REC position.
2. Turn on the ca era.
• Slide the POWER switch in the di-
rection indicated y the arrow.
• The POWER switch automatically
slides ack to its original position
when you release it.
• When power comes on, the image of the o ject that is in
front of the camera’s lens appears on the LCD.
• You can perform steps 1 and 2 in either order (1 then 2, or 2
then 1).
3. Set the NORMAL/MACRO switch to (NORMAL)
position.
• If the o ject whose image you are
recording is a out 13 centimeters
from the lens (a out 5 inches), set
the NORMAL/MACRO switch to
(MACRO). See page 24 for
details on using this switch.
Note
• The camera is designed to refresh the image on the LCD a out
seven times per second. Because of this, you may experience a
feeling of jerkiness in the changing image if you move the camera
quickly. This is normal and does not indicate malfunction.
ON/OFF
POWER
Operation
20
4. Use MODE to enter the resolution ode (FINE or NORMAL)
you want.
• Each press of MODE toggles etween the Normal Mode
and Fine Mode.
• Note that the num er of images that can e stored in
memory is different depending on whether images are
saved in the Normal Mode or Fine Mode. See “Resolution
Modes” on page 24 for details.
5. Record the i age.
• Compose the image you want to
record while viewing it on the
LCD.
• It is est to look at the LCD di-
rectly, and not from an angle.
• Take care that your finger is not
locking the lens.
• Should the lens ecome dirty, use
the cloth that comes with the cam-
era to clean it off.
• When the image is situated on the LCD as you want it, press
the shutter utton.
• Press the shutter utton lightly to avoid moving the camera.
See page 21 for information on how to avoid hand move-
ment.
• The message “WAIT” appears on the LCD for a out six sec-
onds along with the image that was recorded when you
pressed the shutter utton. You can use the camera to take
the next picture after the “WAIT” message disappears.
• Here you could change the function switch to the PLAY posi-
tion and view the image you just recorded.

21
Recording Images
Caution
• Never open the attery compartment cover, disconnect the
AC adaptor from the camera or unplug it from the wall
socket while the “WAIT” message is on the LCD. Doing so
will not only make storage of the current image impossi le, it
can also corrupt other image data already stored in camera
memory.
How to avoid hand ove ent…
Any hand movement when you press the shutter utton can causes
lurring of the recorded image. Note the following points on avoiding
hand movement.
• Make sure there is no excessive movement of the image of the o -
ject on the LCD.
• Use a tripod whenever possi le when recording images in dim light-
ing. The camera automatically adjusts shutter speed in accordance
with the rightness of the o ject whose image is eing recorded.
Shutter speed is quite slow for dimly lit o jects, increasing the pos-
si ility of lurring caused y hand movement.
Fluorescent Lighting
Fluorescent lighting actually flickers at a frequency that cannot e
detected y the human eye. When using the camera indoors under
such lighting, you may experience some rightness or color pro lems
with recorded images. The actual extent of the pro lems depends on
what cycle of the fluorescent light’s flicker is occurring when the cam-
era’s shutter actually releases. For est results, use a commercially
availa le video lights.
Operation
22
Infrared Light
Infrared light generated y a flash or other source can create image
color pro lems, such as red areas eing recorded as green. Such
color pro lems will show up in the LCD while you are composing the
image.
Shooting I ages Outdoors
Strong direct or reflected sunlight can cause recorded images to take
on a greenish tinge. This is due to the characteristics of the camera’s
charge-coupled device (CCD), and it does not indicate malfunction of
the camera. One way you can try to minimize this pro lem is to set
the aperture to [●] (F8).
Changing the Lens Orientation
The lens of the camera is uilt into a lens ody that is designed to
rotate. This means you can change the angle of the lens without mov-
ing the rest of the camera.
Rotates up to 90 °
towards the front Rotates up to 180
°
towards the ack
23
Recording Images
DEL
MODE
DISP
EFFECT
PROTECT
ON/OFF
POWER
REC
PLAY
• Any images recorded while the lens ody is rotated so the lens is
pointed from the ack of the camera are stored as mirror images of
the image that appears in the LCD efore the shutter utton is
pressed.
AA
AA
A
BB
BB
B
I portant!
• Do not apply excessive force when rotating the lens ody. Doing so
can cause serious damage to the lens.
• Do not carry the camera or move it around while holding onto only
the lens ody.
• Return the lens ody to its normal position (with the lens pointing
from the front of the camera) efore storing the camera.
AA
AA
ALCD when shutter button is
pressed (in the Record Mode)
BB
BB
BLCD when i age is played
back fro ca era e ory
.......
.......
Operation
24
NORMAL/MACRO Switch
The NORMAL/MACRO switch tells the camera
how much distance there will e etween the
lens and the o ject whose image you are record-
ing. The following ta le descri es the conditions
covered y each switch setting.
Switch position
Aperture F2 (○)
F8 (●)
(MACRO)
12 to 14 cm
(4.7” ~ 5.5”)
For close ups taken
indoors
9 to 23 cm
(3.5” ~ 9”)
For outdoor close-ups
(NORMAL)
0.6 meters to ∞
(2’ ~ ∞)
For portraits taken
indoors
0.24 meters to ∞
(9.4” ~ ∞)
For general outdoor
images
* See page 26 for details on how to change the aperture.
Resolution Modes
In addition to a Normal Mode, this camera also has a Fine Mode for
saving images using higher resolution. Use the MODE utton to
switch etween the Normal Mode and Fine Mode.
The following ta le shows how many images can e stored in
memory using each resolution mode.
Resolution
Mode
FINE
NORMAL
Indicator Num er of Images
64 (approximately 480-k it com-
pressed)
192 (approximately 160-k it com-
pressed)
• You can switch etween resolution modes at any time efore re-
cording an image.

25
Recording Images
Exposure Adjust ent
This camera features an automatic exposure (AE) function that auto-
matically changes the shutter speed in accordance with lighting. In
addition, you can also manually adjust the exposure to compensate
for acklighting, indirect indoor lighting, dark ackgrounds, and other
special conditions.
To anually adjust the exposure
1. Enter the Record Mode.
• Set the function switch to the REC position.
2. Use the [+] and [–] buttons to anually adjust the exposure.
• Pressing [+] makes the image on the LCD righter. Use it to
adjust for dim indoor lighting and acklighting.
• Pressing [–] makes the image on the LCD darker. Use it to
adjust for right sunlight.
3. After adjusting the exposure, press the shutter button to
record the i age.
【−】
【＋】
+ –
+ –
Operation
26
Notes
• Exposure adjustment is generally expressed in terms of an expo-
sure adjustment value. The exposure adjustment value is always
set to zero whenever you turn on the camera.
• The exposure adjustment value is changed y 0.25 with each press
of [+] or [–]. The range of the value is -2 to +2.
• The exposure adjustment value automatically reverts to zero when-
ever the shutter utton is pressed. You can manually reset the ex-
posure adjustment value y using [+] and [–] to change the value
ack to zero, which is indicated when the +/– indicator disappears
from the monitor.
I portant!
• When the exposure adjustment is too right or too dark, you may
not e a le to adjust within the range of -2EV to +2EV.
Changing the Aperture Setting
There are two aperture settings you can use to match lighting condi-
tions. Use the aperture switch to change the aperture setting.
• Use the [●] (F8) setting to decrease expo-
sure. This setting works est outdoors.
• Use the [○] (F2) setting to increase expo-
sure. This setting works est indoor and
with ack lit images.
Note
• Also see page 28 for information a out exposure warning indica-
tors.
27
Recording Images
Record Mode Displays
The following provides details on the images, indicators and mes-
sages that appear on the LCD in the Record Mode.
I age Display
An image of the o ject that is picked up y the camera’s lens appears
on the LCD. The camera is designed to refresh the image on the LCD
a out seven times per second. Because of this, you may experience
a feeling of jerkiness in the changing image if you move the camera
quickly. This is normal and does not indicate malfunction.
Note
• The LCD image that appears in the Play ack Mode is more detailed
than the image produced in the Record Mode. Because of this, you
should consider the Record Mode image to e a reasona le fac-
simile of the image that is actually stored in memory.
Re aining Pages/Resolution Mode Indicator
Pressing DISP in the Record Mode displays a value that shows how
many memory pages are availa le for recording images, along with
the current resolution mode setting (FINE or NORMAL).
1. Enter the Record Mode.
• Set the function switch to the REC position.
Operation
28
2. Press the DISP button.
• Press DISP again to clear the
num er of remaining pages
and the resolution mode indica-
tor from the monitor screen.
Note
• The display/non-display status of the num er of remaining pages
and the resolution mode indicator is linked to the page status
indicators(page 33) and the zoom indicator(page 36).
Exposure Warning Indicators
Exposure warning indicators appear on the LCD whenever the light
eing picked up y the lens would result in under exposure or over
exposure of an image.
○......Under exposure
● ......Over exposure
Use the procedure descri ed on page 26 to change the aperture or
change the lighting of the image so the indicator disappears from the
LCD.
I portant!
• The exposure warning indicators also appear when lighting is out-
side the range of the camera. In such a case, changing the aperture
will not clear the indicator from the LCD.
• The manual exposure adjustment procedure (page 25) cannot e
used when an exposure warning indicator is on the LCD. Clear the
warning indicator y changing the aperture switch setting.
remaining pages
resolution mode

29
Recording Images
• Pressing the [+] or [–] utton to adjust exposure while an exposure
warning indicator is on the LCD causes a +/– exposure value to
appear. This is an EV value.
Low Battery Indicator
The low attery indicator ( ) appears in the center of the LCD
whenever remaining attery power drops elow a certain level. It tells
you that power will soon turn off automatically if you continue using
the camera without replacing atteries. Be sure to replace all four
atteries with a fresh set of new ones.
Note that the camera is designed to automatically turn off power ear-
lier when a personal computer or other equipment is connected to the
camera’s DIGITAL terminal for data communications, in order to pro-
tect against pro lems due to data corruption. Because of this, it is
recommended that your use the camera’s optional AC adaptor
whenever performing data communications.
• See page 13 for details on how to replace atteries.
Me ory Full Message
If you are recording images in the Fine Mode and there is not enough
memory for further Fine Mode recording, the message “REMAIN”
appears on the monitor screen along with a value that shows how
many images can still e recorded in the Normal Mode. You can
press MODE at this time to change to the Normal Mode and record
more image if you want.
The message “MEMORY FULL” means that there is not enough
memory for further Normal Mode or Fine Mode recording. Note that
the filter and title functions also cannot e used while memory is full.
In this case, you have to use the following procedures make room in
memory for further recording.
• Delete some images from memory (page 53)
• Change the resolution of some of the stored images from FINE to
NORMAL (page 57)
Operation
30
Using the Self-Ti er
With the Self-Timer, the shutter is released 10 seconds after you
press the /PROTECT utton.
1. Enter the Record Mode.
• Set the function switch to the REC position.
2. Start the Self-Ti er operation.
• Place the camera securely on a tripod, desk or other sta le
surface, with the image to e recorded in the LCD.
• After composing the image, press the /PROTECT ut-
ton.
• A 10-second countdown starts on the LCD. The shutter will
release automatically when the end of the countdown is
reached.
• To cancel on ongoing Self-Timer operation, press the /
PROTECT utton or shutter utton.
Note
• If you use the Self-Timer with the lens ody rotate 180° (page 22),
you can view the countdown on the LCD while waiting for the shut-
ter to release.
I portant!
• If attery power is low, camera power may turn off while a count-
down is in progress. If this happens, replace the atteries with new
ones.
31
Playing Back Images
Playing Back I ages
This section descri es how to recall and view images stored in cam-
era memory.
Displaying I ages on the Ca era’s LCD
Camera memory is divided into “pages”, and each image is assigned
to page that is num ered sequentially from 1 through 192 (NORMAL
resolution images). Note that all 192 pages are availa le only if all
images are recorded using the NORMAL Mode (page 24).
The following procedure descri es how to display images on the
camera’s uilt-in LCD.
1. Enter the Playback Mode and turn on the ca era.
• Slide the function switch to the
PLAY position.
• When power comes on, the page
that was displayed when you last
turned power off appears on the
LCD.
2. Scroll through the e ory pages until the i age you want
to view is displayed.
• Press [+] to display the next memory page or [–] to display
the previous memory page.
• To jump to the first (lowest num ered) image in memory,
press the shutter utton and [–] utton at the same time.
• Holding down [+] or [–] for a out two seconds starts high-
speed scrolling of images.
【＋】【＋】
【−】【−】
REC
PLAY
Operation
32
DEL
ON/OFF
INPUT
VIDEO LR
AUDIO
Notes
• If you set the function switch to PLAY after recording an image, that
image appears on the LCD first.
• The message “MEMORY EMPTY” appears on the LCD if there are
no images stored in memory when you enter the Play ack Mode.
Displaying I ages on a TV Screen
Use the special video ca le that comes with the camera to connect it
to a television as illustrated elow, and you can then view the images
stored in camera memory on the TV’s screen.
I portant!
• The camera can e connected only to a TV that is equipped with a
VIDEO IN terminal.
• Make sure that the power of oth the camera and the TV are turned
off when making connections.
• The signal output through this camera's VIDEO OUT terminal is an
NTSC signal. An image output through this terminal will not look
normal if the camera is connected to a PAL or other type of TV or
video deck.
• Leaving the same image displayed on a TV or computer CRT
screen for very long periods can cause that image to “ urn in”, leav-
ing a ghost of the image even after the original image is cleared. Be
sure not to leave an image on a TV or CRT screen for long periods.
After connecting the camera and TV, set the channel of the TV to the
channel used for video input.
TV Accessory video ca le
VIDEO IN terminal
VIDEO OUT
terminal

33
Playing Back Images
After connecting the camera and TV, use the same procedures as
those descri ed under “Displaying Images on the Camera’s LCD” on
page 31.
I portant!
• Note that only images already stored in camera memory can e
viewed on the TV screen. If you change to the camera’s Record
Mode, the image picked up y the camera’s lens will not appear on
the TV screen.
Page Status Indicators
Pressing DISP in the Play ack Mode causes page status indicators
to appear on the monitor display indicating page num er, protect sta-
tus, and resolution mode.
1. Enter the Playback Mode.
• Set the function switch to the PLAY position.
2. Press the DISP button.
• The page num er and resolution
mode are shown at the top of the
screen. If the page is protected
(page 48), a protect indicator ( )
is shown in the upper left corner.
• Press DISP again to clear the
page status indicators from the
screen.
Note
• The display/non-display status of the page status indicators is
linked to the remaining pages and resolution mode indicator (page
27) and to the zoom area indicator (page 36).
resolution mode
page num er
Operation
34
Producing a Multi-Page Display
Four or nine memory pages can e displayed at the same time. This
feature can e used to display multiple memory pages on the cam-
era's uilt-in LCD, or on the screen of a connected TV.
Multi-Page Display (EFFECT Menu)
1. Enter the Playback Mode.
• Slide the function switch to the PLAY position.
2. Display the EFFECT Menu.
• Press the EFFECT utton to dis-
play the EFFECT Menu.
• At this time either a 4-page or a 9-
page display format appears.
• To clear the selection screen and
quit this procedure, press the
EFFECT utton again.
• Note that you cannot use the multi-page display while
protected memory pages are hidden (page 52).
3. Specify the screen size.
• Use the [+] and [–] uttons to specify the screen size.
4. Press the shutter button.
35
Playing Back Images
12
34
56
78
910
11
【＋】 【＋】
【−】 【−】
5. Scroll through the i ages.
• Use the [+] and [–] uttons to scroll images forward and
ack. Each press shows a new screen of four or nine new
images.
Unused pages are colored gray.
• To clear the multi-page display and return to the normal sin-
gle-page display, press any utton esides [+] or [–].
Selecting a Me ory Page in a Multi-Page Display
You can use the following procedure to select one of the memory
pages in a multi-page display. Then when you return to the 1-page
display, the memory page you selected will e the one displayed. The
following procedure uses the 4-page display as an example, ut you
can use the same procedure with the 9-page display.
1. While a ulti-page display (either 4-page or 9-page) is on
the screen, press the DISP button.
• This causes the image in the up-
per left to e surrounded y a
frame.
In this example, we will select this page.
Operation
36
2. Move the fra e to the i age you want to select.
• Use the [+] and [–] uttons to move the frame around the
screen.
3. Press the shutter button.
• The selected image (the one with
the frame around it) appears on a
single-page display.
Using the Zoo Function
This function lets you select a specific part of a stored image and
enlarge it to twice its normal size.
1. Enter the Playback Mode.
• Slide the function switch to the PLAY position.
2. Display the EFFECT Menu.
• Press the EFFECT utton to dis-
play the EFFECT Menu.
• To clear the selection screen and
quit this procedure, press the
EFFECT utton again.
3. Use [+] and [–] to select “ZOOM”.

37
Playing Back Images
4. Press the shutter button.
• At this time the image is dou led in size. The portion that
appears on the screen is the center of the image.
5. Scroll the i age on the screen.
• Use [+] and [–] to scroll as shown in the illustration elow.
6. To clear the zoo ed display and return to the nor al size
display, press any button besides [+], [–], or DISP.
Changing the Location of the Zoo Area
• Pressing [–] moves the zoom area in the opposite direction.
【＋】 【＋】 【＋】

【＋】 【＋】 【＋】

【＋】 【＋】 【＋】

Operation
38
Notes
• If the page num er is displayed in the upper right corner of the
screen when you perform a zoom operation, the num er is replaced
y a zoom area indicator ( ). This indicator shows you what part
of the image is currently enlarged on the display. You can turn the
zoom area indicator on and off y pressing the DISP utton.
• Note that turning display of the zoom area indicator on and off dur-
ing a zoom operation also affects the display of the image num er
in the Record Mode (page 27), and the memory page num er in the
Play ack Mode (page 33).
Superi posing a Title on an I age
With this camera you can record a title and then superimpose the
title onto another image. Note that you have to prepare a paper
copy of your title efore performing the following procedure.
To record the title
1. Enter the Record Mode.
• Slide the function switch to the REC position.
2. Press the EFFECT button.
• You can also use the [+] and [–]
uttons to adjust the exposure at
this point. See page 25 for infor-
mation a out exposure adjust-
ment.
39
Playing Back Images
3. Align the ca era’s fra e with the title and then press the
shutter button.
• The message “WAIT” appears for
a few moments after you press
the shutter utton to indicate that
the title is eing recorded.
• You can use the [+] and [–]
uttons to adjust the rightness of
the title within a range of ±30.
4. Press the shutter button again to store the title using the
brightness setting you selected in step 3.
Note
The title can e inserted in the area defined y the outer line of the
frame.
To superi pose a title on an i age
1. Enter the Playback Mode.
• Slide the Function switch to the PLAY position.
2. Use the [+] and [–] buttons to scroll through the i ages in
e ory until the one you want to superi pose a title onto
is on the onitor screen.
3. Press EFFECT to display the EFFECT Menu.
• If you want to clear the EFFECT
Menu without proceeding any
further, press EFFECT again.
Operation
40
4. Use the [+] and [–] buttons to select the “TITLE” ite .
5. Press the shutter button.
6. Use the [+] and [–] buttons to select the color of the title.
• Each press of [+] changes the selected color in the following
sequence: Black Aqua Yellow Pink Blue
Green Red Orange Purple White White-on-
Black White-on-Aqua ······and so on···Pressing [–]
changes colors in reverse sequence.
7. Press the shutter button to register the selected color.
8. Use the [+] and [–] buttons to select a fra e for the title.
• Each press of [+] changes the selected frame in the follow-
ing sequence: PLATE1 PLATE2 PLATE3 PLATE4
No Frame. Pressing [–] changes frames in reverse se-
quence.

41
Playing Back Images
9. Press the shutter button to register the selected fra e.
• If you selected “No Frame” in step
8, skip to step 12 here. Otherwise,
proceed with step 10.
10 .Use the [+] and [–] buttons to select the color of the fra e.
• Each press of [+] changes the selected color in the following
sequence: Yellow Pink White. Pressing [–] changes
colors in reverse sequence.
11 .Press the shutter button to register the selected color.
12 .Use the [+] and [–] buttons to specify the location of the
title.
• Each press of [+] changes the location the title in the
following sequence: Bottom Middle Top. Pressing [–]
changes the position in reverse sequence.
13 .Press the shutter button to register the selected position.
• The image with the superimposed title is stored in the
memory page immediately following the memory page
where the original image is stored. All images in the
following memory pages are shifted to make room.
Operation
42
Rotating an I age
Use the following procedure to rotate an image in 90° increments.
To rotate an i age
1. Enter the Playback Mode.
• Slide the function switch to the PLAY position.
2. Use the [+] and [–] buttons to scroll through the i ages in
e ory until the one you want to rotate is on the onitor
screen.
3. Press EFFECT to display the EFFECT Menu.
• If you want to clear the EFFECT
Menu without proceeding any
further, press EFFECT again.
4. Use the [+] and [–] buttons to select the “ROTATE” ite .
43
Playing Back Images
5. Press the shutter button.
6. Use the [+] and [–] buttons to select the rotation angle.
• If you selected a rotation angle of 0° or 180°, skip to step 8
here. Otherwise, proceed with step 7.
7. Use the EFFECT button to select the background color.
• Each press of EFFECT changes
the selected color in the following
sequence: White Aqua
Yellow Pink Blue Green
Red Orange Purple
Black.
8. Press the shutter button to co plete the rotation opera-
tion.
I portant!
• The rotation operation affects the displayed image only. It does not
actually change the data stored in camera memory. Because of this
the image retains its normal, non-rotated orientation when you print
it or transfer it to a personal computer.
Operation
44
Filtering an I age
Images can e filtered to produce a variety of special effects.
To filter an i age
1. Enter the Playback Mode.
• Slide the function switch to the PLAY position.
2. Use the [+] and [–] buttons to scroll through the i ages in
e ory until the one you want to filter is on the onitor
screen.
3. Press EFFECT to display the EFFECT Menu.
• If you want to clear the EFFECT
Menu without proceeding any
further, press EFFECT again.
4. Use the [+] and [–] buttons to select the “FILTER” ite .
5. Press the shutter button.

45
Playing Back Images
6. Use the [+] and [–] buttons to select the filter type.
• Each press of [+] and [–] changes to one of the five availa le
filters.
7. Press the shutter button to register the currently selected
filter.
• The filtered image is stored in the memory page immediately
following the memory page where the original, unfiltered
image is stored. All images in the following memory pages
are shifted to make room.
• The amount of time the camera needs to filter an image de-
pends on the image's composition and coloring.
Using Auto Play
Auto play lets you automatically scroll through the camera’s memory
pages quickly and easily. You can specify the speed of the scroll.
I portant!
• The camera’s Auto Power Off function (page 16) does not function
while an auto play operation is in progress. If you forget to turn the
camera off, there is the danger that auto play will continue until at-
teries are dead. To avoid this, make sure that you stop the auto play
operation and turn the camera off when you finish viewing.
To start the auto play operation
1. Enter the Playback Mode and turn on the ca era.
2. Start the auto play operation.
• Hold down the [+] and [–] uttons until the message “AUTO
PLAY START” appears.
Operation
46
• Auto play continues to loop through the memory pages. This
means that when it reaches the last page, it starts again
from the first page.
3. Press the shutter button to stop the auto play operation.
• Pressing any utton except the MODE utton stops the auto
play operation.
• Note that the uttons of the camera do not operate while a
page change operation is in progress. Make sure that an
image is shown on the display when you press a utton to
stop the auto play operation.
To set auto play speed
Use the following procedure to specify how long each image remains
on the display, within the range of 1 to 30 seconds.
1. Perfor steps 1 and 2 under “To start the auto play opera-
tion” on page 45 to start auto play.
1 second 1 second
47
Playing Back Images
2. Press MODE to enter the Auto Play Setting Mode.
• Be sure to press MODE while an image is stopped on the
monitor, and not while images are changing.
3. Use [+] (increase) and [–] (decrease) to change the current
speed setting.
• You can set the speed within a range of 1 to 30 seconds, in
one-second increments.
4. To start auto play using your newly set speed setting,
press the shutter button.
• To exit the auto play setting mode at any time, change the
function switch position to REC and then ack to PLAY, or
turn power off. Either of these methods cancels any settings
you made and returns to the settings in effect when you en-
tered the Auto Play Setting Mode.
• You can use auto play in com ination with the multi-page
display (page 34). First change to the multi-page format, and
then perform the auto play operation (page 45).
• You cannot use auto play in com ination with the multi-page
display while protected pages are hidden (page 52).
Speed (num er of
seconds each
image is displayed)
Operation
48
Protecting Me ory Pages
You can protect specific memory pages to ensure that they are not
accidently deleted.
• Note that you cannot protect or unprotect memory pages when pro-
tected memory pages are hidden (page 52).
To protect a single e ory page
1. Enter the Playback Mode.
• Slide the function switch to the PLAY position.
2. Display the PROTECT Menu.
• Press the /PROTECT utton
to display the PROTECT Menu.
• This menu lets you specify either
single-page protection or all-page
protection.
3. Select “PAGE”.
• Use [+] and [–] to select “PAGE”.
• To clear the selection screen and quit this procedure, select
the EXIT icon.
4. Press the shutter button.

49
Playing Back Images
5. Display the page you want to protect.
• Use [+] and [–] to scroll through the pages until the one you
want to protect is displayed.
6. Press the shutter button to protect the displayed i age.
• A protect indicator ( ) appears in the upper left corner of
the display to indicate it is protected.
7. To protect so e ore i ages, repeat steps 5 and 6 above.
• To clear the page protect screen, press any utton esides
[+], [–], or the shutter utton. The page protect screen is also
cleared automatically if you do not perform any utton op-
eration for a out 20 seconds.
To protect all pages in e ory
1. Select the Playback Mode and turn on power.
• Slide the function switch to the PLAY position.
2. Display the PROTECT Menu.
• Press the /PROTECT utton
to display the PROTECT Menu.
• This menu lets you specify either
single-page protection or all-page
protection.
3. Select “ALL”.
• Use [+] and [–] to select “ALL” and then press the shutter
utton.
• When you select “ALL”, the message “PROTECT ALL?” ap-
pears on the screen.
Operation
50
4. Specify all-page protection.
• Use [+] and [–] to select “ALL” and
then press the shutter utton.
• A protect indicator ( ) appears
in the upper left corner of all
memory pages when you display
the page status indicators.
Unprotecting Me ory Pages
You can unprotect specific memory pages or all pages currently
stored in memory.
To unprotect a single e ory page
1. In the Playback Mode, display the PROTECT Menu.
• Press the /PROTECT utton to display the PROTECT
Menu.
• This menu lets you specify either a single page or all pages.
2. Select “PAGE”.
• Use [+] and [–] to select “PAGE”.
• To clear the selection screen and quit this procedure, select
the EXIT icon.
3. Press the shutter button.
• This causes the “PROTECT PAGE” menu to appear.
4. Display the page you want to unprotect.
• Use [+] and [–] to scroll through the pages until the one you
want to unprotect is displayed.
51
Playing Back Images
5. Press the shutter button to unprotect the displayed i age.
• The protect indicator disappears from the upper left corner
of the display to indicate the image is no longer protected.
6. To unprotect so e ore i ages, repeat steps 4 and 5
above.
• To clear the page protect screen, press any utton esides
[+], [–], or the shutter utton. The page protect screen is also
cleared automatically if you do not perform any utton op-
eration for a out 20 seconds.
To unprotect all pages in e ory
1. In the Playback Mode, display the PROTECT Menu.
• Press the /PROTECT utton to display the PROTECT
Menu.
• This menu lets you specify either a single page or all pages.
2. Select “ALL”.
• Use [+] and [–] to select “ALL” and then select the shutter
utton.
• When you select “ALL”, the message “PROTECT ALL?” ap-
pears on the screen.
3. Specify all-page unprotection.
• Use [+] and [–] to select “CANCEL” and then press the shut-
ter utton.
• The protect indicator will not appear in the upper left corner
of any of the memory pages when you display the page sta-
tus indicators.
Operation
52
Hiding Protected Me ory Pages
This function makes it possi le for you to hide protected memory
pages so their images do not appear on the monitor during play ack.
To hide protected e ory pages
While holding down the [+] utton, turn on the camera.
I portant!
• You cannot protect or unprotect pages (pages 48~51) while pro-
tected pages are hidden.
• You cannot display multiple images (page 34) while protected
pages are hidden.
• The message “ALL DATA IS PROTECTED!” appears on the moni-
tor when you hide protected memory pages and all pages currently
in memory are protected. It also appears if you delete all unpro-
tected memory pages while protected memory pages are hidden.
To unhide protected e ory pages
While holding down the [–] utton, turn on the camera.

53
Deleting Memory Pages
Deleting Me ory Pages
Use the procedures descri ed in this section to delete memory
pages. You can delete individual pages, or all the pages currently
stored in memory.
Warning!
The delete operation cannot e undone!
Before performing any of the procedures descri ed in this section,
make sure that you really do not need the images recorded on the
memory pages you are deleting. Be especially careful when you are
using the all delete operation.
Deleting I ages Fro Me ory
• Note that you cannot delete images if they are protected. See page
50 for details on how to unprotect images.
• You cannot delete images from a multi-page display, a display of an
enlarged image, or while Auto Play ack is operating.
To delete a single i age
1. Select the Playback Mode and turn on power.
• Slide the function switch to the PLAY position.
• Slide the POWER switch in the direction indicated y the
arrow.
2. Display the DELETE Menu.
• Press the DEL utton to display
the DELETE Menu.
54
Operation
3. Select “PAGE”.
• Use [+] and [–] to select “PAGE”.
• To clear the selection screen and quit this procedure, select
the EXIT icon.
4. Press the shutter button.
5. Use [+] and [–] to display the i age you want to delete.
• Any images that are protected
(page 48) do not appear on the
screen during this operation.
6. Double check to ake sure that you really want to delete
the i age that is on the screen.
• To a ort the delete operation without deleting anything,
press any utton other than [+], [–], or the shutter utton.
7. Press the shutter button to delete the page.
• After you delete an image, the image on the next page ap-
pears on the screen.
8. To delete ore i ages, repeat steps 5 through 7.
• After you finish deleting all the images you want, press any
utton other than [+], [–], or the shutter utton to clear the
image delete screen.
55
Deleting Memory Pages
Note
• Deleting a page causes the remaining pages to e renum ered.
Blank pages are not left inserted etween non- lank pages.
123 4
123
56
Operation
To delete all i ages in e ory
1. Enter the Playback Mode.
• Slide the function switch to the PLAY position.
2. Display the DELETE Menu.
• Press the DEL utton to display
the DELETE Menu.
3. Select “ALL”.
• Use [+] and [–] to select “ALL” and press the shutter utton.
4. Select “ALL”.
• Use [+] and [–] to select “ALL”.
• To clear the selection screen and
quit this procedure, select the
EXIT icon.
5. Press the shutter button to delete all i ages fro e ory.
• After all images are deleted, the message “MEMORY
EMPTY” appears on the screen.
• If you perform the a ove operation while protected images
are hidden, the message “ALL DATA IS PROTECTED!” ap-
pears on the screen.

57
Deleting Memory Pages
Use the following procedure to convert an image converted in the
FINE Mode to a NORMAL Mode image.
• After you convert a FINE image to a NORMAL image, the FINE
image is automatically deleted.
1. Select the Playback Mode and turn on power.
• Slide the function switch to the PLAY position.
• Slide the POWER switch in the direction indicated y the
arrow.
2. Display the FINE NORMAL Menu.
• Press the MODE utton to display
the FINE NORMAL Menu.
3. Display the i age you want to convert.
• Use [+] and [–] to scroll through the images.
• Any images that are protected (page 48) do not appear on
the screen during this operation.
4. Press the shutter button to start the conversion.
5. After the conversion is co plete, you can repeat steps 3
and 4 to convert ore i ages.
• After you are finished converting images, press any utton
esides [+], [–], or the shutter utton to clear the conversion
screen.
Resolution Conversion Using the Camera with a Connected Device
58
DEL
ON/OFF
DEL
ON/OFF
VIDEOLR
INPUT
AUDIO
DEL
ON/OFF
The ca era ter inals
The following descri es which the camera terminal you should use
for each type of connection.
VIDEO OUT – Use this terminal when connecting to the VIDEO IN
terminal of a TV, video tape deck, video printer, or
other similar devices. Use the special video ca le
that comes with the camera for such connections.
Connecting to Other Devices
* The type of connecting ca le you should use depends on the type
and shape of the terminals equipped on the digital camera you are
connecting to. See pages 59 through 65 for details.
DIGITAL terminal*
VIDEO OUT
terminal
DIGITAL – Use this terminal to connect to a personal computer (re-
quires optional Connection Kit), another CASIO Digital
Camera, or a QV Color Printer. The illustration elow
shows how to connect to another digital camera.
DIGITAL terminal
VIDEO IN
terminal of other
device
Special video
ca le that
comes with
camera
Connecting
ca le*
59
Using the Camera with a Connected Device
Using the Ca era with a Connected Device
The following section provides specific information on how you can
use the camera after connecting to various types of devices. In each
case, the camera terminal you should connect to is indicated in the
title as
VIDEO
and
DIGITAL
.
I portant!
• Make sure that the power of all devices is turned off efore connect-
ing them.
• You should also check the owner’s manuals of the device you are
connecting to the camera for precautions and other information.
Television
VIDEO
• See page 32 of this manual for details a out connecting to a televi-
sion and displaying images from camera memory on a TV screen.
Video Tape Deck
VIDEO
You can use the video tape deck to record images from the camera.
To record ca era i ages on video tape
1. Use the special video ca le that comes with the camera to connect
to the VIDEO IN terminal of the video tape deck.
2.Set up the video tape deck to record images input through its
VIDEO IN terminal.
• Consult the owner’s guide that comes with the tape deck for details
a out how to set up for recording.
3. Enter the camera Play ack Mode and start the video deck record
operation.
• It is pro a ly est to use auto play when recording camera images
to video tape, ecause it changes pages automatically at a preset
speed.
Using the Camera with a Connected Device
60
• Remaining pages (page 27) are also recorded on the video tape if
they are turned on. Be sure to turn off display of remaining pages if
you do not want them in the taped images.
• If the low attery indicator (page 29) is displayed while you are re-
cording to video tape, it will also e recorded with the image. If this
happens, either replace atteries or use the AC adaptor.
Video Printer
VIDEO
You can use Video Printer to print copies of images in camera
memory.
To print ca era i ages on a Video Printer
1. Use the special video ca le that comes with the camera to connect
to the VIDEO IN terminal of the video printer.
2. Set up the video printer to print images input through its VIDEO IN
terminal.
• Consult the owner’s guide that comes with the video printer for de-
tails a out how to set up for printing.
3. Enter the camera Play ack Mode and display the image you want
to print.
4. Start the video printer’s print operation.
• Remaining pages (page 27) are also included on the print if they are
turned on. Be sure to turn off display of remaining pages if you do
not want them in the print.
• If the low attery indicator (page 29) is displayed while you are print-
ing, it will also e printed with the image. If this happens, either re-
place atteries or use the AC adaptor.

61
Using the Camera with a Connected Device
Connecting to another CASIO Digital Ca era
DIGITAL
You can connect the camera to another CASIO digital camera and
exchange image data etween them. Connect the DIGITAL terminals
of the two cameras using the optionally availa le SB-62 connecting
ca le.
To connect the two ca eras
1. Turn oth cameras off.
2. Connect the two cameras y plugging the optional SB-62 connec-
tion ca le into their DIGITAL terminals.
3. Turn oth cameras on.
To send data fro this ca era to another ca era
1. Set the function switches of oth cameras to PLAY.
2.Use the [+] and [–] uttons of this camera to find the image you
want to send.
• You cannot send images etween two cameras while either of their
function switches is set to REC.
• You cannot send images while using the multi-page display or
zoom function.
3. Press the shutter utton of this camera.
Return to previous display
Receive icon
Send icon
Using the Camera with a Connected Device
62
4. Use the [+] and [–] uttons to move the pointer to the send icon.
5.After you make the setting you want, press the shutter utton
again.
• Pressing the shutter utton sends the selected image to the other
camera.
• You can send only one image at a time. To send more images,
repeat steps 2 through 5.
To receive data to this ca era fro another ca era
1. Set the function switches of oth cameras to PLAY.
2. Use the [+] and [–] uttons of other camera to find the image you
want to receive.
• You cannot receive images etween two cameras while either of
their function switches is set to REC.
• You cannot receive multi-page display or zoomed images.
• If you try to receive a multi-page display or zoomed images, other
camera’s monitor automatically changes to normal display of page
1.
3. Press the shutter utton of this camera.
Return to previous display
Receive icon
Send icon
63
Using the Camera with a Connected Device
4. Use the [+] and [–] uttons to move the pointer to the receive icon.
• As soon as you perform the a ove step, all of the uttons and con-
trols on the other camera ecome disa led.
5.After you make the setting you want, press the shutter utton
again.
• Pressing the shutter utton receives the selected image from the
other camera.
* You can receive only one image at a time. To send more images,
repeat steps 2 through 5.
I portant!
Never disconnect the ca le, turn power off, or change the function
switch setting while a data communication operation is in progress.
Doing so can damage the camera.
How data transfer affects resolution
• QV-200 QV-700.................................................. FINE NORMAL
NORMAL QUARTER
• QV-200 QV-700.................................................. FINE
• QV-200 QV-100/QV-120/QV-200/QV-300 ........ FINE FINE
NORMAL NORMAL
• QV-200 QV-10/QV-10A/QV-11/QV-30/QV-70.... FINE NORMAL
NORMAL NORMAL
• QV-200 QV-10/QV-10A/QV-11/QV-30/QV-70.... NORMAL NORMAL
Using the Camera with a Connected Device
64
Using QV-Link Software and a Connection Cable
The optionally availa le QV-Link Software and connection ca le
lets you transfer images from your digital camera to a personal
computer. The following are the models of QV-Link software that
support this camera.
Windows Version: LK-10V
Macintosh Version: LK-2V
I portant!
• This camera does not fully support the software that comes with the
LK-1 and LK-1A connection kits for Windows, and the LK-2 and LK-
2A connection kits for the Macintosh. Never try to use the software
that comes with these connections kits with this digital camera.
Connecting to a QV Color Printer or Digital Photo
Printer
DIGITAL
You can connect this camera to a CASIO QV Color Printer or Digital
Photo Printer and print out images that are in camera memory. Use
the communication ca le that comes with the printer to connect the
camera’s DIGITAL terminal to the printer’s terminal.
Applica le printer models: CASIO QG-100, DP-8000
• After connecting to a printer, turn on camera power an slide the
function switch to the PLAY position. See the documentation that
comes with the printer you are using for details on its operation.

65
Using the Camera with a Connected Device
Co puter (Video Capture)
VIDEO
You can use the special video ca le that comes with the camera to
connect directly to the VIDEO IN terminal of a personal computer
equipped with video capture capa ilities.
To transfer ca era i ages to a personal co puter (video
capture)
1. Use the special video ca le that comes with the camera to connect
to the VIDEO IN terminal of the computer.
2. Enter the camera Play ack Mode and display the image you want
to send.
3. Perform the required operation on the computer.
• Consult the owner’s guide that comes with the computer or its video
capture oard for details a out how to set up to capture images.
I portant!
• With this configuration, you cannot send images from the personal
computer to the camera.
• The camera can e connected directly to a personal computer or
video capture oard that is equipped with a VIDEO IN terminal
(RCA pin jack). It cannot e connected directly to an S-VIDEO ter-
minal.
66
Reference
Troubleshooting
No power
Sudden power
failure
indicator
on LCD
No recording
when shutter
utton is
pressed
Power failure
during self-timer
operation
● indicator on
LCD
○ indicator on
LCD
1. Batteries not loaded
correctly.
2. Dead atteries
3. Wrong AC adaptor
1. Operation of Auto
Power Off
2. Low attery power
Use of manganese
atteries.
Power will automatically
turn off shortly.
Function switch sets to
PLAY.
Low attery power
Over exposure
Under exposure
1. Correctly load atter-
ies (page 13).
2. Replace atteries with
new ones (page 13).
3. Use only recom-
mended AC adaptor .
1. Turn power ack on.
2. Replace atteries with
new ones (page 13).
Replace manganese
atteries with alkaline
atteries.
Replace all four atteries
with a set of new ones
(page 13).
Set function switch to
REC.
Replace atteries (page
13).
Change aperture switch
setting to [●] (page 26).
Change aperture switch
setting to [○] (page 26).
Symptom Pro a le Cause Action
Power Supply
Recording
67
Symptom Pro a le Cause Action
Poor LCD image
focus
Poor color and
rightness when
indoors
Recorded image
has greenish
tinge.
Color of
recorded image
is strange.
No +/– utton
operation during
multi-page dis-
play
All pages do not
appear during
auto play.
Use NORMAL for scen-
ery and group photos,
and MACRO for close-
ups (page 24).
Shoot under incandes-
cent or other non-fluores-
cent lighting (page 21).
Change aperture setting
to [●]. Note that this con-
dition is due to CCD char-
acteristics, and does not
indicate camera malfunc-
tion.
1. Reorient the camera
so that light is not shin-
ing directly into lens.
2. This difference does
not indicate a pro lem
or malfunction.
Wait until an image is on
the LCD efore perform-
ing a utton operation.
Unhide protected memo-
ry pages (page 52).
Incorrect NORMAL/
MACRO switch setting
Indoor fluorescent lighting
Strong direct or reflected
sunlight
1. Reflection from sun-
light or light from an-
other source
2. Difference etween
Record Mode and
Play ack Mode char-
acteristics.
Button operation during
page change
Protected memory pages
are hidden.
Recording
Play ack
68
Reference
Symptom Pro a le Cause Action
1. Set function switch to
PLAY (page 31).
2. Connect correctly us-
ing the special video
ca le that comes with
the camera (page 32).
3. Set up the TV cor-
rectly.
Unhide protected memo-
ry pages y holding down
[–] while turning power on
(page 52).
Unhide protected memo-
ry pages y holding down
[–] while turning power on
(page 52).
Unhide protected memo-
ry pages y holding down
[–] while turning power on
(page 52).
Unhide protected memo-
ry pages y holding down
[–] while turning power on
(page 52).
Trou leshooting
1. Function switch set to
REC
2. Incorrect camera-TV
connection
3. Wrong TV set up
Protected memory pages
are hidden.
Protected memory pages
are hidden.
Protected memory pages
are hidden.
Protected memory pages
are hidden.
Camera is con-
nected to a TV,
ut LCD monitor
contents do not
appear on TV
screen.
Some images
are missing.
Cannot use
multi-page dis-
play.
Cannot protect
memory pages.
ALL DATA IS
PROTECTED!
stays on monitor
and images do
not appear.
Play ack

69
Symptom Pro a le Cause Action
1. Unprotect the page
you want to delete
(page 50).
2. Change to a normal-
size, 1-page display
format.
Remove atteries and
disconnect the AC adap-
tor if you are using one.
Restore power and turn
the camera on. If this
does not work, contact
your dealer or an author-
ized CASIO service pro-
vider.
Adjust the BRIGHT set-
ting (page 11).
Remove atteries and/or
unplug the AC adaptor.
Reload atteries and/or
plug in AC adaptor and try
operation again.
Adjust the BRIGHT
( rightness) setting.
1. Connect correctly
(page 58).
2. Turn power on after
connecting ca le.
3. Set function switch to
PLAY (page 31).
1. All pages are pro-
tected.
2. Multi-page display
(page 34) or zoom dis-
play (page 36)
Malfunction due to static
electrical charge or strong
impact
Wrong BRIGHT setting
Malfunction due to expos-
ing camera to electro-
static charge.
Incorrect BRIGHT setting
1. Incorrect ca le con-
nection
2. Camera connected to
is not turned on.
3. Function switch sets to
REC.
Delete opera-
tion does not
start when DEL
is pressed.
All uttons and
switches do not
operate.
Very right or
very dark LCD
image.
No uttons or
switches oper-
ate.
LCD monitor is
too right or too
dark.
Cannot ex-
change data e-
tween two cam-
eras
Other Deletion
70
Reference
Symptom Pro a le Cause Action
Pressing MODE
does not change
the FINE→
NORMAL Menu.
Cannot transfer
data (error
keeps occurring)
Keys of con-
nected camera
are disa led.
1. Correct the situation
and try again.
2. Correct the situation
and try again.
3.Change function
switch setting of re-
ceiving camera to
PLAY (page 31).
4. The sending camera’s
protected memory
pages are hidden. Un-
hide protected memory
pages y holding down
[–] while turning power
on (page 52).
5. Replace atteries or
use the AC adaptor
(page 13).
6. Securely reconnect the
ca le.
Normal operation will re-
turn when you exit data
communications y press-
ing EXIT.
There are no converti le
images in memory.
1. Sending camera’s
memory is empty.
2. Receiving camera’s
memory is full
3. Receiving camera’s
function switch is in
REC position.
4. The message “ALL
DATA IS PROTECT-
ED” is on the monitor
of the sending camera.
5. Low attery (indicated
y )
6. Disconnection of ca le
during data communi-
cation
Connected camera op-
eration is disa led during
data communications.
Trou leshooting
Other
71
Camera is set up to hide protected images, and all
images are protected.
ERROR Error during data communication. Check ca le con-
nections and mode settings.
REMAIN No more memory for FINE images. Use MODE to
change to NORMAL Mode, delete some images, or
change resolution of existing images from FINE to
NORMAL.
MEMORY FULL Not enough memory for further recording. Delete
some images from memory or change resolution of
stored images from FINE to NORMAL.
MEMORY EMPTY No images are stored in memory.
ALL DATA IS
PROTECTED
Messages
72
Reference
Pro lem with internal memory. Perform the following
procedure.
I portant!
The following procedure deletes all images stored in
memory. You can use the optionally availa le floppy
disk drive (FD-10V) or connection kit (LK-10V/LK-2V)
to make copies of images efore deleting them.
1. Holding down the EFFECT
and DEL uttons, turn on
camera power.
2. After checking that the SYSTEM RESET message
is on the display, press the shutter utton to per-
form a system reset or turn power off if you do not
want to perform a system reset.
• Never turn off power while the system reset is in
progress! Doing so will damage camera memory
are require servicing y an authorized service
provider!
• Be sure to power the camera using the AC adap-
tor or a new set of alkaline or lithium atteries.
Weak atteries or manganese atteries can re-
sult in a power failure while the system reset
operation is in progress, causing damage to cam-
era memory.
After the final “SYSTEM RESET” confirmation mes-
sage appears, press the shutter utton.
The display should return to normal after the system
reset is complete.
I portant!
• System reset can result in a change in the order of
images stored in camera memory.
• Corrupted images may e lost entirely.
• If image data is partially corrupted, parts of the im-
age may not e recovera le.
Pro lem with internal memory. Contact your dealer or
an authorized CASIO service provider.
MEMORY ERROR
#1~#3
CONSULT THE
OWNER’S MANUAL!
SYSTEM RESET
YES →SHUTTER
NO →CALL TECH
SUPPORT
MEMORY ERROR
#4
CONSULT THE
OWNER’S MANUAL!

73
Specifications
General
Recording System......Digital (JPEG ased)/Field recording
Signal System ............NTSC
Recording Medium .....Built-in 4MB flash memory
Num er of Memory Pages
FINE(VGA) ............... 64 (approximately 480-k it compressed)
NORMAL(Q-VGA) .... 192 (approximately 160-k it compressed)
Delete Functions ........Single page; All pages (with page protect feature)
Imaging Device ..........1/4-inch CCD (Total Num er of Pixels: 360,000)
Lens ...........................Fixed focus with macro position; F2/f = 3.9mm
Aperture .....................F2/F8 manual switching
Focal Length ..............F2/NORMAL : 0.6 meters to ∞/2’ ~ ∞
F2/MACRO : 12 to 14 cm/4.7” ~ 5.5”
F8/NORMAL : 0.24 meters to ∞/9.4” ~ ∞
F8/MACRO : 9 to 23 cm/3.5” ~ 9”
(from lens protection filter)
Light Metering ............TTL center point y photographic element
Exposure Metering .....Aperture priority AE
Exposure Range ........EV +5 to 18
Exposure Adjustment ..... -2EV to +2EV
Shutter System ..........Electronic
Shutter Speed ............1/8 to 1/4000 second
White Balance ............Automatic
Self-timer....................10-second
Resolution ..................FINE, NORMAL
Monitor .......................61,380-pixel 1.8-inch TFT low-glare color LCD;
dou les as finder
PC Output Image .......480 X 640 pixels (FINE)
240 X 320 pixels (NORMAL)
74
Reference
Terminals ...................DIGITAL; VIDEO OUT; DC IN 6V
Power Supply .............Batteries (AA-size Alkaline or lithium atteries X
4)/AC Adaptor (AD-C60)
Power consumption ...Approximately 3.9 W
Battery Life .................The attery life reference values given elow indi-
cate the amount of time at standard temperature
(25°C) until power automatically turns off due to
attery failure. They do not guarantee that atter-
ies will perform the amount of service indicated.
Battery life is reduced y low temperatures and
continued use.
LR6 (AM3) AA-size alkaline atteries
Approximately 130 minutes (Auto Play)
Approximately 500 images (continuous recording)
FR6 AA-size lithium atteries
Approximately 210 minutes (Auto Play)
Approximately 900 images (continuous recording)
Dimensions ................66(H) X 141(W) X 40(D)mm /
2.6" (H) X 5.5" (W) X 1.6" (D)
Weight ........................Approximately 190g / 6.7oz (excluding atteries)
Accessories................Wrist strap; soft case; special video ca le; Alkaline
atteries (LR6 X 4); cleaning cloth; owner’s
manual
• The liquid crystal panel uilt into this camera is the product of preci-
sion engineering, with an effective pixel rate of 99.99%. This also
means, however that 0.01% of the pixels can e expected to fail to
light or to remain lit at all times.
75
About the ca era’s backlight…
• The camera is equipped with a fluorescent light source to provide
the ack lighting for its LCD.
• The normal service life of the acklight is approximately six years,
when the camera is used for a out two hours a day.
• Should the LCD image appear a normally dark, take the camera to
your dealer or an authorized CASIO service provider to have the
light source replaced. Note that you will e charged for this replace-
ment.
• Under very cold conditions, the acklight may require more time
than normal to light, or reddish ands may appear in the image.
These conditions do not indicate malfunction, and normal operation
should return at higher temperatures.