Casio QV-5700 - 2 User manual

DELETING IMAGES
119
DELETING IMAGES
You can delete the currently displayed image, one or more
selected images, all the images in one or more selected fold-
ers, or all the images in the camera’s memory.
IMPORTANT!
• Image deletion cannot be undone. Before deleting an
image, make sure you no longer need it or you have a
back-up copy saved on your computer, on diskette, or
on some other medium. Be especially careful with
“Deleting All Unprotected Images” operation, which
deletes all unprotected images in memory.
• A protected image cannot be deleted. See “Protecting
Images Against Deletion” on page 125 for details on
protecting and unprotecting images.
• Delete operations are disabled when all of the images
on the camera’s memory card are protected.
Deleting the Displayed Image
Use the following procedure when you want to delete the
image that is currently on the monitor screen.
1. Align the power/function switch with .
2. Rock the control button to the left or right, or
rotate the selector dial to scroll through im-
ages and display the image you want to delete.
3. Press AE-L .
4. In response to the confirmation message that
appears, rock the control button up or down to
select “Yes”.
• If you change your mind and do not want to delete the
image, select “No” instead.
5. Click the control button.
• Displaying a panorama or movie image in step 2 of the
above procedure causes all of the images that make
up the panorama or movie to be deleted.

DELETING IMAGES
120
NOTE
• The camera does not maintain open spaces in its
memory. Deleting an image causes images following
the deleted image to be shifted up to fill in the empty
space created by the deletion. Note that images are
renumbered when they are shifted.
Deleting Selected Images
The following procedure lets you select one or more image
for deletion.
1. Align the power/function switch with .
2. Press MENU.
3. Select “Delete” “Select” and then rock the
control button to the right.
4. Rock the control button to the left or right, or
rotate the selector dial to display the image
you want to delete.
5. Rock the control button up or down to toggle
the displayed image’s icon on and off.
100-1 100-2 100-3
100-1 100-2
01010001.JPG 01010003.JPG01010002.JPG
01010003.JPG
File Names:
01010001.JPGFile Names:

DELETING IMAGES
121
• Any image marked with the icon is marked for de-
letion. It will be deleted when you perform the next
step of this procedure.
• You can repeat steps 4 and 5 to mark and unmark
multiple images if you want.
6. Click the control button.
7. In response to the confirmation message that
appears, rock the control button up or down to
select “Yes”.
• If you change your mind and want to cancel the delete,
select “No” instead.
8. Click the control button.
Deleting All Images in Selected Folders
Use the following procedure to select one or more folder for
deletion of all their images.
1. Align the power/function switch with .
2. Press MENU.
3. Select “Delete” “Folder” and then rock the
control button to the right.
4. Rock the control button to the left or right, or
rotate the selector dial to display the folder
whose images you want to delete.
5. Rock the control button up or down to toggle
the displayed folder’s icon on and off.

DELETING IMAGES
122
• Any folder with the icon is marked for deletion. All
its images will be deleted when you perform the next
step of this procedure.
• You can repeat steps 4 and 5 to mark and unmark
multiple folders if you want.
6. Click the control button.
7. In response to the confirmation message that
appears, rock the control button up or down to
select “Yes”.
• If you change your mind and want to cancel the delete,
select “No” instead.
8. Click the control button.
Deleting All Unprotected Images
Use the following procedure when you want to delete all of
the images currently on the camera’s memory card.
1. Align the power/function switch with .
2. Press MENU.
3. Select “Delete” “All” and then rock the con-
trol button to the right.
4. In response to the confirmation message that
appears, rock the control button up or down to
select “Yes”.
• If you change your mind and want to cancel the delete,
select “No” instead.
5. Click the control button.

MANAGING IMAGES
123
MANAGING IMAGES
The image management capabilities of the camera make it
easy to keep track of images. You can protect images
against deletion, and even use its DPOF feature to specify
images for printing.
Folders and Files
When you shoot the first image on a particular day, the cam-
era automatically creates a folder for that date. All subse-
quent images you shoot on that day are stored in the same
folder.
•For full details about the organization of folders on the
memory card, see “Using a Memory Card to Transfer Im-
age Data”on page 149.
Folders
A folder is created automatically whenever you shoot the
first image on a particular date. The name assigned to the
folder is based on the current date, as described below. You
can have up to 900 folders on a memory card at the same
time (subject to storage capacity restrictions).
Example: Folder created on July 19, which is the 100th
folder on the memory card
•The actual number of files you will be able to store on a
memory card depends on the capacity of the card, image
quality settings, etc.
100_0719
Serial number
Underbar
Month
Day

MANAGING IMAGES
124
11070026.JPG
Month
Day
Serial number
Extension (.JPG/.TIF/.AVI)
Files
Each folder can contain up to 250 image files. If you try to
save the 251st image to a folder, the camera automatically
creates a new folder and stores the image there. The names
assigned to files are based on the current date, as shown
below.
Example: 26th image shot on November 7
•In addition to image files, memory card also contains a
number of other files used by the system for image data
management.
•The actual number of files you will be able to store on a
memory card depends on the capacity of the card, image
quality settings, etc.
•Panorama images are stored as groups of multiple indi-
vidual images.
•If there are more than 250 image files in a folder (due to
copying from another digital camera or other source), only
the first 250 (in name sequence) can be played back.

MANAGING IMAGES
125
Protecting Images Against Deletion
Image protection guards against accidental deletion of im-
ages stored on the camera’s memory card. A protected im-
age cannot be deleted until it is unprotected (page 119). You
can protect and unprotect a single specific image, all the im-
ages in a particular folder, or all images currently on the
memory card.
Protecting Selected Images
1. Align the power/function switch with .
2. Press MENU.
3. Select “Protect”“Select”and then rock the
control button to the right.
4. Rock the control button to the left or right, or
rotate the selector dial to display the image
you want to protect.
5. Rock the control button up or down to toggle
the displayed image’s icon on and off.
•Any image marked with the icon is marked for pro-
tection. It will be protected when you perform the next
step of this procedure. Any image without the icon
will be unprotected.
•You can repeat steps 4 and 5 to turn on the icon
for multiple images if you want.
6. Click the control button to protect all the im-
ages marked for protection, and unprotect the
unmarked images.

MANAGING IMAGES
126
Protecting and Unprotecting All Images
in Selected Folders
1. Align the power/function switch with .
2. Press MENU.
3. Select “Protect”“Folder”and then rock the
control button to the right.
4. Rock the control button to the left or right, or
rotate the selector dial to display the folder
whose images you want to protect.
5. Rock the control button up or down to toggle
the displayed folder’s icon on and off.
•Any folder with the icon is marked for protection.
All its images will be protected when you perform the
next step of this procedure. All images in any folder
without the icon will be unprotected.
•You can repeat steps 4 and 5 to turn on the icon
for multiple folders if you want.
6. Click the control button to protect the images
in all the folders marked for protection, and
unprotect the images in the unmarked folders.

MANAGING IMAGES
127
Protecting and Unprotecting All Images
1. Align the power/function switch with .
2. Press MENU.
3. Select “Protect”“All”and then rock the con-
trol button to the right.
4. Select the memory protection setting you
want, and then click the control button to apply
it.
To do this:
Protect all images on the memory card
Unprotect all images on the memory card
Select this:
On
Off
DPOF
The letters “DPOF”stand for “Digital Print Order
Format”, which is a format for recording on a
memory card or other medium which digital cam-
era images should be printed and how many
copies of the image should be printed. Then you
can print on a DPOF-compatible printer or at a
professional print service from the memory card
in accordance with the file name and number of
copies settings recorded on the card.
With this camera, you should always select im-
ages by viewing them on the monitor screen.
Do not specify images by file name without
viewing the file contents.
■DPOF Settings
File name, number of copies, date

MANAGING IMAGES
128
Making DPOF Settings for Particular Im-
ages
1. Align the power/function switch with .
2. Press MENU.
3. Select “DPOF”“Select”and then rock the
control button to the right.
4. Rock the control button to the left or right, or
rotate the selector dial to display the image
you want to print.
5. Use the button operations described below to
make the DPOF settings you want.
If you want to do this:
Decrease the number of
copies value
Increase the number of cop-
ies value
Toggle printing of the record-
ing date on and off
Do this:
Rock the control button
down.
Rock the control button up.
Press DISP.
•Note that some printers may not support recording
date printing.
•An image selected for printing is marked by the
icon.
•An image for which printing of the recording date is
turned on is marked with the icon.
•You can repeat steps 4 and 5 to make DPOF settings
for multiple image files, if you want.
6. After you are finished making the settings you
want, click the control button to complete the
procedure.

MANAGING IMAGES
129
Making DPOF Settings for Particular
Folders
1. Align the power/function switch with .
2. Press MENU.
3. Select “DPOF”“Folder”and then rock the
control button to the right.
4. Rock the control button to the left or right, or
rotate the selector dial to display the folder
whose images you want to print.
5. Use the same procedures as those described
in step 5 under “Making DPOF Settings for Par-
ticular Images”on page 128 to make the DPOF
settings you want.
6. After you are finished making the settings you
want, click the control button to complete the
procedure.
Making DPOF Settings of All Images on
the Memory Card
1. Align the power/function switch with .
2. Press MENU.
3. Select “DPOF”“All”and then rock the con-
trol button to the right.
4. Select “Set print order”and then rock the con-
trol button to the right.
•To cancel printing, select “Cancel print order”.
5. Use the button operations described below to
make the DPOF settings you want.

MANAGING IMAGES
130
If you want to do this:
Decrease the number of
copies value
Increase the number of cop-
ies value
Toggle printing of recording
dates on and off
Do this:
Rock the control button
down.
Rock the control button up.
Press DISP.
•Note that some printers may not support recording
date printing.
6. After you are finished making the settings you
want, click the control button to complete the
procedure.
PRINT Image Matching II
Images include PRINT Image Matching
II data (mode setting and other camera
setup information). A printer that sup-
ports PRINT Image Matching II reads
this data and adjusts the printed image
accordingly, so your images come out
just the way you intended when you re-
corded them.
*PRINT Image Matching and PRINT Im-
age Matching II are registered trade-
marks of SEIKO EPSON Corporation.

MANAGING IMAGES
131
Exif Print
Exif Print is an internation-
ally supported, open stan-
dard file format that makes it
possible to capture and dis-
play vibrant digital images
with accurate colors. With
Exif 2.2, files include a wide
range of shooting condition
information that can be inter-
preted by an Exif Print
printer to produce better-
looking prints.
IMPORTANT!
•Information about the availability of Exif Print compat-
ible printer models can be obtained from each printer
manufacturer.

OTHER SETTINGS
132
Changing the Menu Language
When you first purchase your camera, it comes with a set of
three different menu languages from which you can choose.
The bundled CD-ROM contains additional menu language
sets that you can install if you want. In all, you get a total
choice of six different languages (English, German, French,
Spanish, Italian and Japanese).
IMPORTANT!
•You can have only one 3-language set installed on the
camera at a time.
1. Align the power/function switch with or .
2. Press MENU.
3. Select “Language”and then rock the control
button to the right.
4. Select the language you want, and then click
the control button to apply it.
•This displays the language selection menu.
•The following shows the settings for all six of the avail-
able languages.
To do this:
Display menus in English
Display menus in German
Display menus in French
Display menus in Spanish
Display menus in Italian
Display menus in Japanese
Select this setting:
English
Deutsch
Français
Español
Italiano
OTHER SETTINGS
5. Press MENU to exit the setting procedure.
Installing a Different Language Set
The CD-ROM that comes bundled with the camera contains
two menu text language files, each of which contains a set of
three different languages. You can copy the file that contains
the language set you want to a memory card and then install
it on the camera.
•The following three language sets of menu data are avail-
able on the CD-ROM.
Language Set
English, German, French
Spanish, Italian, Japanese
File Name
menu_egf.bin
menu_sij.bin

OTHER SETTINGS
133
■Transferring Menu Language Data to a
Memory Card
The procedure you should use to transfer a language set file
to a memory card depends on whether you have a Windows
or a Macintosh computer.
●Windows
IMPORTANT!
•Depending on the operating system you are running,
you may need to install the USB driver if you are con-
necting the camera to your computer for the first time.
See page 147 for more information.
1. Set the bundled CD-ROM into your computer’s
CD-ROM drive.
•This displays the CD-ROM menu.
•If you have auto run turned off for your CD-ROM drive,
start up the CD-ROM menu by double-clicking “My
Computer”and then the CD-ROM volume named
CASIO.
2. Connect the camera to your computer using
the USB cable (page 147).
•Use the USB cable that comes bundled with the cam-
era.
•You can also access the memory card directly from
your computer without connecting to the camera. See
page 149 for more information.
3. On the CD-ROM menu that appears on your
computer screen, select “Language”.
4. Select the language set you want to use.
5. Click OK.
•This opens a separate window for the folder that con-
tains the camera menu language file you selected.
6. Select “Open camera”.
•This opens a window for the memory card root direc-
tory.
7. Click OK.
8. Copy the “menu_∗∗∗.bin”file from the window
that opened in step 5 to the window that
opened in step 7.
9. Disconnect the USB cable connecting the cam-
era to your computer (page 149).
•If you accessed the memory card directly with your
computer, use the required procedure to eject the
memory card.

OTHER SETTINGS
134
●Macintosh
1. Set the bundled CD-ROM into your Macintosh’s
CD-ROM drive.
2. Connect the camera to your Macintosh using
the USB cable (page 147).
•Use the USB cable that comes bundled with the cam-
era.
•You can also access the memory card directly from
your Macintosh without connecting to the camera. See
page 149 for more information.
3. Open the CD-ROM volume named “CASIO”.
4. Open the “Camera Language”folder.
5. Open the folder that contains the language set
you want to use.
6. Open the camera memory card displayed
(mounted) on your Macintosh screen.
7. Copy the “menu_∗∗∗.bin”file from the folder
you opened in step 4 to the folder you opened
in step 5.
8. Disconnect the USB cable connecting the cam-
era to your Macintosh (page 149).
•If you accessed the memory card directly with your
Macintosh, use the required procedure to eject the
memory card.
■ Loading Menu Language Data into the Camera
IMPORTANT!
•If power to the camera is cut off while you are loading
menu language data, the camera’s program will not be
able to run correctly and you will need to take your
camera in for repair before you can use it again. Be-
cause of this you must observe the following precau-
tions whenever performing the procedure below.
—Use the AC adaptor to power the camera or load a
new set of recommended batteries into the cam-
era.
—Never touch the camera while the menu language
data is being loaded.

OTHER SETTINGS
135
1. Insert the memory card you created using one
of the procedures under “Transferring Menu
Language Data to a Memory Card”on page 133
into the camera.
2. Hold down MENU as you turn on the camera.
•To turn on the camera, align the power/function switch
with or .
•The above screen does not appear if you are running
on battery power and your batteries are too low. The
normal camera display screen appears instead. If this
happens, switch to AC adaptor power or load a new
set of recommended batteries into the camera.
•If the camera has multiple menu language data files
installed, you can rock the control button up or down to
select a data file.
3. Press the shutter release button.
•The message “NOW LOADING”appears on the moni-
tor screen, indicating that menu language data is be-
ing loaded.
•The message “COMPLETE!”appears when the menu
data loading procedure is complete. After about four
seconds, the monitor screen changes to the normal
camera display.

OTHER SETTINGS
136
Turning the Confirmation Beep On and Off
Use the following procedure to turn the beep that sounds
each time you press a button on and off.
1. Align the power/function switch with or .
2. Press MENU.
3. Select “Beep”and then rock the control button
to the right.
4. Select the setting you want, and then click the
control button to apply it.
To do this:
Turn on the confirmation beep
Turn off the confirmation beep
Select this setting:
On
Off
5. Press MENU to exit the setting procedure.

CONNECTING TO EXTERNAL EQUIPMENT
137
CONNECTING TO EXTERNAL EQUIPMENT
Your camera has three terminals for connection to external
equipment: a VIDEO OUT terminal, a DIGITAL terminal (re-
mote shutter release terminal), and a USB port. You can use
these terminals to connect the camera to a television, VCR,
computer, or other external equipment. See page 103 for in-
formation about the DIGITAL port (remote shutter release
terminal).
IMPORTANT!
•Be sure to turn off both the camera and the other
equipment before making any connections.
•Check the documentation that comes with your other
equipment for information you may need to know
when making connections.
•Leaving the same image displayed on a television or
computer display screen for very long periods can
cause the image to be “burned in”on the screen.
When this happens, a faint after-image remains on the
screen, even after you disconnect the camera. To
avoid this, you should not leave the same image dis-
played on such a screen for very long periods.
•This camera does not support cable transfer of data
with other CASIO digital cameras, portable tele-
phones, etc.
Connecting to a Television
Images being displayed on the camera’s monitor screen,
whether for recording or playback, can also be displayed on
the screen of a connected television. Connect the camera to
a TV as illustrated below.
INPUT
VIDEO LR
AUDIO
TV
VIDEO OUT
terminal
Special video cable
(bundled with
camera.)
VIDEO IN
terminal

CONNECTING TO EXTERNAL EQUIPMENT
138
1. Use the video cable to connect the camera to
the television as shown in the illustration.
2. Perform the required operation on the TV to set
it up for video input.
•See the documentation that comes with your televi-
sion for information about how to do this.
3. Perform normal playback and recording opera-
tions on the camera.
IMPORTANT!
•Icons and other indicators that normally appear on the
camera’s monitor screen will also appear on the
screen of the connected TV.
Selecting the Video Output Signal Mode
Your camera supports both NTSC (used in U.S., Japan, and
other countries) and PAL (used in Europe and other areas)
video output signal systems. The video system you should
use depends on the country of origin of the equipment you
are connecting to the camera’s VIDEO OUT terminal.
IMPORTANT!
•When you have PAL selected as the video signal out-
put mode, the monitor screen is turned off when you
connect the cable to the VIDEO OUT terminal.
1. Align the power/function switch with or .
2. Press MENU.
3. Select “Video Out”and then rock the control
button to the right.
4. Select “NTSC”or “PAL”and then click the
control button to apply it.
5. Press MENU to exit the setting procedure.