Casio EX-M1 - EXILIM Digital Camera Programming manual

FILE MANAGEMENT
63
FILE MANAGEMENT
The file management capabilities of the camera make it easy
to keep track of images. You can protect files against dele-
tion, and even use its DPOF feature to specify images for
printing.
Folders
Your camera automatically creates a directory of folders in
its built-in flash memory or on the memory card to store im-
ages.
Memory Folders and Files
An image you record is automatically stored in a folder,
whose name is a serial number. You can have up to 900
folders in memory at the same time. Folder names are gen-
erated as shown below.
Example: Name of the 100th folder.
Each folder can hold files numbered up to 9,999.
Trying to store the 10,000th file in a folder causes the next
serially numbered folder to be created. Folder names are
generated as shown below.
Example: Name of the 26th file
Extension
CIMG0026.JPG
Serial number (4 digits)
•The actual number of files you will be able to store on a
memory card depends on the image quality settings, ca-
pacity of the card, etc.
•For details about the directory structure, see “Memory Di-
rectory Structure”on page 92.
100CASIO
Serial number (3 digits)

FILE MANAGEMENT
64
4. Rock the controller
up or down to select
“On”, and then click.
•A file that is protected is
indicated by the
mark.
•To unprotect a file, se-
lect “Off”in step 4, and
then click.
5. Press MENU to exit the menu screen.
Protecting Files
Once you protect a file it cannot be deleted. You can protect
files individually or you can protect all files in memory with a
single operation.
To protect a single file
1. In the PLAY mode, press MENU.
2. Select the “PLAY”
tab, select “Protect”,
and then rock the
controller to the right.
3. Rock the controller left or right to scroll
through files and display the one you want to
protect.

FILE MANAGEMENT
65
To protect all files in memory
1. In the PLAY mode, press MENU.
2. Select the “PLAY”tab, select “Protect”, and
then rock the controller to the right.
3. Rock the controller up or down to select “All
Files : On”, and then click.
•To unprotect all files, click the controller in step 3 so
the setting shows “All Files : Off.”
4. Press MENU to exit the menu screen.
DPOF
The letters “DPOF”stand for “Digital Print Or-
der Format”, which is a format for recording on
a memory card or other medium which digital
camera images should be printed and how
many copies of the image should be printed.
Then you can print on a DPOF-compatible
printer or at a professional print service in ac-
cordance with the file name and number of
copies settings recorded on the card.
With this camera, you should always select images by view-
ing them on the monitor screen. Do not specify images by file
name without viewing the file contents.
■DPOF Settings
File Name,
number of copies,
date

FILE MANAGEMENT
66
To configure print settings for a single
image
1. In the PLAY mode,
rock the controller up
(DPOF).
2. Rock the controller
up or down to select
“Select images”, and
then click.
3. Rock the controller left or right to scroll
through images and display the one you want
to print.
To insert the date during printing
NOTE
•To insert the date during printing, you need to use the
following procedure to turn on the date insertion fea-
ture before configuring other print settings.
1. In the PLAY mode, rock the controller up
(DPOF).
2. Rock the controller up or down to select
“Date”, and then click.
3. Rock the controller up or down to select “On”,
and then click.
•If you do not want the date inserted, select “Off”.

FILE MANAGEMENT
67
To configure print settings for all images
1. In the PLAY mode, rock the controller up
(DPOF).
2. Rock the controller up or down to select “All
images”, and then click.
3. Rock the controller up or down to specify the
number of copies.
•You can specify up to 99 for the number of copies.
Specify 00 if you do not want to have the image
printed.
4. Click the controller to complete the procedure.
4. Rock the controller up or down to specify the
number of copies.
•You can specify up to 99 for the number of copies.
Specify 00 if you do not want to have the image
printed.
•Repeat steps 3 through 4 to configure settings for
other images, if you want.
5. Click the controller to complete the procedure.

FILE MANAGEMENT
68
PRINT Image Matching II
Images include PRINT Image Matching
II data (mode setting and other camera
setup information). A printer that sup-
ports PRINT Image Matching II reads
this data and adjusts the printed image
accordingly, so your images come out
just the way you intended when you re-
corded them.
*SEIKO EPSON Corporation holds the copy-
right for PRINT Image Matching and PRINT
Image Matching II.
Exif Print
Exif Print is an internation-
ally supported, open stan-
dard file format that makes it
possible to capture and dis-
play vibrant digital images
with accurate colors. With
Exif 2.2, files include a wide
range of shooting condition
information that can be inter-
preted by an Exif Print
printer to produce better-
looking prints.
IMPORTANT!
•Information about the availability of Exif Print compat-
ible printer models can be obtained from each printer
manufacturer.

FILE MANAGEMENT
69
4. Rock the controller left or right to select the file
you want to copy to the FAVORITE folder.
5. Rock the controller up or down to select
“Save”, and then click.
•This copies the displayed file to the FAVORITE folder.
NOTES
•Copying an image file with the above procedure cre-
ates a 320 x 240-pixel QVGA-size image in the FA-
VORITE folder.
•A file copied into the FAVORITE folder is automati-
cally assigned a file name that is a serial number
(0001 to 9999).
Using the FAVORITE Folder
You can copy snapshots from a file storage folder (page 92)
to the FAVORITE folder in built-in memory (page 92). This
makes it easy to keep track of important files.
To copy a file to the FAVORITE folder
1. In the PLAY mode, press MENU.
2. Select the “PLAY”
tab, select “Favor-
ites”, and then rock
the controller to the
right.
3. Rock the controller
up or down to select
“Save”, and then
click.
•This displays the names
of the files in built-in
memory or on the
loaded memory card.

FILE MANAGEMENT
70
To display a file in the FAVORITE folder
1. In the PLAY mode, press MENU.
2. Select the “PLAY”tab, select “Favorites”, and
then rock the controller to the right.
3. Rock the controller up or down to select
“Show”, and then click.
•If the FAVORITE folder is empty, the message “No
Favorites file!”appears.
4. Rock the controller
right (forward) or left
(back) to scroll
through the files in
the FAVORITE folder.
NOTE
•Holding the controller to the left or right scrolls at high
speed.
File Name
To delete a file from the FAVORITE folder
1. In the PLAY mode, press MENU.
2. Select the “PLAY”tab, select “Favorites”, and
then rock the controller to the right.
3. Rock the controller up or down to select
“Delete”, and then click.
4. Rock the controller left or right to select the file
you want to delete from the FAVORITE folder.
5. Rock the controller up or down to select
“Delete”, and then click.
•This deletes the file from the FAVORITE folder
IMPORTANT!
•You cannot use the delete operations on page 61 to
delete images from the FAVORITE folder. Performing
the memory format operation (page 73), however,
does delete FAVORITE folder files.

OTHER SETTINGS
71
OTHER SETTINGS
Turning the Key Tone On and Off
Use the following procedure to turn the tone that sounds
when you press a key on and off.
1. In the REC mode or PLAY mode, press MENU.
2. Select the “Set Up”tab, select “Beep”, and
then rock the controller to the right.
3. Rock the controller up or down to select the
setting you want, and then click.
Specifying an Image for the Startup Screen
You can specify an image you recorded as the startup
screen image, which causes it to appear on the monitor
screen for about two seconds whenever you turn on the
camera.
1. Enter the REC mode or the PLAY mode.
•If you are specifying an image for the startup screen,
display that image before advancing to the next step.
•You can specify a snapshot image or a movie image
that is two seconds or less in length.
2. Press MENU.
3. Select the “Set Up”tab, select “Startup”, and
then rock the controller to the right.
4. Rock the controller up or down to select the
setting you want, and then click.
Select this:
On
Off
To do this:
Use the currently displayed image as
the startup screen image
Disable the startup screen
Select this:
On
Off
To do this:
Turn on the key tone
Turn off the key tone

OTHER SETTINGS
72
Changing the Date and Time Setting
Use the following procedure to change the date and time
setting.
1. In the REC mode or PLAY mode, press MENU.
2. Select the “Set Up”tab, select “Adjust”, and
then rock the controller to the right.
3. Set the date and the time.
Changing the Date Format
You can select from among three different formats for dis-
play of the date.
1. In the REC mode or PLAY mode, press MENU.
2. Select the “Set Up”tab, select “Date Style”,
and then rock the controller to the right.
3. Rock the controller up or down to select the
setting you want, and then click.
Example: October 23, 2002
Select this format:
YY/MM/DD
DD/MM/YY
MM/DD/YY
To display the date like this:
02/10/23
23/10/02
10/23/02
Do this:
Rock the controller left or
right.
Rock the controller up or
down.
To do this:
Move the cursor between
settings
Change the setting at the
current cursor location
4. Click to register the settings and exit the set-
ting screen.

OTHER SETTINGS
73
Changing the Display Language
You can use the following procedure to select one of six lan-
guages as the display language.
1. In the REC mode or PLAY mode, press MENU.
2. Select the “Set Up”tab, select “Language”,
and then rock the controller to the right.
3. Rock the controller up or down to select the
option you want, and then click.
:Japanese
English :English
Français :French
Deutsch :German
Español :Spanish
Italiano :Italian
Formatting Built-in Memory
Formatting built-in memory deletes any data stored in it.
IMPORTANT!
•Note that data deleted by a format operation cannot
be recovered. Check to make sure you do not need
any of the data in memory before you format it.
•Formatting memory deletes all files in memory, even
files that are protected (page 65).
1. Check to make sure there is no memory card
loaded in the camera.
•If there is a memory card loaded in the camera, re-
move it (page 75).
2. In the REC mode or PLAY mode, press MENU.
3. Select the “Set Up”tab, select “Format”, and
then rock the controller to the right.
4. Rock the controller up or down to select
“Format”, and then click.
•To exit the format operation without formatting, select
“Cancel”.

USING A MEMORY CARD
74
USING A MEMORY CARD
You can expand the storage capabilities of your camera by
using a commercially available memory card (SD memory
card or MultiMedia Card). You can also copy files from built-
in flash memory to a memory card and from a memory card
to flash memory.
•Normally, files are stored in built-in flash memory. When
you insert a memory card, however, the camera automati-
cally stores files to the card.
•Note that you cannot save files to built-in memory while a
memory card is installed in the camera.
IMPORTANT!
•Make sure you turn off the camera before inserting or
removing a memory card.
•Be sure to orient the card correctly when inserting it.
Never try to force a memory card into the slot when
you feel resistance.
•See the instructions that come with the memory card
for information about how to use it.
•Though the camera also supports use of an MMC
(MultiMediaCard) in place of an SD memory card, the
data processing speed in the case of an MMC is much
slower than that for an SD memory card. Because of
this, we recommend that you choose an SD memory
card whenever possible.
•SD memory cards have a write protect switch, which
you can use to protect against accidental deletion of
image data. Note, however, if you write protect an SD
memory card, you must remove write protection
whenever you want to record to it, format it, or delete
any of its files.

USING A MEMORY CARD
75
Using a Memory Card
To insert a memory card into the camera
1. Making sure that the
contacts of the memory
card are facing towards
the top of the camera,
carefully insert the card
into the slot as far as it
will go.
To remove a memory card from the camera
1. Press the memory card
into the camera and then
release it. This will cause
the card to come part way
out of the camera.
2. Pull the memory card out
of the slot.
IMPORTANT!
•Never insert any other object besides a memory card
into the camera’s card slot. Doing so creates the risk
of damage to the camera and card.
•If you are not using a memory card, be sure to insert
the dummy card into this slot to protect against dust
and damage.
•The dummy card is intended for use with this camera
only. Never insert it into the card slot of any other type
of device.
•Should water or any foreign object ever get into the
card slot, immediately turn off the camera, remove the
battery, and contact your dealer or nearest CASIO
authorized service provider.
•Never remove a card from the camera while the op-
eration/flash charge lamp is flashing. Doing so can
cause the files save operation to fail, and even dam-
age the memory card.
Contacts

USING A MEMORY CARD
76
Formatting a Memory Card
Formatting a memory card deletes any data already stored
on it.
IMPORTANT!
•Be sure to use the camera to format a memory card.
Formatting a memory card on a computer and then
using it in the camera can slow down data processing
by the camera. In the case of an SD card, formatting
on a computer can result in non-conformity with the
SD format, causing problems with compatibility, op-
eration, etc.
•Note that data deleted by a memory card format op-
eration cannot be recovered. Check to make sure you
do not need any of the data on the memory card be-
fore you format it.
•Formatting a memory card that contains files deletes
all the files, even those that are protected (page 65).
1. Load the memory card into the camera.
2. Turn on the camera. Next, enter the REC mode
or PLAY mode and press MENU.
3. Select the “Set Up”tab, select “Format”, and
then rock the controller to the right.
4. Rock the controller up or down to select
“Format”, and then click.
•To exit the format operation without formatting, select
“Cancel”.

USING A MEMORY CARD
77
Copying Files
Use the procedures below to copy files between built-in
memory and a memory card.
To copy all the files in built-in memory to
a memory card
1. Load the memory card into the camera.
2. Turn on the camera. Next, enter the PLAY
mode and press MENU.
3. Select the “PLAY”
tab, select “Copy”,
and then rock the
controller to the right.
Memory Card Precautions
•Use only an SD memory card or a MultiMediaCard with this
camera. Proper operation is not guaranteed when any
other type of card is used.
•Electrostatic charge, electrical noise, and other phenom-
ena can cause data to become corrupted or even lost. Al-
ways make sure that you always back up important data on
other media (MO disc, computer hard disk, etc.)
•If a memory card starts to behave abnormally, you can re-
store normal operation by reformatting it. However, we rec-
ommend that you always take along more than one
memory card whenever using the camera far away from
the home or office.
•We recommend that you format a memory card before us-
ing it for the first time after purchasing it, or whenever the
card you are using seems to be the cause of abnormal im-
ages.
•Before starting a format operation, check to make sure that
the battery is fully charged. Power interruption during the
format operation can result in improper formatting, and
even damage the memory card and make it unusable.

USING A MEMORY CARD
78
To copy a file from a memory card to
built-in memory
1. Perform steps 1 through 3 of the procedure un-
der “To copy all the files in built-in memory to a
memory card.”
2. Rock the controller up or down to select “Card
Built-in”, and then click.
3. Rock the controller left or right to select the file
you want to copy.
4. Rock the controller up or down to select
“Copy”, and then click.
•This starts the copy operation and displays the mes-
sage “Busy... Please wait...”
•The file reappears on the monitor screen after the
copy operation is complete.
4. Rock the controller up or down to select “Built-
in Card”, and then click.
•This starts the copy operation and displays the mes-
sage “Busy... Please wait...”
•After the copy operation is complete, the monitor
screen shows the last file in the folder.

USING THE CAMERA WITH A COMPUTER
79
USING THE CAMERA WITH A COMPUTER
The USB cradle that comes with your camera makes it easy
to connect to a computer that is equipped with a USB port.
You can also transfer files using the memory card, if your
computer is equipped to read memory cards.
Computer
Page 87
USB
USB cable (bundled) USB port
Installing the Software on the CD-ROM
Before you can exchange files with your computer, you first
need to install the software contained on the CD-ROM that
comes with the camera.
About the bundled CD-ROM
The CD-ROM that comes bundled with the camera contains
the following software.
Photo Loader (for Windows/Macintosh)
This software loads image data saved in JPEG and AVI for-
mat from a digital camera onto your computer.
• The Windows version lets you transfer WAV format audio
data to the camera.
Photohands (for Windows)
This software is used to retouch and print image files.
USB Driver for Mass Storage (for Windows/Macintosh)
This is a software application for connecting a digital camera
to your personal computer via USB.
If you are using Windows XP or Mac OS 9/OS X, do not in-
stall the USB driver contained in the CD-ROM. USB commu-
nication is available simply by connecting to your PC with the
USB cable.

USING THE CAMERA WITH A COMPUTER
80
Internet Explorer (for Macintosh)
This is a browser for reading HTML files. Images loaded by
Photo Loader will be stored and maintained in a folder called
a “Library”. This software is used to list images in a library on
your computer display.
DirectX (for Windows)
This provides an extended tool set including Codec to
handle movie files taken using a digital camera in Windows
98/2000.
This does not have to be installed if using Windows XP/Me.
Acrobat Reader (for Windows/Macintosh)
This software reads electronically documented PDF files. It
is used to read the instruction manuals of Digital Camera,
Photo Loader and Photohands included on the attached CD-
ROM.
NOTE
• See the user documentation files (PDF) on the
bundled CD-ROM for details about using Photo
Loader and Photohands. See “Reading instruction
manual (PDF file)” on pages 83 (Windows) and 86
(Macintosh) of this manual for more information.
Operating environment
The operating environment required may vary depending on
the software used. Check as follows.
Windows
Check the system requirements for the software to be used
by referring to the “Read me” file in the CD-ROM provided.
Macintosh
Read the “readme” file included on the attached CD-ROM.

USING THE CAMERA WITH A COMPUTER
81
Installing the software
Install the software included in the attached CD-ROM on
your computer.
NOTE
• There is no need to install software that has already
been installed on your PC.
Windows version
The CD-ROM includes the applications and instruction
manuals for each language.
Check the CD-ROM menu screen to determine whether the
applications and instruction manuals are present for a par-
ticular language.
■Before using
Start the computer and insert
the CD-ROM into the CD-
ROM drive. The MENU will
automatically be launched.
NOTE
• Depending on the configuration of the computer, the
menu may not launch automatically. In this case, open
the driver in which the CD-ROM is inserted, and
double-click “menu.exe” to launch the MENU.
■Selecting the Language
First, select the language you will use. Depending on the lan-
guage, some software cannot be used.
Here “English” is selected.
1. Click the menu for switching the language in
the MENU screen, and select the language to
be used.

USING THE CAMERA WITH A COMPUTER
82
■Reading “Read me”
Read “Read me” for the application software before install-
ing it. This contains necessary information for installing the
software.
1. Click Software in the menu.
2. Click the application you want to install.
3. Click the [Read me] button.
IMPORTANT!
• See the “Read me” file and check the procedure for
retaining the previously used library information when
upgrading or reinstalling Photo Loader, or when
changing your PC.
■Software Installation
1. Click on [Software] in the menu.
2. Click on the application you want to install.
3. Click [Install] button.
4. Follow the installation instructions.
IMPORTANT!
• If the procedures are not followed as described, you
may not be able to browse existing library control in-
formation and calendar type HTML files with Photo
Loader. In some cases, image files loaded may be
lost.
• When using operating systems other than Windows
XP, do not connect the camera to the PC without in-
stalling the USB driver.