disassemble the leg with sponge cover ,
and connect with center column separately
to transformed to monopod
22°
55°
80°
The parts can be separately
to use, like the tripod or head.
Before using the equipment to shooting, do please check all knobs were ajustable
well or not.Fix the quick release plate,release the ball head+pedestal lock and
adjust the intended shooting angle for shooting.Do please hold your camera while
releasing the lock, in case the camera flip over and damaged.
Press the angle adjuster to adjust the angle of the leg,
there are three stops of leg angle adjustable, e.g. 80 degree,
55 degree, 22 degree
The center column can be adjustable the length by adjustable knob.
Rotate the leg adjuster to adjust the leg's length,and push back leg and rotate the knob to
retract the leg。
Remove
center column
the hook on Get out the center column Center column inverted
Mount the camera on
quick release plate
Release+lock the
quick release clamp
Adjustable the roating ball
forintended shooting angle.
Control the base(release+lock)
Bubble level
27.9
36.4
46
56.7
