CB2 PHOOS table User manual

(We recommend the use of hand tools instead of power tools)
Made in China - r04 Page 1 of 3
phoos TABLE
hardware
tools required
Thank you for purchasing the Phoos Table. This page
lists all the contents included in the box. Please take the
time to identify the hardware as well as the individual
components to this product. As you unpack and
prepare for assembly, place the contents on a carpeted
or padded area to protect them from damage.
Note:2 people are required to safely assemble this product.
Missing hardware?
Please call 800.606.6387 for replacements.
1 - table assembly
16 - plastic
washers
20 - metal
washers
Customer Service 800.606.6252 I Latest instructions available at www.cb2.com
allen wrench (included)
components
4 - 3 man rods
4 - legs
philips head screwdriver
8 - rod
end caps
2 - leg end
panels
13 - B players
8 - rod handles
4 - leg
levelers
assembly
16 - bumpers
13 - A players
2 - 2 man rods
2 - 5 man rods
2 - soccer balls
8 - small
phillip bolts
8 - medium
phillip bolts
26 - large
phillip bolts
8 - small
allen bolts
12 - large
allen bolts
1
Attach 1 leg B and 1 leg C with 1 leg end panel.
Secure each leg to leg end panel with 2 metal
washers and 2 small allen bolts as shown.
Secure, but do not over tighten, bolts using an
allen wrench. Repeat steps for remaining leg
end panel and legs.
NOTE: Do not over
tighten the bolts.
leg B
leg C
leg end
panel
#1
#2 #3
#4
#5
#6
#7
#8
#9
#10 #11
#12
#13
#14
#15 #16
#18 #19#17 #20
#21
#2
#3
#4
#15
#16

Made in China - r04 Page 2 of 3
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
leg leveler
2
phoos TABLE
A. With the assistance of another adult, place table assembly upside down onto a clean, padded surface.
Attach 2 leg assemblies to table assembly with 6 metal washers and 6 large allen bolts per leg assembly
as shown. Secure using an allen wrench.
B. Attach 4 leg levelers to each leg as shown. Turn each leg leveler clockwise to secure.
C. With the assistance of another adult, position unit upright. If table is not level, adjust each leveler by
turning clockwise or counter clockwise.
table
assembly
NOTE: Make sure
leg assemblies are
positioned as shown
A
B
leg
assembly
leg
assembly
A
#1
#21
#16
#17
#16
#17

Made in China - r04 Page 3 of 3
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
IMPORTANT NOTE: Make sure to install
all rod handles for all A players on one side
of the table and all rod handles for all B players
on the other side of the table as shown.
3
phoos
TABLE
A. Slide 1 bumper, 1 plastic washer, 5 A players, 1 plastic washer and 1 bumper onto 1 5-man rod as
shown. Secure each A player with 1 large phillips bolt using a phillips head screwdriver. Do not over tighten
bolts.
B. Attach 1 rod end cap and 1 rod handle to 5-man rod as shown. Secure rod end cap with 1 small phillips
bolt and rod handle with 1 medium phillips bolt. Repeat steps A & B for remaining rods for A and B players.
Assembly is now complete.
IMPORTANT NOTE: Make sure to install all rod handles for all A players on one side of the table and all
rod handles for all B players on the other side of the table as shown.
A player
5-man rod
A player
3-man rod
A player
2-man rod A player
3-man rod
B player
5-man rod
B player
3-man rod
B player
2-man rod
B player
3-man rod
A player
large
phillips
bolt
medium
phillips
bolt
small
phillips
bolt
rod
end cap
rod
handle
bumper
bumper
plastic washer
plastic washer
5-man rod
cleaning & care Clean surfaces witha dry or damp soft cloth.Do not use abrasive cleaners.
A
AA
A
B
B
#5
#6
#7
#5
#5
#5
#7
#6
#7
#8
#12
#13
#20
#18
#19
#10
#11
#10
#11