CCS CRO16 User manual

Hidden Bluetooth
Amplifier
Part no. CRO16
OPERATING MANUAL
Unit 4 Lister Street, Dudley Hill, Bradford
West Yorkshire, BD4 9PQ.
Tel: [phone]
Fax: [phone]
Email: [email protected]o.uk
www.classiccarstereo.co.uk
Any further volume adjustments should
be made using the volume control on your
Bluetooth device.
Alternatively you can connect a device using
the 3.5 mm jack socket on the amplifier instead
of a Bluetooth connection.
If four speakers are connected to the amplifier,
the front or rear volume a can be adjusted to
balance the volume for an even distribution
of sound.
The amplifier can be mounted out of sight
behind the dashboard, however, please note
that there should be sufficient air gap around
the unit to allow for cooling.
For positive earth vehicles we can supply our
positive earth converter part no CA002.
Please note that this device does not support
hands free telephone calling and is purely for
music streaming.
You will still be able to make and receive calls
via your handset.

VOL REAR - Adjusts volume level of rear
speakers
VOL FRONT - Adjusts volume level of front
loudspeakers
AUX - Audio input for portable audio devices
BT INDICATOR - Rapid flashing blue - unit
powering up or connecting with device, flashing
alternate blue/red - awaiting a device to be
paired, solid blue - device paired.
POWER INDICATOR - Illuminates when unit is
powered up
HP REAR - Not used in classic car installations
FULL / HP SWITCH - Should be set on full
LP / FULL SWITCH - Should be set on full
RL FL RR FR - Not used in classic car
installations
HI LOW - Should be in low position
VOLTAGE - 10-16V negative earth
RMS @ 4 Ohms - 4 x 60w
MAX @ 4 Ohms - 4 x 250w
FREQUENCY RESPONSE - 20HZ - 20 KHZ
FUSE RATING - 10 Amps
Pairing a device - Search for Bluetooth devices
then select / connect to “ CCS AUDIO”
The AUX/RCA switch should be set to AUX
Volume adjustment – set the volume levels
front and rear on the amplifier to the centre
position using a small screwdriver.