cctv camera pros SH-200M1 User manual

CCTV Camera Pros – Wireless Camera System
SH-200M1 & SH-600M4
User Manual
www.cctvcamerapros.com 888-849-2288

CCTV Camera Pros
Wireless Surveillance Camera Transmission System
www.cctvcamerapros.com
User Guide | 2
Contents
This user manual describes how to setup, install and operate the Shepherd-200M1 & 600M4. Please read it carefully and
observe all instructions and warnings before commencing installation of the product. Retain this manual with the original bill of
sale for future reference.
FCC Interference Statement ........................................................................................................ 4
FCC Radiation Exposure Statement.......................................................................................................5
Manufacturer's Disclaimer Statement ..................................................................................................... 5
Regulations.............................................................................................................................................6
1. System Introduction........................................................................................... 8
1.1 Features............................................................................................................................................9
1.2 Configuration...................................................................................................................................10
2. System Hardware ..............................................................................................11
2.1 Package Contents........................................................................................................................... 11
2.2 Hardware Connections ................................................................................................................... 12
2.3 LED Panel.......................................................................................................................................15

CCTV Camera Pros
Wireless Surveillance Camera Transmission System
www.cctvcamerapros.com
User Guide | 3
3. System Setup and Configuration.................................................................... 17
3.1 Installing MagicLink.........................................................................................................................17
3.2 Configuring the Shepherd- 200M1 & 600M4 Transmitter and Receiver .........................................21
Re-configuring the Shepherd-200M1 & 600M4 Transmitter.....................................................................................21
Configuration Default Settings..................................................................................................................................28
Re-configuring the Shepherd-200M1 & 600M4 Receiver......................................................................................... 36
4. System Hardware Assembly and Installation................................................ 37
4.1 System Location .............................................................................................................................37
4.2 System Assembly............................................................................................................................42
Before Commencing Installation ..............................................................................................................................42
Notice.......................................................................................................................................................................42
Pole Mounting..........................................................................................................................................................44
Wall Mounting ..........................................................................................................................................................45
4.3 Aligning the Transmitter and Receiver............................................................................................ 47
5. Trouble Shooting.............................................................................................. 50
6. Settings Record................................................................................................ 53

CCTV Camera Pros
Wireless Surveillance Camera Transmission System
www.cctvcamerapros.com
User Guide | 4
Statements
FCC Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
This 5.8GHz wireless video system has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
zReorient or relocate the receiving antenna.
zIncrease the separation between the equipment or device.
zConnect the equipment to an outlet other than the Receiver's.
zConsult a dealer or an experienced radio/TV technician for assistance.

CCTV Camera Pros
Wireless Surveillance Camera Transmission System
www.cctvcamerapros.com
User Guide | 5
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should
be installed and operated with minimum distance 23cm between the radiator and your body.
Manufacturer's Disclaimer Statement
The information given in this document was current when published. The company reserves the right to make changes to the
content of this document and/or the products associated with it at any time without obligation to notify any person or
organization. All information is subject to change without notice and does not represent a commitment on the part of vendor.
No warranty or representation, either expressed or implied, is made with respect to the quality, accuracy or fitness for any
particular purpose of this document. In no event will the manufacturer be liable for direct, indirect, special, incidental or
consequential damages arising out of the use or inability to use this product or documentation, even if advised of the
possibility of such damages. This document contains materials protected by copyright. All rights are reserved. No part of this
manual may be reproduced or transmitted in any form, by any means or for any purpose without express written consent of its
authors. Product names appearing in this document are mentioned for identification purposes only. All trademarks, product
names or brand names appearing in this document are registered property of their respective owners.

CCTV Camera Pros
Wireless Surveillance Camera Transmission System
www.cctvcamerapros.com
User Guide | 6
Regulations

CCTV Camera Pros
Wireless Surveillance Camera Transmission System
www.cctvcamerapros.com
User Guide | 7

CCTV Camera Pros
Wireless Surveillance Camera Transmission System
www.cctvcamerapros.com
User Guide | 8
1. System Introduction
CCTV Camera Pros Shepherd-200M1 & 600M4 represents an all new, high performance, digital based wireless surveillance
camera transmission system. Offering exceptional bandwidth and serial data transmission, the Shepherd-200M1 & 600M4
brings a wireless capability to all traditional fixed cameras and supplies built-in remote control of RS485 based full/half-duplex
PTZ dome cameras, providing an excellent yet cost effective solution for remote and hard-to-reach camera locations.
The Shepherd-200M1 & 600M4 uses the latest digital wireless OFDM modulation in the less crowded (and unlicensed) 5GHz
radio band, providing transmission rates that significantly reduce signal interference. Being fully-duplex, the Shepherd- 200M1
& 600M4 supplies a very stable wireless link, which combines with our image processing software to deliver hi-definition,
full-motion, ripple free video up to 4 miles (SH-600M4) or 1 mile (SH-200M1) with direct line-of-sight. The Shepherd-200M1 &
600M4 also offers considerably improved data security via eitherAES or RC4 key encryption.
The Shepherd-200M1 & 600M4 has been designed for ease-of-use and flexibility. System set-up and configuration are quick
and easy tasks via our MagicLink software, which allows for the selection of personalized encryption keys, the establishment of
the PTZ interface and a choice of transmission ranges for improved image quality. Where transmission of over 10 kilometers is
required or the signal path needs to change direction, two or more Shepherd-200M1 & 600M4s can be connected in series
using the Repeater Mode.
Overall, the Shepherd-200M1 & 600M4 provides a versatile, all-in-one wireless transmission solution for CCTV and traffic
surveillance needs, offering superb performance in all environments and weather conditions, and providing integrators and
installers with a system that is easy to set-up, simple to install and straight-forward to operate, while still offering time and
money saving flexibility.

CCTV Camera Pros
Wireless Surveillance Camera Transmission System
www.cctvcamerapros.com
User Guide | 9
1.1 Features
zA fully integrated all-in-one 5.8GHz wireless CCTV solution
zWireless transmission for real time video up to 10 Km
z5.8GHz OFDM for reduced interference
zData Rates of up to 54 Mbps
zFull Duplex provides a stable wireless link
zDigital Image Processing cuts out signal ripple and snow
zAdvanced security provided by either AES or RC4 key encryption
zProprietary serial data transmission for RS485 Full-Duplex & Half-Duplex PTZ control
zMagicLink software for system configuration
zUser-selectable transmission power and distance
zSupports NTSC/PAL (720x480 resolution at 30 fps)
zNo signal interference between cameras
zEasy installation and mounting
zRugged, all-weather IP67 enclosure
zDigital Ethernet output with connection SDK option

CCTV Camera Pros
Wireless Surveillance Camera Transmission System
www.cctvcamerapros.com
User Guide | 10
1.2 Configuration
Figure 1a A standard wireless configuration using the Shepherd-600M4.

CCTV Camera Pros
Wireless Surveillance Camera Transmission System
www.cctvcamerapros.com
User Guide | 11
2. System Hardware
2.1 Shepherd-200M1 & 600M4 Package Contents
Model Number Content Quantity
WA5800-DTX Transmitter with dBi panel antenna X 1
WA5800-RTX Receiver with dBi panel antenna X 1
MK-SH23 Mounting Kit for Pole/Wall mount X 2
CD-SH23 CD : MagicLinkSW / User manual X 1
PS-012V1A-01 Power Adapter X 2
CA-SH23 Data Cable Unit X 2
Ml-SH23 User Manual X 1
PS-ADAPTER Adapter Wire X 2
NOTE: If any of the above items are damaged or missing,
do not install or operate this product. Please contact your
dealer immediately.

CCTV Camera Pros
Wireless Surveillance Camera Transmission System
www.cctvcamerapros.com
User Guide | 12
2.2 Hardware Connections
Figure 2a Data cable connections

CCTV Camera Pros
Wireless Surveillance Camera Transmission System
www.cctvcamerapros.com
User Guide | 13
(1) Power Input (black cable)
zConnects to 12 V dc / 1AFemale power connector
(2) Video Cable (BNC-Female) (blue cable, silver head)
zDesigned to mate with standard BNC Female connector on camera. This input accepts 75ohm video in both NTSC
and PAL formats
(3) & (4) Audio Cables (Female)- Right (red head) & Left (white head)
zDesigned to mate with standard RCAFemale “Lineout” audio source connectors on camera. Each input accepts 1
Vpp audio input and is terminated with 600ohm unbalanced configuration
(5a) RS485 Full Duplex/Half Duplex Twisted-pair cable (T+) (Red cable)
zConnects to T+ hole on PTZ Full Duplex system camera
zConnects to T+ hole on PTZ Half Duplex system camera
(5b) RS485 Full Duplex/Half Duplex Twisted-pair cable (T-) (Red-White cable)
zConnects to T- hole on PTZ Full Duplex system camera
zConnects to T- hole on PTZ Half Duplex system camera
(5c) RS485 Full Duplex Twisted-pair cable (R+) (Yellow cable)
zConnects to R+ hole of PTZ Full Duplex system camera

CCTV Camera Pros
Wireless Surveillance Camera Transmission System
www.cctvcamerapros.com
User Guide | 14
(5d) RS485 Full Duplex Twisted-pair cable (R-) (Yellow-Black cable)
zConnects to R- hole of PTZ Full Duplex system camera
(6) Waterproof Ethernet RJ45 Jack
zConnects to PC Via Ethernet cable for configuring the Transmitter and Receiver using MagicLink software
(7) Waterproof D-sub connector
zIt’s waterproof rubber O-ringed head of data cable unit
(8) Video Cable (BNC-Female) (blue cable, silver head)
zDesigned to mate with standard BNC Female connector on TV. This input accepts 75ohm video in both NTSC and
PAL formats
(9) & (10) Audio Cables (Female) - Right (red head) & Left (white head)
zDesigned to mate with standard RCAFemale “Line In” audio source connectors on TV. Each input accepts 1 Vpp
audio input and is terminated with 600ohm unbalanced configuration
(11a) RS485 Full Duplex Twisted-pair cable (T+) (Red cable)
zConnects to T+ hole of PTZ Full Duplex control Keyboard
(11b) RS485 Full Duplex Twisted-pair cable (T-) ((Red-White cable)
zConnects to T- hole of PTZ Full Duplex control Keyboard

CCTV Camera Pros
Wireless Surveillance Camera Transmission System
www.cctvcamerapros.com
User Guide | 15
(11c) RS485 Full Duplex/Half Duplex Twisted-pair cable (R+) (Yellow cable)
zConnects to R+ hole of PTZ Full Duplex control Keyboard
zConnects to R+ hole of PTZ Half Duplex control Keyboard
(11d) RS485 Full Duplex/Half Duplex Twisted-pair cable (R-) (Yellow-Black cable)
zConnects to R- hole of PTZ Full Duplex control Keyboard
zConnects to R- hole of PTZ Half Duplex control Keyboard
2.3 LED Panel
Figure 2b

CCTV Camera Pros
Wireless Surveillance Camera Transmission System
www.cctvcamerapros.com
User Guide | 16
No. LED Color Status Description
1 Power Green ON Unit power on
OFF Unit power off
2 Wireless Green ON Strength 1: The Transmitter’s signal is successfully being received by the
Receiver (minimum strength)
OFF No connection
3 Wireless Green ON Strength 2: The Transmitter’s signal is successfully being received
OFF No connection
4 Wireless Green ON Strength 3: The Transmitter’s signal is successfully being received
OFF No connection
5 Wireless Green ON Strength 4: The Transmitter’s signal is successfully being received
OFF No connection
6 Wireless Green ON Strength 5: The Transmitter’s signal is successfully being received by the
Receiver (maximum strength)
OFF No connection
Wireless Strength 1: only LED 2 on (minimum)
Wireless Strength 2: LED 2, 3 on
Wireless Strength 3: LED 2, 3, 4 on
Wireless Strength 4: LED 2, 3, 4, 5 on
Wireless Strength 5: LED 2, 3, 4, 5 ,6 on (maximum)

CCTV Camera Pros
Wireless Surveillance Camera Transmission System
www.cctvcamerapros.com
User Guide | 17
3. System Setup and Configuration
The Shepherd-200M1 & 600M4 operates as an independent system within an integrated security system and does not need
to cooperate with other network systems. Therefore, if all the Transmitter and Receiver default settings are to be used (for
default settings, see Configuration Settings on page 30), the system can be installed as a simple plug-and-play solution.
However, we recommend that for security reasons, every Shepherd- 200M1 & 600M4 system is configured with its own
unique security settings (using the MagicLink software), and, if 2 or more Shepherd-200M1 & 600M4 systems are used in a
single area, it is vital that each be configured with its own Data Encrypt Key and Connection ID.
To re-configure any of the default settings on the Shepherd-200M1 & 600M4, first install the MagicLink software onto a
Windows-based PC or Notebook, then use MagicLink to change the configuration settings of both the Transmitter and
Receiver.
3.1 Installing MagicLink
MagicLink software allows users to re-configure the Shepherd-200M1 & 600M4 via any Windows-based PC or Notebook. This
section describes how to install MagicLink to your PC.
1. Insert the MagicLink Installation CD-ROM into your computer's CD-ROM drive. Run the SETUP.EXE program from the
CD-ROM. The following window will appear:

CCTV Camera Pros
Wireless Surveillance Camera Transmission System
www.cctvcamerapros.com
User Guide | 18
Figure 3a
zThe screen will show the default destination for the MagicLink software chosen by your computer's utility. If you want
to install MagicLink to another location, click the Browse button and select an alternative destination.
zClick Next when you are ready to continue. The setup program will begin to install the programs into the destination
folder.

CCTV Camera Pros
Wireless Surveillance Camera Transmission System
www.cctvcamerapros.com
User Guide | 19
2. When MagicLink has been successfully installed, the following window will appear:
Figure 3b
zClick Finish to complete the installation.

CCTV Camera Pros
Wireless Surveillance Camera Transmission System
www.cctvcamerapros.com
User Guide | 20
NOTE: To remove MagicLink from your computer, find and open the MagicLink
folder in your desktop, select Uninstall, and follow the on-screen instructions.