Important Notes 1.0
Eye protection must be worn.
Breathing protection must be worn.
Use at adistance of at least 10m from other people.
Conforms to relevant standards for electromagnetic compatibility.
Safety instructions
To use this tool properly,you must observe the safety limitations,the assembly instructions and the operating instructions
to be found in this Manual.All persons who use and service this machine must be acquainted with this Manual and must
be informed about it'spotential hazards.Children and infirm people must not use this tool.Children should be supervised
at all times if they are in the area in which the tool is being used.It is also imperative that you observe the accident
prevention regulations in force in your area.The same applies for general rules of occupational health and safety.
The manufacturer shall not be liable for any changes made to the tool nor for any damage resulting from such
changes.
Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors.The following hazards may
arise in connection with the tool'sconstruction and design:
Damage from flying debris.
Damage to eyes if effective safety glasses or shield are not worm.
Damage to ears if effective ear defenders are not worn.
Injury or illness caused by inhalation of dust and debris if breathing protection is not sufficient.
Always remove the battery from the tool before making any adjustments or performing maintenance.
Store tools safely.When not in use,tools should be stored in adry place inaccessible to children.
Do not force the tool.The tool will do the job better and safer working at the rate for which it was designed.
Use the correct tool for the job.Do not force small tools or attachments to do the job best handled by aheavier duty tool.
Never use atool for apurpose other than that for which it was intended.
Dress appropriately. Do not wear loose clothing or jewellery.They can be caught in moving parts.
Rubber gloves and non‑slip footwear are recommended while working outdoors.If you have long hair,wear aprotective
hair covering.
Use safety accessories.Safety glasses and ear protection should always be worn.
Do not overreach.Keep your footing secure and balanced at all times.
Look after your tools.Keep tools clean and sharp for better and safer performance.Follow the instructions regarding
lubrication and accessory changes.Keep tool handles dry,clean and free from oil and grease.
Disable idle tools.Remove the battery from the tool before servicing and when the tool is not in use.
Avoid unintentional starting.Make sure that the switches are in the OFF position before attaching the battery.
Important Notes 1.0
Stay alert Watch what you are doing,use common sense.Do not operate apower tool when you are tired or
distracted.
Before using atool,check that there are no damaged parts.If apart is slightly damaged,carefully determine it will
operate properly and perform its intended function. Check for alignment of moving parts,binding of moving parts,
breakage of parts,proper mounting and any other conditions that may affect the operation of the tool.Aguard or other
part that is damaged should be properly repaired or replaced by an authorized service facility,unless otherwise indicated in
this Instruction Manual.
Defective switches must be replaced by an authorised service facility. Do not use atool if the switch does not turn the
tool on and off correctly.
Guard against electric shock. Prevent contact with grounded objects such as water pipes.
Use only approved parts. When servicing,use only identical replacement parts. Use an authorised service facility to fit
replacement parts.
Do not let tool run unattended.Always wait until your power tool has come to acomplete stop and remove the battery
before leaving it.
Damaged batteries must be disposed of immediately. Liquids contained within can be extremely harmful.
WARNING.The use of an accessory or attachment,other than those recommended in this Instruction Manual,may
present arisk of personal injury.
The tool must be used only for its prescribed purpose.Any use other than those mentioned in this Manual will be
considered acase of misuse.The user and not the manufacturer shall be liable for any damage or injury resulting from
such cases of misuse.
Additional safety rules for blowers
Never point the blower in the general direction of any person, animal or delicate object as debris may be flung by the air stream.
Do not use the blower in the rain or in a damp area.
Keep hands and fingers well away from the outlets, air stream and moving parts.
Wear work gloves,eye, ear and breathing protection,solid shoes and suitable clothing while using this blower.
Always grasp both handles when operating the unit, only operate the machine in its intended orientation.
Remove the battery when you have finished blowing,before cleaning or if you have been interrupted.
This blower has been designed to clear light debris and leaves from hard surfaces not for clearing grassed areas.
Do not attempt to free debris or adjust the blower and it’s accessories before first switching off the machine and removing the
battery.
Check the area to be cleared for stones and anything that may be flung by the tool. Remove wire and string as it may damage the
blower.
Do not block the air outlets, this may damage the tool and cause injury.
Never use the machine without the safety devices properly fitted and undamaged
WARNING, the guards are for the safety of the operator and bystanders, never remove them while operating the machine.
Never touch or go near the blowing area while the motor is still turning, the tool may take a few seconds to slow down after the
trigger is released.
Only use battery as supplied or identical replacements designed specifically for this tool.
Only blow if lighting levels are adequate.
Do not activate the tool if there is debris in the vents or otherwise obstructing operation.
Release trigger when moving between work areas, gravel paths can create flying debris danger.
If the machine appears to have any fault or makes any unusual sounds please consult the manual a service centre or your retailer.
If you are interrupted while operating the trimmer,complete the process and switch off before looking up.
Never allow untrained users or children to use the blower.
Wear goggles,Wear ear protections, Wear breathing protection,
Wear work boots, Wear protective clothing.
Description of symbols
The rating plate on your tool may show symbols.
These represent important information about the product or instructions on its use.
Keep Dry Flying
Debris
Wear
Appropriate
Clothing
Keep
Bystanders
Away
Protect
Eyes, Ears,
Lungs
Read
Instructions
General
Hazard
