Cello C20230FT2-LED User manual

20” LED TV
with DVD
C20230FT2-LED

Contents
Unpacking the TV / Accessory’s
Installing / Removing the Base Stand
Front / Right Side View and Controls
Rear View and Sockets
OSD Menu
1
Installing Batteries in the Remote Control
. Picture Setting
2. Sound Setting
3. Channel Setting
4. Lock Setting
Maintenance
1
2
3
4
14-20
31noitarepOcisaB
14-15
16
17-19
20-21
22
24
26
27
27
26
22
32-33
spiTdnastniH
34sedoMyalpsiD
35snoitacificepS
36sgninraWytefaS
Remote Control
Making Video and Audio Connections
5-6
7
Remote Control Operation Range 7
8
Connecting an AV Device with an HDMI Cable 8
Connecting a Computer with a VGA Cable 9
Connecting an AV Device with a Component (YPbPr) cable 9
Connecting an AV Device with a SCART Cable 10
Connecting an AV Device with Composite Cable
Connecting a Digital Audio Receiver
10
11
Connecting Headphones 11
Turning the TV on for the First Time 12-13
5. Time Setting
Connecting a USB Storage Device
Viewing Photos
Listening to Music
Watching Movies
Viewing Texts
6. Option Setting 23
DVD 28-31

your new 20" HD LED TV.
Batteries
1
TV set Stand Screws(M4 x 10 3PCS) Adapter

The parts
Installation
2
Place the TV face down on a soft and flat surface (blanket, foam, cloth, etc.) to prevent any damage to the TV.
TV set
Stand
Screws(supplied)
2 x ST4 x 16
100 x 100
1.Put the stand to the TV set
as shown below.
(ST4x16 2 PCS)
2.Attach the stand with the supplied screws.

DTV, ATV, AV, YPBPR, VGA, HDMI, MEDIA,DVD

POWER
AV Connect an external device to the composite VIDEO(Y) and AUDIO (L / R) out jacks
found on most video equipment.
L R HDMI VGA
Video
MI NI YP bPr
Common Int erfac e
PC AUDI O USB
4

Remote Control 5

Remote Control
6

7


L R HDMI VGA TV Aerial VIDEO
Power

9
L R HDMI VGA MINI YPbPr
Common Interface
PC AUDIO
L R HDMIVIDEO
Power
MINI YPbPr
Common Interface
PC AUDIO
Digital
Audio out


L R HDMI VGAVIDEO
Power

11Mini YPbPr Mini AV

5. If this is the first time you are turning on the TV and there are no programs in the TV memory, the Quick Startmenu
will appear on the screen. There are 4 setups as follow:
12
FirstTime InstallationOSD Lang uageCountryEnglishUKMENUReturnOKOKFirstTime InstallationAuto Standby4HMENUReturnOKOKFirstTime InstallationTv ConnectionTuneTypeDTVDTVMENUReturnOKOKFirstTime InstallationPlease ensure the aerial cable is plugged intothe TV. Now choose "OK", the TV will tune all available channels. CancelOKVideo
Audio
R in
Audio
L in

20
DTV, ATV, AV, SCART, YPBPR, HDMI1, HDMI2, HDMI3, PC, Media.
Mut e Mute
LOCK
Radio
/
13
Input Source
DTV
Cable
ATV
AV
SCART
YPbPr
PC
HDMI
USB
OK OK

14PICTURE
Picture Mode Standard
Contrast 50
Brightness 50
Saturation 50
Tint 50
Sharpness 50
Color Temperature Normal
Aspect Ratio Auto
Noise Reduction Middle
Enter OK Enter Select Exit Exit
Saturation Press the buttons to increase or decreases the saturation.
Auto

15Menu

16SOUND
Sound Mode Standard
120Hz 50
500Hz 50
1.5KHz 50
5KHz 50
10KHz 50
Balance 0
Auto Volume Off
Surround Sound Off
Enter OK Enter Select Exit Exit
SPDIF Mode Off
Sports Menu
SPDIF Mode
Auto Volume This feature automatically adjusts the audio level when the TV is turned on.This function is activated by selecting”ON”.
Surround Sound Turn on/off the surround sound function by selecting “On” or “Off”.

1. Press the Menu button and then press the buttons to select the
CHANNEL menu.
2. Press the OK buttons
and then p
and then press the to select
the following channel options ress the OK button.
Allows you to set up a variety of channel options. 17CHANNEL
Auto Tuning
DVB-T Manual Tuing
ATV Manual Tuing
Programme Edit
Signal Information
Enter OK Enter Select Exit Exit
▲▼
CI Information
Software Update(USB)
Auto Tuning
1.Press the buttons to Auto Tuning then press the
OK button to confirm.
2.In the Auto Tuing menu there are 2 options for you to
selet from:Tune Type and Country.
3.Press the Menu button to return back to the main menu.
4.Press the Exit button to exit the menu.

18DVB-T Mannual Tuning
1.Select DVB-T Mannual Tuning,press the OK button to confirm.
Storage To 1 Press the buttons to change the numbered location of
the found channel.
ATV Mannual Tuning
ATV Mannual Tuning