Centech 57209 Assembly instructions

!"#$%&'!()*+&,&+-'
.))&/.#,&+-'#0,&$'
*1$!"#2&3
04556'789:;7<8';=>87'
8;9:'?4@ABC>;7>3
04556'789:;7<8'@DE>:56'>D'
8EC478'5DE<'F;>>876'5G=83
HGCG>'D47'I8FCG>8';>J':>>AJKKIII3:;7FD7=78G<:>39D@
&@;G5'D47'>89:EG9;5'C4AAD7>';>J'A7DL49>C4AAD7>M:;7FD7=78G<:>39D@
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. 20g
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright© 2020 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly an d se rv ic e may n ot b e in cl uded.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.

Page 2 0D7'>89:EG9;5'N48C>GDECO'A58;C8'9;55'PBQQQBQRRBSTUT Item 57209
2#0&,- (*&$#,.(V )#.V,&V#V!&2&,1*
,;F58'D='!DE>8E>C
Safety ......................................................... 2
Specifications ............................................. 5
Setup .......................................................... 6
Operation .................................................... 8
Maintenance ............................................... 9
Parts List and Diagram .............................. 10
Warranty .................................................... 12
W#$V.V%'2-)X(+2'#V/'/&0.V.,.(V2
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow
this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
HVolts
YAlternating Current
#Amperes
!!# Cold Cranking Amps
$! Reserve Capacity
#: Ampere-hours
WARNING marking
concerning Risk of Eye Injury.
Wear ANSI-approved
splash-resistant safety goggles.
Read the manual before
setup and/or use.
WARNING marking
concerning Risk of Fire.
Follow connection procedure.

Page 30D7'>89:EG9;5'N48C>GDECO'A58;C8'9;55'PBQQQBQRRBSTUTItem 57209
2#0&,-(*&$#,.(V)#.V,&V#V!& 2&,1*
2;=8>6'W;7EGE<C';EL'*789;4>GDEC
%8E87;5'2;=8>6'W;7EGE<C
$8;L';55'C;=8>6'I;7EGE<C';EL'GEC>749>GDEC3''
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
2;Z8';55'I;7EGE<C';EL'GEC>749>GDEC'=D7'=4>478'78=878E983
W#$V.V%[''\'$.2]'(0'&^*+(2.H&'%#2&23
Working in vicinity of a lead-acid battery is
dangerous. Batteries generate explosive gases
during normal battery operation. For this reason,
it is of utmost importance that you follow the
instructions each time you use the Jump Starter.
To reduce risk of battery explosion, follow these
instructions and those published by battery
manufacturer and manufacturer of any equipment you
intend to use in vicinity of battery. Review cautionary
marking on these products and on engine.
WD7_'#78;'2;=8>6
1. ]88A'ID7_';78;'958;E';EL'I855'5G>3''
Cluttered or dark areas invite accidents.
2. /D'ED>'DA87;>8'`4@A'2>;7>87'GE'8aA5DCGZ8'
;>@DCA:878CO'C49:';C'GE'>:8'A78C8E98'
D='=5;@@;F58'5GN4GLCO'<;C8C'D7'L4C>3
The Jump Starter can create sparks
which may ignite the dust or fumes.
3. ]88A'9:G5L78E';EL'F6C>;EL87C';I;6'
I:G58'DA87;>GE<'>:8'`4@A'2>;7>873
Distractions can cause you to lose control.
4. 2>D78'GL58'8N4GA@8E>3'Always lock up
tools and keep out of reach of children.
&589>7G9;5'2;=8>6
1. /D'ED>'L7DA';'@8>;5'>DD5'DE>D'F;>>8763'It
might spark or short-circuit battery or other
electrical part that may cause explosion.
2. /D'ED>'DA87;>8'G='`4@A'2>;7>87':;C'
7898GZ8L';'C:;7A'F5DIO'F88E'L7DAA8LO'
D7'D>:87IGC8'L;@;<8L'GE';E6'I;6b'
>;_8'G>'>D';'N4;5G=G8L'>89:EG9G;E3
3. /D'ED>'58;Z8 `4@A'2>;7>87'4E;>>8EL8L'
I:G58'CIG>9:8L'DE3 It could result
in fire and property damage.
4. /D'ED>'8aADC8'>D'7;GE'D7'I8>'9DELG>GDEC3
Water entering the Jump Starter will
increase the risk of electric shock.
5. /D'ED>'4C8';E'8a>8ECGDE'9D7L'IG>:'>:GC'G>8@3'
6. 1C8'D=';E';>>;9:@8E>'ED>'789D@@8EL8L'D7'
CD5L'F6'>:8'@;E4=;9>4787'@;6'78C45>'GE';'7GC_'
D='=G78O'8589>7G9'C:D9_O'D7'GE?476'>D'A87CDEC3
7. ,D'78L498'7GC_'D='L;@;<8'>D'8589>7G9'A54<'
;EL'9D7LO'A455'F6'A54<'7;>:87'>:;E'9D7L'
I:8E'LGC9DEE89>GE<'>:8'#L;A>873
8. /D'ED>'DA87;>8'IG>:'L;@;<8L'9D7L'D7'A54<3'
$8A5;98'>:8'9D7L'D7'A54<'G@@8LG;>8563
*87CDE;5'2;=8>6
1. ' W8;7'#V2.B;AA7DZ8L'CA5;C:B'
' 78CGC>;E>'C;=8>6'<D<<58C';EL':8;Z6B'
' L4>6'74FF87'ID7_'<5DZ8C''
' I:8E8Z87'9DEE89>GE<O''
' LGC9DEE89>GE<O'D7'ID7_GE<'
E8;7'F;>>8763''X;>>876';9GL'9;E'9;4C8'
A87@;E8E>'F5GELE8CC3''#ZDGL'>D49:GE<'
868C'I:G58'ID7_GE<'E8;7'F;>>8763
2. /D'ED>'4C8'`4@A'2>;7>87'I:G58'6D4';78'>G78L'
D7'4EL87'>:8'GE=548E98'D='L74<CO';59D:D5'
D7'@8LG9;>GDE3' A moment of inattention
while operating Jump Starter may
result in serious personal injury.
3. V&H&$'C@D_8'D7';55DI';'CA;7_'D7'=5;@8'
GE'ZG9GEG>6'D='F;>>876'D7'8E<GE83
4. .='F;>>876';9GL'9DE>;9>C'C_GE'D7'95D>:GE<O'
I;C:'G@@8LG;>856'IG>:'CD;A';EL'I;>873'
.=';9GL'8E>87C'868O'G@@8LG;>856'=5DDL'868'IG>:'
74EEGE<'9D5L'I;>87'=D7';>'58;C>'Pc'@GE4>8C'
;EL'<8>'@8LG9;5';>>8E>GDE'G@@8LG;>8563
5. $8@DZ8'A87CDE;5'@8>;5'G>8@C'C49:';C'7GE<CO'
F7;9858>CO'E89_5;98CO';EL'I;>9:8C'I:8E'ID7_GE<'
IG>:';'58;LB;9GL'F;>>8763 A lead-acid battery can
produce a short-circuit current high enough to weld
a ring or the like to metal, causing a severe burn.
6. People with pacemakers should consult their
physician(s) before use. Electromagnetic fields in
close proximity to heart pacemaker could cause
pacemaker interference or pacemaker failure.

Page 4 0D7'>89:EG9;5'N48C>GDECO'A58;C8'9;55'PBQQQBQRRBSTUT Item 57209
2#0&,- (*&$#,.(V )#.V,&V#V!&2&,1*
287ZG98
";Z8'6D47'`4@A'2>;7>87'C87ZG98L'F6';'N4;5G=G8L'78A;G7'A87CDE'4CGE<'DE56'GL8E>G9;5'78A5;98@8E>'A;7>C3'
This will ensure that the safety of the Jump Starter is maintained.
`4@A'2>;7>87'2;=8>6'W;7EGE<C
1. +8;LB;9GL'F;>>87G8C'<8E87;>8':6L7D<8E'<;C'I:8E'
9:;7<GE<3 Hydrogen gas is explosive. Only use
the Jump-Start system in a well-ventilated area.
2. `4@AB2>;7>GE<'#'H8:G958
a. Use the Jump Starter for jump-starting
a LEAD-ACID battery only.
b. For emergency use only. Do not use the Jump
Starter as a replacement for a vehicle battery.
c. Be sure area around battery is well ventilated
while battery is being jump-started.
d. NEVER jump-start a frozen battery.
e. Do not attempt to jump-start a vehicle with
a non-rechargeable or defective battery.
f. Study all battery manufacturer’s specific
precautions for jump-starting.
g. /('V(,',(1!"'*(2.,.H&'#V/'V&%#,.H&'
X#,,&$-'!+#)*2',(%&,"&$3
h. Unplug the Jump Starter from its Adapter
before connecting its cables to a battery.
i. Connect and disconnect battery cable
clamps only after setting any Jump-
Starter switches to OFF position.
j. Connect cables to proper polarities. Connect
black cable to negative body ground and
red cable to positive battery terminal.
k. Locate Jump Starter as far away from
battery as battery cables permit.
3. Maintain labels and nameplates on the Jump Starter.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
4. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by the
operator that common sense and caution are
factors which cannot be built into this product,
but must be supplied by the operator.
'2#H&',"&2&'.V2,$1!,.(V23

Page 50D7'>89:EG9;5'N48C>GDECO'A58;C8'9;55'PBQQQBQRRBSTUTItem 57209
2#0&,-(*&$#,.(V)#.V,&V#V!& 2&,1*
2A89G=G9;>GDEC
Input 120 VAC, 60Hz, 0.3A
Output 15VDC, 0.5A
USB 5VDC, 2.4A
Cold Cranking Amps 210A
Battery 12V, 9Ah, Sealed Lead-Acid
Battery Cables 25 1/2″ L, 6AWG

Page 6 0D7'>89:EG9;5'N48C>GDECO'A58;C8'9;55'PBQQQBQRRBSTUT Item 57209
2#0&,- (*&$#,.(V )#.V,&V#V!&2&,1*
28>4A'B'X8=D78'1C8J
' $8;L'>:8'&V,.$&'.)*($,#V,'2#0&,-'.V2,$1!,.(V2'C89>GDE';>'>:8'F8<GEEGE<'D='>:GC'
@;E4;5'GE954LGE<';55'>8a>'4EL87'C4F:8;LGE<C'>:878GE'F8=D78'C8>4A'D7'4C8'D='>:GC'A7DL49>3
VD>8J For additional information regarding the parts listed in the
following pages, refer to Parts List and Diagram on page 10.
04E9>GDEC
WD7_'+G<:>'
X4>>DE
WD7_
+G<:>
X;>>876'2>;>4C'
.ELG9;>D7'
+G<:>C
(EK(=='!5;@A'
2;=8>6'2IG>9:
Pdc'H#!'
!:;7<GE<'
.EA4>'
V8<;>GZ8'X;>>876
!;F58
*DCG>GZ8'X;>>876'
!;F58'
12X'*D7>
*DI87'
X4>>DE
$8Z87C8'*D5;7G>6'
W;7EGE<'+&/
!:;7<GE<'X;>>876'+&/ );GE>;GEGE<'X;>>876'+&/
0G<478'#

Page 70D7'>89:EG9;5'N48C>GDECO'A58;C8'9;55'PBQQQBQRRBSTUTItem 57209
2#0&,-(*&$#,.(V)#.V,&V#V!& 2&,1*
!:;7<GE<'>:8'`4@A'2>;7>87
W#$V.V%['',('*$&H&V,'2&$.(12'.V`1$-J''
#5I;6C'9:;7<8'DE';'EDEB=5;@@;F58'C47=;983
The Battery Status Indicator Lights show
the battery’s power level. Press the Power
Button ON to illuminate the lights.
a. Full and 75%: Green light(s)
indicate ready for use.
b. 50% Charged: Yellow and Red lights
indicate needs to be charged.
c. 25% Charged: Red light indicates
should be charged G@@8LG;>8563
Mostly charged
battery
Partially depleted
battery
Mostly depleted
battery
Fully charged battery
BATTERY STATUS
LOW HIGH
BATTERY STATUS
LOW HIGH
BATTERY STATUS
LOW HIGH
JUMP STARTER
BATTERY LEVEL
BATTERY STATUS
LOW HIGH
BATTERY STATUS
LOW HIGH
BATTERY STATUS
LOW HIGH
BATTERY STATUS
LOW HIGH
BATTERY STATUS
LOW HIGH
BATTERY STATUS
LOW HIGH
BATTERY STATUS
LOW HIGH
BATTERY STATUS
LOW HIGH
BATTERY STATUS
LOW HIGH
X;>>876'2>;>4C'.ELG9;>D7'+&/C
1. Turn the Clamp Switch on front of unit to
the OFF position and be sure nothing is
connected to the USB port. The Work Light
and Power Button should be OFF.
VD>8J Before initial use, completely
charge the Jump Starter.
VD>8J Do not operate any of the Jump Starter’s
functions while the unit is charging.
2. Connect the included Power Cord’s plug
to a grounded 120 VAC 60Hz outlet.
*DI87'
!D7L
Pdc'H#!'Rc"e'
(4>58>
3. Remove cover from 120VAC Charging Input
and connect the Power Cord’s socket to the
male plug on the side of the Jump Starter.
*DI87'
!D7L
Pdc'H#!'
!:;E<GE<'.EA4>
!DZ87
4. The Jump Starter’s front panel Charging Battery
LED will illuminate while the unit is charging.
5. The green Battery Status Indicators will
illuminate when the unit is fully charged. Also,
the Maintaining Battery LED will illuminate
until the power cord is disconnected.
#AA7DaG@;>8
#!'!:;7<8',G@8
Initial Charge:
Up to 12 hours
Recharge:
Up to 12 hours
!:;7<8',G@8
6. ,:8'`4@A'2>;7>87'@4C>'F8'4EA54<<8L'
I:8E'G>'GC'=4556'9:;7<8L3
V(,&J 0#.+1$&',('$&!"#$%&'`4@A'
2>;7>87'W.++'H(./'W#$$#V,-3
7. Recharge:
a. When the Battery Status LEDs
indicate 50% or less.
b. After each Jump-Start.
c. Once a month.
/( V(,'&^!&&/')#^.)1)'!"#$%.V%',.)&3

Page 8 0D7'>89:EG9;5'N48C>GDECO'A58;C8'9;55'PBQQQBQRRBSTUT Item 57209
2#0&,- (*&$#,.(V )#.V,&V#V!&2&,1*
(A87;>GE<'.EC>749>GDEC
1CGE<'>:8'WD7_'+G<:>
1. To turn the Work Light on, press the Power Button
ON and then press the Work Light button.
2. To turn the Work Light off, press
the Work Light button again.
3. If finished using the Jump Starter,
press the Power Button OFF.
`4@AB2>;7>GE<';'H8:G958
VD>8J Read the vehicle owner’s manual pertaining
to jump-starting prior to using the Jump Starter.
1. Press the Power Button ON and check the Battery
Status Indicator Lights to verify that the Jump
Starter is fully charged. Recharge as needed,
following the instructions in the f!:;7<GE<'
>:8'`4@A'2>;7>87g'section on page 7.
2. Turn off the vehicle ignition switch and all
accessories (lights, radio, climate control, etc.).
3. Turn Clamp Switch on the Jump Starter
to the OFF position. You may leave
the Work Light on if needed.
W#$V.V%['',('*$&H&V,'2&$.(12'.V`1$-J
/('V(,',(1!"'*(2.,.H&'#V/'V&%#,.H&'
X#,,&$-'!+#)*2',(%&,"&$3
3. Connect the red Positive Battery Cable to
vehicle’s positive battery terminal. Connect
the black Negative Battery Cable to a non-
moving metal part of the vehicle.
W#$V.V%[ ',('*$&H&V,'2&$.(12'.V`1$-J''
/('V(,'!(VV&!,',(',"&'V&%#,.H&'
,&$).V#+'(0',"&'X#,,&$-3
W#$V.V%['',('*$&H&V,'2&$.(12'.V`1$-J''/('
V(,',1$V'!+#)*'2W.,!"',('(V'*(2.,.(V'
.0',"&'$&H&$2&'*(+#$.,-'W#$V.V%'+&/'
.2'(V'#V/',"&'#+#$)'X1hh&$'.2'"&#$/3''
2,(*'#V/'!($$&!,',"&'*$(X+&)3
4. When the correct connection has been made,
turn the Clamp Switch to the ON position.
5. W#.,'0.H&').V1,&2O then start the
vehicle. If the vehicle does not start, wait an
additional 3 minutes before trying again.
V(,.!&J'',"&'H&".!+&'W.++'V(,'2,#$,'.0'
-(1'/('V(,'W#.,'#,'+&#2,'S').V1,&23
6. After the vehicle is started, turn the
Clamp Switch to the OFF position. Remove
the black Negative Battery Cable first, and
then the red Positive Battery Cable.
$4EEGE<K!:;7<GE<'12X'/8ZG98C
1. Press the Power Button ON and check the Battery
Status Indicator Lights to verify that the Jump
Starter is fully charged. Recharge as needed,
following the instructions in the “!:;7<GE<'>:8'
`4@A'2>;7>87” section on page page 7.
2. Plug the device into the USB Port.
3. When finished, unplug the device from the USB Port.
4. If finished using the Jump Starter,
press the Power Button OFF.

Page 90D7'>89:EG9;5'N48C>GDECO'A58;C8'9;55'PBQQQBQRRBSTUTItem 57209
2#0&,-(*&$#,.(V)#.V,&V#V!& 2&,1*
);GE>8E;E98';EL'287ZG9GE<
' *7D98L478C'ED>'CA89G=G9;556'8aA5;GE8L'GE'>:GC'@;E4;5'@4C>'
F8'A87=D7@8L'DE56'F6';'N4;5G=G8L'>89:EG9G;E3
,('*$&H&V,'2&$.(12'.V`1$-J''1EA54<'>:8'`4@A'2>;7>87O'>47E'>:8'*DI87'X4>>DE'D==';EL';55DI'`4@A'2>;7>87'
>D'9DD5'9D@A58>856'F8=D78'A87=D7@GE<';E6'GECA89>GDEO'@;GE>8E;E98O'D7'958;EGE<'A7D98L478C3
1. X&0($&'&#!"'12&O inspect the general
condition of the Jump Starter. Check for:
• loose hardware,
• cracked or broken parts,
• damaged electrical wiring or cable insulation, and
• any other condition that may
affect its safe operation.
2. Keep unit clean and clamps free
of dirt, debris, or grease.
3. For longer working life, protect Jump
Starter from sunlight and moisture.
4. #0,&$'12&O wipe external surfaces of
the Jump Starter with clean cloth.
5. !(V,#.V2'V(VB2*.++#X+&O'2&#+&/'
+&#/B#!./'X#,,&$-3''X#,,&$-')12,'X&'
$&!-!+&/'($'/.2*(2&/'(0'*$(*&$+-3
6. ,:8'F;>>876'C:D45L'DE56'F8'78A5;98L'
F6';'N4;5G=G8L'>89:EG9G;E3

Page 10 0D7'>89:EG9;5'N48C>GDECO'A58;C8'9;55'PBQQQBQRRBSTUT Item 57209
2#0&,- (*&$#,.(V )#.V,&V#V!&2&,1*
*;7>C'+GC>';EL'/G;<7;@
*+&#2&'$&#/',"&'0(++(W.V%'!#$&01++-
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM
IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS
QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE
ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
*;7>C'+GC>
$89D7L'*7DL49>iC'287G;5'V4@F87'"878J'
VD>8J If product has no serial number, record month and year of purchase instead.
VD>8J Some parts are listed and shown for illustration purposes only, and are not
available individually as replacement parts. Internal parts are not user-serviceable
and are not available. Specify UPC 792363572095 when ordering parts.
*;7> /8C97GA>GDE j>6
1 Front Housing 1
2 Clamp Switch Cover 1
3 On/Off Clamp Safety Switch 1
4 Control Panel 1
5 USB Port 1
6 Work Light Switch 1
9 Automatic Recovery Fuse 1
10 Handle 1
11 Back Housing 1
12 Red Positive Clamp 1
13 Black Negative Clamp 1
14 Clamp Handle 2
15 Housing Rear Foot 2
*;7> /8C97GA>GDE j>6
16 Side Door 2
17 Battery Bracket 1
18 Battery, 12V, 9Ah, Lead Acid 1
19 120 VAC Charging Input 1
20 Vent 2
21 Adapter, 15V 500mA 1
22 120 VAC Charging Input Cover
(not shown) 1
23 Battery Status Indicator Cover 1
24 LED Indicator Panel 1
25 Housing Front Foot 2
26 Power Button 1
34 Power Cord 1

Page 110D7'>89:EG9;5'N48C>GDECO'A58;C8'9;55'PBQQQBQRRBSTUTItem 57209
2#0&,-(*&$#,.(V)#.V,&V#V!& 2&,1*
#CC8@F56'/G;<7;@
1
2
3
4
5
6
9
10
11
12
13
14
16
17
18
19
20
21
23
24
25
26
15
34
16

dRSkP'#<D47;'$D;L''l''!;5;F;C;CO'!#'UPmcd''l''PBQQQBQRRBSTUT
+G@G>8L'Uc'/;6'W;77;E>6
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards,
and warrants to the original purchaser that this product is free from defects in materials and workmanship for the
period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly,
to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper
installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries
to persons or property, or for incidental, contingent, special or consequential damages arising from the use of
our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges
prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.
If our inspection verifies the defect, we will either repair or replace the product at our election or we may
elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will
return repaired products at our expense, but if we determine there is no defect, or that the defect resulted
from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.