Centrios QLM0100410 User manual

* The Bluetooth trademarks are owned by Bluetooth SIG, Inc. USA.
Centrios Bluetooth Neckband Stereo Headphones
Centrios Bluetooth Neckband Stereo Headphones

2. Do the same thing to the audio dongle device. Ensure the audio
dongle is off, and then press and hold dongle on button until LED flash
rapidly to enter pairing mode.
1. Ensure Bluetooth headphones are off, and then press and hold
headphones on button to switch on the headphones, continue to hold
the button until LED flash rapidly, which means the headphones are
now in pairing mode.

3. Let the Bluetooth headphones and the audio dongle search and pair,
when the units are paired, the LED will flash steadily, and acoustic data
transfer starts.
4. Plug the audio adapter into the CD or MP3 player
5. The blue LED lights on the audio adapter and the headphones will
flash continuously while in operation. This indicates the pairing is
sucessful.
6. To pair the adapter with other headphones, just repeat the pairing
procedure described in step 1 through 4 above.

P. 7
US - FCC Statement
Canada - Industry Canada Statement
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause undesired operation
of the device.
NOTE: The changes or modifications not expressly approved 
by the party responsible for compliance could void the user’s 
authority to operate the equipment.

To comply with the FCC RF exposure compliance 
requirements, this device and its antenna must not be 
co-located or operating to conjunction with any other antenna 
or transmitter.

P. 8