CenturionPro BUCKER User manual

G
o
o
d
M
a
n
u
f
a
c
t
u
r
i
n
g
P
r
a
c
t
i
c
e
C
o
m
p
l
i
a
n
t
OWNERS MANUAL
BUCKER CONVEYOR

2cprosolutions.com1 855 535 0558
TABLE OF CONTENTS
TABLE OF CONTENTS
WARRANTY
SAFETY
COMPONENT OVERVIEW - BUCKER CONVEYOR
VARIABLE SPEED CONTROL
ASSEMBLY
BELT ADJUSTMENT
CLEANING
SPECIFICATIONS
CONVEYOR POSITIONING
2
3
4
5
5
6
6
7
7
7
CONVEYOR - ADDITIONAL REQUIREMENTS
EXTENSION CORD
14 AWG (min AWG SIZE)
7.6m/25ft MAX LENGTH
CONVEYOR CONNECTIONS
CANADA, USA, MEXICO & JAPAN
CONNECTOR PLUG
REGULAR WALL OUTLET
CONVEYOR CONNECTIONS
EUROPE, SOUTH AMERICA & ASIA
CONNECTOR PLUG
REGULAR WALL OUTLET
SIZE TOOL ITEM
3/16" T-Handle Allen Wrench
9/16" Wrench
3/4" Wrench
TOOL REQUIREMENTS
ELECTRICAL POWER SUPPLY SET-UP
TEST YOUR ELECTRICAL CURRENT TO MAKE SURE IT IS PRODUCING POWER. WE RECOMMEND HAVING A
CERTIFIED ELECTRICIAN SET UP THE PROPER POWER SUPPLY. THIS WILL ENSURE YOUR POWER SOURCE IS
SUPPLYING THE CORRECT ELECTRICITY. IF YOU HAVE NOT DONE THIS, HAVE A CERTIFIED ELECTRICIAN COME
AND TEST YOUR ELECTRICAL CURRENT.

For more information or to watch our video tutorials visit cprosolutions.com
OWNERS MANUAL
BUCKER CONVEYOR
3
OWNERS MANUAL
THE TABLETOP
LIABILITIES
LEGALITIES
CenturionPro machines are intended for use on legal aromatic herbs and hops. Please check all municipal, provincial/state and federal laws
and regulations before using these machines. CenturionPro Solutions does not promote or condone the use of these products in any way that
may be deemed illegal. Allow only persons who understand this disclaimer to operate the machines.
The manufacturer assumes no risk and shall be subject to no liability for damages or loss resulting from the specic use or application made
of the product. In no event will the manufacturer be liable for any special, incidental or consequential damages (including loss of use, loss
of prot and claims of third parties) however caused - whether by negligence of the manufacturer or otherwise. If you have any questions
regarding your warranty rights and responsibilities, please contact the manufacturer.
YOU MUST REGISTER YOUR CONVEYOR WITHIN 30 DAYS OF YOUR PURCHASE
WARRANTY
YOU HAVE JUST MADE A SMART DECISION BY PURCHASING A CENTURIONPRO MACHINE. FAILURE TO REGISTER YOUR MACHINE WITHIN 30 DAYS
OF PURCHASE WILL VOID YOUR 1 YEAR WARRANTY. PROTECT YOUR INVESTMENT. THIS PROCESS WILL ONLY TAKE 3 MINUTES TO COMPLETE.
!! IMPORTANT !!
IF WARRANTY REPAIR IS REQUIRED, PLEASE CONTACT THE MANUFACTURER AT 1-855-535-0558 OR
[email protected] AND PROVIDE THE FOLLOWING INFORMATION:
1. Model and serial number - Located on outside of motor
2. Proof of purchase date
3. A copy of the original Warranty Registration Card or Online Submission
4. Details of the defect or problem (include photos and videos)
YOU MAY BE DENIED WARRANTY COVERAGE IF YOUR MACHINE HAS FAILED
DUE TO ANY OF THE FOLLOWING:
Product abuse Normal wear
Product neglect Accidental damage
Improper maintenance Unapproved modications
Improper electrical connection
cprosolutions.com/warranty
REGISTER NOW!
CenturionPro Solutions (the manufacturer) will repair or replace, without charge, any
parts proven defective in material or workmanship for a period of 1 year on your
conveyor. Regular wear and tear of consumable parts, such as the belt and caster
wheels, will not be covered under this warranty.
The warranty period will begin on the date the machine(s) is purchased by the initial
purchaser. Product or component warranty defects can be remedied at any authorized
service dealer, or directly at the manufacturer. Any service work performed, and deemed
valid due to a defective part, will be free of charge. CenturionPro Solutions reserves the
right to use any manufacturer-approved replacement part for the warranty repair.
The machine or defective part then must be returned to the manufacturer for analysis
or replacement at the cost of the owner. Parts deemed to be covered under the
warranty will be provided for free excluding shipping costs.
Do not return the machine to the place of purchase for repair or warranty claims, unless
you have been authorized by CenturionPro Solutions to do so. The place of purchase can
only sell replacement parts and will not repair any warranty issues, unless it is noted as
an authorized repair dealer and has been authorized to work on your machine.
WARRANTY TERMS AND CONDITIONS

4cprosolutions.com1 855 535 0558
PRE-OPERATION CHECK
For your safety, and to maximize the service life of your equipment, it is very important to take a few moments before you operate the to check its condition before each use. If you
happen to come across any issues, be sure to take care of them before you operate the Conveyor.
Improperly maintaining this Conveyor, or failing to correct a problem before operation, could cause a malfunction which could cause you to be seriously injured. Always perform a pre-op-
eration inspection before each use, and correct any problem.
Before beginning your pre-operation checks, be sure the Conveyor is on a level surface, the MOTOR SWITCH is in the OFF position, and all power cords are unplugged.
CHECK THE GENERAL CONDITION OF THE CONVEYOR
Clean the Conveyor. Look for signs of damage.
Check each control for proper operation.
Check parts for wear. Replace if necessary.
Check that all nuts and bolts are tightened appropriately.
IMPORTANT SAFETY INFORMATION
We cannot warn you of every conceivable hazard that can arise in performing maintenance. Only you can decide whether or not you should perform a given task. Always follow the proce-
dures and precautions in this owner’s manual. Other uses could result in injury to the operator or damage to the Conveyor and other property.
Safety Precautions
Make sure all motors are o and power cords are unplugged before you begin any cleaning, maintenance or repairs.
Read the instructions before you begin, and make sure you have the tools and skills required.
CLEAR OPERATION AREA
Before operating the Conveyor, carefully inspect the surrounding area and remove all hazards that could cause you to trip, slip, or fall into the Conveyor. Anything which can be grabbed by
the rotating Belt is a potential hazard to you and others. Look for hazards and remove them from the work area. Tie back loose clothing and long, loose hair. Remove any and all jewelry.
COVERS & GUARDS
Do not alter or remove Guards or Covers, they are designed to protect you from touching moving components. For your safety and the safety of others, keep all covers and guards in place
when the Conveyor is running.
TURN MOTOR OFF WHEN NOT OPERATING THE CONVEYOR
If you need to leave or step away from the Conveyor for any reason, always make sure to turn the motor o.
OPERATE ON FLAT SURFACE
Do not operate on slopes. To avoid overturning, only operate the Conveyor on at surfaces. Control the Conveyor carefully when transporting it across uneven ground or slopes. Do not
push the Conveyor down or across steep slopes: the Conveyor could overturn, causing damage to the machine or injury to the operator and/or bystanders.
OPERATOR RESPONSIBILITY
Do not climb, sit or ride on the Conveyor. It is important to know how to stop the Conveyor quickly in case of emergency. Understand the use of all Conveyor controls. Never permit anyone
to operate the Conveyor without proper instruction. Do not let children operate the Conveyor.
Your safety is your responsibility.
SAFE OPERATING PRECAUTIONS
- Even if you have operated other Conveyors, to take time to become familiar with how the Centurion Pro works.
- Never operate Centurion Pro machines while under the inuence of drugs, alcohol or prescriptions, including over-the-counter cold/u/allergy medications.
- Protective clothing and eye and/or hearing protection should be worn during operation.
- For your safety, do not operate while wearing loose tting clothing, jewelry, etc..
- Rotating machinery parts can entangle loose clothing, long hair or dangling jewelry resulting in serious injury or death.
- Long hair should be secured in a manner that keeps it away from mechanical parts.
SAFETY
BEFORE YOU START

For more information or to watch our video tutorials visit cprosolutions.com
OWNERS MANUAL
BUCKER CONVEYOR
5
SPEED CONTROL BOX
LEG MOUNT
LEG ASSEMBLY
MOTOR MOUNT
CONVEYOR PULLEY
MOTOR MOTOR COVER
MOTOR PULLEY
CONNECT POWER CORDS
1. Connect the Conveyor power cord to a 15Amp 120V(NA) / 220V (EU,
AUS) circuit. Do not connect and disconnect the power cord with
wet hands. Do not operate in the rain.
STARTING THE MACHINE
1. Flip the MOTOR SWITCH to the ON position.
2. Turn the SPEED dial clockwise to set the desired speed, start o at
the lowest setting and increase as required.
STOPPING THE MACHINE
1. At any other time, turn the SPEED dial counter-clockwise, until it
aligns with the ZERO.
2. Turn the MOTOR SWITCH to the OFF position.
3. Disconnect the Conveyor’s power cord.
NOTICE: In an emergency, turn the motor switch to the OFF position.
CONVEYOR
BELT
GUARD
VARIABLE SPEED CONTROL
COMPONENTS - BUCKER CONVEYOR
IMPORTANT NOTE:
THE MOTOR & SPEED CONTROL
BOX ARE NOT WATER-PROOF.
DO NOT GET THEM WET.
* Make sure the machine is unplugged when doing any cleaning or maintenance.
* The Motor & Speed Control Box are not waterproof. Do not get them wet.
* The Speed Control Box comes with a 2 year warranty.

6cprosolutions.com1 855 535 0558
ASSEMBLY
CONVEYOR
BELT ADJUSTMENT
STEP 1 - TRACKING
IF THE BELT IS TRACKING TOWARDS THE
MOTOR SIDE RAILS, RUN THE CONVEYOR
SLOWLY AND TIGHTEN THE MOTOR SIDE
TENSIONER BOLT 1/4 TURNS UNTIL THE
BELT STARTS TO TRAVEL AWAY FROM THE
RAIL. LOOSEN SLIGHTLY TO STOP THE BELT
FROM TRACKING IN OPPOSITE DIRECTION.
STEP 2 - TRACKING
IF THE BELT IS TRACKING TOWARDS THE
NON-MOTOR SIDE RAILS, TIGHTEN THE
NON-MOTOR SIDE TENSIONER BOLT
1/4 TURNS UNTIL THE BELT STARTS TO
TRAVEL AWAY FROM THE RAIL. LOOS-
EN SLIGHTLY TO STOP THE BELT FROM
TRACKING IN THE OPPOSITE DIRECTION.
ADJUSTING THE BELT TENSION PROPERLY WILL ENSURE THE BELT IS RUNNING STRAIGHT. AFTER CLEANING OR MAINTENANCE TIGHTEN
TENSIONER BOLTS EVENLY ON THE END OPPOSITE THE MOTOR UNTIL THE BELT IS SLIGHTLY SAGGING UNDERNEATH. SIMPLY TIGHTENING
YOUR TENSIONERS EQUALLY UNTIL THE BELT DOES NOT SLIP ON THE DRIVE PULLEY IS SUFFICIENT FOR TENSIONING THE BELT. ROTATING
THE TENSIONER BOLT CLOCK-WISE WILL TIGHTEN THE BELT, COUNTER CLOCK-WISE WILL LOOSEN. THE TWO ROLLERS SHOULD BE PERPEN-
DICULAR TO THE SIDE RAILS AND PARALLEL TO EACH OTHER TO ENSURE PROPER ALIGNMENT.
NOTE: UNDER TENSIONING AND OVER TENSIONING CAN CAUSE THE BELT TO SLIP.
TENSIONER BOLTSMOTOR
TIGHTEN
2
TIGHTEN
1
IMPORTANT:
UNDER TENSIONING
AND OVER TENSIONING
CAN CAUSE BELT TO SLIP
STEP 3
ENSURE THAT ALL BOLTS ON CONVEYOR AND CONVEYOR
LEGS ARE TIGHT USING WRENCH AND ALLEN WRENCH.
3/16" T-HANDLE ALLEN WRENCH.
9/16" WRENCH.
STEP 2
INSTALL CONVEYOR GUARDS TO TOP OF CONVEYOR
SIDE RAILS AS SHOWN. THE NUTS REQUIRED ARE
IN TOP SLOT OF CONVEYOR RAIL. TO RETRIEVE, RE-
MOVE BLACK END CAP FROM END OF THE RAIL AND
SLIDE NUTS INTO PLACE.
STEP 1
CONNECT THE CONVEYOR BED AND THE CONVEY-
OR LEGS AS FIGURE ILLUSTRATES. MAKE SURE THAT
THE CONVEYOR BED IS CENTERED ON THE CONVEY-
OR LEGS. TIGHTEN BOLTS AND NUTS TOGETHER.
3/16" T-HANDLE ALLEN WRENCH.
9/16" WRENCH.
1
2

For more information or to watch our video tutorials visit cprosolutions.com
OWNERS MANUAL
BUCKER CONVEYOR
7
BUCKER CONVEYOR
Input Voltage 1.1 Amp - 120V 60 Hz, NA
0.55 Amp - 220V 50 Hz, EU/AUS
Bucker Conveyor Dimensions
(L x W x H)
60in x 7in x 20-25in
152cm x 18cm x 51-64cm
Bucker Belt Dimensions (L x W) 60in x 3.5in
152cm x 9cm
Belt Material Polyurethane, 1.3mm, Food Grade
Motor Horsepower 1/8 HP
Speed Range 0-10 in/s
Warranty 1 year
SPECIFICATIONS
CLEANING
CONVEYOR
BUCKER CONVEYOR:
POSITION THE BUCKER OVER TOP OF THE CONVEYOR SO THAT
PRODUCT CAN DROP ONTO THE CONVEYOR. THE CONVEYORS
HEIGHT CAN BE ADJUSTED BY LOOSENING THE BOLTS ON
EACH OF THE LEGS. ONCE IN POSITION, PRESS DOWN THE
LOCKING CASTORS ON THE TRIMMER AND CONVEYOR TO
PREVENT MOVEMENT.
CONVEYOR POSITIONING
4
3
STEP 2
LOOSEN TENSIONER BOLT USING WRENCH.
ADJUST BOTH SIDES EQUALLY TO HOLD THE
CONVEYOR SQUARE.
STEP 3
THERE SHOULD NOW BE SLACK IN THE CON-
VEYOR BELT, WHICH WILL ALLOW ONE PER-
SON TO HOLD THE BELT UP, WHILE THE OTHER
CLEANS UNDERNEATH THE BELT.
STEP 1
SPRAY BELT WITH A DISH SOAP AND WATER SOLU-
TION, AND WIPE CLEAN WITH A SOFT CLOTH.
RINSE. THOROUGHLY DRY WITH SOFT CLOTH.
STEP 4
PULL BELT AWAY FROM ROLLERS. CLEAN AROUND
THE ENTIRE ROLLER ON EACH END. WIPE THE
CONVEYOR FRAME TO CLEAN OFF ANY RESIDUE.
ONLY USE ISOPROPYL ALCOHOL ON METAL COMPONENTS.
STEP 5
TIGHTEN TENSIONER BOLT USING WRENCH UN-
TIL CONVEYOR IS TIGHT, ENSURE TO DO BOTH
SIDES EVENLY TO KEEP CONVEYOR BELT SQUARE.
IF THE CONVEYOR STARTS TRACKING TO ONE SIDE, AD-
JUST THE TENSIONING BOLTS TO CORRECT. SEE BELT AD-
JUSTMENT INSTRUCTIONS.

cprosolutions.com
1 855 535 0558
[email protected]
FOLLOW US ON: