Cerio POE-STG User manual

POE-STG
10/100/1000M Gigabit 802.3at to 24W PoE / DC
Passive PoE Adapter
Quick Installation Guide
FCC Warning
This device has been tested and found to comply with limits
for a Class A digital device, pursuant to Part 15 of FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment
is operated in a commercial environment. This equipment
can assist in generating radio frequency energy when used
with wireless devices and, if not installed and used in
accordance with the user’s manual, it may cause
interference in which case users will be required to correct
interference at their own expenses.
CE Warning
This is a Class A product. In a domestic environment, this
product, when used with wireless devices, may cause radio
interference in which case the user may be required to take
adequate measures.
Introduction
Cerio’s POE-STG adapter effectively allows any PoE device
to become compliant with 44~57V 802.3at PoE standards.
This conveniently standardizes power management of your
system by introducing compatibility of passive PoE devices with
standard 802.3at switches. POE-STG’s hardware design
includes two 10/100/1000Mbps gigabit Ethernet ports, and
one DC power input jack.
Package Contents
Before using POE-STG, please verify your package that
contains the following items:
•
POE-STG Main Unit x 1
•
Power Adapter x 1
•
Warranty Card x 1
•
Quick Installation Guide x 1
Note: If any of these items is found missing or damaged, please
contact your local supplier for replacement.
Product Features
•
Transform all Cerio Access Points into 802.3at/af
compatible devices
•
Supports dual functionality as a 24W PoE Adapter or a
24W PoE Injector
•
Up to 100 meters (328 feet) application
Feature Details
802.3af/at Compatibility
POE-STG is perfect for transforming Cerio access points
that use a passive PoE design into 802.3at compliant
devices. Other applications also include deploying passive
PoE IP cameras with standard 802.3at PoE switches.
Dual Functionality
Users can optionally select whether to use a PoE PSE or DC
power adapter as the power source, with both methods
providing passive PoE output for APs and other PoE
devices.
Long Distance Application
POE-STG can provide both gigabit data and power for
distances of up to 100 meters (328 feet) from the power
source when using CAT 6 cabling.

POE-STG as Passive PoE Adapter with PoE Switch
Notice: POE-STG can be used with any 802.3af/at PoE switch
to convert standard PoE power to Passive PoE. The adapter
uses standard 802.3af/at power input method. When connected
to a PoE switch, POE-STG does not need to use the DC power
input jack.
POE-STG as Passive PoE Adapter with PoE Injector
Notice: POE-STG can be used with any 802.3af/at PoE injector to
convert standard PoE power to Passive PoE. The adapter uses
standard 802.3af/at power input method. When connected to a
PoE injector, POE-STG does not need to use the DC power input
jack.
-STG as Passive 24V PoE Injector
Notice: Users must use the bundled 24W power adapter to avoid
complications when using this device. Using foreign power
adapters can cause device complications and will not be covered
by product warranty.
Notice: When POE-STG is connected to two power source
devices (DC Power input and PoE-in Ethernet input), the device
will automatically prioritize the DC power over the PoE power
source.
Technical Specifications
Network
Standards
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
IEEE802.3at Power over Ethernet Plus
IEEE802.3af Power over Ethernet
Network Data
Transfer Rate
Ethernet : 10Mbps (Half-duplex) ,
20Mbps(Full-duplex)
Fast Ethernet : 100Mbps( Half-duplex) ,
200Mbps (Full-duplex)
Giga Ethernet : 1000Mbps
Half-duplex ),2000Mbps(Full-duplex)
Data PIN 1/2,3/6 & 4/5+ 7/8
Power
Requirement
802.3af/at 44V~57V POE+ Ethernet source (Used
as a Gigabit Passive PoE Converter to
Midspan B-Type)
DC24V / 48 / 52V / 56V Voltage (Used as a
Gigabit DC Injector
to Midspan B-Type)
PoE Output
Voltage
Used as Gigabit converter: 24V, 24watt (Max).
(Gigabit Proprietary Passive PoE)
Used as Gigabit DC injector: 12V~56V, 56Watt
(Max). PoE Wattage based on DC power source
(Gigabit Proprietary Passive PoE)
PoE Output
Current
1A (Max.)
Operating
Temperature
0° to 60° C
A.
B.
C.